Analog Devices

MAX3384ECAP - 250kbps ESD-Protected RS-232 | Analog Devices

MPN: MAX3384ECAP ✓ Aktif
3.0V to 5.5V Vdss 20-pin SSOP Package
MOQ: 1 |

MAX3384ECAP Ringkasan

Analog Devices MAX3384ECAP is a low-power true RS-232 transceiver with two transmitters and two receivers, operating from a 3.0V to 5.5V single supply and supporting data rates up to 250kbps. Every transmitter output and receiver input provides electrostatic-discharge protection to ±15kV. The device is packaged in a 20-pin SSOP with a 0.65mm pitch.

A true RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and differential bipolar RS-232 signals. It belongs to the broader communication-interface hierarchy: RS-232 transceiver → line driver and receiver → interface IC → semiconductor. The MAX3384ECAP combines transmit and receive functions in one package, allowing a compact design to bridge a modern controller or microcontroller with a legacy RS-232 link.

The 3.0V to 5.5V operating range supports both 3.3V and 5V digital systems while avoiding the higher supply requirement associated with some older RS-232 devices. Its operation up to 250kbps makes it suitable for data acquisition, industrial control, point-of-sale equipment, and embedded systems that transfer more information than a low-speed serial link. The integrated ±15kV ESD protection strengthens the external interface against electrostatic discharge events.

The MAX3384ECAP provides two transmit channels and two receive channels in a single 20-pin SSOP. This channel density allows one transceiver to serve two independent RS-232 directions or multiple device connections. A 3.3V-compatible supply range also simplifies mixed-voltage designs in which the controller core operates below 5V, while the RS-232 interface remains powered from the same rail.

Typical applications include industrial serial controllers, point-of-sale terminals, access-control equipment, security systems, laboratory instruments, and embedded data-collection systems. The combination of four I/O channels, a 250kbps maximum signaling rate, low-power operation, and ±15kV interface protection addresses designs that require compact integration without the supply voltage of a legacy 5V-only RS-232 implementation.

Designers should pay attention to the device's 0.65mm-pitch SSOP footprint and verify every signal and power connection against the manufacturer pin-description table before layout release. Keep the RS-232 connector-side traces away from sensitive logic where practical, and provide the external charge-pump and interface components specified by the manufacturer datasheet for the selected operating configuration.

This product overview combines the MAX3384ECAP's principal electrical, packaging, protection, and interface characteristics with pin-compatible replacement guidance and practical PCB considerations. It supports faster component selection by separating application fit, channel requirements, supply compatibility, and package constraints into directly comparable engineering factors.

Alternatif penggantian untuk MAX3384ECAP — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MAX3384ECAP (sama faktor bentuk dan footprint) — berbeda di dalam Device Type.

Analog Devices
Device Type: Transceiver
Bandingkan dengan MAX3384ECAP →

MAX3384ECWN+

✅ Drop-In
Analog Devices
📦 20-pin SSOP
RS-232 · Transceiver · 2/2 · 3.0V to 5.5V · 250kbps · 2 · 2 · EIA/TIA-232 and V.28/V.24

Kontak untuk harga

Lihat Datasheet →

ST3384EBPR

✅ Drop-In
📦 20-pin SSOP
Same 20-pin SSOP construction, 5.5V maximum rating, and 250kbps data rate; the MAX3384ECAP specifies a 3.0V minimum supply and ±15kV ESD protection.

📋 Alternatif referensi (tidak dalam katalog)

MAX3384ECAP Spesifikasi

Device Type 2/2 transceiver, full RS-232
Number of Transmitters 2 channels
Number of Receivers 2 channels
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 250kbps
Transmitter and Receiver ESD Protection ±15kV
Interface Standard EIA/TIA-232
Supported Signaling V.28 and V.24
Rentang Suhu Kerja 0°C to 70°C
Temperature Grade Commercial
Paket 20-pin SSOP
Package Pitch 0.65mm
Package Length 5.30mm
Terminal Form Gull wing
Tipe Mounting Surface mount
Jumlah Pin 20 pins

MAX3384ECAP 5.30mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk MAX3384ECAP (5.30mm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 5.30mm untuk MAX3384ECAP

Tidak ada data diatribut pin yang tersedia untuk MAX3384ECAP.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MAX3384ECAP cocok untuk 6 aplikasis: Industrial Serial Controllers, Point-of-Sale Terminals, Access-Control and Security Systems, Security Camera Control Interfaces, Laboratory and Test Equipment, Embedded Data-Acquisition Systems.

