MAX3243IDWRG4 - 3.3V/5V RS-232 IC | Texas Instruments
MPN: MAX3243IDWRG4 ✓ AktifMAX3243IDWRG4 Ringkasan
An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and equipment using the RS-232 standard. A line driver translates host-side digital signals into RS-232 levels, while a receiver converts the bipolar serial signal back into a digital level. Within the interface hierarchy, the MAX3243IDWRG4 belongs to the RS-232 transceiver class of multi-channel interface ICs used to bridge TTL, CMOS, and serial equipment.
The device operates from 3 V to 5.5 V, allowing use with both 3.3 V and 5 V systems. It provides three RS-232 drivers and five receivers, making it useful for designs with several communication ports or more receive inputs than transmit outputs. Its ±15 kV human-body-model ESD protection improves robustness at externally accessible connector pins, while its 1 µA shutdown supply current supports power-conscious systems that disable the interface when it is not needed.
The MAX3243 family combines charge-pump voltage generation and CMOS driver and receiver circuitry in one device. Charge-pump circuitry develops the RS-232 level-shift voltage required when the supply cannot directly generate the required output swing. This integrated approach reduces the number of external components compared with discrete RS-232 interface networks and simplifies connections among logic-level controllers and remote serial equipment.
Typical uses include industrial control equipment, instrumentation, data loggers, POS terminals, and computer peripheral connections. The five receiver channels can monitor multiple incoming lines, while the three drivers support outbound RS-232 channels. Systems using the shutdown function can reduce supply consumption when the interface is inactive, although power-management timing must be coordinated with the host controller.
PCB layout should follow the capacitor and charge-pump recommendations in the manufacturer datasheet, particularly regarding input and output bypassing capacitors and placement near the device. Keep the RS-232 connector side physically separated from sensitive logic or analog circuitry where practical, and route high-energy external lines away from low-level signal traces to reduce ESD and surge-related coupling.
This product page combines electrical characteristics, interface-use guidance, package details, and design considerations to support faster component selection. It also distinguishes verified pin-compatible replacement options from alternatives that require a different footprint, helping engineers evaluate a MAX3243IDWRG4 redesign before committing to a PCB change.
Alternatif penggantian untuk MAX3243IDWRG4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MAX3243IDWRG4 (sama faktor bentuk dan footprint) — berbeda di dalam ESD Protection, Package, Product Type, RoHS Status.
MAX3243EIDWRG4
✅ Drop-InKontak untuk harga
Lihat Datasheet →MAX3243CDWE4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MAX3243IDWRG4 Spesifikasi
| Product Type | Multichannel RS-232 line driver and receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Number of Drivers | 3 |
| Number of Receivers | 5 |
| Interface Technology | RS-232 |
| Logic Technology | CMOS |
| ESD Protection | ±15 kV HBM |
| Shutdown Supply Current | 1 µA |
| Rentang Suhu Kerja | -40 °C to +85 °C |
| Paket | 28-SOIC |
| Jumlah Pin | 28 pins |
| Tipe Mounting | Surface mount |
| Channel Configuration | 3/5 transceiver |
| Status RoHS | unknown |
| REACH Status | unknown |
MAX3243IDWRG4 28-soic Diamant Konfigurasi Panduan
Konfigurasi pin untuk MAX3243IDWRG4 (28-soic pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk MAX3243IDWRG4.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MAX3243IDWRG4 cocok untuk 6 aplikasis: Industrial Controller Serial Port, Data Acquisition and Logger Interface, Test and Measurement Instrument, POS Terminal and Peripheral, Portable Battery-Powered Equipment, Multiport Communication Hub.
Industrial Controller Serial Port
The MAX3243IDWRG4 is suitable for adding an RS-232 port to a 3.3 V or 5 V industrial controller because it accepts a 3 V to 5.5 V supply and provides three drivers plus five receivers. The controller can use the drivers for outbound commands and the additional receiver channels for acknowledgment, interlock, or equipment-status lines. Its ±15 kV HBM ESD protection improves interface robustness at an accessible connector, while the -40 °C to +85 °C rating supports industrial environments. Design the charge-pump and bypass capacitor network around the device pins according to the manufacturer datasheet.
Data Acquisition and Logger Interface
The MAX3243IDWRG4 can connect a data logger or acquisition controller to legacy RS-232 measurement equipment. Its five receiver channels allow the host to collect several status or event signals, while three drivers support command, acknowledgement, and configuration paths. Operating from 3 V to 5.5 V supports modern embedded controllers, and the ±15 kV HBM ESD rating adds protection to externally routed lines. Keep connector-side traces away from precision analog circuitry and follow the datasheet's capacitor-placement recommendations to minimize noise and unstable startup behavior.
