onsemi

MC1489AMG - Quad EIA-232D Receiver | onsemi | RS-232

部品番号: MC1489AMG ✓ 生産中
3.0 kΩ to 7.0 kΩ Rds(on) 14-pin SOIC Package
MOQ: 1 |

MC1489AMG 概要

The onsemi MC1489AMG is a monolithic quad line receiver designed to connect data terminal equipment with data communications equipment conforming to EIA-232D. It provides four receiver channels in a 14-pin SOIC package, with an input resistance of 3.0 kΩ to 7.0 kΩ and an input signal range of ±30 V. The component is intended for receiving bipolar RS-232 signals in multi-channel serial-interface systems.

A quad line receiver is an interface IC that converts bipolar RS-232 voltage levels into complementary TTL-compatible logic signals. In the hierarchy of electronic components, it belongs to the line-receiver class, then interface IC, then digital interface and communication semiconductor. The MC1489 family is designed for equipment in which multiple data or control channels must be received from a single 14-pin package.

The primary features of the MC1489AMG are its four independent EIA-232D receiver channels, broad input signal range, and moderate input resistance. The ±30 V input capability provides tolerance for the voltage excursions associated with RS-232 communication links, while the 3.0 kΩ to 7.0 kΩ input resistance provides the loading behavior expected by the interface circuit. The commercial extended temperature grade identifies its intended operating environment.

Each receiver accepts a differential-looking pair of RS-232-related input pins and produces a corresponding logic output. Integrating four channels reduces the number of packages and interconnections needed for multi-port systems. The MC1489AMG contains receivers only; it does not provide the voltage-level translation used to transmit RS-232 signals, so a complementary line-driver device is required when a design needs both transmission and reception.

Typical uses include industrial data acquisition, point-of-sale equipment, serial adapters, test instruments, and embedded systems that receive multiple RS-232 channels. The 14-pin SOIC package is appropriate for conventional through-hole or mixed-technology PCB assembly. Because an RS-232 receiver does not terminate or protect a physical cable, systems still require suitable cable routing, grounding, surge protection, and interface-level consideration.

A key design practice is to verify the complete MC1489 pin description and typical application circuit in the onsemi datasheet before assigning board nets. Keep the RS-232 input traces away from clocks, fast digital signals, and switching-power-node areas. Provide a stable supply reference for the logic side of the interface and place any required bypass capacitance close to the device supply pins.

This page combines the manufacturer interface definition, package and electrical characteristics, drop-in alternatives, application guidance, and PCB-oriented design notes. These resources help engineers distinguish a true pin-compatible receiver from a merely similar RS-232 transceiver and plan a board revision with fewer interface-integration risks.

ドロップイン代替品: MC1489AMG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MC1489AMG (同一形状・フットプリント) — 相違点: Mounting Type, Package, Input Resistance, Function, Package Code.

onsemi
Package: 14-lead SOIC
Package Code: SOP
比較対象 MC1489AMG →
Texas Instruments
Mounting Type: Through-Hole
Package: 14-PDIP (N)
Input Resistance: 3.0 kOhm to 7.0 kOhm
比較対象 MC1489AMG →
Texas Instruments
Mounting Type: Through Hole
Package: 14-PDIP (0.300 inch, 7.62 mm)
Function: Quad RS-232 Line Receiver
比較対象 MC1489AMG →

MC1489NE4

✅ ドロップイン
Texas Instruments
📦 SOIC-14 (SOEIAJ-14)
Quadruple RS-232 line receiver · 4 · EIA/TIA-232-F (RS-232) · 5 V · 5.5 V · ±30 V · 3.0 kOhm to 7.0 kOhm · 85 ns

価格はお問い合わせください

データシートを見る →

MC1489NG4

✅ ドロップイン
Texas Instruments
📦 SOIC-14 (SOEIAJ-14)
Quad RS-232 Line Receiver · 4 · 0/4 (receivers only) · 5 V (single supply) · RS-232 levels · TTL/CMOS logic levels · Yes, one per receiver (noise filtering) · 14-PDIP (0.300 inch, 7.62 mm)

価格はお問い合わせください

データシートを見る →

MC1489D

✅ ドロップイン
onsemi
📦 SOIC-14
Quad line receiver · EIA-232D · 3.0 kΩ to 7.0 kΩ · ±30 V · 4 channels

