MAX3384ECAP - 250kbps ESD-Protected RS-232 | Analog Devices
部品番号: MAX3384ECAP ✓ 生産中MAX3384ECAP 概要
A true RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and differential bipolar RS-232 signals. It belongs to the broader communication-interface hierarchy: RS-232 transceiver → line driver and receiver → interface IC → semiconductor. The MAX3384ECAP combines transmit and receive functions in one package, allowing a compact design to bridge a modern controller or microcontroller with a legacy RS-232 link.
The 3.0V to 5.5V operating range supports both 3.3V and 5V digital systems while avoiding the higher supply requirement associated with some older RS-232 devices. Its operation up to 250kbps makes it suitable for data acquisition, industrial control, point-of-sale equipment, and embedded systems that transfer more information than a low-speed serial link. The integrated ±15kV ESD protection strengthens the external interface against electrostatic discharge events.
The MAX3384ECAP provides two transmit channels and two receive channels in a single 20-pin SSOP. This channel density allows one transceiver to serve two independent RS-232 directions or multiple device connections. A 3.3V-compatible supply range also simplifies mixed-voltage designs in which the controller core operates below 5V, while the RS-232 interface remains powered from the same rail.
Typical applications include industrial serial controllers, point-of-sale terminals, access-control equipment, security systems, laboratory instruments, and embedded data-collection systems. The combination of four I/O channels, a 250kbps maximum signaling rate, low-power operation, and ±15kV interface protection addresses designs that require compact integration without the supply voltage of a legacy 5V-only RS-232 implementation.
Designers should pay attention to the device's 0.65mm-pitch SSOP footprint and verify every signal and power connection against the manufacturer pin-description table before layout release. Keep the RS-232 connector-side traces away from sensitive logic where practical, and provide the external charge-pump and interface components specified by the manufacturer datasheet for the selected operating configuration.
This product overview combines the MAX3384ECAP's principal electrical, packaging, protection, and interface characteristics with pin-compatible replacement guidance and practical PCB considerations. It supports faster component selection by separating application fit, channel requirements, supply compatibility, and package constraints into directly comparable engineering factors.
ドロップイン代替品: MAX3384ECAP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX3384ECAP (同一形状・フットプリント) — 相違点: Device Type.
MAX3384ECWN+
✅ ドロップイン価格はお問い合わせください
データシートを見る →ST3384EBPR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MAX3384ECAP 仕様
| Device Type | 2/2 transceiver, full RS-232 |
| Number of Transmitters | 2 channels |
| Number of Receivers | 2 channels |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| Transmitter and Receiver ESD Protection | ±15kV |
| Interface Standard | EIA/TIA-232 |
| Supported Signaling | V.28 and V.24 |
| 動作温度範囲 | 0°C to 70°C |
| Temperature Grade | Commercial |
| パッケージ | 20-pin SSOP |
| Package Pitch | 0.65mm |
| Package Length | 5.30mm |
| Terminal Form | Gull wing |
| 実装タイプ | Surface mount |
| ピン数 | 20 pins |
MAX3384ECAP 5.30mm ピン配置ガイド
MAX3384ECAP (5.30mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX3384ECAP.
詳細は データシート をご参照ください。
主な用途
MAX3384ECAP の用途: 6 件s: Industrial Serial Controllers, Point-of-Sale Terminals, Access-Control and Security Systems, Security Camera Control Interfaces, Laboratory and Test Equipment, Embedded Data-Acquisition Systems.
Industrial Serial Controllers
The MAX3384ECAP fits industrial serial controllers that exchange data with legacy RS-232 equipment from a 3.3V or 5V controller platform. Its 3.0V-to-5.5V operating range avoids requiring a separate 5V-only transceiver supply, while two transmitters and two receivers support bidirectional communication. Operation up to 250kbps permits faster data transfer than conventional low-speed serial links. The stated ±15kV ESD protection on transmitter outputs and receiver inputs is particularly relevant when the interface reaches an external enclosure or service connector through exposed wiring.
おすすめ
Point-of-Sale Terminals
The MAX3384ECAP is appropriate for point-of-sale terminals requiring a compact interface to printers, scanners, customer displays, or payment peripherals that use RS-232. The two transmit and two receive channels can consolidate several low-speed peripheral links into one 20-pin SSOP device. Its 3.3V-compatible supply range supports integration with modern embedded controllers, and the 250kbps maximum rate provides more throughput than many legacy peripheral ports require. ±15kV ESD protection adds an important interface safeguard for equipment that may be connected or disconnected during installation and servicing.
