Texas Instruments

MAX3232EIDR - 250kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)

MPN: MAX3232EIDR ✓ Aktif
3 V to 5.5 V Vdss 16-SOIC (0.154 inch, 3.90 mm width) Package
MOQ: 1 |

MAX3232EIDR Genel Bakış

The Texas Instruments MAX3232EIDR is a dual-channel RS-232 line driver and receiver transceiver rated for 250 kbps, operating from a 3 V to 5.5 V supply and providing ±15 kV ESD protection. It is packaged in a 16-pin SOIC package. The device is intended for portable and industrial equipment that converts logic-level UART signals into RS-232 levels and converts received RS-232 signals back to logic levels.

An RS-232 transceiver is an interface IC within the broader class of interface semiconductors. It combines a line driver, line receiver, and charge-pump voltage converter in one package. The MAX3232EIDR provides two driver and two receiver channels, allowing two simultaneous RS-232 links or one bidirectional port when the driver and receiver channels are paired. Its single 3 V to 5.5 V supply simplifies integration with modern 3.3 V and 5 V digital systems.

The principal features include two RS-232 drivers, two RS-232 receivers, a maximum signaling rate of 250 kbps, and ESD protection to ±15 kV on the serial-port connection pins. According to the Texas Instruments MAX3232 product page, the MAX3232 family is recommended for new designs. The MAX3232E is an improved direct drop-in replacement for the original MAX3232, while the MAX3232EIDR suffix identifies the specified device ordering configuration.

Internally, the charge-pump circuit develops the positive and negative voltage levels required by the RS-232 signaling standard. Transmit drivers convert CMOS/TTL-compatible input signals to RS-232 levels, while receive channels detect bipolar RS-232 inputs and produce CMOS/TTL-compatible outputs. The architecture makes this device appropriate for equipment with a host UART, an embedded controller, or an industrial data-acquisition system that must communicate with a legacy serial port.

Typical uses include barcode scanners, instrumentation, industrial control links, point-of-sale equipment, and service-console connections. The 250 kbps maximum data rate supports conventional serial communication while the ±15 kV ESD rating helps protect exposed connector inputs. In battery-powered or space-constrained equipment, its single-supply operation can simplify voltage planning and reduce the number of external rails.

When laying out the circuit, place charge-pump capacitors and the charge-pump flyback capacitor close to their associated device pins, and route RS-232 connector traces away from sensitive analog and high-speed digital paths. Confirm that the selected transceiver supports the baud rate, cable length, logic levels, and connector protection required by the target RS-232 environment. The IC-level ESD rating does not replace correct signal routing and appropriate external protection.

This page combines the device specifications, sourcing workflow, family-level alternatives, and application guidance into a practical engineering resource. It also distinguishes verified device characteristics from package-ordering details and highlights the checks needed when evaluating a pin-compatible replacement for an existing MAX3232EIDR design.

Drop-in alternatifler için MAX3232EIDR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MAX3232EIDR (aynı form faktörü ve ayağa oturma) — farklı olan Product Type, Package, Supply Voltage Range, Maximum Data Rate, ESD Protection.

Texas Instruments
Product Type: Dual RS-232 driver/receiver
Package: 16-pin SOIC (DW), 0.295 inch / 7.50 mm width
Supply Voltage Range: 4.5 V to 5.5 V
İle Karşılaştır MAX3232EIDR →
Analog Devices
Package: 16-SOIC
Supply Voltage Range: 3.0 V to 5.5 V
Maximum Data Rate: 1 Mbps
İle Karşılaştır MAX3232EIDR →
Analog Devices
Product Type: Dual RS-232 transceiver
Package: 16-pin SOIC
Supply Voltage Range: 3.0V to 5.5V
İle Karşılaştır MAX3232EIDR →
Texas Instruments
Product Type: Dual RS-232 line driver/receiver
Package: 16-pin SOIC
ESD Protection: ±15 kV IEC
İle Karşılaştır MAX3232EIDR →
Texas Instruments
Package: 16-TSSOP (0.173 in, 4.40 mm width)
İle Karşılaştır MAX3232EIDR →
Maxim Integrated
Product Type: RS-232 line driver and receiver transceiver
Package: 16-SOIC
Supply Voltage Range: 3.0V to 5.5V
İle Karşılaştır MAX3232EIDR →
Texas Instruments
Product Type: 2/2 RS-232 line driver and receiver
Package: 16-pin SOIC
Maximum Data Rate: 250 kbit/s
İle Karşılaştır MAX3232EIDR →

