Analog Devices

MAX3221EEAE-T - 250kbps RS-232 Transceiver | Analog Devices

MPN: MAX3221EEAE-T ✓ Aktif
3.0V to 5.5V Vdss 1µA Id 16-pin SSOP Package
MOQ: 1 |

MAX3221EEAE-T Ringkasan

Analog Devices MAX3221EEAE-T is a 3.0V to 5.5V powered RS-232 transceiver with one driver, one receiver, automatic shutdown and wakeup, and ±15kV ESD protection in a 16-pin SSOP package. It supports data rates up to 250kbps and is packaged for tape-and-reel production handling.

An RS-232 transceiver is an interface IC that converts logic-level serial signals between a host or controller and the voltage-defined RS-232 bus. The MAX3221EEAE-T belongs to the RS-232 interface hierarchy, where a transceiver combines a transmitter for outbound data with a receiver for inbound data. Its single-driver, single-receiver arrangement is intended for point-to-point serial links and portable equipment requiring compact implementation.

The MAX3221EEAE-T operates from 3.0V to 5.5V, supports signaling rates through 250kbps, and provides ±15kV ESD protection. AutoShutdown reduces supply current to 1µA when no valid receiver signal is detected, while automatic wakeup reactivates the interface when valid data returns. These characteristics make the device useful where serial connectivity must coexist with strict power-consumption limits.

Internally, the device combines its RS-232 driver and receiver functions with on-board charge-pump support, enabling operation from a single 3.0V to 5.5V supply rather than a bipolar ±5V source. The enhanced ESD protection is intended to improve tolerance to electrostatic discharge encountered during cable connection, removal, and industrial or commercial handling.

Typical uses include industrial serial adapters, data-acquisition equipment, POS terminals, barcode scanners, test instruments, and embedded systems that exchange data with RS-232 peripherals. The 250kbps capability suits moderate-speed command and control links, while the low-power shutdown behavior benefits portable or intermittently connected systems.

PCB design should account for the 16-pin SSOP footprint, place the charge-pump capacitors as close as practical to their designated pins, and keep the RS-232 driver outputs and receiver inputs away from sensitive high-speed traces. Confirm the capacitor values, supply bypassing, and charge-pump layout against the manufacturer datasheet before releasing the PCB.

This product page combines the manufacturer family specifications, exact ordering information, structured alternatives, package details, and practical interface-design guidance to support component selection and board-layout planning.

Alternatif penggantian untuk MAX3221EEAE-T — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MAX3221EEAE-T (sama faktor bentuk dan footprint) — berbeda di dalam Supply Voltage Range, AutoShutdown Supply Current, Interface Standard, Package, Product Type.

Analog Devices
Supply Voltage Range: +3 V to +5.5 V
AutoShutdown Supply Current: 1 µA
Interface Standard: RS-232
Bandingkan dengan MAX3221EEAE-T →
Analog Devices
AutoShutdown Supply Current: approximately 1µA
Interface Standard: EIA/TIA-232
Bandingkan dengan MAX3221EEAE-T →
Texas Instruments
Supply Voltage Range: 3V to 5.5V
Interface Standard: TIA/EIA-232-F
Package: 16-SSOP (0.209 inch, 5.30mm width)
Bandingkan dengan MAX3221EEAE-T →

MAX3221ECAE+T

✅ Drop-In
Analog Devices
📦 16-pin SSOP
RS-232 transceiver · 1 transmitter, 1 receiver · 3.0V to 5.5V · 250kbps · ±15kV · approximately 1µA · EIA/TIA-232 · V.28 and V.24

Kontak untuk harga

Lihat Datasheet →

MAX3221EIDB

✅ Drop-In
Texas Instruments
📦 16-pin SSOP
RS-232 line driver and receiver transceiver · 1 · 1 · 250kbps · 3V to 5.5V · TIA/EIA-232-F · IEC 61000-4-2 · ±15kV