おすすめ
Access-Control and Security Systems
The MAX3384ECAP can bridge a security controller to RS-232 door-access units, badge readers, alarm interfaces, and configuration tools. Two receive channels allow status information from two peripherals, while two transmit channels can support command paths. The 3.0V-to-5.5V supply range simplifies operation alongside embedded 3.3V logic, and the commercial 0°C-to-70°C specification fits many indoor environmental installations. The ±15kV interface protection rating is useful for exposed cable-connected equipment, although cable routing and enclosure grounding still require careful implementation.
おすすめ
Security Camera Control Interfaces
The MAX3384ECAP is suitable for control-only or bidirectional RS-232 links associated with cameras, pan-tilt units, access-control hardware, and video-system peripherals. The 250kbps ceiling supports configuration commands and compact status traffic without imposing a high-bandwidth burden on the transceiver. Operating from 3.0V to 5.5V allows the interface to operate alongside low-voltage camera-control processors. Its integrated ±15kV ESD protection on all transmitter outputs and receiver inputs improves robustness at external cable interfaces, although surge, ground-loop, and long-cable behavior must be evaluated separately.
おすすめ
Laboratory and Test Equipment
The MAX3384ECAP can provide a compact legacy-computer interface in laboratory instruments, automated test systems, and service equipment. Its 2/2 channel arrangement supports simultaneous command transmission and response reception, while the 250kbps maximum rate accommodates measurement data and configuration sequences. The 3.0V-to-5.5V supply range permits operation from either 3.3V or 5V system rails. The stated ±15kV ESD protection is useful for bench and service connections, while the 20-pin SSOP package helps limit board area where instrument front-end and controller sections are densely packed.
おすすめ
Embedded Data-Acquisition Systems
The MAX3384ECAP is a practical interface for embedded data-acquisition and environmental-monitoring controllers that communicate with external instruments over RS-232. Two receiver channels can collect status or measurement acknowledgments from separate devices, and two transmitter channels can address them. The device operates from 3.0V to 5.5V and supports rates up to 250kbps, matching many legacy laboratory and industrial sensors. Its 20-pin SSOP format reduces board footprint, while ±15kV ESD protection strengthens the path to field-wired connectors. Long cable runs still require appropriate signal-integrity and grounding measures.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX3384ECAP — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX3384ECWN+ | ST3384EBPR |
|---|---|---|---|
| Brand | Analog Devices | Maxim Integrated | STMicroelectronics |
| Package | 20-pin SSOP | SSOP 20Pin | SSOP 20Pin |
| Maximum Data Rate | 250kbps | 250kbps | 250kbps |
| Maximum Supply Voltage | 5.5V | 5.5V | 5.5V |
| Interface Configuration | 2/2 full RS-232 transceiver | 2/2 full RS-232 transceiver | 2/2 full RS-232 transceiver |
| Pin Count | 20 pins | 20 pins | 20 pins |
| Interface Standards | EIA/TIA-232, V.28 and V.24 | RS-232 | RS-232 |
主な差別化要因
- Lower minimum operating supply (vs ST3384EBPR)
- Defined high-level ESD protection (vs ST3384EBPR)
- Four-channel integration in the target package (vs MAX3384ECWN+)
設計ノート
Confirm the MAX3384ECAP footprint against the manufacturer package drawing before routing. The component uses a 20-pin SSOP with 0.65mm pitch and gull-wing terminals. Place the device close to the RS-232 connector path so external cable-side routing remains short, while separating connector-side traces from sensitive logic and clocks. Use a ground reference and return-path strategy appropriate to the PCB stack-up and follow the manufacturer layout guidance for the external interface network.
Do not substitute the device solely because another part is labeled a 2/2 RS-232 transceiver. MAX3384ECAP and MAX3384ECWN+ share the 20-pin SSOP format and 250kbps rating, while ST3384EBPR is identified as a complete cross-brand replacement. Before substitution, verify every pin function, the 3.0V-to-5.5V supply requirement, ±15kV ESD rating, operating-temperature range, and all manufacturer-specified external components. This prevents a package-compatible part from introducing different startup, shutdown, or interface-network requirements.
Treat the RS-232 connector and cable interface as an electrically harsh environment even though the logic side operates from 3.0V to 5.5V. Route transmitter outputs and receiver inputs toward the connector, preserve the recommended return path, and keep switching nodes away from receiver traces where practical. The ±15kV ESD rating is an important protection feature, but it does not replace correct connector grounding, cable selection, enclosure design, and external transient-control components.
コンプライアンス情報
The MAX3384ECAP is a commercial-temperature RS-232 interface IC. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or a declaration for the exact ordering code.