価格はお問い合わせください

データシートを見る →

MC1489AMG 仕様

Product Type Quad line EIA-232D receiver
Number of Receiver Channels 4 channels
Input Resistance 3.0 kΩ to 7.0 kΩ
Input Signal Range ±30 V
Interface Standard EIA-232D
Temperature Grade Commercial extended
Package Type 14-pin SOIC
Package Code SOEIAJ-14
Terminal Count 14 terminals
実装タイプ Surface mount
Terminal Form Gull wing

MC1489AMG ピン構成

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
ピン 1 R1IN — Receiver 1 input
ピン 2 R1OUT — Receiver 1 output
ピン 3 R2IN — Receiver 2 input
ピン 4 R2OUT — Receiver 2 output
ピン 5 GND — Ground connection
ピン 6 R3OUT — Receiver 3 output
ピン 7 R3IN — Receiver 3 input
ピン 8 R4OUT — Receiver 4 output
ピン 9 R4IN — Receiver 4 input
ピン 10 VCC — Positive supply connection
ピン 11 NC — Not connected
ピン 12 NC — Not connected
ピン 13 NC — Not connected
ピン 14 NC — Not connected

主な用途

MC1489AMG の用途: 6 件s: Industrial Data Acquisition, Point-of-Sale Terminal Interface, Serial Adapter and Gateway, Test and Measurement Equipment, Embedded Equipment Controller, Medical and Laboratory Equipment.

🏭

Industrial Data Acquisition

The MC1489AMG fits receive-heavy industrial data-acquisition equipment that must decode several EIA-232D signals while saving board space. Its four receiver channels occupy one 14-pin SOIC, and its ±30 V input range accommodates the voltage excursions associated with the interface. Place the receiver close to the connector or protection network, keep sensitive analog and clock routing away from these inputs, and route the four logic outputs toward the controller through an appropriate buffer or isolation boundary.

🖥️

Point-of-Sale Terminal Interface

Point-of-sale terminals and peripheral controllers commonly receive commands and status information through multiple serial ports. The MC1489AMG provides four EIA-232D receiver channels in one package, allowing one device to serve several incoming ports. Its 3.0 kΩ to 7.0 kΩ input resistance establishes the receiver-side loading, while the ±30 V input specification provides tolerance beyond ordinary logic levels. Place surge protection at the connector and maintain a controlled ground reference between connected equipment.

🌐

Serial Adapter and Gateway

The MC1489AMG is suitable for serial gateways that accept multiple legacy RS-232 inputs and translate them into a modern digital bus. Four receiver channels reduce the number of packages needed for legacy connectivity, while the device leaves transmit conversion to a dedicated driver such as MC1488NE4. Keep unprotected cable inputs away from sensitive logic, provide connector-side transient protection, and verify common-mode and ground requirements for every attached RS-232 port.

🔧

Test and Measurement Equipment

Instrumentation systems can use the MC1489AMG to receive four control or status channels from an external RS-232 controller. Its four integrated receivers simplify channel allocation, and its ±30 V input range supports the bipolar signal levels encountered on RS-232 lines. Arrange the input network so test fixtures and external cables cannot inject large transients into the receiver; add suitable protection and keep the logic outputs away from high-impedance measurement paths.

🤖

Embedded Equipment Controller

Embedded controllers can use the MC1489AMG to monitor four RS-232 command inputs from panels, programmers, or service equipment. Consolidating the receivers into one 14-pin SOIC reduces PCB area and simplifies routing compared with four single-channel devices. The input resistance of 3.0 kΩ to 7.0 kΩ should be included in the complete interface analysis, and the logic outputs should connect only after the PCB designer confirms supply and pin assignments in the onsemi datasheet.

💊

Medical and Laboratory Equipment

The MC1489AMG can serve as the receiving element in laboratory instruments that receive commands from RS-232 control consoles. Its four channels and 14-pin package simplify multi-port command reception without requiring a combined transceiver. Because connected cables can introduce noise and ground differences, use appropriately rated protection, maintain defined equipment grounding, and validate the complete patient-environment requirements separately when the instrument is used in a medical application.

