Texas Instruments

MAX3243IDWRG4 - 3.3V/5V RS-232 IC | Texas Instruments

料号: MAX3243IDWRG4 ✓ 量产中
3 V to 5.5 V Vdss 1 µA Id 28-SOIC Package
最小起订量: 1 |

MAX3243IDWRG4 概述

The Texas Instruments MAX3243IDWRG4 is a multichannel RS-232 line driver and receiver with a 3 V to 5.5 V supply range, three driver channels, five receiver channels, and ±15 kV ESD protection in a 28-pin SOIC package. It combines bidirectional RS-232 interface capability with CMOS-compatible logic and low-power shutdown behavior for industrial equipment, data acquisition systems, and service-port designs.

An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and equipment using the RS-232 standard. A line driver translates host-side digital signals into RS-232 levels, while a receiver converts the bipolar serial signal back into a digital level. Within the interface hierarchy, the MAX3243IDWRG4 belongs to the RS-232 transceiver class of multi-channel interface ICs used to bridge TTL, CMOS, and serial equipment.

The device operates from 3 V to 5.5 V, allowing use with both 3.3 V and 5 V systems. It provides three RS-232 drivers and five receivers, making it useful for designs with several communication ports or more receive inputs than transmit outputs. Its ±15 kV human-body-model ESD protection improves robustness at externally accessible connector pins, while its 1 µA shutdown supply current supports power-conscious systems that disable the interface when it is not needed.

The MAX3243 family combines charge-pump voltage generation and CMOS driver and receiver circuitry in one device. Charge-pump circuitry develops the RS-232 level-shift voltage required when the supply cannot directly generate the required output swing. This integrated approach reduces the number of external components compared with discrete RS-232 interface networks and simplifies connections among logic-level controllers and remote serial equipment.

Typical uses include industrial control equipment, instrumentation, data loggers, POS terminals, and computer peripheral connections. The five receiver channels can monitor multiple incoming lines, while the three drivers support outbound RS-232 channels. Systems using the shutdown function can reduce supply consumption when the interface is inactive, although power-management timing must be coordinated with the host controller.

PCB layout should follow the capacitor and charge-pump recommendations in the manufacturer datasheet, particularly regarding input and output bypassing capacitors and placement near the device. Keep the RS-232 connector side physically separated from sensitive logic or analog circuitry where practical, and route high-energy external lines away from low-level signal traces to reduce ESD and surge-related coupling.

This product page combines electrical characteristics, interface-use guidance, package details, and design considerations to support faster component selection. It also distinguishes verified pin-compatible replacement options from alternatives that require a different footprint, helping engineers evaluate a MAX3243IDWRG4 redesign before committing to a PCB change.

直接替换替代料: MAX3243IDWRG4 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MAX3243IDWRG4 (相同外形与封装尺寸) ——差异在于 ESD Protection, Package, Product Type, RoHS Status.

Texas Instruments
ESD Protection: +/-15 kV (HBM) on serial pins
Package: 28-pin SOIC (DW), gull wing, surface mount
Product Type: Multichannel RS-232 line driver and receiver (3/5 transceiver)
对比 MAX3243IDWRG4 →
Texas Instruments
ESD Protection: ±15 kV HBM
对比 MAX3243IDWRG4 →

MAX3243EIDWRG4

✅ 直接替换
Texas Instruments
📦 28-pin SOIC
Multichannel RS-232 line driver and receiver (3/5 transceiver) · 3 V to 5.5 V · 250 kbps · 3 · 5 · +/-15 kV (HBM) on serial pins · TIA/EIA-232-F · 28-pin SOIC (DW), gull wing, surface mount

联系询价

查看数据手册 →

MAX3243CDWE4

✅ 直接替换
📦 28-pin SOIC
Same 28-pin SOIC MAX3243 multichannel RS-232 function; the commercial-grade ordering code has a 70 °C upper temperature rating versus 85 °C for MAX3243IDWRG4.

📋 参考替代料(不在目录中)

MAX3243IDWRG4 规格参数

Product Type Multichannel RS-232 line driver and receiver
Supply Voltage Range 3 V to 5.5 V
Number of Drivers 3
Number of Receivers 5
Interface Technology RS-232
Logic Technology CMOS
ESD Protection ±15 kV HBM
Shutdown Supply Current 1 µA
工作温度范围 -40 °C to +85 °C
封装 28-SOIC
引脚数量 28 pins
安装类型 Surface mount
Channel Configuration 3/5 transceiver
RoHS 状态 unknown
REACH Status unknown

MAX3243IDWRG4 28-soic 引脚配置指南

MAX3243IDWRG4(28-soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MAX3243IDWRG4 的 28-soic 封装引脚图

暂无详细引脚数据: MAX3243IDWRG4.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MAX3243IDWRG4 适用于 6 应用s: Industrial Controller Serial Port, Data Acquisition and Logger Interface, Test and Measurement Instrument, POS Terminal and Peripheral, Portable Battery-Powered Equipment, Multiport Communication Hub.

