MAX3232EIDR - 250kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MPN: MAX3232EIDR ✓ AktifMAX3232EIDR Ringkasan
An RS-232 transceiver is an interface IC within the broader class of interface semiconductors. It combines a line driver, line receiver, and charge-pump voltage converter in one package. The MAX3232EIDR provides two driver and two receiver channels, allowing two simultaneous RS-232 links or one bidirectional port when the driver and receiver channels are paired. Its single 3 V to 5.5 V supply simplifies integration with modern 3.3 V and 5 V digital systems.
The principal features include two RS-232 drivers, two RS-232 receivers, a maximum signaling rate of 250 kbps, and ESD protection to ±15 kV on the serial-port connection pins. According to the Texas Instruments MAX3232 product page, the MAX3232 family is recommended for new designs. The MAX3232E is an improved direct drop-in replacement for the original MAX3232, while the MAX3232EIDR suffix identifies the specified device ordering configuration.
Internally, the charge-pump circuit develops the positive and negative voltage levels required by the RS-232 signaling standard. Transmit drivers convert CMOS/TTL-compatible input signals to RS-232 levels, while receive channels detect bipolar RS-232 inputs and produce CMOS/TTL-compatible outputs. The architecture makes this device appropriate for equipment with a host UART, an embedded controller, or an industrial data-acquisition system that must communicate with a legacy serial port.
Typical uses include barcode scanners, instrumentation, industrial control links, point-of-sale equipment, and service-console connections. The 250 kbps maximum data rate supports conventional serial communication while the ±15 kV ESD rating helps protect exposed connector inputs. In battery-powered or space-constrained equipment, its single-supply operation can simplify voltage planning and reduce the number of external rails.
When laying out the circuit, place charge-pump capacitors and the charge-pump flyback capacitor close to their associated device pins, and route RS-232 connector traces away from sensitive analog and high-speed digital paths. Confirm that the selected transceiver supports the baud rate, cable length, logic levels, and connector protection required by the target RS-232 environment. The IC-level ESD rating does not replace correct signal routing and appropriate external protection.
This page combines the device specifications, sourcing workflow, family-level alternatives, and application guidance into a practical engineering resource. It also distinguishes verified device characteristics from package-ordering details and highlights the checks needed when evaluating a pin-compatible replacement for an existing MAX3232EIDR design.
Alternatif penggantian untuk MAX3232EIDR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MAX3232EIDR (sama faktor bentuk dan footprint) — berbeda di dalam Product Type, Package, Supply Voltage Range, Maximum Data Rate, ESD Protection.
MAX3232ID
✅ Drop-InKontak untuk harga
Lihat Datasheet →MAX3232EIPWG4
✅ Drop-InKontak untuk harga
Lihat Datasheet →TRS3232ECD
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MAX3232EIDR Spesifikasi
| Product Type | Dual RS-232 line driver/receiver transceiver |
| Number of Drivers | 2 drivers |
| Number of Receivers | 2 receivers |
| Maximum Data Rate | 250 kbps |
| Supply Voltage Range | 3 V to 5.5 V |
| Nominal Supply Example | 3.3 V |
| Interface Standard | RS-232 |
| ESD Protection | ±15 kV |
| Charge Pump | Dual charge-pump circuit |
| Paket | 16-SOIC (0.154 inch, 3.90 mm width) |
| Tipe Mounting | Surface mount |
| Packaging | Tube |
| Suhu Kerja | 0 °C to 70 °C |
| Lead-Free Status | Lead free |
MAX3232EIDR 16-soic (0.154 inch, 3.90 mm width) Diamant Konfigurasi Panduan
Konfigurasi pin untuk MAX3232EIDR (16-soic (0.154 inch, 3.90 mm width) pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk MAX3232EIDR.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MAX3232EIDR cocok untuk 6 aplikasis: Embedded UART-to-RS-232 Interface, Industrial Control Serial Port, Barcode Scanner and POS Equipment, Test and Measurement Equipment, Instrumentation and Data Acquisition, Serial Service and Diagnostic Port.
Embedded UART-to-RS-232 Interface
The MAX3232EIDR suits embedded controllers that expose a logic-level UART but need an RS-232 port for a service connector, controller, or peripheral. Its 3 V to 5.5 V supply range permits operation from the same 3.3 V or 5 V rail used by many embedded processors, while the two drivers and two receivers support two RS-232 channels. The 250 kbps maximum signaling rate covers many legacy control protocols. Place the required charge-pump capacitors close to the IC, connect the receiver and driver logic to the correct UART pins, and verify that the MCU’s logic thresholds match the transceiver interface.
Direkomendasikan
Industrial Control Serial Port
MAX3232EIDR provides a compact interface for industrial controllers, service panels, and configuration tools that communicate through RS-232. The device combines two drivers, two receivers, and a dual charge-pump circuit in one 16-SOIC package, reducing the number of discrete interface components. Its 250 kbps maximum data rate is suitable for many supervisory protocols, while ±15 kV ESD protection adds defense at the IC pins. Because the listed operating temperature is 0 °C to 70 °C, confirm environmental requirements and add connector-level protection where cables leave the enclosure.