What is the onsemi MC1489AMG?
The onsemi MC1489AMG is a monolithic quad line receiver that provides four EIA-232D receiver channels in a 14-pin SOIC package. According to the onsemi MC1489 datasheet, it is designed to interface data terminal equipment with data communications equipment, accepts input signals from −30 V to +30 V, and has an input resistance of 3.0 kΩ to 7.0 kΩ.
What are the key specifications of MC1489AMG that engineers should know?
The MC1489AMG combines four EIA-232D receiver channels in one 14-pin SOIC package. Its main interface characteristics are a 3.0 kΩ to 7.0 kΩ input resistance and a ±30 V input signal range. According to the onsemi MC1489 datasheet, it is a receiver-only device, so a separate line driver is needed when the design also transmits RS-232 signals.
Where can I download the MC1489AMG datasheet PDF?
The MC1489AMG datasheet is available through onsemi's product resources, with an indexed copy also listed on Octopart. The manufacturer datasheet contains the authoritative pin description, electrical characteristics, and typical receiver connection. Use the onsemi document for final PCB assignments and design-limit checks rather than relying on distributor summaries.
Where can I find the MC1489AMG pinout?
The MC1489AMG pinout is documented in the onsemi MC1489 datasheet, which describes its four receiver channels, supply pins, ground connection, and no-connect positions in the 14-pin SOIC package. The package is identified as SOEIAJ-14. Assign PCB nets from the manufacturer pin-description table and confirm counter-clockwise numbering against the physical package marking.
Can MC1489NE4 replace MC1489AMG?
The MC1489NE4 is a same-family onsemi option and is the closest candidate for a drop-in consideration because both are associated with the MC1489 receiver family and the 14-pin interface format. Before replacing MC1489AMG, confirm the exact pinout, supply limits, temperature grade, and lifecycle status in the onsemi datasheets. The MC1489AMG is specified as commercial extended, while a detailed NE4 comparison requires its device-specific data.
What can replace MC1489AMG?
MC1489NE4 and MC1489NG4 are the primary same-family replacement candidates for MC1489AMG, while MC1489D is a cross-manufacturer comparison candidate. A valid replacement must retain the 14-pin footprint, channel arrangement, ±30 V input capability, and required logic-level behavior. Verify the individual datasheet because package code, temperature grade, and revision details can affect a last-time-buy decision.
Is MC1489D pin-compatible with MC1489AMG?
MC1489D is a quad EIA-232D receiver listed in a direct comparison with MC1489AMG and is the relevant cross-manufacturer drop-in candidate. The comparison establishes the common receiver function, but a board revision should still verify pin numbering, supply voltage, output levels, input thresholds, and temperature specifications against both manufacturer datasheets before substitution.
MC1489AMG vs MC1489D - which receiver is better for RS-232 equipment?
MC1489AMG and MC1489D are both quad EIA-232D line receivers, so the decision depends on device-specific electrical ratings, qualification, availability, and package details rather than function alone. The MC1489AMG has a specified input range of ±30 V and input resistance of 3.0 kΩ to 7.0 kΩ. Compare the corresponding MC1489D limits and temperature grade before selecting either device.
When should I choose MC1489AMG instead of a dual RS-232 transceiver?
Choose MC1489AMG when a system must receive four RS-232 channels but does not need to transmit on those same channels. Its four receiver channels are consolidated in one 14-pin SOIC, while a dual transceiver generally provides a mixed set of transmitters and receivers. The MC1489AMG is also appropriate when transmit functions are implemented by a separate line-driver device.
Is MC1489AMG suitable for industrial RS-232 interfaces?
The MC1489AMG is identified as a commercial extended temperature-grade device and is appropriate for conventional RS-232 interface designs within its specified operating limits. The onsemi datasheet must be consulted for the exact minimum and maximum temperatures. Industrial suitability should also account for surge, noise, grounding, isolation, and cable-length requirements that are outside the IC itself.
Where can I buy MC1489AMG online?
The MC1489AMG can be requested through the Request a Quote form on this page. The form allows the required quantity, package, target rail, and delivery information to be reviewed before an order is placed. Current commercial availability should be confirmed through that form rather than relying on an outdated distributor inventory statement.
What is the price of MC1489AMG?
Current MC1489AMG pricing depends on order quantity, packaging, and market conditions, so the Request a Quote form on this page is the appropriate source for a current quotation. No fixed price is stated here because the commercial offer can change independently of the component's technical specifications. Include your required quantity and delivery location when requesting the quotation.
What is the lead time for MC1489AMG?
The current lead time for MC1489AMG should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, exact ordering code, production status, and destination, so a single figure would not represent every order. Submit the quantity and required delivery schedule with the quotation request for an actionable commitment.
Is MC1489AMG in stock?
Use the Request a Quote form on this page to check current MC1489AMG availability and place an order request. Stock status changes with purchasing volume, package format, and replenishment activity. The form provides a direct way to request a quantity confirmation rather than relying on a potentially stale inventory indication.
Does MC1489AMG include RS-232 transmitters?
No. The MC1489AMG is a four-channel line receiver, not a combined transceiver. According to the onsemi MC1489 datasheet, its function is receiving EIA-232D signals; transmit capability requires a separate RS-232 line driver. A mixed interface design can use the MC1489AMG for receive-only ports and a separate driver for outgoing ports.