MAX3232ID

✅ Yerleştirme
Texas Instruments
📦 16-SOIC
2/2 RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbit/s · 2 · 2 · ±15 kV · 300 µA · 5 V logic

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3232EIPWG4

✅ Yerleştirme
Texas Instruments
📦 16-SOIC
RS-232 Line Driver/Receiver · 2 · 2 · 3 V to 5.5 V · 250 kbps · +/-15 kV · +/-8 kV · +/-15 kV

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

TRS3232ECD

✅ Yerleştirme
📦 16-SOIC
Same dual RS-232 transceiver class in 16-SOIC, with supplier-specific electrical tolerances, capacitor values, and ordering details requiring comparison

📋 Katalogda Olmayan Referans Alternatifi

MAX3232EIDR Özellikler

Product Type Dual RS-232 line driver/receiver transceiver
Number of Drivers 2 drivers
Number of Receivers 2 receivers
Maximum Data Rate 250 kbps
Supply Voltage Range 3 V to 5.5 V
Nominal Supply Example 3.3 V
Interface Standard RS-232
ESD Protection ±15 kV
Charge Pump Dual charge-pump circuit
Paket 16-SOIC (0.154 inch, 3.90 mm width)
Montaj Türü Surface mount
Packaging Tube
İşletim Sıcaklığı 0 °C to 70 °C
Lead-Free Status Lead free

MAX3232EIDR 16-soic (0.154 inch, 3.90 mm width) Pin Yapısı Kılavuzu

MAX3232EIDR (16-soic (0.154 inch, 3.90 mm width) paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

16-soic (0.154 inch, 3.90 mm width) paket pin çizelgesi için MAX3232EIDR

Ayrıntılı pin çıkış verisi mevcut değil: MAX3232EIDR.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX3232EIDR için uygundur 6 uygulamas: Embedded UART-to-RS-232 Interface, Industrial Control Serial Port, Barcode Scanner and POS Equipment, Test and Measurement Equipment, Instrumentation and Data Acquisition, Serial Service and Diagnostic Port.

🔧

Embedded UART-to-RS-232 Interface

The MAX3232EIDR suits embedded controllers that expose a logic-level UART but need an RS-232 port for a service connector, controller, or peripheral. Its 3 V to 5.5 V supply range permits operation from the same 3.3 V or 5 V rail used by many embedded processors, while the two drivers and two receivers support two RS-232 channels. The 250 kbps maximum signaling rate covers many legacy control protocols. Place the required charge-pump capacitors close to the IC, connect the receiver and driver logic to the correct UART pins, and verify that the MCU’s logic thresholds match the transceiver interface.

🏭

Industrial Control Serial Port

MAX3232EIDR provides a compact interface for industrial controllers, service panels, and configuration tools that communicate through RS-232. The device combines two drivers, two receivers, and a dual charge-pump circuit in one 16-SOIC package, reducing the number of discrete interface components. Its 250 kbps maximum data rate is suitable for many supervisory protocols, while ±15 kV ESD protection adds defense at the IC pins. Because the listed operating temperature is 0 °C to 70 °C, confirm environmental requirements and add connector-level protection where cables leave the enclosure.

📱

Barcode Scanner and POS Equipment

The MAX3232EIDR is appropriate for barcode scanners, point-of-sale terminals, and peripheral controllers that use an RS-232 host port. Two driver and two receiver channels provide flexibility for connecting more than one unidirectional link or one full-duplex port. Operating from 3 V to 5.5 V supports both legacy 5 V equipment and mixed-voltage portable systems, and the 250 kbps rate exceeds the throughput of many short-distance scanner protocols. Use the UART signal levels and protocol timing from the scanner specification, and ensure the cable length and grounding strategy comply with RS-232 practice.

