MAX232ACSE+ - +5V RS-232 Transceiver | Analog Devices
MPN: MAX232ACSE+ ✓ AktifMAX232ACSE+ Genel Bakış
An RS-232 transceiver is an interface IC that combines differential line-driver and receiver functions with logic-level conversion. The MAX232ACSE+ integrates two transmitters and two receivers, placing two RS-232 channels in one 16-pin surface-mount package. This integration is useful in equipment that requires bidirectional serial communication without external driver and receiver ICs.
The MAX232ACSE+ operates from a +5 V supply and is identified in the manufacturer literature as a multichannel RS-232 driver and receiver. Its two-driver, two-receiver arrangement supports point-to-point links, control interfaces, industrial equipment, and communications ports that conform to the stated EIA/TIA-232E and V.28/V.24 interface families. The 16-SOIC package supports compact surface-mount PCB construction.
The MAX220–MAX249 family uses on-chip charge-pump circuitry to generate the voltage levels required by RS-232 signals from a single positive supply. This topology lets the interface operate without a separate negative supply rail while preserving the positive and negative signal swings expected by RS-232 receivers. Exact charge-pump capacitor requirements and timing values should be taken from the manufacturer datasheet.
Typical applications include computer and embedded-system service ports, industrial control links, test equipment, data-acquisition systems, and RS-232 connections between modern CMOS logic and legacy peripherals. The two transmitters and two receivers also support designs that need both command and status paths across one interface IC.
PCB implementation should follow the manufacturer datasheet’s charge-pump capacitor and layout guidance. Keep the charge-pump connections compact, provide a stable ground return, and route RS-232 traces away from sensitive analog and high-speed digital nodes. Confirm the selected connector’s signal assignment and any required protection network before field deployment.
This page combines the manufacturer family information with package, sourcing, and replacement guidance. It also distinguishes the closest same-footprint options and explains when an electrical or thermal difference prevents a replacement from being treated as a true drop-in substitute.
Drop-in alternatifler için MAX232ACSE+ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MAX232ACSE+ (aynı form faktörü ve ayağa oturma) — farklı olan Package, Data Rate, RoHS Status, Interface Standard, Product Type.
MAX232ESE+
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MAX232ECDR
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MAX232DW
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →SP3232EBCN-L/TR
✅ Yerleştirme✓ Stokta
$0.7711 / Birim
Veri Şablonunu Görüntüle →MAX232ACSE+ Özellikler
| Product Type | RS-232 line driver and receiver transceiver |
| Besleme Gerilimi | +5 V |
| Number of Transmitters | 2 transmitters |
| Number of Receivers | 2 receivers |
| Interface Standard | EIA/TIA-232E and V.28/V.24 |
| Paket | 16-pin SOIC, 3.9 mm nominal body width |
| Montaj Türü | Surface mount |
| Data Direction | 2/2 transceiver configuration |
| Output Driver Type | RS-232 line driver |
| Receiver Type | RS-232 line receiver |
| RoHS Durumu | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
MAX232ACSE+ 16-pin soic, 3.9 mm nominal body width Pin Yapısı Kılavuzu
MAX232ACSE+ (16-pin soic, 3.9 mm nominal body width paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: MAX232ACSE+.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MAX232ACSE+ için uygundur 6 uygulamas: Embedded UART Service Port, Industrial Control Communication, Data Acquisition Equipment, Test and Measurement Instrument, RS-232 Security and Access Console, Legacy Peripheral Connectivity.
Embedded UART Service Port
The MAX232ACSE+ fits an embedded-system service port where a UART operates at CMOS logic levels but the external equipment expects an RS-232 connection. Its +5 V supply requirement avoids a separate ±12 V rail, while two transmitters and two receivers provide two communication paths in one 16-SOIC device. One channel can carry commands while another reports status or receives data. Follow the manufacturer datasheet for charge-pump capacitor values and logic-side pin assignments. The circuit is particularly useful in industrial controllers, programmable instruments, and service processors that need legacy RS-232 connectivity without adding separate driver and receiver packages.
Önerilen
Industrial Control Communication
The MAX232ACSE+ can bridge industrial controller logic and an RS-232 equipment port when the system supplies only +5 V. Its two transmitters and two receivers support separate command, response, status, and alarm paths while consolidating the interface into a 16-pin SOIC footprint. The MAX220–MAX249 family supports EIA/TIA-232E and V.28/V.24 communications interfaces according to the manufacturer datasheet. In a control cabinet, maintain a low-impedance ground between the equipment when required by the interface standard, keep charge-pump traces compact, and add the connector protection specified by the final installation environment.
Önerilen
Data Acquisition Equipment
The MAX232ACSE+ is suitable for data-acquisition instruments that exchange commands or measurements over RS-232. A +5 V-powered 2/2 transceiver supports two RS-232 channels without requiring separate line-driver and receiver packages, reducing board area in compact instrumentation. The receiver path can accept signals from the remote data source, while the driver path provides the corresponding response or configuration command. Designers should use the manufacturer pin table to distinguish logic inputs from receiver outputs, preserve adequate grounding over long cable runs, and follow the datasheet’s charge-pump capacitor layout to avoid degrading the generated RS-232 levels.
Önerilen
Test and Measurement Instrument
The MAX232ACSE+ fits bench instruments and automated test systems that use a computer RS-232 connection for commands, results, and status. The +5 V supply and integrated 2/2 arrangement simplify the interface section while preserving a standard 16-SOIC footprint for automated-board assembly. Two independent driver and receiver channels can support a primary command link and a secondary diagnostic link. Verify the required cable signaling, grounding, and connector pinout for each instrument pair. Use the manufacturer application guidance for capacitor selection and placement, and keep the RS-232 connector side of the board separated from sensitive measurement circuitry to reduce coupling.
Önerilen
RS-232 Security and Access Console
The MAX232ACSE+ can provide console connectivity in access-control or security equipment where a system-on-chip exposes UART signals and the external service connector uses RS-232. The +5 V-powered device integrates 2 transmitters and 2 receivers into one 16-SOIC package, allowing command and diagnostic channels to share the interface section. The use of a dedicated transceiver keeps the RS-232 voltage conversion away from the main logic rails and supports the stated EIA/TIA-232E and V.28/V.24 interface families. For exposed installations, evaluate connector-level surge and ESD protection separately, because the device’s own protection rating must be confirmed from the manufacturer datasheet.
Önerilen
Legacy Peripheral Connectivity
The MAX232ACSE+ is useful when a modern controller must communicate with a legacy printer, adapter, or service peripheral through RS-232. Its two transmitters and two receivers permit bidirectional communication and provide spare channels for handshake or status signals. Because the device operates from +5 V and generates the required signal levels internally, the system does not need a separate negative supply rail. Verify the peripheral’s logic polarity, signal direction, connector pin assignment, and maximum data rate against the datasheets for both devices. The MAX232ACSE+ package also allows a straightforward comparison with the same-family MAX232 alternatives when qualification or temperature-grade requirements differ.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MAX232ACSE+ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MAX232ESE | MAX232ECDR | MAX232DW | SP3232EBCN-L |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | MaxLinear |
| Package | 16-SOIC | 16-SOIC - same footprint | 16-SOIC - same footprint | 16-SOIC - same footprint | 16-SOIC - pin-compatible |
| Transceiver Configuration | 2 transmitters / 2 receivers | 2 transmitters / 2 receivers | 2 transmitters / 2 receivers | 2 transmitters / 2 receivers | 2 transmitters / 2 receivers |
| Supply Voltage | +5 V | +5 V | +5 V | +5 V | +5 V |
| Interface Standard | EIA/TIA-232E and V.28/V.24 | RS-232 | RS-232 | RS-232 | RS-232 |
| Negative Supply Required | No | No | No | No | No |
Ana Farklılayıcılar
- Exact original ordering option with the full 2/2 RS-232 channel arrangement (karşılaştırma:MAX232ECDR)
- Manufacturer-supported family option in the same 16-SOIC footprint (karşılaştırma:MAX232DW)
- Direct +5 V RS-232 interface without an external negative supply (karşılaştırma:SP3232EBCN-L)
Tasarım Notları
Follow the MAX232ACSE+ manufacturer application drawing for charge-pump capacitor placement, including the specified capacitor values, polarity where applicable, and the shortest practical connection paths. Place the capacitors close to their associated IC pins and keep the generated charge-pump nodes away from sensitive analog inputs. Confirm the exact footprint, including lead geometry and pin numbering, against the 16-SOIC package drawing before releasing the PCB files.
Do not assume that any same-family MAX232 ordering code is electrically identical for every installation. Compare the manufacturer ordering table for temperature range, package code, qualification, data rate, and lifecycle status. For a replacement, verify that the UART logic pins map to the same numbered SOIC positions and that the external RS-232 connector uses the same driver-output and receiver-input assignments. A footprint match alone does not validate timing or environmental requirements.
Provide a low-impedance ground reference between the MAX232ACSE+ and the connected RS-232 equipment when the interface requires shared ground. Route the connector-side signals away from sensitive analog and high-speed digital traces, and keep external protection components close to the connector. The +5 V supply connection should be decoupled according to the manufacturer guidance, with the charge-pump network positioned to minimize loop area and unwanted coupling into nearby circuitry.
Uyumluluk Bilgisi
The verified product information does not provide compliance declarations for RoHS, REACH, lead-free status, halogen-free status, or conflict minerals. AEC-Q100 is not applicable to this general-purpose RS-232 interface IC based on the available product information.