🏭

Industrial Controller Serial Port

The MAX3243IDWRG4 is suitable for adding an RS-232 port to a 3.3 V or 5 V industrial controller because it accepts a 3 V to 5.5 V supply and provides three drivers plus five receivers. The controller can use the drivers for outbound commands and the additional receiver channels for acknowledgment, interlock, or equipment-status lines. Its ±15 kV HBM ESD protection improves interface robustness at an accessible connector, while the -40 °C to +85 °C rating supports industrial environments. Design the charge-pump and bypass capacitor network around the device pins according to the manufacturer datasheet.

📟

Data Acquisition and Logger Interface

The MAX3243IDWRG4 can connect a data logger or acquisition controller to legacy RS-232 measurement equipment. Its five receiver channels allow the host to collect several status or event signals, while three drivers support command, acknowledgement, and configuration paths. Operating from 3 V to 5.5 V supports modern embedded controllers, and the ±15 kV HBM ESD rating adds protection to externally routed lines. Keep connector-side traces away from precision analog circuitry and follow the datasheet's capacitor-placement recommendations to minimize noise and unstable startup behavior.

🔧

Test and Measurement Instrument

The MAX3243IDWRG4 fits laboratory instruments that need several RS-232 status inputs but fewer outbound channels. A host can drive measurement commands over one of the three driver outputs and read ready, fault, and interlock indications through as many as five receiver inputs. The wide 3 V to 5.5 V supply range accommodates embedded control logic, while the 28-SOIC package supports conventional through-hole and mixed-technology assembly methods. The interface's low 1 µA shutdown supply current is valuable when portable instruments periodically deactivate their serial subsystem.

🖥️

POS Terminal and Peripheral

The MAX3243IDWRG4 is applicable to point-of-sale terminals, service consoles, and peripheral interfaces that exchange commands and status signals over RS-232. Its three drivers support common service-port functions such as command output, transmit acknowledgment, and handshake signaling, while five receivers can monitor peripheral status lines. The device works with both 3.3 V and 5 V system logic and integrates level shifting in one package. For exposed retail or public-access equipment, combine the device's ±15 kV HBM protection with a sound enclosure, grounding strategy, and appropriately selected connector hardware.

🔋

Portable Battery-Powered Equipment

The MAX3243IDWRG4 can serve in portable or intermittently connected equipment because its shutdown supply current is 1 µA. A controller can disable the RS-232 interface when no cable is attached and re-enable it for data exchange, reducing standby consumption. Its 3 V minimum supply allows operation from a 3.3 V system rail, and its -40 °C to +85 °C range supports varied operating environments. Confirm shutdown timing, capacitor discharge behavior, and host software control sequence using the manufacturer application guidance before relying on the low-power state.

🌐

Multiport Communication Hub

The MAX3243IDWRG4 can serve as the interface element in a multiport communications hub where one controller must communicate with several RS-232 devices. Three transmitter channels can support separate outbound links, and five receiver channels provide additional incoming status paths within one package. Consolidating the interface reduces board area compared with using separate single-channel transceivers. The 28-SOIC footprint remains easy to inspect and assemble, while integrated charge-pump circuitry simplifies the external network. Engineers should still account for channel-specific enable states, connector isolation, and signal-return requirements during system implementation.

