MAX3221EEAE-T - 250kbps RS-232 Transceiver | Analog Devices
N.º de pieza: MAX3221EEAE-T ✓ ActivoMAX3221EEAE-T Descripción general
An RS-232 transceiver is an interface IC that converts logic-level serial signals between a host or controller and the voltage-defined RS-232 bus. The MAX3221EEAE-T belongs to the RS-232 interface hierarchy, where a transceiver combines a transmitter for outbound data with a receiver for inbound data. Its single-driver, single-receiver arrangement is intended for point-to-point serial links and portable equipment requiring compact implementation.
The MAX3221EEAE-T operates from 3.0V to 5.5V, supports signaling rates through 250kbps, and provides ±15kV ESD protection. AutoShutdown reduces supply current to 1µA when no valid receiver signal is detected, while automatic wakeup reactivates the interface when valid data returns. These characteristics make the device useful where serial connectivity must coexist with strict power-consumption limits.
Internally, the device combines its RS-232 driver and receiver functions with on-board charge-pump support, enabling operation from a single 3.0V to 5.5V supply rather than a bipolar ±5V source. The enhanced ESD protection is intended to improve tolerance to electrostatic discharge encountered during cable connection, removal, and industrial or commercial handling.
Typical uses include industrial serial adapters, data-acquisition equipment, POS terminals, barcode scanners, test instruments, and embedded systems that exchange data with RS-232 peripherals. The 250kbps capability suits moderate-speed command and control links, while the low-power shutdown behavior benefits portable or intermittently connected systems.
PCB design should account for the 16-pin SSOP footprint, place the charge-pump capacitors as close as practical to their designated pins, and keep the RS-232 driver outputs and receiver inputs away from sensitive high-speed traces. Confirm the capacitor values, supply bypassing, and charge-pump layout against the manufacturer datasheet before releasing the PCB.
This product page combines the manufacturer family specifications, exact ordering information, structured alternatives, package details, and practical interface-design guidance to support component selection and board-layout planning.
Alternativas directas para MAX3221EEAE-T — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MAX3221EEAE-T (mismo factor de forma y huella) — difiere en Supply Voltage Range, AutoShutdown Supply Current, Interface Standard, Package, Product Type.
MAX3221ECAE+T
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MAX3221EIDB
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MAX3221CAE+
✅ Sustitución directaConsulte el precio
Ver hoja de datos →ICL3221EIAZ-T
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MAX3221EEUE+
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MAX3221EEAE-T Especificaciones
| Product Type | RS-232 transceiver |
| Driver Count | 1 driver |
| Receiver Count | 1 receiver |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| AutoShutdown Supply Current | 1µA |
| ESD Protection | ±15kV |
| Communication Standard | EIA/TIA-232 |
| Signal Compatibility | V.28 and V.24 |
| Power Features | Automatic shutdown and wakeup |
| Encapsulado | 16-pin SSOP |
| Tipo de montaje | Surface mount |
| Packaging | Tape & reel |
| Estado RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Guía de configuración de pines de MAX3221EEAE-T 16-pin ssop
Configuración de pines para MAX3221EEAE-T (encapsulado 16-pin ssop). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para MAX3221EEAE-T.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MAX3221EEAE-T es adecuado para 6 aplicacións: Industrial Data-Acquisition Equipment, POS Terminal and Retail Peripherals, Portable Test and Measurement Instruments, Embedded Serial Adapter, Barcode Scanner and Label Printer Interfaces, Serial Communication in Service Equipment.
Industrial Data-Acquisition Equipment
The MAX3221EEAE-T fits instrument control and data-transfer ports that require one RS-232 transmitter and one receiver. Its 3.0V to 5.5V supply range allows operation from common 3.3V or 5V logic rails, while 250kbps supports moderate-speed command and measurement traffic. The ±15kV ESD rating adds useful protection for an exposed cable-connected port. AutoShutdown lowers supply current to 1µA when the remote device is inactive, which is advantageous in unattended test systems. Place the charge-pump capacitors and input/output protection components according to the manufacturer layout guidance.
Recomendado
POS Terminal and Retail Peripherals
A MAX3221EEAE-T provides a compact power-saving link between a retail controller and a scanner, printer, or customer-facing terminal. The single-driver, single-receiver configuration is suitable for one full-duplex RS-232 port, and the 250kbps rate is more than adequate for typical command traffic. Operation from 3.0V to 5.5V simplifies interfacing with embedded logic. AutoShutdown can suppress the 1µA supply current during idle intervals, while ±15kV ESD protection improves robustness when the equipment is repeatedly connected and disconnected by operators.
