NXP Semiconductors

LPC4313JET100551 - Dual-Core 204 MHz MCU | NXP

MPN: LPC4313JET100551 ✓ Aktif
100-TFBGA, 9 mm x 9 mm Package 204 MHz Speed 512 KB (512K x 8) Memory
MOQ: 1 |

LPC4313JET100551 Ringkasan

NXP Semiconductors LPC4313JET100551 is a dual-core ARM Cortex-M4/M0 microcontroller rated at up to 204 MHz, with 512 KB of embedded flash memory, and supplied in a 100-ball TFBGA package measuring 9 mm by 9 mm. The device combines an Arm Cortex-M4 application processor with an Arm Cortex-M0 coprocessor in one package, providing dedicated real-time control alongside a higher-performance main core.

A dual-core microcontroller is an embedded processing device in which two independent processor cores share a package and memory system but can execute different tasks. The Cortex-M4 core handles operating systems, communications, and application processing, while the Cortex-M0 coprocessor can support deterministic peripheral control, state-machine workloads, or signal-processing tasks. This arrangement improves concurrency without requiring two discrete microcontrollers on the board.

The LPC4313JET100551 provides 204 MHz processing performance, 512 KB of flash storage, and up to 136 kB of on-chip SRAM according to the NXP LPC435x/3x/2x/1x family description. Its peripherals include a configurable State Configurable Timer, Serial General Purpose I/O interface, quad SPI Flash Interface, Ethernet-capable high-speed interfaces, and an Arm Cortex-M0 coprocessor. These resources suit connected industrial, communications, and embedded control systems that need both performance and deterministic I/O handling.

The architecture separates supervisory and real-time workloads across the Cortex-M4 and Cortex-M0 cores. Firmware can assign communication protocols, protocol stacks, or application logic to the main core while assigning time-critical sampling and control routines to the coprocessor. Inter-core synchronization and peripheral access must still be designed carefully, because the cores do not remove the need for deterministic interrupt and memory-access planning.

Typical uses include industrial gateways, motor and motion-control systems, network-connected embedded equipment, data acquisition units, and communication infrastructure. The 204 MHz Cortex-M4 core supports responsive protocol handling and control logic, while the Cortex-M0 core can reduce the latency burden of repetitive peripheral tasks. The 100-TFBGA package also favors compact, multilayer PCB designs where ball pitch and escape routing require deliberate layout planning.

For a new PCB, use the NXP pin-description table and recommended power, decoupling, clock, and ground connections when assigning the 100-ball footprint. Because the complete BGA pin assignment is not reproduced on this page, verify every ball location and power boundary against the manufacturer documentation before fabrication. Production software should also confirm device revision, peripheral availability, bootloader configuration, and the exact ordering suffix.

This page combines the manufacturer family architecture, exact LPC4313JET100551 commercial identifiers, same-package replacement analysis, and practical implementation guidance. It also distinguishes the target ordering code from related NXP LPC43xx variants so engineers can evaluate replacement risk before committing to a board spin.

Alternatif penggantian untuk LPC4313JET100551 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LPC4313JET100551 (sama faktor bentuk dan footprint) — berbeda di dalam Embedded Flash Memory, Mounting Type, Package, Product Type, RoHS Status.

NXP Semiconductors
Embedded Flash Memory: 512 KB
Mounting Type: Surface mount
Package: 100-ball TFBGA, 9 mm x 9 mm
Bandingkan dengan LPC4313JET100551 →

LPC4313JET100E

✅ Drop-In
NXP Semiconductors
📦 100-TFBGA (9x9)
32-bit dual-core microcontroller · Arm Cortex-M4 and Arm Cortex-M0 · 204 MHz · 512 KB · 136 KB · 1 Ethernet interface · 2 high-speed USB interfaces

Kontak untuk harga

Lihat Datasheet →

LPC4313JET100E

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
NXP Semiconductors
📦 100-TFBGA (9x9)
32-bit dual-core microcontroller · Arm Cortex-M4 and Arm Cortex-M0 · 204 MHz · 512 KB · 136 KB · 1 Ethernet interface · 2 high-speed USB interfaces

Kontak untuk harga

Lihat Datasheet →

LPC4313JET100B

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-TFBGA (9x9)
Same LPC4313JET100 family and footprint; B suffix may change the orderable qualification configuration relative to the 551 code.

📋 Alternatif referensi (tidak dalam katalog)

LPC4313JET100C

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-TFBGA (9x9)
Same LPC4313JET100 family and footprint; C suffix may change the orderable qualification configuration relative to the 551 code.