What is the MAX3243IDWRG4?
The MAX3243IDWRG4 is a 3 V to 5.5 V multichannel RS-232 transceiver containing three line drivers and five line receivers in a 28-pin SOIC package. According to the Texas Instruments MAX3243 datasheet, it also provides ±15 kV human-body-model ESD protection. The device is intended for connecting CMOS or TTL-level controller logic to RS-232 equipment, including industrial controllers, instruments, and data-acquisition systems.
What is the operating voltage of MAX3243IDWRG4?
The MAX3243IDWRG4 operates from 3 V to 5.5 V, making it suitable for both 3.3 V and 5 V interface electronics. According to the Texas Instruments MAX3243 datasheet, this range supports modern controller platforms while retaining compatibility with conventional 5 V logic systems. The selected supply voltage must also satisfy the device's logic-threshold and power requirements throughout the complete system operating range.
How many RS-232 channels does MAX3243IDWRG4 have?
The MAX3243IDWRG4 has three RS-232 line drivers and five RS-232 line receivers, giving it a 3/5 transceiver configuration. According to the Texas Instruments MAX3243 datasheet, the extra receive channels support multiple incoming status or control signals without requiring additional receiver packages. This is useful in control panels and test equipment where several remote lines must be monitored.
What ESD protection does MAX3243IDWRG4 provide?
The MAX3243IDWRG4 provides ±15 kV human-body-model ESD protection on its RS-232 interface lines. According to the Texas Instruments MAX3243 datasheet, this rating strengthens the interface against electrostatic discharge encountered during human contact with an external connector. It does not replace a complete surge-protection strategy, so cable length, grounding, and connector selection still require engineering review.
Where can I download the MAX3243IDWRG4 datasheet PDF?
The official MAX3243IDWRG4 datasheet PDF is available from Texas Instruments at the product's manufacturer datasheet link on this page. It covers the electrical characteristics, RS-232 interface behavior, shutdown operation, capacitor requirements, package information, and recommended application circuits. Use the manufacturer document for final pin assignments and layout values because those details govern the correctness of any new PCB design.
Where can I find the MAX3243IDWRG4 pinout?
The MAX3243IDWRG4 pinout is defined in the pin-description and package-drawing sections of the Texas Instruments MAX3243 datasheet. The device has 28 pins in the 28-SOIC package, including driver outputs, receiver inputs, supply pins, ground pins, charge-pump capacitors, and shutdown-control connections. Assign every PCB track from the manufacturer pin-description table and verify the selected ordering code against the package drawing.
Where can I buy MAX3243IDWRG4 online?
Use the Request a Quote form on this page to request MAX3243IDWRG4 availability, current pricing, and order details. The form allows an engineer to obtain a current quotation for the exact Texas Instruments ordering code without relying on an outdated marketplace listing. Confirm the requested package, reel configuration, quantity, and target delivery date before placing the order.
What is the price of MAX3243IDWRG4?
Current MAX3243IDWRG4 pricing is generated through the Request a Quote form on this page rather than embedded as a static price. The form can return the current unit and volume-break terms for the exact MPN. Buyers should include their required quantity, packaging preference, and destination so the returned quotation reflects the appropriate commercial configuration.
What is the lead time for MAX3243IDWRG4?
The current MAX3243IDWRG4 lead time depends on supplier inventory, order quantity, and the exact reel or tube configuration. Request the latest lead time through the Request a Quote form on this page. For production planning, include the required delivery date and approved quantity in the request, and treat the returned schedule as the basis for material planning.
Is MAX3243IDWRG4 in stock?
Use the Request a Quote form on this page to check the current availability of MAX3243IDWRG4 for the requested quantity. Stock status can change with market activity and packaging configuration, so an availability response should be confirmed during order entry. The form should be used for the exact MAX3243IDWRG4 ordering code rather than a related MAX3243 package variant.
MAX3243IDWRG4 vs MAX3243EEUI+T - which is better for an RS-232 design?
MAX3243IDWRG4 is the stronger choice when the PCB footprint is specifically designed around a 28-SOIC package. The comparison identifies MAX3243EEUI+T as a different-package alternative, so it is not a pin-for-pin replacement for a 28-SOIC layout. According to the Texas Instruments MAX3243 datasheet and the package information associated with MAX3243EEUI+T, footprint differences require board-level review before substitution.
What is the difference between MAX3243IDWRG4 and MAX3243EEUI+T?
The principal documented difference is package construction: MAX3243IDWRG4 uses a 28-SOIC package, while MAX3243EEUI+T is associated with a smaller, different package. Their shared MAX3243 family function does not make them pin-compatible because land patterns and pad assignments differ. Use MAX3243IDWRG4 for a 28-SOIC board and redesign the placement and routing when moving to the MAX3243EEUI+T footprint.
When should I choose MAX3243IDWRG4 over another RS-232 transceiver?
Choose MAX3243IDWRG4 when the design needs a 3 V to 5.5 V RS-232 interface with three transmit channels, five receive channels, ±15 kV HBM ESD protection, and a 28-SOIC footprint. According to the Texas Instruments MAX3243 datasheet, these functions suit systems that monitor several incoming control lines while driving fewer outputs. Verify that the 28-SOIC pinout matches the existing PCB before selecting it as a replacement.
Is MAX3243IDWRG4 suitable for a 3.3 V industrial controller?
The MAX3243IDWRG4 is suitable for a 3.3 V controller because its documented supply range is 3 V to 5.5 V and its interface technology is CMOS. The Texas Instruments MAX3243 datasheet also specifies an operating range of -40 °C to +85 °C for this ordering code. Confirm signal thresholds, external capacitor values, grounding, and ESD strategy against the complete controller design.
What can replace MAX3243IDWRG4?
No independently verified, same-package, pin-to-pin drop-in replacement for MAX3243IDWRG4 is established in the available cross-reference results. MAX3243EEUI+T is functionally related but uses a different package, so it cannot replace the target without PCB changes. For a drop-in substitution, use the manufacturer cross-reference search and confirm package, pinout, supply voltage, channel count, ESD rating, and shutdown behavior before approving a change.

