MC1489AMG - Quad EIA-232D Receiver | onsemi | RS-232
MPN: MC1489AMG ✓ AktifMC1489AMG Ringkasan
A quad line receiver is an interface IC that converts bipolar RS-232 voltage levels into complementary TTL-compatible logic signals. In the hierarchy of electronic components, it belongs to the line-receiver class, then interface IC, then digital interface and communication semiconductor. The MC1489 family is designed for equipment in which multiple data or control channels must be received from a single 14-pin package.
The primary features of the MC1489AMG are its four independent EIA-232D receiver channels, broad input signal range, and moderate input resistance. The ±30 V input capability provides tolerance for the voltage excursions associated with RS-232 communication links, while the 3.0 kΩ to 7.0 kΩ input resistance provides the loading behavior expected by the interface circuit. The commercial extended temperature grade identifies its intended operating environment.
Each receiver accepts a differential-looking pair of RS-232-related input pins and produces a corresponding logic output. Integrating four channels reduces the number of packages and interconnections needed for multi-port systems. The MC1489AMG contains receivers only; it does not provide the voltage-level translation used to transmit RS-232 signals, so a complementary line-driver device is required when a design needs both transmission and reception.
Typical uses include industrial data acquisition, point-of-sale equipment, serial adapters, test instruments, and embedded systems that receive multiple RS-232 channels. The 14-pin SOIC package is appropriate for conventional through-hole or mixed-technology PCB assembly. Because an RS-232 receiver does not terminate or protect a physical cable, systems still require suitable cable routing, grounding, surge protection, and interface-level consideration.
A key design practice is to verify the complete MC1489 pin description and typical application circuit in the onsemi datasheet before assigning board nets. Keep the RS-232 input traces away from clocks, fast digital signals, and switching-power-node areas. Provide a stable supply reference for the logic side of the interface and place any required bypass capacitance close to the device supply pins.
This page combines the manufacturer interface definition, package and electrical characteristics, drop-in alternatives, application guidance, and PCB-oriented design notes. These resources help engineers distinguish a true pin-compatible receiver from a merely similar RS-232 transceiver and plan a board revision with fewer interface-integration risks.
Alternatif penggantian untuk MC1489AMG — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MC1489AMG (sama faktor bentuk dan footprint) — berbeda di dalam Mounting Type, Package, Input Resistance, Function, Package Code.
MC1489NE4
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC1489NG4
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC1489D
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC1489AMG Spesifikasi
| Product Type | Quad line EIA-232D receiver |
| Number of Receiver Channels | 4 channels |
| Input Resistance | 3.0 kΩ to 7.0 kΩ |
| Input Signal Range | ±30 V |
| Interface Standard | EIA-232D |
| Temperature Grade | Commercial extended |
| Package Type | 14-pin SOIC |
| Package Code | SOEIAJ-14 |
| Terminal Count | 14 terminals |
| Tipe Mounting | Surface mount |
| Terminal Form | Gull wing |
Konfigurasi Pin MC1489AMG
| Pin produk 1 | R1IN — Receiver 1 input |
| Pin produk 2 | R1OUT — Receiver 1 output |
| Pin produk 3 | R2IN — Receiver 2 input |
| Pin produk 4 | R2OUT — Receiver 2 output |
| Pin produk 5 | GND — Ground connection |
| Pin produk 6 | R3OUT — Receiver 3 output |
| Pin produk 7 | R3IN — Receiver 3 input |
| Pin produk 8 | R4OUT — Receiver 4 output |
| Pin produk 9 | R4IN — Receiver 4 input |
| Pin produk 10 | VCC — Positive supply connection |
| Pin produk 11 | NC — Not connected |
| Pin produk 12 | NC — Not connected |
| Pin produk 13 | NC — Not connected |
| Pin produk 14 | NC — Not connected |
Aplikasi Umum
MC1489AMG cocok untuk 6 aplikasis: Industrial Data Acquisition, Point-of-Sale Terminal Interface, Serial Adapter and Gateway, Test and Measurement Equipment, Embedded Equipment Controller, Medical and Laboratory Equipment.
Industrial Data Acquisition
The MC1489AMG fits receive-heavy industrial data-acquisition equipment that must decode several EIA-232D signals while saving board space. Its four receiver channels occupy one 14-pin SOIC, and its ±30 V input range accommodates the voltage excursions associated with the interface. Place the receiver close to the connector or protection network, keep sensitive analog and clock routing away from these inputs, and route the four logic outputs toward the controller through an appropriate buffer or isolation boundary.
