NXP Semiconductors

LPC1754FBD80 - 100MHz Cortex-M3 MCU with USB | NXP

MPN: LPC1754FBD80 ✓ Aktif
2.5 V or 3.3 V Vdss 80-pin LQFP, 12 mm x 12 mm Package 100 MHz Speed 128 KB Memory
MOQ: 1 |

LPC1754FBD80 Ringkasan

The NXP Semiconductors LPC1754FBD80 is a high-performance, 32-bit ARM Cortex-M3 microcontroller operating at 100 MHz, with 128 KB of flash memory and 32 KB of SRAM in an 80-pin LQFP package. The device integrates USB connectivity and belongs to the LPC1700 family, combining a high clock rate with extensive peripheral support for embedded applications.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ARM Cortex-M3 core provides a 32-bit instruction set and efficient event-driven execution suitable for industrial control, communications, and connected equipment. Within the product hierarchy, the LPC1754FBD80 is an ARM Cortex-M3 MCU, then a 32-bit microcontroller, and finally a general-purpose embedded processor.

The LPC1754FBD80 includes 128 KB of flash for firmware and 32 KB of SRAM for working data. Its integrated USB interface supports designs that need USB connectivity without adding a separate host controller. Additional LPC1700-family peripherals include Ethernet, USB 2.0 host, OTG, device, and CAN 2.0B support at the family level. These interfaces reduce the component count in industrial gateways, USB equipment, and communication controllers.

The 100 MHz Cortex-M3 core supports computationally intensive control loops and responsive protocol handling while retaining the deterministic behavior expected from embedded software. The device operates from 2.5 V or 3.3 V supply rails, allowing integration with common industrial and consumer logic levels. Its 80-pin LQFP package provides enough external connectivity for buses, sensors, communications, and mixed-signal interfaces.

Typical applications include USB-enabled test equipment, industrial data acquisition, CAN-connected factory systems, Ethernet gateways, and compact embedded controllers. Designers can use the USB device interface for configuration and diagnostics, Ethernet for network connectivity, and CAN for robust industrial communications. Firmware development follows the standard ARM Cortex-M3 ecosystem, including startup code, linker configuration, debugging, and peripheral drivers.

PCB implementation requires careful attention to the 80-pin footprint, exposed ground and supply connections, and the device's decoupling requirements. Place bulk and high-frequency bypass capacitors close to their associated power pins, route clock and high-speed USB signals away from noisy sources, and verify signal integrity and power sequencing in the final layout.

This product page combines the NXP device identity and package information with cross-reference analysis and practical design guidance. It also distinguishes exact drop-in candidates from ordering-code variants so engineers can evaluate replacements without confusing mechanical compatibility with functional qualification.

Alternatif penggantian untuk LPC1754FBD80 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LPC1754FBD80 (sama faktor bentuk dan footprint) — berbeda di dalam Package.

NXP Semiconductors
Package: 80-pin LQFP, 12 x 12 mm
Bandingkan dengan LPC1754FBD80 →

LPC1754FBD80K

✅ Drop-In
NXP Semiconductors
📦 LQFP-80
32-bit ARM Cortex-M3 microcontroller · ARM Cortex-M3 · 100 MHz · 128 KB · 32 KB · Device, Host, and OTG · 8 channels · 4 channels

Kontak untuk harga

Lihat Datasheet →

LPC1754FBD80 Rating Maksimal & Karakteristik Listrik

Product Type 32-bit ARM Cortex-M3 microcontroller
Maximum CPU Frequency 100 MHz
Flash Memory 128 KB
SRAM 32 KB
Core Architecture ARM Cortex-M3
Tegangan Pemuat Kerja 2.5 V or 3.3 V
Paket 80-pin LQFP, 12 mm x 12 mm
Tipe Mounting Surface mount
Integrated USB Yes, USB 2.0 device, host, and OTG support
Ethernet Support Yes, LPC1700-family Ethernet support
CAN Support Yes, CAN 2.0B family support

LPC1754FBD80 80-pin lqfp, 12 mm x 12 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk LPC1754FBD80 (80-pin lqfp, 12 mm x 12 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 80-pin lqfp, 12 mm x 12 mm untuk LPC1754FBD80

Tidak ada data diatribut pin yang tersedia untuk LPC1754FBD80.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

LPC1754FBD80 cocok untuk 6 aplikasis: USB-Enabled Industrial Control, USB Test and Measurement Instrument, CAN-Connected Factory Gateway, Ethernet and USB Communications Hub, Portable Data-Acquisition Controller, Embedded Security and Access Controller.

🏭

USB-Enabled Industrial Control

The LPC1754FBD80 fits industrial controllers that combine a 100 MHz control loop with USB service connectivity. Its 128 KB flash stores application firmware, monitoring logic, and USB descriptors, while 32 KB SRAM supports real-time state, buffers, and protocol handling. The device can execute control tasks while exposing configuration, diagnostics, or logged data through a USB device interface. Place the USB transceiver and its specified protection network near the connector, keep the data path away from switching power nodes, and follow the manufacturer layout guidance for decoupling and signal return. The 2.5 V or 3.3 V operating options also permit integration with common industrial logic levels, although external isolation and level translation remain necessary where field-side interfaces require them.

🖥️

USB Test and Measurement Instrument

The LPC1754FBD80 is appropriate for compact measurement instruments that use USB as a control and data interface. Its 100 MHz ARM Cortex-M3 core provides sufficient throughput for acquisition sequencing, calibration, status processing, and USB command handling, while 128 KB flash accommodates firmware and configuration data. The integrated USB capability helps reduce external interface overhead compared with a design using a separate USB controller. For instruments with Ethernet connectivity, an Ethernet transceiver can be paired with the MCU's LPC1700-family Ethernet support. Validate analog isolation, grounding, connector protection, and USB enumeration behavior in the final measurement architecture rather than treating the MCU as a substitute for signal-conditioning hardware.

🏭

CAN-Connected Factory Gateway

The LPC1754FBD80 supports factory gateways that bridge CAN equipment to a central network or service interface. The Cortex-M3 core can process CAN traffic, maintain device state, and run communication protocols at 100 MHz, while the 128 KB flash provides space for gateway firmware and update logic. Use the LPC1700-family CAN capability with a suitable transceiver such as the TJA1057, and reserve the Ethernet or USB interface for configuration, diagnostics, or upstream connectivity. Power-system design should include transient protection and filtering appropriate to industrial wiring. Validate bit timing, bus termination, isolation strategy, and error recovery against the CAN 2.0B implementation described in the NXP documentation.

🌐

Ethernet and USB Communications Hub

The LPC1754FBD80 is suited to embedded communications equipment that presents a local USB interface while also supporting the Ethernet capabilities of the LPC1700 family. The 100 MHz processor can supervise protocol processing and traffic management, and the 128 KB flash supports networking firmware, configuration storage, and service code. A physical-layer device such as KSZ8041 or LAN7500 can implement the Ethernet copper interface where the required clocks, magnetics, and signal conditioning are appropriately designed. USB and Ethernet paths should be routed as controlled-impedance interfaces, with ESD protection placed near external connectors. Validate boot ordering, firmware update mechanisms, thermal performance in enclosed equipment, and Ethernet compliance against the selected companion devices.

📱

Portable Data-Acquisition Controller

The LPC1754FBD80 can serve as the control center of a compact portable data-acquisition unit. Its 100 MHz core supports sensor timing, filtering, sampling control, and real-time data preparation, while 32 KB SRAM accommodates working buffers for shorter acquisition bursts. Firmware and configuration can occupy the 128 KB flash, and USB provides a convenient connection for configuration and data transfer. The device's 2.5 V or 3.3 V supply options simplify integration with mixed-signal designs, although low-noise analog circuitry may require separate regulation. Validate sensor settling, isolation requirements, acquisition latency, thermal drift, and USB full-speed or high-speed topology against the external signal chain and enclosure conditions.

🔒

Embedded Security and Access Controller

The LPC1754FBD80 fits embedded access-control equipment that performs protocol handling, local decisions, status reporting, and USB service functions. Its 100 MHz Cortex-M3 core has ample performance for state-machine processing and communication tasks, and 128 KB flash can store control firmware and fixed configuration. The LPC1700 peripheral set can support Ethernet or CAN links when the system requires remote administration or bus interoperability. Keep credential storage, key material, and any production secret outside ordinary firmware wherever possible, and use the device's security features only as defined by the manufacturer documentation. Validate lockout behavior, update rollback policy, physical tamper response, and watchdog recovery before deployment in access-control applications.

What are the key specifications of LPC1754FBD80 that engineers should know?
The LPC1754FBD80 is a 100 MHz, 32-bit ARM Cortex-M3 microcontroller with 128 KB of flash, 32 KB of SRAM, USB connectivity, and an 80-pin LQFP package. According to the NXP LPC1754 product information, it operates from 2.5 V or 3.3 V and is an active member of the LPC1700 family. The combination of 100 MHz processing, 128 KB program memory, and integrated USB makes it suitable for control systems, communications equipment, data acquisition, and USB-enabled embedded products.
Where can I download the LPC1754FBD80 datasheet PDF?
The official NXP LPC1754FBD80 product page provides access to the manufacturer datasheet and supporting documentation. Use the documentation link on the NXP part page to obtain the current LPC1754 datasheet and the LPC17xx user manual. The 80-pin pin configuration, electrical limits, USB requirements, clocking information, and peripheral descriptions should be checked in those documents before schematic capture or PCB layout.
Where can I find the LPC1754FBD80 pinout?
The LPC1754FBD80 pinout is documented in the NXP manufacturer datasheet, which contains the numbered LQFP80 connection diagram, signal names, and alternate-function tables. Use the pin-description table when assigning power, ground, reset, clock, debug, USB, and communications signals. Because the published package has 80 physical positions, do not infer a shortened pin map from lower-pin-count members of the LPC1700 family.
What is the difference between LPC1754FBD80 and LPC1754FBD80K?
LPC1754FBD80 and LPC1754FBD80K both identify the same 100 MHz LPC1754 device in an 80-pin LQFP package with 128 KB flash, according to manufacturer and distributor product information. Their core, memory, and principal connectivity are therefore closely matched. The distinguishing suffix can reflect ordering, temperature, or packaging attributes, so confirm the exact NXP ordering information and full datasheet before treating one as a production substitute.
Is LPC1754FBD80 suitable for USB and industrial control applications?
The LPC1754FBD80 is suitable for USB-enabled industrial and embedded control because it combines a 100 MHz Cortex-M3 core with 128 KB flash, 32 KB SRAM, USB connectivity, Ethernet-family support, and CAN 2.0B support. It can host USB peripheral control, industrial protocol handling, and real-time control logic in one device. Validate USB signal routing, transceiver requirements, peripheral sharing, and timing in the specific system design.
Where can I buy LPC1754FBD80 online?
Use the Request a Quote form on this page to request LPC1754FBD80 availability, current unit pricing, and delivery information. The form allows buyers to specify the required quantity, package ordering code, and production quantity without relying on a stale static price table. Confirm the exact LPC1754FBD80 ordering code, 80-pin LQFP package, and production requirements when submitting the request.
What is the price of LPC1754FBD80?
Current LPC1754FBD80 pricing should be obtained through the Request a Quote form on this page because market conditions and quantity can change quotations rapidly. Include the required order quantity, target delivery date, and whether the order is for prototype or production use. The form also helps distinguish the base device from related ordering codes that use different suffix or reel-format conventions.
What is the lead time for LPC1754FBD80?
The current lead time for LPC1754FBD80 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled delivery, and inventory status, so provide the production schedule when requesting a quotation. For a new design, request confirmation of the exact ordering suffix, package form, and any trace or assembly requirements.
Is LPC1754FBD80 in stock?
Use the Request a Quote form on this page for a current LPC1754FBD80 stock and availability response. The NXP product page identifies the device as active, while actual inventory and delivery schedules can vary by quantity and order configuration. State your required quantity and target date so the quotation can reflect the correct production commitment.
What can replace LPC1754FBD80?
LPC1754FBD80K is the closest documented drop-in candidate because it retains the 100 MHz Cortex-M3 configuration, 128 KB flash, 32 KB SRAM, 80-pin LQFP package, and 2.5 V or 3.3 V operation. It is an NXP ordering variant rather than a different-family MCU. Confirm temperature grade, packaging suffix, marking, and lifecycle terms with the manufacturer before production substitution.
Is LPC1754FBD80K the same as LPC1754FBD80?
LPC1754FBD80K has the same principal device identity as LPC1754FBD80: both are 100 MHz LPC1754 Cortex-M3 microcontrollers with 128 KB flash and an 80-pin LQFP package. The K suffix may identify a specific ordering configuration, so the devices are closely related but should not be treated as automatically identical without checking the NXP ordering table. Confirm temperature, shipping form, and marking requirements.
When should I choose LPC1754FBD80 over a different microcontroller?
Choose LPC1754FBD80 when a design needs a 100 MHz Cortex-M3 core, 128 KB flash, 32 KB SRAM, and integrated USB in an 80-pin LQFP package. It is especially useful when existing LPC1700 software, USB connectivity, Ethernet, or CAN capability reduces development effort. Choose another MCU when smaller packages, lower power, larger memory, different peripherals, or a different long-term product roadmap better match the design.
What is the best NXP equivalent for LPC1754FBD80?
LPC1754FBD80K is the best directly identified NXP equivalent in the cross-reference information because it preserves the LPC1754 core, 100 MHz operating frequency, 128 KB flash, 80-pin LQFP package, and 2.5 V or 3.3 V supply options. No verified cross-brand, pin-compatible alternative is established. Treat this as a same-device ordering candidate and verify the exact suffix-specific temperature and packaging details.
LPC1754FBD80 vs LPC1758FBD80: which is better for firmware-intensive designs?
LPC1758FBD80 is the better choice when firmware-intensive designs require more flash because the comparison identifies 512 KB flash, versus 128 KB for LPC1754FBD80. LPC1754FBD80 remains appropriate when 128 KB is sufficient and its established USB, Ethernet, and CAN integration is preferred. The two are not interchangeable solely because both use 80-pin packages; memory capacity, firmware requirements, and complete pin-function compatibility must be reviewed.
How should power and USB be implemented around the LPC1754FBD80?
Provide the LPC1754FBD80 from a stable 2.5 V or 3.3 V rail and place the required bypass capacitors close to the appropriate supply and ground pins. USB data lines require a compliant transceiver when the MCU operates as a USB device, and the final layout must follow NXP's USB routing and impedance guidance. Separate analog or communication circuitry from digital return currents to reduce susceptibility to switching noise.

Data referensi engineering untuk LPC1754FBD80 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose LPC1754FBD80 when an embedded design needs a 100 MHz ARM Cortex-M3 controller with 128 KB flash, 32 KB SRAM, USB, and access to the LPC1700 family's Ethernet and CAN peripherals in an 80-pin LQFP package. It is particularly effective when existing LPC1700 firmware, tooling, or board infrastructure reduces development and qualification effort. LPC1754FBD80K is the closest documented drop-in candidate because its core, memory, package, frequency, and supply configuration match; verify its suffix-specific ordering attributes before substitution. Do not choose a smaller-package MCU unless board area is more important than the LPC1754's 80-pin connectivity, and do not choose a larger-memory MCU unless 128 KB of flash is insufficient. Cross-brand alternatives should not be selected without a separate pin-function, firmware, clock, USB, and peripheral compatibility review.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LPC1754FBD80K
Package 80-pin LQFP 80-pin LQFP
Brand NXP Semiconductors NXP Semiconductors
CPU Core ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 100 MHz 100 MHz
Flash Memory 128 KB 128 KB
SRAM 32 KB 32 KB
Operating Supply Voltage 2.5 V or 3.3 V 2.5 V or 3.3 V
USB Connectivity Integrated USB Integrated USB
Communications Peripherals Ethernet and CAN 2.0B family support Ethernet and CAN 2.0B family support
Ordering Attribute Base LPC1754FBD80 ordering code K-suffixed ordering code; confirm exact manufacturer ordering attributes

Diferensiator Kunci

  • Provides the full 100 MHz Cortex-M3 configuration in the same 80-pin LQFP footprint (vsLPC1754FBD80K)
  • Integrates USB with substantial local memory (vsLPC1754FBD80K)
  • Supports industrial communication connectivity in one microcontroller (vsLPC1754FBD80K)

Catatan Desain

Plan the 2.5 V or 3.3 V supply with the decoupling arrangement and voltage tolerances specified by NXP. Place bulk capacitance near the entry point and high-frequency bypass capacitors adjacent to the relevant device supply pins. Keep USB transceiver, Ethernet physical-layer, and transceiver return currents away from sensitive analog return paths. If the board also powers motors, relays, or actuators, isolate those noisy loads so their switching transients do not propagate into the microcontroller rail.

Use the manufacturer LQFP80 land pattern and pin-description table rather than a generic 80-pin symbol. Maintain short, continuous return paths beneath high-frequency interfaces and observe the specified USB trace geometry. ESD protection should be close to the external connector, while common-mode chokes or other impedance-control devices should be selected according to the actual connector and cable environment. Review courtyard, solder mask, and assembly clearance before releasing the footprint.

Do not treat LPC1754FBD80, LPC1754FBD80K, LPC1754FBD80,551, and LPC1754FBD80,518 as automatically interchangeable. Ordering-code suffixes may distinguish temperature grade, packing form, or customer-facing order conventions. Compare the complete NXP ordering information, confirm the 80-pin footprint, and verify boot, debug, clock, USB, and peripheral functions before approving a substitution. For firmware-sensitive designs, retain the exact suffix in the tested BOM.

LPC1700-family devices can multiplex pins among USB, Ethernet, CAN, timers, and general-purpose I/O. Build the pin-assignment table early and avoid assigning a peripheral function until its alternate-function availability has been checked against the actual package. Leave required clock, reset, debug, and ground pins uncommitted, and ensure firmware, bootloader behavior, and peripheral clock configuration match the physical pin map.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The NXP product page identifies the device as active. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product-change and environmental documents.

Data disahkan pada: 2026-11-15 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

lpc1754fbd80 datasheet nxp lpc1754fbd80 LPC1754FBD80 datasheet pdf LPC1754FBD80 pinout LPC1754FBD80 equivalent LPC1754FBD80 replacement LPC1754FBD80 cross reference LPC1754FBD80 price LPC1754FBD80 stock LPC1754FBD80 LQFP80 footprint LPC1754FBD80 Cortex-M3 specifications LPC1754FBD80 USB application circuit LPC1754FBD80 vs LPC1754FBD80K LPC1754FBD80 vs LPC1758FBD80 NXP LPC1754FBD80 100MHz

Komponen dan Istilah Terkait

NXP Semiconductors LPC1754FBD80 LPC1754FBD80K LPC1758FBD80 ARM Cortex-M3 32-bit microcontroller embedded microcontroller microprocessor semiconductor LPC1700 series USB 2.0 USB OTG CAN 2.0B Ethernet 128 KB flash memory 32 KB SRAM 100 MHz clock 2.5 V supply 3.3 V supply LQFP-80 LQFP package family surface-mount package industrial control USB test equipment CAN gateway
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