Kontak untuk harga

Lihat Datasheet →

MAX3221CAE+

✅ Drop-In
Analog Devices
📦 16-pin SSOP
RS-232 transceiver · 1 transmitter and 1 receiver · +3 V to +5.5 V · 1 µA · 16-pin SSOP · Surface mount · 1 driver · 1 receiver

Kontak untuk harga

Lihat Datasheet →

ICL3221EIAZ-T

✅ Drop-In
📦 16-pin SSOP
Cross-brand SSOP-16 RS-232 alternative with a 250kbps-class interface; shutdown, ESD, and temperature details require verification

📋 Alternatif referensi (tidak dalam katalog)

MAX3221EEUE+

✅ Drop-In
📦 16-pin SSOP
Same MAX3221E 250kbps RS-232 functionality and 16-pin SSOP pin count; physical width and lead geometry must match the target footprint

📋 Alternatif referensi (tidak dalam katalog)

MAX3221EEAE-T Spesifikasi

Product Type RS-232 transceiver
Driver Count 1 driver
Receiver Count 1 receiver
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 250kbps
AutoShutdown Supply Current 1µA
ESD Protection ±15kV
Communication Standard EIA/TIA-232
Signal Compatibility V.28 and V.24
Power Features Automatic shutdown and wakeup
Paket 16-pin SSOP
Tipe Mounting Surface mount
Packaging Tape & reel
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

MAX3221EEAE-T 16-pin ssop Diamant Konfigurasi Panduan

Konfigurasi pin untuk MAX3221EEAE-T (16-pin ssop pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 16-pin ssop untuk MAX3221EEAE-T

Tidak ada data diatribut pin yang tersedia untuk MAX3221EEAE-T.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MAX3221EEAE-T cocok untuk 6 aplikasis: Industrial Data-Acquisition Equipment, POS Terminal and Retail Peripherals, Portable Test and Measurement Instruments, Embedded Serial Adapter, Barcode Scanner and Label Printer Interfaces, Serial Communication in Service Equipment.

🏭

Industrial Data-Acquisition Equipment

The MAX3221EEAE-T fits instrument control and data-transfer ports that require one RS-232 transmitter and one receiver. Its 3.0V to 5.5V supply range allows operation from common 3.3V or 5V logic rails, while 250kbps supports moderate-speed command and measurement traffic. The ±15kV ESD rating adds useful protection for an exposed cable-connected port. AutoShutdown lowers supply current to 1µA when the remote device is inactive, which is advantageous in unattended test systems. Place the charge-pump capacitors and input/output protection components according to the manufacturer layout guidance.

📺

POS Terminal and Retail Peripherals

A MAX3221EEAE-T provides a compact power-saving link between a retail controller and a scanner, printer, or customer-facing terminal. The single-driver, single-receiver configuration is suitable for one full-duplex RS-232 port, and the 250kbps rate is more than adequate for typical command traffic. Operation from 3.0V to 5.5V simplifies interfacing with embedded logic. AutoShutdown can suppress the 1µA supply current during idle intervals, while ±15kV ESD protection improves robustness when the equipment is repeatedly connected and disconnected by operators.

🔧

Portable Test and Measurement Instruments

The MAX3221EEAE-T is well suited to handheld or battery-powered test instruments that communicate with a host computer over RS-232. Its 1µA AutoShutdown current reduces the load when the link is idle, and the 250kbps signaling rate accommodates instrument commands and moderate data transfers. The 3.0V to 5.5V operating range supports mixed-voltage portable designs. The 16-pin SSOP package limits board area, although designers should preserve the recommended charge-pump capacitor placement and provide appropriate protection at the external connector.