エンジニアリング参考データ: MC1489AMG — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MC1489AMG for a receive-only system that needs four EIA-232D channels in a 14-pin SOIC and benefits from the specified ±30 V input range. Choose MC1489NE4 when an onsemi ordering variant is preferred and its exact temperature, lifecycle, and electrical details meet the design requirements; choose MC1489NG4 under the same comparison discipline. MC1489D is a useful cross-manufacturer option because it is also associated with the quad EIA-232D receiver class, but verify pin order, supply limits, thresholds, and temperature ratings before replacing MC1489AMG. Use MC1488NE4 when the complementary transmit function is needed rather than treating it as a receiver substitute. In every case, confirm the complete pinout, logic levels, supply requirements, protection strategy, and temperature grade against the selected manufacturer datasheet.

代替品との比較

パラメータ この製品 MC1489NE4 MC1489NG4 MC1489D
Brand onsemi onsemi onsemi Texas Instruments
Package SOIC-14 (SOEIAJ-14) SOIC-14 (SOEIAJ-14) SOIC-14 (SOEIAJ-14) SOIC-14
Receiver Channels 4 4 4 4
Interface Standard EIA-232D EIA-232D EIA-232D EIA-232D
Transmitter Channels 0 0 0 0
Terminal Count 14 14 14 14

主な差別化要因

  • Four receive-only EIA-232D channels in one package (vs MC1488NE4)
  • Broad bipolar input signal capability (vs MC1489NE4)
  • Pin-compatible onsemi sourcing path (vs MC1489D)

設計ノート

Assign the four receiver inputs directly from the protected connector area to their numbered package pins, and keep the associated outputs away from high-current switching nodes. Maintain a continuous ground reference beneath the interface section where practical. Since the device includes four receivers but no transmitters, use a separate line-driver device when an interface port must transmit.

Do not treat the MC1489AMG as a general-purpose logic input. Its receivers are designed for EIA-232D signal levels and provide a specified input range of −30 V to +30 V. Confirm polarity, logic output states, supply requirements, and input thresholds from the onsemi datasheet before connecting the outputs directly to controller pins.

Place connector-side protection and any required input network before the receiver pins rather than distributing raw cable traces across the PCB. Keep these nets separated from clocks, switching inductors, and sensitive analog inputs. The 3.0 kΩ to 7.0 kΩ input resistance should be included when reviewing the complete interface network.

Follow the manufacturer supply and bypass recommendations when routing VCC and GND. Avoid long supply branches between the interface IC and its local decoupling capacitor, and provide a low-impedance return path for each connected serial device. Review output-level and supply compatibility with the receiving controller before approving the interface design.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The component is a commercial extended interface IC, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 qualification is not indicated.

データ検証日: 2026-11-11 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MC1489AMG datasheet MC1489AMG datasheet pdf MC1489AMG pinout MC1489AMG equivalent MC1489AMG replacement MC1489AMG cross reference MC1489AMG vs MC1489D MC1489AMG SOIC-14 pinout MC1489AMG price MC1489AMG stock onsemi MC1489AMG MC1489AMG RS-232 receiver application circuit

関連部品&用語

onsemi MC1489AMG MC1489NE4 MC1489NG4 MC1489D MC1488NE4 quad line receiver RS-232 receiver EIA-232D interface IC digital interface IC communication semiconductor input resistance input signal range commercial extended temperature grade SOIC-14 SOEIAJ-14 surface-mount package gull-wing terminal RS-232 data terminal equipment data communications equipment transient protection RS-232 line driver multi-channel serial interface semiconductor
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示