LPC4313JET100551 - Dual-Core 204 MHz MCU | NXP
MPN: LPC4313JET100551 ✓ فعالLPC4313JET100551 جائزہ
A dual-core microcontroller is an embedded processing device in which two independent processor cores share a package and memory system but can execute different tasks. The Cortex-M4 core handles operating systems, communications, and application processing, while the Cortex-M0 coprocessor can support deterministic peripheral control, state-machine workloads, or signal-processing tasks. This arrangement improves concurrency without requiring two discrete microcontrollers on the board.
The LPC4313JET100551 provides 204 MHz processing performance, 512 KB of flash storage, and up to 136 kB of on-chip SRAM according to the NXP LPC435x/3x/2x/1x family description. Its peripherals include a configurable State Configurable Timer, Serial General Purpose I/O interface, quad SPI Flash Interface, Ethernet-capable high-speed interfaces, and an Arm Cortex-M0 coprocessor. These resources suit connected industrial, communications, and embedded control systems that need both performance and deterministic I/O handling.
The architecture separates supervisory and real-time workloads across the Cortex-M4 and Cortex-M0 cores. Firmware can assign communication protocols, protocol stacks, or application logic to the main core while assigning time-critical sampling and control routines to the coprocessor. Inter-core synchronization and peripheral access must still be designed carefully, because the cores do not remove the need for deterministic interrupt and memory-access planning.
Typical uses include industrial gateways, motor and motion-control systems, network-connected embedded equipment, data acquisition units, and communication infrastructure. The 204 MHz Cortex-M4 core supports responsive protocol handling and control logic, while the Cortex-M0 core can reduce the latency burden of repetitive peripheral tasks. The 100-TFBGA package also favors compact, multilayer PCB designs where ball pitch and escape routing require deliberate layout planning.
For a new PCB, use the NXP pin-description table and recommended power, decoupling, clock, and ground connections when assigning the 100-ball footprint. Because the complete BGA pin assignment is not reproduced on this page, verify every ball location and power boundary against the manufacturer documentation before fabrication. Production software should also confirm device revision, peripheral availability, bootloader configuration, and the exact ordering suffix.
This page combines the manufacturer family architecture, exact LPC4313JET100551 commercial identifiers, same-package replacement analysis, and practical implementation guidance. It also distinguishes the target ordering code from related NXP LPC43xx variants so engineers can evaluate replacement risk before committing to a board spin.
کے لیے ڈراپ اِن متبادل LPC4313JET100551 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LPC4313JET100551 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Embedded Flash Memory, Mounting Type, Package, Product Type, RoHS Status.
LPC4313JET100E
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LPC4313JET100E
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LPC4313JET100B
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LPC4313JET100C
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LPC4313JET100D
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LPC4313JET100551 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | Dual-core ARM Cortex-M4/M0 microcontroller |
| Main Processor Core | ARM Cortex-M4 |
| Coprocessor Core | ARM Cortex-M0 |
| Maximum Processor Frequency | 204 MHz |
| Architecture | 32-bit ARM |
| Embedded Flash Memory | 512 KB (512K x 8) |
| Maximum On-Chip SRAM | Up to 136 kB |
| On-Chip EEPROM | Up to 16 kB |
| External Serial Flash Interface | Quad SPI Flash Interface (SPIFI) |
| Configurable Timer | State Configurable Timer (SCT) |
| Serial GPIO Interface | Serial General Purpose I/O (SGPIO) |
| پیکیج | 100-TFBGA, 9 mm x 9 mm |
| ماؤنٹنگ ٹائپ | Surface-mount BGA |
| Number of Terminals | 100 terminals |
| Ethernet Support | High-speed Ethernet-capable interfaces |
| RoHS اسٹیٹس | RoHS |
LPC4313JET100551 100-tfbga, 9 mm x 9 mm پن کنفیگریشن گائیڈ
LPC4313JET100551 (100-tfbga, 9 mm x 9 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LPC4313JET100551.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
LPC4313JET100551 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Motor and Motion Control, Industrial Communication Gateway, Data Acquisition and Sensor Hub, Networked Embedded Equipment, Automotive and Transportation Control, Real-Time Control and Monitoring.
Industrial Motor and Motion Control
The LPC4313JET100551 is well suited to compact motor-control equipment because its 204 MHz Cortex-M4 core can execute motion algorithms and supervisory logic while the Cortex-M0 coprocessor services time-critical peripheral routines. The family also provides a State Configurable Timer for event-driven timing and SGPIO for serialized peripheral access. A practical design can isolate current sampling, encoder handling, or safety-critical state transitions on the coprocessor while the main core manages communications. The 100-TFBGA package supports compact construction, although its 9 mm by 9 mm ball grid requires careful escape routing and multilayer assembly capability.
تجویز کردہ
Industrial Communication Gateway
LPC4313JET100551 can serve as the processing core of an industrial communication gateway that must combine protocol handling with deterministic I/O. The 204 MHz Cortex-M4 core can manage Ethernet-facing stacks or gateway logic, while the Cortex-M0 coprocessor can monitor serial interfaces, status signals, or periodic events with reduced contention. The NXP LPC435x/3x/2x/1x family description identifies high-speed Ethernet-capable interfaces, SPIFI, SCT, and SGPIO, giving an architecture suited to gateways that need external flash, networked control, and deterministic peripheral response within one device.
تجویز کردہ
Data Acquisition and Sensor Hub
The dual-core architecture of LPC4313JET100551 supports data-acquisition designs in which acquisition timing and higher-level processing are divided between separate cores. The Cortex-M0 coprocessor can maintain sampling sequences or service sensor-ready interfaces, while the 204 MHz Cortex-M4 core filters, formats, and transfers data. This division can make interrupt scheduling more predictable and reduce the workload placed on the main application processor. The device’s 512 KB of embedded flash provides firmware space for acquisition logic and communication code, while up to 136 kB of on-chip SRAM accommodates active buffers and control state.
تجویز کردہ
Networked Embedded Equipment
LPC4313JET100551 is appropriate for connected embedded equipment that needs network communication, control functions, and expandable flash storage in one package. The Cortex-M4 core can support the main communication stack, while the Cortex-M0 coprocessor handles periodic control tasks or auxiliary serial interfaces. The quad SPI Flash Interface provides a path to external nonvolatile storage for logs, firmware images, or configuration data. With a 9 mm by 9 mm TFBGA package, the device can reduce board area, but designers should reserve adequate routing channels for power, ground, high-speed signals, and external-memory connections.
تجویز کردہ
Automotive and Transportation Control
LPC4313JET100551 can support transportation-control prototypes that benefit from a high-performance application core and a dedicated Cortex-M0 coprocessor. The main core can execute system control and communications software, while the coprocessor can handle repetitive or latency-sensitive I/O operations. The integrated SCT, SGPIO, and Ethernet-capable interfaces enable compact control architectures without requiring a separate microcontroller for every deterministic function. Before production use in an automotive product, verify the exact device temperature grade, AEC-Q100 status, qualification records, and all ordering-code requirements with NXP.
تجویز کردہ
Real-Time Control and Monitoring
LPC4313JET100551 is well matched to real-time monitoring systems because the Cortex-M0 coprocessor can execute dedicated control tasks while the Cortex-M4 core handles diagnostics, data processing, and communications. A designer can use the State Configurable Timer for precisely triggered events and SGPIO for efficient serialized access to multiple peripheral signals. The 512 KB flash capacity supports moderately complex application firmware, and the dual-core topology provides more scheduling flexibility than a single-core design. Real-time performance still depends on correct interrupt prioritization, shared-peripheral ownership, and careful validation of inter-core synchronization.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا LPC4313JET100551 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | LPC4313JET100E | LPC4313JET100 | LPC4313JET100B | LPC4313JET100C | LPC4313JET100D |
|---|---|---|---|---|---|---|
| Package | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Ordering Suffix | 551 | E | Base ordering code | B | C | D |
اہم امتیازی خصوصیات
- Integrated Cortex-M4 and Cortex-M0 processing (بمقابلہSingle-core STM8 family controllers represented by STM8L152C8T3TR)
- Higher documented operating frequency (بمقابلہSTM8L151K4U6TR)
- Larger integrated memory configuration (بمقابلہSTM8S103K3T3TR)
- Dedicated real-time coprocessor architecture (بمقابلہMKL03Z8VFG4R)
ڈیزائن نوٹس
Use the current NXP package drawing and pin-description table to define the 100-TFBGA footprint, including ball A1 orientation and all exposed or connected balls. Place decoupling capacitors adjacent to the relevant supply balls and provide a continuous, low-impedance ground region beneath and around the device where the package design permits it. Because the 9 mm by 9 mm BGA has a dense escape requirement, plan via-in-pad or microvia fanout with the PCB and assembly suppliers before routing.
Follow the NXP recommended-application schematic for supply sequencing, core and I/O rails, external crystal or clock components, and decoupling values. Separate sensitive analog or low-noise supply filtering from digital switching-current paths where the design permits it. Confirm that every power ball is connected, including any exposed package connection specified by the datasheet. Validate the power-supply ramp and brownout behavior across the full operating range rather than relying only on nominal laboratory conditions.
Assign peripheral ownership explicitly when both Cortex-M4 and Cortex-M0 firmware can access the same hardware. Protect shared-memory transactions with appropriate synchronization, and verify interrupt priorities and peripheral arbitration in the worst-case timing scenario. Route high-speed Ethernet-capable interfaces over controlled-impedance paths with a continuous reference plane, while keeping switching nodes and high-current returns away from clock and communication pins.
Do not substitute a superficially similar LPC43xx ordering code without checking the complete suffix definition. A valid replacement must preserve the 100-TFBGA ballout, 512 KB flash configuration, SRAM resources, clock and electrical limits, peripheral configuration, temperature requirements, and lifecycle status. Also verify that the boot configuration, programming method, and firmware image remain compatible; an identical footprint alone does not establish drop-in software or production compatibility.
تعمیل کی معلومات
The exact LPC4313JET100551 listing identifies RoHS status. Other environmental, automotive-qualification, lead-free, halogen-free, and conflict-minerals declarations were not established for this exact ordering code.