Test and Measurement Instrument
The MAX3243IDWRG4 fits laboratory instruments that need several RS-232 status inputs but fewer outbound channels. A host can drive measurement commands over one of the three driver outputs and read ready, fault, and interlock indications through as many as five receiver inputs. The wide 3 V to 5.5 V supply range accommodates embedded control logic, while the 28-SOIC package supports conventional through-hole and mixed-technology assembly methods. The interface's low 1 µA shutdown supply current is valuable when portable instruments periodically deactivate their serial subsystem.
POS Terminal and Peripheral
The MAX3243IDWRG4 is applicable to point-of-sale terminals, service consoles, and peripheral interfaces that exchange commands and status signals over RS-232. Its three drivers support common service-port functions such as command output, transmit acknowledgment, and handshake signaling, while five receivers can monitor peripheral status lines. The device works with both 3.3 V and 5 V system logic and integrates level shifting in one package. For exposed retail or public-access equipment, combine the device's ±15 kV HBM protection with a sound enclosure, grounding strategy, and appropriately selected connector hardware.
Portable Battery-Powered Equipment
The MAX3243IDWRG4 can serve in portable or intermittently connected equipment because its shutdown supply current is 1 µA. A controller can disable the RS-232 interface when no cable is attached and re-enable it for data exchange, reducing standby consumption. Its 3 V minimum supply allows operation from a 3.3 V system rail, and its -40 °C to +85 °C range supports varied operating environments. Confirm shutdown timing, capacitor discharge behavior, and host software control sequence using the manufacturer application guidance before relying on the low-power state.
Multiport Communication Hub
The MAX3243IDWRG4 can serve as the interface element in a multiport communications hub where one controller must communicate with several RS-232 devices. Three transmitter channels can support separate outbound links, and five receiver channels provide additional incoming status paths within one package. Consolidating the interface reduces board area compared with using separate single-channel transceivers. The 28-SOIC footprint remains easy to inspect and assemble, while integrated charge-pump circuitry simplifies the external network. Engineers should still account for channel-specific enable states, connector isolation, and signal-return requirements during system implementation.
Data referensi engineering untuk MAX3243IDWRG4 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini |
|---|---|
| Product Type | Multichannel RS-232 line driver/receiver |
| Package | 28-SOIC |
| Brand | Texas Instruments |
| Supply Voltage Range | 3 V to 5.5 V |
| Driver Channels | 3 |
| Receiver Channels | 5 |
| ESD Protection | ±15 kV HBM |
| Shutdown Supply Current | 1 µA |
| Operating Temperature Range | -40 °C to +85 °C |
| Interface Technology | RS-232 with CMOS logic |
Diferensiator Kunci
- Five receiver channels support more incoming status signals (vsMAX3243EEUI+T)
- Integrated ±15 kV HBM ESD protection (vsMAX3243EEUI+T)
- Low-power shutdown state for portable designs (vsMAX3243EEUI+T)
Catatan Desain
Place the charge-pump capacitors and required bypass capacitors close to their associated MAX3243IDWRG4 pins, following the manufacturer datasheet schematic and layout guidance. Keep the traces short, preserve the specified ground connections, and avoid routing connector-side RS-232 signals beneath the device. The 28-SOIC footprint leaves limited escape space around adjacent pins, so the component orientation and capacitor placement should be fixed early in the PCB layout.
Separate the exposed connector and RS-232 driver side of the board from sensitive analog, clock, and low-level digital circuits. Route driver outputs as short as practical and use a continuous ground reference where appropriate. External cables can inject ESD and transient energy even though the device has ±15 kV HBM protection, so connector placement, enclosure bonding, and chassis-ground strategy remain important parts of the interface design.
Do not substitute a related MAX3243 ordering code solely because it carries the same family name. Check the 28-SOIC footprint, complete pin description, supply range, channel arrangement, shutdown behavior, and external capacitor requirements against the manufacturer datasheet. In particular, MAX3243EEUI+T uses a different package and is not a direct replacement for a PCB designed around MAX3243IDWRG4.
Treat shutdown control as a coordinated power-management function rather than an ordinary data input. Ensure the host does not enable the interface until its supply and interface signals are valid, and confirm that all external nodes remain within the device's absolute-maximum limits when the transceiver is disabled. The documented 1 µA shutdown supply current is valuable for portable systems, but total system consumption also depends on logic levels and external-network behavior.
Informasi Konformitas
The available manufacturer and distributor information does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for this ordering code. Automotive qualification is not indicated.