🧩

Embedded Serial Adapter

The MAX3221EEAE-T can bridge a 3.3V or 5V embedded controller to an RS-232 device without a bipolar transceiver supply. Its one-driver, one-receiver organization matches a single point-to-point port, while 250kbps supports configuration and control protocols. Automatic shutdown and wakeup reduce the need for firmware to manage power explicitly, with the specified shutdown supply current reaching 1µA. Designers should verify logic thresholds, RS-232 output levels, and the complete pin assignment in the manufacturer datasheet before creating a production adapter PCB.

🏬

Barcode Scanner and Label Printer Interfaces

A MAX3221EEAE-T provides a compact interface between an embedded controller and a barcode scanner, magnetic-stripe reader, or label printer using RS-232. The 250kbps rate supports rapid short command sequences and typical scanner transactions without imposing excessive timing margins. Automatic power reduction is useful in equipment that spends substantial time idle, and the device wakes when valid receiver activity is detected. The ±15kV ESD protection rating is especially relevant to peripheral cables that may be serviced by operators. Keep the RS-232 traces away from sensitive clock and analog routing.

🖥️

Serial Communication in Service Equipment

The MAX3221EEAE-T supports diagnostic and configuration links in service equipment that communicates with legacy RS-232 systems. Its 3.0V to 5.5V operation permits use with modern digital rails, and its 250kbps maximum data rate is suitable for command-oriented protocols. The 16-pin SSOP package reduces board space, while the 1µA AutoShutdown state lowers standby demand. For field-installed equipment, route the external connector through suitable protection and verify the grounding strategy so that cable transients do not couple directly into sensitive logic or power circuitry.