Recomendado
Portable Test and Measurement Instruments
The MAX3221EEAE-T is well suited to handheld or battery-powered test instruments that communicate with a host computer over RS-232. Its 1µA AutoShutdown current reduces the load when the link is idle, and the 250kbps signaling rate accommodates instrument commands and moderate data transfers. The 3.0V to 5.5V operating range supports mixed-voltage portable designs. The 16-pin SSOP package limits board area, although designers should preserve the recommended charge-pump capacitor placement and provide appropriate protection at the external connector.
Recomendado
Embedded Serial Adapter
The MAX3221EEAE-T can bridge a 3.3V or 5V embedded controller to an RS-232 device without a bipolar transceiver supply. Its one-driver, one-receiver organization matches a single point-to-point port, while 250kbps supports configuration and control protocols. Automatic shutdown and wakeup reduce the need for firmware to manage power explicitly, with the specified shutdown supply current reaching 1µA. Designers should verify logic thresholds, RS-232 output levels, and the complete pin assignment in the manufacturer datasheet before creating a production adapter PCB.
Recomendado
Barcode Scanner and Label Printer Interfaces
A MAX3221EEAE-T provides a compact interface between an embedded controller and a barcode scanner, magnetic-stripe reader, or label printer using RS-232. The 250kbps rate supports rapid short command sequences and typical scanner transactions without imposing excessive timing margins. Automatic power reduction is useful in equipment that spends substantial time idle, and the device wakes when valid receiver activity is detected. The ±15kV ESD protection rating is especially relevant to peripheral cables that may be serviced by operators. Keep the RS-232 traces away from sensitive clock and analog routing.
Recomendado
Serial Communication in Service Equipment
The MAX3221EEAE-T supports diagnostic and configuration links in service equipment that communicates with legacy RS-232 systems. Its 3.0V to 5.5V operation permits use with modern digital rails, and its 250kbps maximum data rate is suitable for command-oriented protocols. The 16-pin SSOP package reduces board space, while the 1µA AutoShutdown state lowers standby demand. For field-installed equipment, route the external connector through suitable protection and verify the grounding strategy so that cable transients do not couple directly into sensitive logic or power circuitry.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MAX3221EEAE-T — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MAX3221ECAE+T | MAX3221EIDB | MAX3221CAE+ | ICL3221EIAZ-T |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Renesas Electronics |
| Package | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP |
| Product Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Diferenciadores clave
- Exact 250kbps MAX3221E family positioning (frente a MAX3221ECAE+T)
- Single-supply RS-232 operation (frente a ICL3221EIAZ-T)
- Documented enhanced ESD protection (frente a MAX3221EIDB)
Notas de diseño
Place the MAX3221EEAE-T charge-pump capacitors as close as practical to their associated pins and keep their return paths short. The RS-232 driver outputs should not be routed parallel with sensitive receiver inputs or low-level analog signals. Maintain the clearances and component placement shown in the manufacturer's layout guidance, particularly around the external connector and any protection network.
Decouple the 3.0V to 5.5V supply locally and route the current return through the device ground pins without split-plane paths. Because the MAX3221EEAE-T includes charge-pump circuitry, its supply and ground arrangement should follow the manufacturer reference layout. Verify the capacitor values and ESR or tolerance requirements in the datasheet rather than substituting values solely by capacitance.
Do not treat RS-232 and TTL logic levels as interchangeable. The transmitter converts logic-level inputs to RS-232 voltage levels, while the receiver converts incoming RS-232 levels to logic-compatible signals. Confirm the actual connector pin assignment, ground connection, and cable direction because the device's receiver and driver pins are not interchangeable with an RS-422 or RS-485 interface.
Keep the relatively high-voltage RS-232 driver nets away from clocks, reset lines, ADC inputs, and sensitive analog nodes. Where a board combines the MAX3221EEAE-T with switching supplies or high-speed digital circuitry, reserve space for connector-side protection and maintain a sensible return path. This reduces capacitive coupling into adjacent signal chains and improves behavior during cable insertion or removal.
Información de cumplimiento
The product is a general-purpose RS-232 interface IC. Automotive qualification, RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not confirmed for the exact MAX3221EEAE-T ordering code.