📋 Alternatif referensi (tidak dalam katalog)

LPC4313JET100D

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-TFBGA (9x9)
Same LPC4313JET100 family and footprint; D suffix may change the orderable qualification configuration relative to the 551 code.

📋 Alternatif referensi (tidak dalam katalog)

LPC4313JET100551 Rating Maksimal & Karakteristik Listrik

Product Type Dual-core ARM Cortex-M4/M0 microcontroller
Main Processor Core ARM Cortex-M4
Coprocessor Core ARM Cortex-M0
Maximum Processor Frequency 204 MHz
Architecture 32-bit ARM
Embedded Flash Memory 512 KB (512K x 8)
Maximum On-Chip SRAM Up to 136 kB
On-Chip EEPROM Up to 16 kB
External Serial Flash Interface Quad SPI Flash Interface (SPIFI)
Configurable Timer State Configurable Timer (SCT)
Serial GPIO Interface Serial General Purpose I/O (SGPIO)
Paket 100-TFBGA, 9 mm x 9 mm
Tipe Mounting Surface-mount BGA
Number of Terminals 100 terminals
Ethernet Support High-speed Ethernet-capable interfaces
Status RoHS RoHS

LPC4313JET100551 100-tfbga, 9 mm x 9 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk LPC4313JET100551 (100-tfbga, 9 mm x 9 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 100-tfbga, 9 mm x 9 mm untuk LPC4313JET100551

Tidak ada data diatribut pin yang tersedia untuk LPC4313JET100551.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

LPC4313JET100551 cocok untuk 6 aplikasis: Industrial Motor and Motion Control, Industrial Communication Gateway, Data Acquisition and Sensor Hub, Networked Embedded Equipment, Automotive and Transportation Control, Real-Time Control and Monitoring.

🏭

Industrial Motor and Motion Control

The LPC4313JET100551 is well suited to compact motor-control equipment because its 204 MHz Cortex-M4 core can execute motion algorithms and supervisory logic while the Cortex-M0 coprocessor services time-critical peripheral routines. The family also provides a State Configurable Timer for event-driven timing and SGPIO for serialized peripheral access. A practical design can isolate current sampling, encoder handling, or safety-critical state transitions on the coprocessor while the main core manages communications. The 100-TFBGA package supports compact construction, although its 9 mm by 9 mm ball grid requires careful escape routing and multilayer assembly capability.

🌐

Industrial Communication Gateway

LPC4313JET100551 can serve as the processing core of an industrial communication gateway that must combine protocol handling with deterministic I/O. The 204 MHz Cortex-M4 core can manage Ethernet-facing stacks or gateway logic, while the Cortex-M0 coprocessor can monitor serial interfaces, status signals, or periodic events with reduced contention. The NXP LPC435x/3x/2x/1x family description identifies high-speed Ethernet-capable interfaces, SPIFI, SCT, and SGPIO, giving an architecture suited to gateways that need external flash, networked control, and deterministic peripheral response within one device.

🧩

Data Acquisition and Sensor Hub

The dual-core architecture of LPC4313JET100551 supports data-acquisition designs in which acquisition timing and higher-level processing are divided between separate cores. The Cortex-M0 coprocessor can maintain sampling sequences or service sensor-ready interfaces, while the 204 MHz Cortex-M4 core filters, formats, and transfers data. This division can make interrupt scheduling more predictable and reduce the workload placed on the main application processor. The device’s 512 KB of embedded flash provides firmware space for acquisition logic and communication code, while up to 136 kB of on-chip SRAM accommodates active buffers and control state.

🖥️

Networked Embedded Equipment

LPC4313JET100551 is appropriate for connected embedded equipment that needs network communication, control functions, and expandable flash storage in one package. The Cortex-M4 core can support the main communication stack, while the Cortex-M0 coprocessor handles periodic control tasks or auxiliary serial interfaces. The quad SPI Flash Interface provides a path to external nonvolatile storage for logs, firmware images, or configuration data. With a 9 mm by 9 mm TFBGA package, the device can reduce board area, but designers should reserve adequate routing channels for power, ground, high-speed signals, and external-memory connections.

🚗

Automotive and Transportation Control

LPC4313JET100551 can support transportation-control prototypes that benefit from a high-performance application core and a dedicated Cortex-M0 coprocessor. The main core can execute system control and communications software, while the coprocessor can handle repetitive or latency-sensitive I/O operations. The integrated SCT, SGPIO, and Ethernet-capable interfaces enable compact control architectures without requiring a separate microcontroller for every deterministic function. Before production use in an automotive product, verify the exact device temperature grade, AEC-Q100 status, qualification records, and all ordering-code requirements with NXP.