What are the key specifications of MAX3221EEAE-T that engineers should know?
The MAX3221EEAE-T is a single-driver, single-receiver RS-232 transceiver operating from 3.0V to 5.5V at rates up to 250kbps. It provides ±15kV ESD protection and an AutoShutdown supply current of 1µA in a 16-pin SSOP package. Analog Devices describes the MAX3221 family as an EIA/TIA-232 and V.28/V.24 communications interface with automatic shutdown, wakeup, and enhanced electrostatic-discharge protection.
What is the operating voltage of MAX3221EEAE-T?
The MAX3221EEAE-T operates from 3.0V to 5.5V. According to the Analog Devices MAX3221 product information, the MAX3221 family is designed for 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces. This single-supply range allows the device to operate from common 3.3V and 5V system rails without requiring a separate bipolar RS-232 supply.
What is the maximum data rate of MAX3221EEAE-T?
The MAX3221EEAE-T supports data rates up to 250kbps. The Analog Devices MAX3221 family description identifies high-data-rate operation as a core feature of the device. This rate is appropriate for RS-232 command links, configuration interfaces, data-acquisition systems, and point-to-point connections that do not require higher-throughput differential standards such as RS-485.
Where to download the MAX3221EEAE-T datasheet PDF?
The authoritative MAX3221 documentation is available through the Analog Devices MAX3221 product page at https://www.analog.com/en/products/max3221.html. The page provides the family datasheet and product information for MAX3221, MAX3223, and MAX3243 interfaces. Use the MAX3221EEAE data sheet for pin functions, recommended charge-pump capacitors, operating limits, and RS-232 output levels.
Where can I find the MAX3221EEAE-T pinout?
The MAX3221EEAE-T pinout is defined in the manufacturer pin-description table for the 16-pin SSOP package. Use that table when assigning the supply, ground, receiver, driver, and charge-pump connections because the visible ordering information alone does not provide a complete pin-number map. The -T suffix identifies tape-and-reel ordering and does not change the electrical pinout.
What does AutoShutdown do in the MAX3221EEAE-T?
AutoShutdown disables the MAX3221EEAE-T when its receiver does not detect a valid signal level, reducing supply current to 1µA. Analog Devices states that the on-board power supply and drivers shut down under this condition. When a valid signal returns, automatic wakeup reactivates the interface, reducing standby consumption without requiring an external control signal.
Is the MAX3221EEAE-T suitable for industrial RS-232 equipment?
The MAX3221EEAE-T is suitable for industrial equipment requiring a compact, low-power RS-232 link with protection for electrostatic discharge. Its specified 3.0V to 5.5V supply range, 250kbps data rate, and ±15kV ESD protection suit controller boards, data-acquisition units, and service equipment. The operating-temperature limit and other environmental requirements must be checked against the manufacturer datasheet before deployment.
MAX3221EEAE-T vs MAX3221ECAE+T - which is better for a compact RS-232 design?
The MAX3221EEAE-T and MAX3221ECAE+T are closely related 16-pin SSOP MAX3221E transceivers, and cross-reference information identifies them as package-compatible alternatives. Both are 3.0V to 5.5V RS-232 devices supporting 250kbps operation. The final selection should account for ordering temperature grade, qualification, and any device-specific electrical differences shown in the corresponding manufacturer data sheets.
What is the difference between MAX3221EEAE-T and MAX3221EIDB?
The MAX3221EEAE-T and MAX3221EIDB are described as SSOP-16 devices with consistent terminals, package characteristics, and functional performance, making the MAX3221EIDB a direct replacement candidate. Both belong to the 3.0V-powered MAX3221E family with automatic shutdown and enhanced ESD protection. Review suffix-specific temperature, qualification, and lifecycle requirements before production use.
When should I choose MAX3221EEAE-T instead of a cross-brand RS-232 transceiver?
Choose the MAX3221EEAE-T when you want a known 16-pin SSOP implementation with one driver, one receiver, 3.0V to 5.5V operation, 250kbps signaling, ±15kV ESD protection, and 1µA AutoShutdown current. A cross-brand alternative is reasonable when its documentation explicitly confirms the same SSOP-16 footprint, pin functions, supply range, logic levels, and driver electrical limits.
What can replace MAX3221EEAE-T?
A drop-in replacement for the MAX3221EEAE-T must use the same 16-pin SSOP footprint and preserve the receiver, driver, supply, and charge-pump pin functions. Cross-reference information identifies MAX3221ECAE+T and MAX3221EIDB as package-compatible candidates, while Renesas ICL3221EIAZ-T provides another same-package comparison candidate. Confirm operating limits, temperature grade, and shutdown behavior against the manufacturer documentation.
Can MAX3221ECAE+T replace MAX3221EEAE-T?
The MAX3221ECAE+T can be considered a drop-in candidate for the MAX3221EEAE-T because both use the 16-pin SSOP package and the same 250kbps RS-232 transceiver family. Cross-reference information specifically compares their RS-232, mounting, package, and functional characteristics. Production substitution should still be approved against the exact ordering code, temperature range, qualification status, and electrical limits.
What is the best Renesas equivalent for MAX3221EEAE-T?
The Renesas ICL3221EIAZ-T is the most relevant cross-brand candidate identified for the MAX3221EEAE-T because it is compared against the same MAX3221EEAE ordering family and uses a 16-pin SSOP form factor. Treat it as a qualified drop-in candidate only after checking pin functions, operating voltage, data rate, ESD rating, shutdown timing, and temperature grade in both manufacturers' data sheets.
Where to buy MAX3221EEAE-T online?
Use the Request a Quote form on this XAIPART product page to request MAX3221EEAE-T pricing, stock confirmation, lot availability, and lead time. The -T suffix identifies the tape-and-reel ordering option in the 16-pin SSOP package. A quotation can also confirm the exact package, production quantity, and delivery requirements without relying on changing public listing values.
What is the price and lead time for MAX3221EEAE-T?
Current price and lead time for the MAX3221EEAE-T should be requested through the Request a Quote form on this page. The request should state the required quantity, reel quantity, shipment destination, and target schedule. This approach provides a current commercial response for the exact -T tape-and-reel ordering code rather than using a stale historical unit-price figure.