🧩

Test and Measurement Equipment

MAX3232EIDR can connect a test instrument, laboratory peripheral, or calibration device to a legacy RS-232 controller. The 250 kbps limit accommodates many instrument-control protocols, and the two-channel arrangement can support separate transmit and receive paths when the protocol requires them. Its single 3 V to 5.5 V supply simplifies integration with mixed legacy and modern test electronics. Keep the transceiver and charge-pump network away from precision analog sections, use a protected connector path for external cables, and verify grounding because long or unbalanced RS-232 cables can introduce noise and offset errors.

📺

Instrumentation and Data Acquisition

The MAX3232EIDR provides a practical RS-232 link between a data-acquisition controller and older laboratory instruments. Two driver and two receiver channels can handle a bidirectional instrument connection, while the 250 kbps data rate supports command exchange and moderate measurement-data transfer. The 3 V to 5.5 V operating range makes it compatible with contemporary acquisition hardware while preserving legacy port compatibility. Place the device near the connector where practical, use a short ground return, and isolate sensitive analog measurement paths from the charge-pump and cable transients.

⚡

Serial Service and Diagnostic Port

MAX3232EIDR is useful for adding a service or diagnostic connection to appliances, machinery, and field-support equipment. The dual-channel transceiver can expose separate RS-232 paths when required, and the 3 V to 5.5 V range supports systems built around either 3.3 V or 5 V logic. Its 250 kbps ceiling is more than adequate for configuration consoles and firmware update links. Design the interface so exposed connector pins receive suitable surge protection, maintain a dependable signal ground, and use the manufacturer’s recommended charge-pump network to maintain proper driver voltage at the maximum intended baud rate.