🏭

Industrial Serial Controllers

The MAX3384ECAP fits industrial serial controllers that exchange data with legacy RS-232 equipment from a 3.3V or 5V controller platform. Its 3.0V-to-5.5V operating range avoids requiring a separate 5V-only transceiver supply, while two transmitters and two receivers support bidirectional communication. Operation up to 250kbps permits faster data transfer than conventional low-speed serial links. The stated ±15kV ESD protection on transmitter outputs and receiver inputs is particularly relevant when the interface reaches an external enclosure or service connector through exposed wiring.

🏭

Point-of-Sale Terminals

The MAX3384ECAP is appropriate for point-of-sale terminals requiring a compact interface to printers, scanners, customer displays, or payment peripherals that use RS-232. The two transmit and two receive channels can consolidate several low-speed peripheral links into one 20-pin SSOP device. Its 3.3V-compatible supply range supports integration with modern embedded controllers, and the 250kbps maximum rate provides more throughput than many legacy peripheral ports require. ±15kV ESD protection adds an important interface safeguard for equipment that may be connected or disconnected during installation and servicing.

🔒

Access-Control and Security Systems

The MAX3384ECAP can bridge a security controller to RS-232 door-access units, badge readers, alarm interfaces, and configuration tools. Two receive channels allow status information from two peripherals, while two transmit channels can support command paths. The 3.0V-to-5.5V supply range simplifies operation alongside embedded 3.3V logic, and the commercial 0°C-to-70°C specification fits many indoor environmental installations. The ±15kV interface protection rating is useful for exposed cable-connected equipment, although cable routing and enclosure grounding still require careful implementation.

🎥

Security Camera Control Interfaces

The MAX3384ECAP is suitable for control-only or bidirectional RS-232 links associated with cameras, pan-tilt units, access-control hardware, and video-system peripherals. The 250kbps ceiling supports configuration commands and compact status traffic without imposing a high-bandwidth burden on the transceiver. Operating from 3.0V to 5.5V allows the interface to operate alongside low-voltage camera-control processors. Its integrated ±15kV ESD protection on all transmitter outputs and receiver inputs improves robustness at external cable interfaces, although surge, ground-loop, and long-cable behavior must be evaluated separately.

🔧

Laboratory and Test Equipment

The MAX3384ECAP can provide a compact legacy-computer interface in laboratory instruments, automated test systems, and service equipment. Its 2/2 channel arrangement supports simultaneous command transmission and response reception, while the 250kbps maximum rate accommodates measurement data and configuration sequences. The 3.0V-to-5.5V supply range permits operation from either 3.3V or 5V system rails. The stated ±15kV ESD protection is useful for bench and service connections, while the 20-pin SSOP package helps limit board area where instrument front-end and controller sections are densely packed.

📡

Embedded Data-Acquisition Systems

The MAX3384ECAP is a practical interface for embedded data-acquisition and environmental-monitoring controllers that communicate with external instruments over RS-232. Two receiver channels can collect status or measurement acknowledgments from separate devices, and two transmitter channels can address them. The device operates from 3.0V to 5.5V and supports rates up to 250kbps, matching many legacy laboratory and industrial sensors. Its 20-pin SSOP format reduces board footprint, while ±15kV ESD protection strengthens the path to field-wired connectors. Long cable runs still require appropriate signal-integrity and grounding measures.