Direkomendasikan
Point-of-Sale Terminal Interface
Point-of-sale terminals and peripheral controllers commonly receive commands and status information through multiple serial ports. The MC1489AMG provides four EIA-232D receiver channels in one package, allowing one device to serve several incoming ports. Its 3.0 kΩ to 7.0 kΩ input resistance establishes the receiver-side loading, while the ±30 V input specification provides tolerance beyond ordinary logic levels. Place surge protection at the connector and maintain a controlled ground reference between connected equipment.
Direkomendasikan
Serial Adapter and Gateway
The MC1489AMG is suitable for serial gateways that accept multiple legacy RS-232 inputs and translate them into a modern digital bus. Four receiver channels reduce the number of packages needed for legacy connectivity, while the device leaves transmit conversion to a dedicated driver such as MC1488NE4. Keep unprotected cable inputs away from sensitive logic, provide connector-side transient protection, and verify common-mode and ground requirements for every attached RS-232 port.
Direkomendasikan
Test and Measurement Equipment
Instrumentation systems can use the MC1489AMG to receive four control or status channels from an external RS-232 controller. Its four integrated receivers simplify channel allocation, and its ±30 V input range supports the bipolar signal levels encountered on RS-232 lines. Arrange the input network so test fixtures and external cables cannot inject large transients into the receiver; add suitable protection and keep the logic outputs away from high-impedance measurement paths.
Direkomendasikan
Embedded Equipment Controller
Embedded controllers can use the MC1489AMG to monitor four RS-232 command inputs from panels, programmers, or service equipment. Consolidating the receivers into one 14-pin SOIC reduces PCB area and simplifies routing compared with four single-channel devices. The input resistance of 3.0 kΩ to 7.0 kΩ should be included in the complete interface analysis, and the logic outputs should connect only after the PCB designer confirms supply and pin assignments in the onsemi datasheet.
Direkomendasikan
Medical and Laboratory Equipment
The MC1489AMG can serve as the receiving element in laboratory instruments that receive commands from RS-232 control consoles. Its four channels and 14-pin package simplify multi-port command reception without requiring a combined transceiver. Because connected cables can introduce noise and ground differences, use appropriately rated protection, maintain defined equipment grounding, and validate the complete patient-environment requirements separately when the instrument is used in a medical application.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MC1489AMG — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MC1489NE4 | MC1489NG4 | MC1489D |
|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | Texas Instruments |
| Package | SOIC-14 (SOEIAJ-14) | SOIC-14 (SOEIAJ-14) | SOIC-14 (SOEIAJ-14) | SOIC-14 |
| Receiver Channels | 4 | 4 | 4 | 4 |
| Interface Standard | EIA-232D | EIA-232D | EIA-232D | EIA-232D |
| Transmitter Channels | 0 | 0 | 0 | 0 |
| Terminal Count | 14 | 14 | 14 | 14 |
Diferensiator Kunci
- Four receive-only EIA-232D channels in one package (vsMC1488NE4)
- Broad bipolar input signal capability (vsMC1489NE4)
- Pin-compatible onsemi sourcing path (vsMC1489D)
Catatan Desain
Assign the four receiver inputs directly from the protected connector area to their numbered package pins, and keep the associated outputs away from high-current switching nodes. Maintain a continuous ground reference beneath the interface section where practical. Since the device includes four receivers but no transmitters, use a separate line-driver device when an interface port must transmit.
Do not treat the MC1489AMG as a general-purpose logic input. Its receivers are designed for EIA-232D signal levels and provide a specified input range of −30 V to +30 V. Confirm polarity, logic output states, supply requirements, and input thresholds from the onsemi datasheet before connecting the outputs directly to controller pins.
Place connector-side protection and any required input network before the receiver pins rather than distributing raw cable traces across the PCB. Keep these nets separated from clocks, switching inductors, and sensitive analog inputs. The 3.0 kΩ to 7.0 kΩ input resistance should be included when reviewing the complete interface network.
Follow the manufacturer supply and bypass recommendations when routing VCC and GND. Avoid long supply branches between the interface IC and its local decoupling capacitor, and provide a low-impedance return path for each connected serial device. Review output-level and supply compatibility with the receiving controller before approving the interface design.
Informasi Konformitas
The component is a commercial extended interface IC, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 qualification is not indicated.