What is the MAX3232EIDR?
The MAX3232EIDR is a Texas Instruments dual RS-232 transceiver containing two line drivers, two line receivers, and a dual charge-pump circuit. According to the Texas Instruments MAX3232 product page, it operates from 3 V to 5.5 V, supports data rates up to 250 kbps, and includes ±15 kV ESD protection. The MAX3232EIDR ordering configuration is supplied in a 16-SOIC package, making it suitable for conventional surface-mounted serial-interface equipment.
What are the key specifications of MAX3232EIDR that engineers should know?
The MAX3232EIDR combines two RS-232 drivers, two RS-232 receivers, a 3 V to 5.5 V supply range, and a maximum signaling rate of 250 kbps. Texas Instruments specifies ±15 kV ESD protection for the serial-port connection pins. The device uses a dual charge-pump architecture and is offered in a 16-SOIC package. These parameters position it for legacy RS-232 ports on embedded, industrial, and service equipment using 3.3 V or 5 V logic.
Where can I download the MAX3232EIDR datasheet PDF?
The official MAX3232EIDR documentation is accessed through the Texas Instruments MAX3232 product page at https://www.ti.com/product/MAX3232. That page links the manufacturer datasheet and ordering information for the MAX3232 family, including the MAX3232EIDR configuration. It also provides the authoritative supply-voltage, data-rate, and ESD-protection details. Use the manufacturer copy for pin assignments, recommended capacitors, operating limits, and package drawings before laying out a PCB.
Where can I find the MAX3232EIDR pinout?
The MAX3232EIDR pin assignments and package drawing appear in the pin-configuration section of the Texas Instruments MAX3232 datasheet linked from the official product page. The device is a 16-SOIC package, so the physical drawing uses 16 numbered positions. Use that manufacturer diagram for the exact driver inputs, receiver outputs, charge-pump capacitor connections, supply pins, and ground pins rather than relying on a generic RS-232 transceiver diagram.
Is MAX3232EIDR suitable for a 3.3 V UART?
The MAX3232EIDR is suitable for a 3.3 V UART because its specified supply-voltage range is 3 V to 5.5 V. According to the Texas Instruments MAX3232 product-page data, the interface supports signaling rates up to 250 kbps and provides ±15 kV ESD protection. The UART itself must use compatible logic levels, and the complete design must provide the charge-pump capacitors and decoupling recommended in the manufacturer datasheet.
What is the difference between MAX3232EIDR and MAX3232ID?
The MAX3232EIDR is the E-series MAX3232 configuration in a 16-SOIC package, while MAX3232ID is identified in the available cross-reference material as another MAX3232 family ordering configuration. Texas Instruments describes MAX3232E as an improved direct drop-in replacement for MAX3232. For an exact PCB substitution, compare the complete ordering codes, temperature grade, package, and all electrical limits in the manufacturer datasheet rather than relying on the family relationship alone.
What is the best drop-in replacement for MAX3232EIDR?
The closest documented drop-in choices are MAX3232ID, MAX3232E, and TRS3232ECD after confirming their exact package and ordering suffixes against the target design. Texas Instruments specifically identifies MAX3232E as an improved direct drop-in replacement for MAX3232, and the available comparison material pairs TRS3232ECD with MAX3232EIDR. No additional pin-compatible alternatives could be established from the manufacturer comparison without risking an incorrect package or thermal-grade substitution.
Can TRS3232ECD replace MAX3232EIDR?
TRS3232ECD is a candidate for evaluating as a MAX3232EIDR replacement because the available comparison material places the two parts together as RS-232 transceivers. It is not automatically a drop-in substitute: confirm the 16-pin SOIC footprint, power range, 250 kbps data-rate requirement, charge-pump capacitor values, and temperature grade in the TRS3232ECD datasheet. A candidate cross-reference should receive this verification before being approved for production.
Is MAX3232EIDR the same as TRS3232ECD?
No exact equivalence can be claimed solely from their similar RS-232 functions. The MAX3232EIDR is a Texas Instruments 2/2 transceiver with a 3 V to 5.5 V supply range and 250 kbps maximum data rate, while TRS3232ECD is identified in available comparison material as a competing device. Check package, logic thresholds, slew behavior, charge-pump components, ESD ratings, and temperature limits in each manufacturer datasheet before treating either part as interchangeable.
When should I choose MAX3232EIDR over TRS3232ECD?
Choose MAX3232EIDR when its documented 3 V to 5.5 V supply range, 250 kbps maximum data rate, ±15 kV ESD protection, and 16-SOIC implementation fit the design more directly. Consider TRS3232ECD when its lower-cost sourcing or second-source strategy is important and its datasheet confirms every board-level requirement. The decision should be based on verified electrical and package compatibility rather than the shared RS-232 function.
Is MAX3232EIDR suitable for industrial control and test equipment?
The MAX3232EIDR is functionally suitable for RS-232 connections in industrial control and test equipment when the specified operating range covers the installation environment and the link meets the required baud rate and cable length. Its 250 kbps capability supports conventional RS-232 service and diagnostic ports. The listed operating temperature is 0 °C to 70 °C, so applications outside that range require a different device grade with verified temperature limits.
How should the MAX3232EIDR charge-pump capacitors be placed?
Place the charge-pump and flyback capacitors close to their named pins and the device ground connection, following the exact layout in the Texas Instruments MAX3232 datasheet. Keep these high-current charge-pump loops compact and away from sensitive analog inputs. The manufacturer’s recommended capacitor values and connection diagram should control placement because incorrect values alter startup behavior, supply ripple, or the voltage available on the RS-232 driver outputs.
What is the MAX3232EIDR lead time and stock status?
The current lead time, minimum order quantity, and stock status should be requested through the Request a Quote form on this page. The manufacturer product page provides family availability and ordering information, while exact supply conditions can change with the selected package and order quantity. Use the quote form to confirm current production status, delivery timing, and orderable configuration before committing a new design.
Where can I buy MAX3232EIDR online?
Use the Request a Quote form on this page to request MAX3232EIDR availability, current delivery information, and order support. The exact ordering configuration matters because package, temperature grade, and shipping configuration are encoded in the MPN. This page does not present a static purchase price, so the quote workflow is the appropriate route for a current commercial commitment and lead-time confirmation.
What is the price of MAX3232EIDR?
Request a current MAX3232EIDR quotation through the Request a Quote form on this page. The manufacturer offers the MAX3232 family in multiple ordering configurations, and commercial terms can depend on quantity, package, and shipment method. Use the form to obtain a price and lead time for the exact MAX3232EIDR configuration rather than relying on a starting-from price for a different variant.
Does the MAX3232EIDR ±15 kV ESD rating eliminate the need for connector protection?
No. The ±15 kV ESD rating is an internal device characteristic for the serial-port connection pins, but it does not remove the need for good PCB layout or a suitable external protection strategy. Keep the RS-232 traces away from sensitive circuitry, provide a low-impedance ground path, and consider external surge or ESD protection according to the connector environment. The complete system must still meet its interface protection target.