Ringkasan Produk Direkomendasikan

ST3384EBPR Package-compatible RS-232 transceiver alternative Digunakan di dalam: Industrial Serial Controllers, Point-of-Sale Terminals, Access-Control and Security Systems, Security Camera Control Interfaces, Laboratory and Test Equipment, Embedded Data-Acquisition Systems MAX3384ECWN+ Analog Devices Digunakan di dalam: Industrial Serial Controllers, Point-of-Sale Terminals, Access-Control and Security Systems, Security Camera Control Interfaces, Laboratory and Test Equipment, Embedded Data-Acquisition Systems
Where can I buy MAX3384ECAP online?
The MAX3384ECAP can be requested through the Request a Quote form on this page for current commercial availability, lot traceability, and shipment details. The part is a 20-pin SSOP RS-232 transceiver from Analog Devices, and requests should identify the MAX3384ECAP ordering code rather than a generic MAX3384E variant. Submit the required quantity, target delivery date, and acceptable packaging details with the request.
What is the price of MAX3384ECAP?
Current pricing for the MAX3384ECAP is obtained through the Request a Quote form on this page. The quote request should specify the quantity, required shipment date, and whether reel or tray packaging is acceptable. This avoids presenting a transient commercial figure that may not match the requested volume. The device itself is a 3.0V-to-5.5V, 250kbps RS-232 transceiver in a 20-pin SSOP package.
What is the lead time for MAX3384ECAP?
The current lead time for MAX3384ECAP should be requested through the Request a Quote form on this page. Include the required quantity, production schedule, authorized sourcing status, and target destination so the commercial response can reflect the appropriate supply channel. The MAX3384ECAP is identified as a commercial-grade, 20-pin SSOP device with a 0°C-to-70°C operating-temperature range.
Is MAX3384ECAP in stock?
Use the Request a Quote form on this page to request current stock confirmation for MAX3384ECAP. Availability depends on quantity, lot status, packaging configuration, and shipment destination. The verified product identity is the Analog Devices MAX3384ECAP in a 20-pin SSOP package; the request should use that complete ordering code to prevent confusion with other MAX3384E temperature or packaging variants.
What is the difference between MAX3384ECAP and ST3384EBPR?
The MAX3384ECAP and ST3384EBPR are identified as complete, package-compatible replacements with consistent terminals and characteristics. Both are 20-pin SSOP RS-232 transceivers rated for operation to 5.5V and 250kbps. According to the manufacturer information for the MAX3384E family, the MAX3384ECAP also provides ±15kV ESD protection on transmitter outputs and receiver inputs. Verify the complete pin and electrical specifications before substitution.
MAX3384ECAP vs MAX3384ECWN+ - which is better for a 250kbps link?
Both parts are identified as 20-pin SSOP devices supporting operation to 5.5V and 250kbps, with consistent terminals and package characteristics. The MAX3384ECAP has an explicitly stated 3.0V-to-5.5V supply range and ±15kV ESD protection. The MAX3384ECWN+ may therefore be considered when the complete ordering code matches the mechanical and qualification requirements of the target assembly. A final choice should include temperature-grade and lifecycle confirmation.
When should I choose MAX3384ECAP over another RS-232 transceiver?
Choose the MAX3384ECAP when a design requires two transmit channels, two receive channels, a 3.0V-to-5.5V supply range, and data rates up to 250kbps. The 20-pin SSOP format also supports compact assemblies where a larger package would be inconvenient. Compared with the ST3384EBPR, the explicit ±15kV ESD-protection specification is a useful differentiator, but the complete pinout and operating requirements must still be checked.
Is MAX3384ECAP suitable for an industrial RS-232 controller?
The MAX3384ECAP is suitable for a commercial-temperature industrial controller when its 0°C-to-70°C range covers the operating environment. Its 3.0V-to-5.5V supply range supports 3.3V and 5V logic systems, while ±15kV ESD protection strengthens the external connector interface. If the enclosure is exposed to temperatures outside the specified range or requires automotive qualification, select a device rated for those conditions instead.
What is the best drop-in replacement for MAX3384ECAP?
The MAX3384ECWN+ is the closest same-manufacturer drop-in candidate because comparison information identifies consistent terminals, package characteristics, 5.5V operation, and 250kbps performance. The ST3384EBPR is a documented cross-brand alternative with the same 20-pin SSOP format and 250kbps rating. According to the comparison information, both are complete replacements, but engineers should verify pin functions, temperature grade, ESD rating, and qualification status against the manufacturer datasheets.
Can ST3384EBPR replace MAX3384ECAP?
Yes, ST3384EBPR is identified as a complete replacement for MAX3384ECAP because its terminals and package are consistent and its key communication ratings align at 5.5V and 250kbps. The MAX3384ECAP additionally has a stated 3.0V minimum supply and ±15kV ESD protection. Before replacing the component, compare those limits, operating temperature, enable or shutdown behavior, and every external component shown in the respective datasheets.
What can replace MAX3384ECAP in a 20-pin SSOP design?
Two documented 20-pin SSOP candidates are MAX3384ECWN+ and ST3384EBPR. The MAX3384ECWN+ preserves the MAX3384E family and is listed as a complete replacement, while the ST3384EBPR is a cross-brand complete replacement with matching 20-pin SSOP construction and 250kbps capability. These are engineering alternatives rather than stocking variants. Confirm pin-level compatibility, supply limits, ESD performance, temperature grade, and lifecycle status for the exact assembly.
Is MAX3384ECAP the same as ST3384EBPR?
The MAX3384ECAP and ST3384EBPR are not the same manufacturer or ordering code, but they are identified as complete, package-compatible substitutes. Both are 20-pin SSOP RS-232 transceivers with 5.5V and 250kbps key ratings. The MAX3384ECAP specification additionally identifies a 3.0V minimum supply and ±15kV ESD protection, so engineers should not equate the parts without checking the complete operating and protection specifications.
Where can I download the MAX3384ECAP datasheet PDF?
The official MAX3384ECAP information is available through the Analog Devices MAX3384E product page at https://www.analog.com/en/products/max3384e.html. The product page provides the manufacturer’s documentation and electrical characteristics for the MAX3384E family. Use the pin-description table, electrical characteristics, and typical application information to confirm the MAX3384ECAP ordering code before releasing a PCB footprint or approving a substitute.
Where can I find the MAX3384ECAP pinout?
Use the pin-description table in the Analog Devices MAX3384E manufacturer datasheet for the authoritative MAX3384ECAP pinout and external connections. The target device is a 20-pin SSOP with 0.65mm pitch, so the PCB footprint must provide 20 gull-wing terminals at the manufacturer-defined spacing and length. Assign signals by named pin function rather than relying only on package orientation, and verify every supply, ground, driver, receiver, and charge-pump connection before fabrication.
What are the key specifications of MAX3384ECAP that engineers should know?
The MAX3384ECAP is a 2-transmitter, 2-receiver true RS-232 interface IC with a 3.0V-to-5.5V supply range, operation up to 250kbps, and ±15kV ESD protection on transmitter outputs and receiver inputs. It is a commercial-temperature device rated from 0°C to 70°C in a 20-pin SSOP package with 0.65mm pitch. These parameters define its suitability for compact 3.3V or 5V systems requiring four RS-232 I/O channels.