⚡

Real-Time Control and Monitoring

LPC4313JET100551 is well matched to real-time monitoring systems because the Cortex-M0 coprocessor can execute dedicated control tasks while the Cortex-M4 core handles diagnostics, data processing, and communications. A designer can use the State Configurable Timer for precisely triggered events and SGPIO for efficient serialized access to multiple peripheral signals. The 512 KB flash capacity supports moderately complex application firmware, and the dual-core topology provides more scheduling flexibility than a single-core design. Real-time performance still depends on correct interrupt prioritization, shared-peripheral ownership, and careful validation of inter-core synchronization.

Ringkasan Produk Direkomendasikan

LPC4313JET100 Base-ordering LPC4313JET100 family member Digunakan di dalam: Industrial Motor and Motion Control, Industrial Communication Gateway, Data Acquisition and Sensor Hub, Automotive and Transportation Control, Real-Time Control and Monitoring LPC4313JET100E NXP Semiconductors Digunakan di dalam: Industrial Motor and Motion Control, Industrial Communication Gateway, Networked Embedded Equipment, Real-Time Control and Monitoring LPC4313JET100B Same-family orderable configuration Digunakan di dalam: Data Acquisition and Sensor Hub LPC4313JET100C Same-family suffix variant Digunakan di dalam: Networked Embedded Equipment LPC4313JET100D Same-family orderable configuration Digunakan di dalam: Automotive and Transportation Control
What is LPC4313JET100551?
The LPC4313JET100551 is an NXP Semiconductors dual-core 32-bit ARM microcontroller combining an ARM Cortex-M4 processor with an ARM Cortex-M0 coprocessor. According to the NXP LPC435x/3x/2x/1x family description, it operates at up to 204 MHz, includes 512 KB of flash, provides up to 136 kB of SRAM, and uses a 100-TFBGA package measuring 9 mm by 9 mm. It is intended for embedded applications that need concurrent application processing and deterministic peripheral control.
What are the key specifications of LPC4313JET100551 that engineers should know?
The LPC4313JET100551 combines an ARM Cortex-M4 main core and ARM Cortex-M0 coprocessor at up to 204 MHz, with 512 KB of embedded flash and up to 136 kB of on-chip SRAM. The NXP family documentation also identifies a quad SPI Flash Interface, State Configurable Timer, Serial General Purpose I/O interface, and up to 16 kB of EEPROM. The device is offered in a 100-TFBGA package measuring 9 mm by 9 mm. Its main engineering benefit is executing general-purpose and real-time workloads on two integrated cores.
Where can I download the LPC4313JET100551 datasheet PDF?
The official LPC4313JET100551 documentation is accessed through the NXP product page at https://www.nxp.com/part/LPC4313JET100, which links to the family datasheet and supporting documentation. The family is also described as LPC435x/3x/2x/1x, so the download should match that document family. Before designing the PCB or programming the device, verify the pin description, electrical limits, clock requirements, package drawing, and ordering information in the current NXP documentation.
Where is the LPC4313JET100551 pinout?
The LPC4313JET100551 pinout is documented in the NXP LPC435x/3x/2x/1x family datasheet and the package information linked from the official LPC4313JET100 product page. The device uses 100-ball TFBGA construction, so every ball assignment and exposed power connection must be checked against the manufacturer pin-description table. The package drawing is required to confirm orientation and the position of ball A1 before routing escape traces or defining PCB footprints.
What is the difference between the Cortex-M4 and Cortex-M0 cores in LPC4313JET100551?
The LPC4313JET100551 uses an ARM Cortex-M4 core for the main application and an ARM Cortex-M0 core as a coprocessor. According to the NXP family description, the Cortex-M4 handles the higher-performance embedded workload, while the Cortex-M0 can execute time-critical peripheral routines or state-machine tasks. This can reduce contention on the main core, but firmware must define inter-core synchronization, ownership of shared peripherals, and memory-access rules to prevent race conditions.
How much flash and SRAM does LPC4313JET100551 have?
The LPC4313JET100551 has 512 KB of embedded flash memory and supports up to 136 kB of on-chip SRAM for the applicable LPC43xx configuration. The NXP product-page description identifies the part as a Cortex-M4 microcontroller with a Cortex-M0 coprocessor and up to 1 MB of flash across the broader LPC435x/3x/2x/1x family. For this exact ordering code, use the 512 KB value and confirm the SRAM partition and peripheral allocation in the device configuration documentation.
Is LPC4313JET100551 suitable for industrial control and communication systems?
The LPC4313JET100551 is suitable for industrial control and communication systems that benefit from concurrent Cortex-M4 and Cortex-M0 processing. Its 204 MHz main core can support protocol handling and application logic, while the coprocessor can service deterministic I/O or peripheral tasks. According to the NXP family description, the device includes Ethernet-capable high-speed interfaces, SPIFI, SCT, and SGPIO. Qualification for a specific industrial product still requires checking temperature range, isolation, safety, and regulatory requirements.