工程参考数据: MAX3243IDWRG4 ——对比、设计指导和合规信息。

选型指南

Choose MAX3243IDWRG4 for a new or existing 28-SOIC PCB that requires three RS-232 transmit channels, five receive channels, operation from 3 V to 5.5 V, and ±15 kV HBM ESD protection. It is particularly useful where several incoming equipment-status signals must be monitored from one package. The documented -40 °C to +85 °C operating range also makes it appropriate for industrial equipment. Do not select the related MAX3243EEUI+T as a drop-in replacement because its package differs and the PCB footprint must be redesigned. For any other proposed substitute, confirm pin assignments, logic thresholds, external capacitor requirements, channel configuration, shutdown polarity, and ESD rating. If a verified same-footprint source is unavailable, changing the PCB to use a documented alternative is safer than assuming that all members of the MAX3243 family are interchangeable.

与替代料对比

参数 本产品
Product Type Multichannel RS-232 line driver/receiver
Package 28-SOIC
Brand Texas Instruments
Supply Voltage Range 3 V to 5.5 V
Driver Channels 3
Receiver Channels 5
ESD Protection ±15 kV HBM
Shutdown Supply Current 1 µA
Operating Temperature Range -40 °C to +85 °C
Interface Technology RS-232 with CMOS logic

关键差异点

  • Five receiver channels support more incoming status signals (对比 MAX3243EEUI+T)
  • Integrated ±15 kV HBM ESD protection (对比 MAX3243EEUI+T)
  • Low-power shutdown state for portable designs (对比 MAX3243EEUI+T)

设计说明

Place the charge-pump capacitors and required bypass capacitors close to their associated MAX3243IDWRG4 pins, following the manufacturer datasheet schematic and layout guidance. Keep the traces short, preserve the specified ground connections, and avoid routing connector-side RS-232 signals beneath the device. The 28-SOIC footprint leaves limited escape space around adjacent pins, so the component orientation and capacitor placement should be fixed early in the PCB layout.

Separate the exposed connector and RS-232 driver side of the board from sensitive analog, clock, and low-level digital circuits. Route driver outputs as short as practical and use a continuous ground reference where appropriate. External cables can inject ESD and transient energy even though the device has ±15 kV HBM protection, so connector placement, enclosure bonding, and chassis-ground strategy remain important parts of the interface design.

Do not substitute a related MAX3243 ordering code solely because it carries the same family name. Check the 28-SOIC footprint, complete pin description, supply range, channel arrangement, shutdown behavior, and external capacitor requirements against the manufacturer datasheet. In particular, MAX3243EEUI+T uses a different package and is not a direct replacement for a PCB designed around MAX3243IDWRG4.

Treat shutdown control as a coordinated power-management function rather than an ordinary data input. Ensure the host does not enable the interface until its supply and interface signals are valid, and confirm that all external nodes remain within the device's absolute-maximum limits when the transceiver is disabled. The documented 1 µA shutdown supply current is valuable for portable systems, but total system consumption also depends on logic levels and external-network behavior.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The available manufacturer and distributor information does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for this ordering code. Automotive qualification is not indicated.

数据核验日期: 2026-11-09 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MAX3243IDWRG4 datasheet MAX3243IDWRG4 pinout MAX3243IDWRG4 datasheet pdf MAX3243IDWRG4 specifications MAX3243IDWRG4 28 SOIC MAX3243IDWRG4 replacement MAX3243IDWRG4 equivalent MAX3243IDWRG4 cross reference MAX3243IDWRG4 vs MAX3243EEUI+T Texas Instruments MAX3243IDWRG4 MAX3243IDWRG4 price MAX3243IDWRG4 stock MAX3243IDWRG4 application circuit MAX3243IDWRG4 RS-232 interface

相关元器件 & 术语

Texas Instruments MAX3243IDWRG4 MAX3243EEUI+T MAX3243 RS-232 RS-232 transceiver line driver line receiver multichannel interface IC CMOS TTL 3.3 V logic 5 V logic charge-pump voltage generation ESD protection human body model 28-SOIC SOIC package family surface-mount package industrial control data acquisition test and measurement shutdown supply current RS-232 interface
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情