Data referensi engineering untuk MAX3221EEAE-T — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MAX3221EEAE-T for a compact RS-232 port requiring one driver, one receiver, a 3.0V to 5.5V supply, and automatic power reduction at 1µA. Its 250kbps rating is appropriate for command and control links rather than high-volume factory protocols, while ±15kV ESD protection is useful on exposed connectors. MAX3221ECAE+T is a close same-brand candidate when a different ordering temperature option is preferred. MAX3221EIDB is suitable when its suffix-specific qualification and lifecycle conditions better match the product. MAX3221CAE+ provides another same-family option after checking its device-specific limits. ICL3221EIAZ-T is the cross-brand candidate when sourcing flexibility is important, provided its pin functions, supply limits, data rate, ESD rating, and temperature range match the system requirements.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MAX3221ECAE+T MAX3221EIDB MAX3221CAE+ ICL3221EIAZ-T
Brand Analog Devices Analog Devices Analog Devices Analog Devices Renesas Electronics
Package 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount

Diferensiator Kunci

  • Exact 250kbps MAX3221E family positioning (vsMAX3221ECAE+T)
  • Single-supply RS-232 operation (vsICL3221EIAZ-T)
  • Documented enhanced ESD protection (vsMAX3221EIDB)

Catatan Desain

Place the MAX3221EEAE-T charge-pump capacitors as close as practical to their associated pins and keep their return paths short. The RS-232 driver outputs should not be routed parallel with sensitive receiver inputs or low-level analog signals. Maintain the clearances and component placement shown in the manufacturer's layout guidance, particularly around the external connector and any protection network.

Decouple the 3.0V to 5.5V supply locally and route the current return through the device ground pins without split-plane paths. Because the MAX3221EEAE-T includes charge-pump circuitry, its supply and ground arrangement should follow the manufacturer reference layout. Verify the capacitor values and ESR or tolerance requirements in the datasheet rather than substituting values solely by capacitance.

Do not treat RS-232 and TTL logic levels as interchangeable. The transmitter converts logic-level inputs to RS-232 voltage levels, while the receiver converts incoming RS-232 levels to logic-compatible signals. Confirm the actual connector pin assignment, ground connection, and cable direction because the device's receiver and driver pins are not interchangeable with an RS-422 or RS-485 interface.

Keep the relatively high-voltage RS-232 driver nets away from clocks, reset lines, ADC inputs, and sensitive analog nodes. Where a board combines the MAX3221EEAE-T with switching supplies or high-speed digital circuitry, reserve space for connector-side protection and maintain a sensible return path. This reduces capacitive coupling into adjacent signal chains and improves behavior during cable insertion or removal.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The product is a general-purpose RS-232 interface IC. Automotive qualification, RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not confirmed for the exact MAX3221EEAE-T ordering code.

Pencarian Terkait

max3221eeae datasheet MAX3221EEAE-T datasheet MAX3221EEAE-T pinout MAX3221EEAE-T SSOP-16 MAX3221EEAE-T 250kbps MAX3221EEAE-T 3V to 5.5V Analog Devices MAX3221EEAE-T MAX3221EEAE-T equivalent MAX3221EEAE-T replacement MAX3221EEAE-T vs MAX3221ECAE+T MAX3221EEAE-T AutoShutdown MAX3221EEAE-T RS-232 transceiver MAX3221EEAE-T price MAX3221EEAE-T stock

Komponen dan Istilah Terkait

Analog Devices MAX3221EEAE-T MAX3221ECAE+T MAX3221EIDB MAX3221CAE+ ICL3221EIAZ-T MAX3221 MAX3221E RS-232 transceiver EIA/TIA-232 V.28 V.24 AutoShutdown automatic wakeup ESD protection ±15kV ESD protection 250kbps data rate 3.0V to 5.5V supply voltage 1µA shutdown current 16-pin SSOP SSOP package family surface mount RS-232 interface IC charge-pump capacitor industrial serial communication
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