Direkomendasikan
Barcode Scanner and POS Equipment
The MAX3232EIDR is appropriate for barcode scanners, point-of-sale terminals, and peripheral controllers that use an RS-232 host port. Two driver and two receiver channels provide flexibility for connecting more than one unidirectional link or one full-duplex port. Operating from 3 V to 5.5 V supports both legacy 5 V equipment and mixed-voltage portable systems, and the 250 kbps rate exceeds the throughput of many short-distance scanner protocols. Use the UART signal levels and protocol timing from the scanner specification, and ensure the cable length and grounding strategy comply with RS-232 practice.
Direkomendasikan
Test and Measurement Equipment
MAX3232EIDR can connect a test instrument, laboratory peripheral, or calibration device to a legacy RS-232 controller. The 250 kbps limit accommodates many instrument-control protocols, and the two-channel arrangement can support separate transmit and receive paths when the protocol requires them. Its single 3 V to 5.5 V supply simplifies integration with mixed legacy and modern test electronics. Keep the transceiver and charge-pump network away from precision analog sections, use a protected connector path for external cables, and verify grounding because long or unbalanced RS-232 cables can introduce noise and offset errors.
Direkomendasikan
Instrumentation and Data Acquisition
The MAX3232EIDR provides a practical RS-232 link between a data-acquisition controller and older laboratory instruments. Two driver and two receiver channels can handle a bidirectional instrument connection, while the 250 kbps data rate supports command exchange and moderate measurement-data transfer. The 3 V to 5.5 V operating range makes it compatible with contemporary acquisition hardware while preserving legacy port compatibility. Place the device near the connector where practical, use a short ground return, and isolate sensitive analog measurement paths from the charge-pump and cable transients.
Direkomendasikan
Serial Service and Diagnostic Port
MAX3232EIDR is useful for adding a service or diagnostic connection to appliances, machinery, and field-support equipment. The dual-channel transceiver can expose separate RS-232 paths when required, and the 3 V to 5.5 V range supports systems built around either 3.3 V or 5 V logic. Its 250 kbps ceiling is more than adequate for configuration consoles and firmware update links. Design the interface so exposed connector pins receive suitable surge protection, maintain a dependable signal ground, and use the manufacturer’s recommended charge-pump network to maintain proper driver voltage at the maximum intended baud rate.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MAX3232EIDR — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MAX3232ID | MAX3232E | TRS3232ECD |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-SOIC | 16-SOIC - same package | 16-SOIC - same package | 16-SOIC - same package |
| Device Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Drop-In Relationship | MAX3232EIDR ordering configuration | MAX3232-family pin-compatible candidate | Improved direct drop-in replacement for MAX3232 | Cross-reference candidate requiring datasheet verification |
Diferensiator Kunci
- Manufacturer-backed improved MAX3232 family positioning (vsMAX3232ID)
- Documented 250 kbps maximum signaling rate (vsTRS3232ECD)
- Verified ±15 kV ESD protection (vsTRS3232ECD)
- Three-to-five-point-five-volt single-supply operation (vsMAX3232ID)
Catatan Desain
Place the charge-pump capacitors and the charge-pump flyback capacitor directly beside the pins shown in the Texas Instruments MAX3232 recommended layout. Keep the switching loop short and connect it to a low-impedance ground plane. Do not route these high-current paths between the RS-232 connector and the transceiver because the resulting charge-pump current can couple into the received signal. Use the manufacturer’s capacitor values and topology as the controlling reference for the layout.
Do not assume that any 2/2 RS-232 transceiver is interchangeable because connector shape and logic-pin names can differ even when the package count matches. Verify pin 1 orientation, charge-pump capacitor assignments, receiver enable or fail-safe behavior, input thresholds, and the no-power state. Before approving a replacement, compare the MAX3232EIDR pin diagram against the alternative’s 16-SOIC diagram and confirm that no receiver output changes state unexpectedly during power-up.
Route the exposed RS-232 connector pins as short, direct paths and keep them away from crystal, ADC, reference, and high-speed clock traces. Provide a nearby chassis or signal-ground return according to the interface design, and apply external ESD or surge protection when the cable leaves the equipment. The MAX3232EIDR’s ±15 kV internal ESD rating improves device robustness but does not remove radiated coupling, ground potential differences, or damage caused by surges exceeding the device ratings.
Decouple the transceiver supply near the IC and size the trace and ground return for the charge-pump current pulses. The 3 V to 5.5 V input range permits operation from 3.3 V or 5 V rails, but the usable RS-232 output voltage and signal margin also depend on the supply, load, and charge-pump capacitor network. Verify the driver output at the highest baud rate and worst-case cable load rather than judging operation only from the nominal logic supply.
Informasi Konformitas
The device listing identifies the MAX3232EIDR as lead free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations were not established from the cited product and distributor records.