Data referensi engineering untuk MAX3384ECAP — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MAX3384ECAP for compact 3.3V or 5V systems that need two RS-232 transmit channels, two receive channels, operation up to 250kbps, and a stated ±15kV ESD-protection rating. Its 20-pin SSOP package is particularly useful when board area is constrained. Consider MAX3384ECWN+ when maintaining the MAX3384E family is preferred and the complete ordering-code, temperature, and lifecycle requirements are acceptable. Consider ST3384EBPR when a cross-brand complete replacement is needed; it has the same 20-pin SSOP construction and 250kbps class. Before selecting any substitute, compare pin functions, supply limits, temperature range, ESD rating, external component requirements, and qualification requirements. If the assembly operates outside 0°C to 70°C, choose a device explicitly rated for the wider environment.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MAX3384ECWN+ ST3384EBPR
Brand Analog Devices Maxim Integrated STMicroelectronics
Package 20-pin SSOP SSOP 20Pin SSOP 20Pin
Maximum Data Rate 250kbps 250kbps 250kbps
Maximum Supply Voltage 5.5V 5.5V 5.5V
Interface Configuration 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver
Pin Count 20 pins 20 pins 20 pins
Interface Standards EIA/TIA-232, V.28 and V.24 RS-232 RS-232

Diferensiator Kunci

  • Lower minimum operating supply (vsST3384EBPR)
  • Defined high-level ESD protection (vsST3384EBPR)
  • Four-channel integration in the target package (vsMAX3384ECWN+)

Catatan Desain

Confirm the MAX3384ECAP footprint against the manufacturer package drawing before routing. The component uses a 20-pin SSOP with 0.65mm pitch and gull-wing terminals. Place the device close to the RS-232 connector path so external cable-side routing remains short, while separating connector-side traces from sensitive logic and clocks. Use a ground reference and return-path strategy appropriate to the PCB stack-up and follow the manufacturer layout guidance for the external interface network.

Do not substitute the device solely because another part is labeled a 2/2 RS-232 transceiver. MAX3384ECAP and MAX3384ECWN+ share the 20-pin SSOP format and 250kbps rating, while ST3384EBPR is identified as a complete cross-brand replacement. Before substitution, verify every pin function, the 3.0V-to-5.5V supply requirement, ±15kV ESD rating, operating-temperature range, and all manufacturer-specified external components. This prevents a package-compatible part from introducing different startup, shutdown, or interface-network requirements.

Treat the RS-232 connector and cable interface as an electrically harsh environment even though the logic side operates from 3.0V to 5.5V. Route transmitter outputs and receiver inputs toward the connector, preserve the recommended return path, and keep switching nodes away from receiver traces where practical. The ±15kV ESD rating is an important protection feature, but it does not replace correct connector grounding, cable selection, enclosure design, and external transient-control components.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The MAX3384ECAP is a commercial-temperature RS-232 interface IC. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or a declaration for the exact ordering code.

Data disahkan pada: 2026-11-09 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

MAX3384ECAP datasheet MAX3384ECAP pinout MAX3384ECAP datasheet pdf MAX3384ECAP specifications MAX3384ECAP SSOP-20 footprint MAX3384ECAP 250kbps RS-232 MAX3384ECAP application circuit MAX3384ECAP equivalent MAX3384ECAP replacement MAX3384ECAP vs ST3384EBPR MAX3384ECAP price MAX3384ECAP stock

Komponen dan Istilah Terkait

Analog Devices MAX3384ECAP MAX3384E MAX3384ECWN+ ST3384EBPR Maxim Integrated STMicroelectronics RS-232 transceiver EIA/TIA-232 V.28 V.24 line transceiver interface IC semiconductor ESD protection 20-pin SSOP SSOP package family surface mount SMD 250kbps data rate 3.0V to 5.5V supply industrial serial communication point-of-sale terminal security system embedded data acquisition
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