LPC4313JET100551 vs LPC4313JET100E - which is the better replacement?
LPC4313JET100551 and LPC4313JET100E share the NXP LPC4313JET100 device family and 100-TFBGA architecture, but their ordering suffixes must be checked for temperature grade and packing code. The manufacturer should confirm whether the E-qualified variant meets the operating-temperature and production requirements of the target assembly. For a direct PCB replacement, verify pin functions, flash size, SRAM, clock limits, exposed connections, and all suffix-dependent ordering fields before substitution.
What is the best drop-in replacement for LPC4313JET100551?
The closest documented replacement is the NXP LPC4313JET100E because it belongs to the same LPC4313JET100 family and uses the same 100-TFBGA architecture. However, the suffix can encode qualification and packing information that affects procurement or end-use requirements. Confirm the complete ordering code, temperature grade, package drawing, and production configuration with NXP before treating it as a drop-in replacement. No cross-manufacturer replacement was established with verified pin and parameter equivalence.
What can replace LPC4313JET100551?
LPC4313JET100E is the leading same-family replacement candidate for LPC4313JET100551 because both identify an LPC4313JET100 configuration in a 100-TFBGA package. The replacement is appropriate only after checking the meaning of the E suffix and confirming that the required 204 MHz rating, 512 KB flash, SRAM resources, peripheral set, and operating-temperature grade remain unchanged. A firmware or footprint difference in any of those areas can prevent an unconditional drop-in substitution.
Is LPC4313JET100551 the same as LPC4313JET100E?
LPC4313JET100551 and LPC4313JET100E are closely related NXP ordering codes within the LPC4313JET100 family, but they are not safe to treat as identical without checking the suffix definitions. Both are associated with the 204 MHz Cortex-M4/M0 microcontroller family and 100-TFBGA construction. Verify temperature grade, packing method, lifecycle status, and any orderable configuration differences. The 551 ordering code is the exact identifier to place on the BOM.
When should I choose LPC4313JET100551 over another dual-core microcontroller?
Choose LPC4313JET100551 when the design benefits from an integrated Cortex-M4 main core, a Cortex-M0 coprocessor, 204 MHz processing, and 512 KB of embedded flash. The coprocessor can handle deterministic peripheral work while the main core manages protocols or higher-level application logic. This is particularly useful in compact industrial and communications equipment. Select another device only if its memory, peripheral mix, package, qualification, or ecosystem better matches the product requirements.
Where can I buy LPC4313JET100551 online?
Use the Request a Quote form on this XAIPART product page to request LPC4313JET100551 availability, commercial terms, and lead time for the exact ordering code. Quote requests should state the required quantity, package handling preference, target date, and any qualification requirements. The exact MPN is important because LPC4313JET100 family suffixes may distinguish temperature grade, packing, or other orderable conditions. Confirm the current lifecycle and delivery status when the quotation is prepared.
What is the lead time for LPC4313JET100551?
The current lead time for LPC4313JET100551 should be obtained through the Request a Quote form on this page. Lead time can vary with order quantity, backorder position, package handling, and lifecycle status, so a quantity-specific schedule is more useful than a generic estimate. Include your required delivery date and forecast quantities in the request. Confirm whether any NXP product-change notices or allocation restrictions apply before freezing the production schedule.
Is LPC4313JET100551 in stock?
Current LPC4313JET100551 inventory should be confirmed through the Request a Quote form on this page using the exact MPN. Listing pages can expose a single quoted amount or historical availability without representing a firm stock commitment, particularly for a BGA microcontroller with multiple possible order codes. State the required quantity and packaging preference in the request. For production planning, also request dated delivery information and notification of any allocation changes.
How should a PCB layout handle the LPC4313JET100551 100-TFBGA package?
Design the LPC4313JET100551 layout from the current NXP package drawing and recommended-application schematic, then verify every ball and power connection against the pin-description table. Place local decoupling capacitors close to their intended supply balls, provide a low-impedance ground structure, and route sensitive clock and communication signals away from noisy switching nodes. Because BGA escape routing is constrained, use blind or microvia fanout where appropriate and conduct design-rule and assembly-capability reviews before fabrication.

Data referensi engineering untuk LPC4313JET100551 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose LPC4313JET100551 when an embedded system benefits from a 204 MHz Cortex-M4 core, a separate Cortex-M0 coprocessor, 512 KB of flash, and up to 136 kB of SRAM in one 100-TFBGA device. It is especially attractive for industrial control, communication gateways, acquisition systems, and connected equipment where real-time peripheral work can be separated from higher-level processing. The principal tradeoff is package complexity: a 9 mm by 9 mm BGA requires advanced assembly and careful escape routing. LPC4313JET100E and the other same-family suffix variants may fit an existing footprint, but the suffix must be checked for qualification, temperature, packing, and lifecycle compatibility. Single-core STM8 and NXP MKL devices can simplify software and assembly, yet they offer less concurrency and lower performance. No cross-manufacturer drop-in substitute was established, so changing manufacturers would require a full electrical, firmware, pinout, qualification, and PCB review.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LPC4313JET100E LPC4313JET100 LPC4313JET100B LPC4313JET100C LPC4313JET100D
Package 100-TFBGA (9x9) 100-TFBGA (9x9) 100-TFBGA (9x9) 100-TFBGA (9x9) 100-TFBGA (9x9) 100-TFBGA (9x9)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Ordering Suffix 551 E Base ordering code B C D

Diferensiator Kunci

  • Integrated Cortex-M4 and Cortex-M0 processing (vsSingle-core STM8 family controllers represented by STM8L152C8T3TR)
  • Higher documented operating frequency (vsSTM8L151K4U6TR)
  • Larger integrated memory configuration (vsSTM8S103K3T3TR)
  • Dedicated real-time coprocessor architecture (vsMKL03Z8VFG4R)

Catatan Desain

Use the current NXP package drawing and pin-description table to define the 100-TFBGA footprint, including ball A1 orientation and all exposed or connected balls. Place decoupling capacitors adjacent to the relevant supply balls and provide a continuous, low-impedance ground region beneath and around the device where the package design permits it. Because the 9 mm by 9 mm BGA has a dense escape requirement, plan via-in-pad or microvia fanout with the PCB and assembly suppliers before routing.

Follow the NXP recommended-application schematic for supply sequencing, core and I/O rails, external crystal or clock components, and decoupling values. Separate sensitive analog or low-noise supply filtering from digital switching-current paths where the design permits it. Confirm that every power ball is connected, including any exposed package connection specified by the datasheet. Validate the power-supply ramp and brownout behavior across the full operating range rather than relying only on nominal laboratory conditions.

Assign peripheral ownership explicitly when both Cortex-M4 and Cortex-M0 firmware can access the same hardware. Protect shared-memory transactions with appropriate synchronization, and verify interrupt priorities and peripheral arbitration in the worst-case timing scenario. Route high-speed Ethernet-capable interfaces over controlled-impedance paths with a continuous reference plane, while keeping switching nodes and high-current returns away from clock and communication pins.

Do not substitute a superficially similar LPC43xx ordering code without checking the complete suffix definition. A valid replacement must preserve the 100-TFBGA ballout, 512 KB flash configuration, SRAM resources, clock and electrical limits, peripheral configuration, temperature requirements, and lifecycle status. Also verify that the boot configuration, programming method, and firmware image remain compatible; an identical footprint alone does not establish drop-in software or production compatibility.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The exact LPC4313JET100551 listing identifies RoHS status. Other environmental, automotive-qualification, lead-free, halogen-free, and conflict-minerals declarations were not established for this exact ordering code.

Data disahkan pada: 2026-11-20 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

LPC4313JET100551 datasheet LPC4313JET100551 pinout LPC4313JET100551 specifications LPC4313JET100 datasheet pdf NXP LPC4313JET100551 LPC4313JET100551 204MHz LPC4313JET100551 512KB flash LPC4313JET100551 TFBGA-100 LPC4313JET100551 equivalent LPC4313JET100551 replacement LPC4313JET100551 vs LPC4313JET100E LPC4313JET100551 price LPC4313JET100551 stock LPC4313JET100 application circuit

Komponen dan Istilah Terkait

NXP Semiconductors LPC4313JET100551 LPC4313JET100E LPC4313JET100 LPC4313JET100B LPC4313JET100C LPC4313JET100D ARM Cortex-M4 ARM Cortex-M0 dual-core microcontroller embedded microcontroller 32-bit microcontroller microcontroller semiconductor 204 MHz processor 512 KB embedded flash 136 kB SRAM 16 kB EEPROM SPIFI State Configurable Timer Serial General Purpose I/O Ethernet-capable interface 100-TFBGA BGA package surface-mount package RoHS industrial control motor control communication gateway data acquisition real-time control
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