Mühendislik referans verileri: MAX3232EIDR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose MAX3232EIDR when the design needs a 2/2 RS-232 transceiver with a verified 250 kbps data rate, ±15 kV ESD protection, and operation from a 3 V to 5.5 V supply in a 16-SOIC package. MAX3232ID is the closest same-family option when its ordering code and temperature grade match the board, while MAX3232E offers a manufacturer-supported improvement path from the original MAX3232. Evaluate TRS3232ECD when a second-source strategy is important, but verify its complete electrical limits, pin behavior, and charge-pump requirements before approval. For any alternative, confirm package drawing, pin numbering, UART logic thresholds, operating temperature, receiver behavior during startup, and cable-level protection. A shared RS-232 function and SOIC outline alone do not establish production interchangeability.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX3232ID MAX3232E TRS3232ECD
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-SOIC 16-SOIC - same package 16-SOIC - same package 16-SOIC - same package
Device Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Drop-In Relationship MAX3232EIDR ordering configuration MAX3232-family pin-compatible candidate Improved direct drop-in replacement for MAX3232 Cross-reference candidate requiring datasheet verification

Ana Farklılayıcılar

  • Manufacturer-backed improved MAX3232 family positioning (karşılaştırma:MAX3232ID)
  • Documented 250 kbps maximum signaling rate (karşılaştırma:TRS3232ECD)
  • Verified ±15 kV ESD protection (karşılaştırma:TRS3232ECD)
  • Three-to-five-point-five-volt single-supply operation (karşılaştırma:MAX3232ID)

Tasarım Notları

Place the charge-pump capacitors and the charge-pump flyback capacitor directly beside the pins shown in the Texas Instruments MAX3232 recommended layout. Keep the switching loop short and connect it to a low-impedance ground plane. Do not route these high-current paths between the RS-232 connector and the transceiver because the resulting charge-pump current can couple into the received signal. Use the manufacturer’s capacitor values and topology as the controlling reference for the layout.

Do not assume that any 2/2 RS-232 transceiver is interchangeable because connector shape and logic-pin names can differ even when the package count matches. Verify pin 1 orientation, charge-pump capacitor assignments, receiver enable or fail-safe behavior, input thresholds, and the no-power state. Before approving a replacement, compare the MAX3232EIDR pin diagram against the alternative’s 16-SOIC diagram and confirm that no receiver output changes state unexpectedly during power-up.

Route the exposed RS-232 connector pins as short, direct paths and keep them away from crystal, ADC, reference, and high-speed clock traces. Provide a nearby chassis or signal-ground return according to the interface design, and apply external ESD or surge protection when the cable leaves the equipment. The MAX3232EIDR’s ±15 kV internal ESD rating improves device robustness but does not remove radiated coupling, ground potential differences, or damage caused by surges exceeding the device ratings.

Decouple the transceiver supply near the IC and size the trace and ground return for the charge-pump current pulses. The 3 V to 5.5 V input range permits operation from 3.3 V or 5 V rails, but the usable RS-232 output voltage and signal margin also depend on the supply, load, and charge-pump capacitor network. Verify the driver output at the highest baud rate and worst-case cable load rather than judging operation only from the nominal logic supply.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Yes
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The device listing identifies the MAX3232EIDR as lead free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations were not established from the cited product and distributor records.

İlgili Aramalar

MAX3232EIDR datasheet MAX3232EIDR pinout MAX3232EIDR datasheet pdf Texas Instruments MAX3232EIDR MAX3232EIDR 16-SOIC MAX3232EIDR 250kbps RS-232 MAX3232EIDR replacement MAX3232EIDR equivalent MAX3232EIDR vs TRS3232ECD MAX3232EIDR price MAX3232EIDR stock MAX3232EIDR UART RS-232

İlgili Bileşenler ve Terimler

Texas Instruments MAX3232EIDR MAX3232ID MAX3232E TRS3232ECD RS-232 RS-232 transceiver line driver line receiver dual charge-pump UART 250 kbps 3 V to 5.5 V power supply ESD protection ±15 kV ESD 16-SOIC SOIC package family surface-mount technology embedded systems industrial control data acquisition barcode scanner lead-free RoHS REACH
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle