Analog Devices

MAX232ACSE+ - +5V RS-232 Transceiver | Analog Devices

MPN: MAX232ACSE+ ✓ Aktif
+5 V Vdss 16-pin SOIC, 3.9 mm nominal body width Package
MOQ: 1 |

MAX232ACSE+ Ringkasan

The Analog Devices MAX232ACSE+ is a +5 V-powered, 2-transmitter and 2-receiver RS-232 interface transceiver packaged in a 16-pin SOIC. It belongs to the MAX220–MAX249 family of line drivers and receivers designed for EIA/TIA-232E and V.28/V.24 communication interfaces when ±12 V supplies are unavailable. The device provides the voltage conversion needed to connect low-voltage digital logic to a balanced RS-232 transceiver.

An RS-232 transceiver is an interface IC that combines differential line-driver and receiver functions with logic-level conversion. The MAX232ACSE+ integrates two transmitters and two receivers, placing two RS-232 channels in one 16-pin surface-mount package. This integration is useful in equipment that requires bidirectional serial communication without external driver and receiver ICs.

The MAX232ACSE+ operates from a +5 V supply and is identified in the manufacturer literature as a multichannel RS-232 driver and receiver. Its two-driver, two-receiver arrangement supports point-to-point links, control interfaces, industrial equipment, and communications ports that conform to the stated EIA/TIA-232E and V.28/V.24 interface families. The 16-SOIC package supports compact surface-mount PCB construction.

The MAX220–MAX249 family uses on-chip charge-pump circuitry to generate the voltage levels required by RS-232 signals from a single positive supply. This topology lets the interface operate without a separate negative supply rail while preserving the positive and negative signal swings expected by RS-232 receivers. Exact charge-pump capacitor requirements and timing values should be taken from the manufacturer datasheet.

Typical applications include computer and embedded-system service ports, industrial control links, test equipment, data-acquisition systems, and RS-232 connections between modern CMOS logic and legacy peripherals. The two transmitters and two receivers also support designs that need both command and status paths across one interface IC.

PCB implementation should follow the manufacturer datasheet’s charge-pump capacitor and layout guidance. Keep the charge-pump connections compact, provide a stable ground return, and route RS-232 traces away from sensitive analog and high-speed digital nodes. Confirm the selected connector’s signal assignment and any required protection network before field deployment.

This page combines the manufacturer family information with package, sourcing, and replacement guidance. It also distinguishes the closest same-footprint options and explains when an electrical or thermal difference prevents a replacement from being treated as a true drop-in substitute.

Alternatif penggantian untuk MAX232ACSE+ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MAX232ACSE+ (sama faktor bentuk dan footprint) — berbeda di dalam Package, Data Rate, RoHS Status, Interface Standard, Product Type.

Analog Devices
Package: 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
Data Rate: 200 kbps
RoHS Status: Compliant
Bandingkan dengan MAX232ACSE+ →
Texas Instruments
Package: 16-pin SOIC
Data Rate: 120 kbit/s
Interface Standard: TIA/EIA-232-F and ITU Recommendation V.28
Bandingkan dengan MAX232ACSE+ →
Texas Instruments
Package: 16-pin SOIC (D)
Data Rate: 120 kbit/s
RoHS Status: Compliant
Bandingkan dengan MAX232ACSE+ →
Maxim Integrated
Interface Standard: EIA/TIA-232E
Product Type: Dual RS-232 line driver and receiver transceiver
Bandingkan dengan MAX232ACSE+ →
MaxLinear
Data Rate: 250 kbps under load
RoHS Status: RoHS details listed on product listings

MAX232ESE+

✅ Drop-In
Maxim Integrated
📦 16-SOIC
Dual RS-232 line driver and receiver transceiver · 2 channels · 2 channels · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E · CCITT V.28 · V.24

Kontak untuk harga

Lihat Datasheet →

MAX232ECDR

✅ Drop-In
Texas Instruments
📦 16-SOIC
Dual RS-232 Driver/Receiver · 2 · 2 · 120 kbit/s · 4.5 V to 5.5 V · 8 mA (typ) · ±30 V · ±5 V min, ±10 V typ (from charge pump)

Kontak untuk harga

Lihat Datasheet →

MAX232DW

✅ Drop-In
Texas Instruments
📦 16-SOIC
Dual RS-232 driver/receiver with capacitive voltage generator · 2 · 2 · 120 kbit/s · 5 V · 4.5 V to 5.5 V · Approximately ±9 V · ±30 V

Kontak untuk harga

Lihat Datasheet →

SP3232EBCN-L/TR

✅ Drop-In
MaxLinear
📦 16-SOIC
2/2 · Full duplex RS-232 transceiver · 3 V to 5.5 V · 250 kbps under load · 15 kV on RS-232 pins · True EIA/TIA-232-F · On-chip charge pump, single supply · 0.1 uF per pump node

✓ Ada di Gudang

$0.7711 / Satuan

Lihat Datasheet →

MAX232ACSE+ Spesifikasi

Product Type RS-232 line driver and receiver transceiver
Tegangan Pemuat +5 V
Number of Transmitters 2 transmitters
Number of Receivers 2 receivers
Interface Standard EIA/TIA-232E and V.28/V.24
Paket 16-pin SOIC, 3.9 mm nominal body width
Tipe Mounting Surface mount
Data Direction 2/2 transceiver configuration
Output Driver Type RS-232 line driver
Receiver Type RS-232 line receiver
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable
Lead-Free Status unknown
Halogen-Free Status unknown

MAX232ACSE+ 16-pin soic, 3.9 mm nominal body width Diamant Konfigurasi Panduan

Konfigurasi pin untuk MAX232ACSE+ (16-pin soic, 3.9 mm nominal body width pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 16-pin soic, 3.9 mm nominal body width untuk MAX232ACSE+

Tidak ada data diatribut pin yang tersedia untuk MAX232ACSE+.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MAX232ACSE+ cocok untuk 6 aplikasis: Embedded UART Service Port, Industrial Control Communication, Data Acquisition Equipment, Test and Measurement Instrument, RS-232 Security and Access Console, Legacy Peripheral Connectivity.

🔧

Embedded UART Service Port

The MAX232ACSE+ fits an embedded-system service port where a UART operates at CMOS logic levels but the external equipment expects an RS-232 connection. Its +5 V supply requirement avoids a separate ±12 V rail, while two transmitters and two receivers provide two communication paths in one 16-SOIC device. One channel can carry commands while another reports status or receives data. Follow the manufacturer datasheet for charge-pump capacitor values and logic-side pin assignments. The circuit is particularly useful in industrial controllers, programmable instruments, and service processors that need legacy RS-232 connectivity without adding separate driver and receiver packages.

🏭

Industrial Control Communication

The MAX232ACSE+ can bridge industrial controller logic and an RS-232 equipment port when the system supplies only +5 V. Its two transmitters and two receivers support separate command, response, status, and alarm paths while consolidating the interface into a 16-pin SOIC footprint. The MAX220–MAX249 family supports EIA/TIA-232E and V.28/V.24 communications interfaces according to the manufacturer datasheet. In a control cabinet, maintain a low-impedance ground between the equipment when required by the interface standard, keep charge-pump traces compact, and add the connector protection specified by the final installation environment.

📊

Data Acquisition Equipment

The MAX232ACSE+ is suitable for data-acquisition instruments that exchange commands or measurements over RS-232. A +5 V-powered 2/2 transceiver supports two RS-232 channels without requiring separate line-driver and receiver packages, reducing board area in compact instrumentation. The receiver path can accept signals from the remote data source, while the driver path provides the corresponding response or configuration command. Designers should use the manufacturer pin table to distinguish logic inputs from receiver outputs, preserve adequate grounding over long cable runs, and follow the datasheet’s charge-pump capacitor layout to avoid degrading the generated RS-232 levels.

🖥️

Test and Measurement Instrument

The MAX232ACSE+ fits bench instruments and automated test systems that use a computer RS-232 connection for commands, results, and status. The +5 V supply and integrated 2/2 arrangement simplify the interface section while preserving a standard 16-SOIC footprint for automated-board assembly. Two independent driver and receiver channels can support a primary command link and a secondary diagnostic link. Verify the required cable signaling, grounding, and connector pinout for each instrument pair. Use the manufacturer application guidance for capacitor selection and placement, and keep the RS-232 connector side of the board separated from sensitive measurement circuitry to reduce coupling.

🔐

RS-232 Security and Access Console

The MAX232ACSE+ can provide console connectivity in access-control or security equipment where a system-on-chip exposes UART signals and the external service connector uses RS-232. The +5 V-powered device integrates 2 transmitters and 2 receivers into one 16-SOIC package, allowing command and diagnostic channels to share the interface section. The use of a dedicated transceiver keeps the RS-232 voltage conversion away from the main logic rails and supports the stated EIA/TIA-232E and V.28/V.24 interface families. For exposed installations, evaluate connector-level surge and ESD protection separately, because the device’s own protection rating must be confirmed from the manufacturer datasheet.

🔌

Legacy Peripheral Connectivity

The MAX232ACSE+ is useful when a modern controller must communicate with a legacy printer, adapter, or service peripheral through RS-232. Its two transmitters and two receivers permit bidirectional communication and provide spare channels for handshake or status signals. Because the device operates from +5 V and generates the required signal levels internally, the system does not need a separate negative supply rail. Verify the peripheral’s logic polarity, signal direction, connector pin assignment, and maximum data rate against the datasheets for both devices. The MAX232ACSE+ package also allows a straightforward comparison with the same-family MAX232 alternatives when qualification or temperature-grade requirements differ.

What is the MAX232ACSE+?
The MAX232ACSE+ is a +5 V-powered RS-232 interface transceiver containing 2 transmitters and 2 receivers in a 16-pin SOIC package. According to the manufacturer datasheet, the MAX220–MAX249 family targets EIA/TIA-232E and V.28/V.24 communications interfaces, particularly where ±12 V is not available. It is therefore suited to connecting CMOS-level UART hardware to an RS-232 port.
What are the key specifications of MAX232ACSE+ that engineers should know?
The MAX232ACSE+ combines 2 RS-232 transmitters, 2 receivers, a +5 V supply requirement, and a 16-pin SOIC package in one interface IC. According to the manufacturer datasheet, the device supports EIA/TIA-232E and V.28/V.24 communications interfaces. Its two-transmitter, two-receiver arrangement allows two RS-232 channels to be implemented within a single compact surface-mount package.
Does MAX232ACSE+ require a negative power supply?
No. The MAX232ACSE+ operates from a +5 V supply and does not require an external ±12 V rail for ordinary RS-232 operation. According to the manufacturer datasheet, the MAX220–MAX249 family is intended specifically for interfaces where ±12 V is unavailable. Follow the datasheet charge-pump capacitor and layout instructions to obtain the required RS-232 signal levels.
Where can I download the MAX232ACSE+ datasheet PDF?
The MAX232ACSE+ datasheet is available through the Analog Devices MAX232 product page, with a separate MAX232ACSE+ PDF also listed by the datasheet archive. According to the manufacturer datasheet, this +5 V-powered multichannel device contains RS-232 drivers and receivers for EIA/TIA-232E and V.28/V.24 interfaces. Use the manufacturer document as the authority for pin assignments, charge-pump capacitors, timing, and absolute maximum ratings.
Where can I find the MAX232ACSE+ pinout?
Use the pin-description table and package drawing in the MAX232ACSE+ manufacturer datasheet to assign the 16 SOIC pins. The verified product information confirms a 16-SOIC package but does not reproduce the individual pin names. Confirm the numbered pinout against the datasheet before routing the PCB, especially the charge-pump capacitor, supply, ground, driver-output, and receiver-input connections.
What can replace the MAX232ACSE+?
MAX232ESE, MAX232ECDR, and MAX232DW are same-manufacturer alternatives identified in the cross-reference results, while SP3232EBCN-L is listed as a pin-compatible functional equivalent by MaxLinear. A valid replacement must retain the 16-SOIC footprint, 2/2 transceiver arrangement, +5 V operation, and required EIA/TIA-232E behavior. Review temperature grade, data rate, ESD rating, and lifecycle status before treating any candidate as a drop-in replacement.
Is MAX232ACSE+ the same as MAX232ESE?
The MAX232ACSE+ and MAX232ESE share the +5 V-powered, 2/2 RS-232 transceiver concept and the same 16-SOIC footprint, but ordering options can differ in temperature grade and qualification. The cross-reference results explicitly compare the two parts. According to the manufacturer ordering information for the MAX232 family, verify the exact temperature range, package marking, and lifecycle status before replacing MAX232ACSE+ with MAX232ESE.
MAX232ACSE+ vs MAX232DW - which is better for an industrial control port?
Choose the MAX232ACSE+ when its qualified ordering temperature range matches the intended environment; otherwise MAX232DW may be appropriate if its ordering grade satisfies the same requirement. Both are identified as 2/2, +5 V RS-232 transceivers in 16-pin SOIC packages, so the footprint is suitable for direct comparison. The decisive factors are temperature grade, lifecycle, qualification, and any production-control differences documented in the ordering tables.
When should I choose MAX232ACSE+ over MAX232ECDR?
Choose MAX232ACSE+ when it is the exact ordering option supported for the required temperature grade, qualification level, and production program. The cross-reference results identify MAX232ECDR as having essentially the same electrical profile for most designs, but functionally similar performance does not by itself establish every commercial and qualification condition. Compare the ordering tables, package markings, lifecycle status, and ESD or data-rate limits before finalizing the substitution.
Is MAX232ACSE+ suitable for a UART-to-RS-232 interface?
Yes. The MAX232ACSE+ is suitable for a UART-to-RS-232 interface because it provides 2 transmitters, 2 receivers, and +5 V operation in a 16-pin SOIC package. According to the manufacturer datasheet, it supports EIA/TIA-232E and V.28/V.24 interfaces. The UART logic connects to the driver and receiver logic pins, while the external connector uses the RS-232 driver outputs and receiver inputs.
What is the best MaxLinear equivalent for MAX232ACSE+?
SP3232EBCN-L is the best cross-brand candidate identified in the MaxLinear cross-reference data because that source identifies SP3232EB as a pin-compatible functional equivalent to MAX232ACSE. The part is also associated with a 250 kbaud rate and 15 kV ESD protection. Confirm its 16-SOIC footprint, supply voltage, channel count, temperature grade, and lifecycle status against the MAX232ACSE+ datasheet before using it as a drop-in replacement.
Where can I buy MAX232ACSE+ online?
Use the Request a Quote form on this page to request current MAX232ACSE+ availability, unit pricing, minimum order quantity, and lead time. The verified listing identifies the exact MAX232ACSE+ as a 2/2 full RS-232 transceiver in a 16-SOIC package. Quote requests are preferable to static marketplace prices because component inventory and commercial terms can change without notice.
What is the price of MAX232ACSE+?
Current MAX232ACSE+ pricing should be requested through the Request a Quote form on this page. The part is a +5 V-powered, 2/2 RS-232 transceiver in a 16-SOIC package, and its commercial terms may vary with quantity, packaging, and inventory. The form provides the appropriate channel for a current quote without presenting a stale or non-contractual price figure.
What is the lead time for MAX232ACSE+?
Request the current lead time through the Request a Quote form on this page. The MAX232ACSE+ is actively presented as a 2/2 full RS-232 transceiver in a 16-SOIC package, but availability can change by package, quantity, and manufacturing schedule. Include the required quantity, target ship date, and destination country with the inquiry so the supplier can confirm a current commitment.
Is MAX232ACSE+ in stock?
Confirm current MAX232ACSE+ stock using the Request a Quote form on this page. The verified listing shows the exact device as a +5 V-powered, 2/2 RS-232 transceiver in a 16-SOIC package, but a listing alone is not a guaranteed inventory commitment. State the required quantity and desired delivery schedule so the response reflects current supply rather than a historical stock indication.
How should MAX232ACSE+ charge-pump capacitors be placed?
Place the charge-pump capacitors exactly as shown in the MAX232ACSE+ manufacturer application guidance and keep their connections short. The device generates RS-232 signal levels from a +5 V supply, so capacitor values, polarity, dielectric requirements, and placement directly affect interface performance. Also maintain a low-impedance ground path and route the external RS-232 connector side away from sensitive logic to reduce noise pickup.

Data referensi engineering untuk MAX232ACSE+ — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose MAX232ACSE+ when it is the ordering option supported by your production, qualification, temperature, and availability requirements. Its +5 V supply, two transmitters, two receivers, and 16-SOIC footprint make it suitable for general-purpose RS-232 links in industrial, embedded, test, and legacy-peripheral equipment. MAX232ESE is a practical same-family choice when its ordering grade fits the design, while MAX232ECDR and MAX232DW can support footprint-reuse designs after their temperature, lifecycle, and qualification details are checked. SP3232EBCN-L is the leading cross-brand option because the MaxLinear cross-reference identifies it as pin compatible; its published 250 kbaud rate and 15 kV ESD rating add useful differentiation. For any substitution, verify the numbered pin map, charge-pump connections, supply voltage, data rate, operating temperature, and connector-side signal assignments before production release.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MAX232ESE MAX232ECDR MAX232DW SP3232EBCN-L
Brand Analog Devices Analog Devices Analog Devices Analog Devices MaxLinear
Package 16-SOIC 16-SOIC - same footprint 16-SOIC - same footprint 16-SOIC - same footprint 16-SOIC - pin-compatible
Transceiver Configuration 2 transmitters / 2 receivers 2 transmitters / 2 receivers 2 transmitters / 2 receivers 2 transmitters / 2 receivers 2 transmitters / 2 receivers
Supply Voltage +5 V +5 V +5 V +5 V +5 V
Interface Standard EIA/TIA-232E and V.28/V.24 RS-232 RS-232 RS-232 RS-232
Negative Supply Required No No No No No

Diferensiator Kunci

  • Exact original ordering option with the full 2/2 RS-232 channel arrangement (vsMAX232ECDR)
  • Manufacturer-supported family option in the same 16-SOIC footprint (vsMAX232DW)
  • Direct +5 V RS-232 interface without an external negative supply (vsSP3232EBCN-L)

Catatan Desain

Follow the MAX232ACSE+ manufacturer application drawing for charge-pump capacitor placement, including the specified capacitor values, polarity where applicable, and the shortest practical connection paths. Place the capacitors close to their associated IC pins and keep the generated charge-pump nodes away from sensitive analog inputs. Confirm the exact footprint, including lead geometry and pin numbering, against the 16-SOIC package drawing before releasing the PCB files.

Do not assume that any same-family MAX232 ordering code is electrically identical for every installation. Compare the manufacturer ordering table for temperature range, package code, qualification, data rate, and lifecycle status. For a replacement, verify that the UART logic pins map to the same numbered SOIC positions and that the external RS-232 connector uses the same driver-output and receiver-input assignments. A footprint match alone does not validate timing or environmental requirements.

Provide a low-impedance ground reference between the MAX232ACSE+ and the connected RS-232 equipment when the interface requires shared ground. Route the connector-side signals away from sensitive analog and high-speed digital traces, and keep external protection components close to the connector. The +5 V supply connection should be decoupled according to the manufacturer guidance, with the charge-pump network positioned to minimize loop area and unwanted coupling into nearby circuitry.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The verified product information does not provide compliance declarations for RoHS, REACH, lead-free status, halogen-free status, or conflict minerals. AEC-Q100 is not applicable to this general-purpose RS-232 interface IC based on the available product information.

Pencarian Terkait

MAX232ACSE+ datasheet MAX232ACSE+ pinout MAX232ACSE+ datasheet pdf MAX232ACSE+ equivalent MAX232ACSE+ replacement MAX232ACSE+ cross reference MAX232ACSE+ vs MAX232ESE MAX232ACSE+ price MAX232ACSE+ stock Analog Devices MAX232ACSE+ MAX232ACSE+ 16 SOIC MAX232ACSE+ RS-232 application circuit

Komponen dan Istilah Terkait

Analog Devices MAX232ACSE+ MAX232 MAX220–MAX249 RS-232 transceiver line driver line receiver interface IC EIA/TIA-232E V.28 V.24 CMOS UART 16-SOIC SOIC package family surface mount charge-pump voltage converter +5 V power supply 2 transmitters 2 receivers industrial communication data acquisition test and measurement legacy peripheral ESD protection
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