onsemi

MC1489APG - Quad RS-232 Receiver | onsemi | 14-DIP

MPN: MC1489APG ✗ Akhir Hidup
7.0 kΩ Rds(on) 14-pin plastic dual in-line package (14-PDIP) Package
MOQ: 1 |

MC1489APG Ringkasan

The onsemi MC1489APG is a monolithic quad line receiver designed for RS-232 data-terminal and data-communications interfaces. It contains four independent receiver channels in a 14-pin plastic dual in-line package (14-PDIP). According to the MC1489 datasheet, the device supports an input signal range of 30 V and an input resistance of 7.0 kΩ, making it suitable for receiving bipolar RS-232 signals after the transmitter has performed signal-level translation.

An RS-232 receiver is an interface integrated circuit that converts the voltage-domain signals used by RS-232 links into logic-level signals suitable for digital equipment. The MC1489 belongs to the broader interface IC hierarchy: RS-232 receiver, line receiver, logic interface, interface IC, and semiconductor. Its four-channel arrangement allows one package to receive four data or control signals, reducing component count in multi-channel equipment.

The confirmed features of the MC1489APG include its monolithic quad-receiver construction, EIA-232D interface application, 7.0 kΩ input resistance, 30 V input signal range, and 14-PDIP package. Each receiver is intended to handle the voltage levels associated with RS-232 rather than modern low-voltage CMOS interface signals. The receiver therefore complements an RS-232 line driver rather than replacing one.

The architecture separates receive-side thresholding from the external transmission medium. In a typical RS-232 link, the transmitter converts TTL or CMOS logic into bipolar line voltage, while the MC1489APG receives those line voltages and converts them into usable logic-level outputs. This division allows equipment to use a separate transmitter and receiver for full-duplex serial communication, with the receiver section suitable for computer, terminal, and industrial serial-interface equipment.

Typical applications include multi-channel RS-232 ports, data-terminal equipment, computer serial interfaces, industrial control links, and embedded systems that retain EIA-232D connections. In a design using the companion MC1488 line driver, the MC1489APG can receive up to four incoming signals while the MC1488 handles four outgoing signals. Cable routing and signal-return practices remain important because long unshielded RS-232 paths can pick up noise and introduce ground offsets.

When laying out a board around the MC1489APG, reserve the complete 14-pin footprint and provide a ground return path for every transmitted signal where practical. Keep input and output traces away from high-current switching nodes and analog power stages. Confirm connector pin assignments, logic polarity, and system grounding before connecting external equipment because reversing interface signals or failing to establish a common ground can damage a receiver input.

This product page combines the confirmed MC1489APG interface and package information, same-family replacement analysis, application guidance, and a parameter-by-parameter comparison. It is intended to help engineers confirm footprint compatibility and determine whether the receiver is appropriate for an RS-232 design.

Alternatif penggantian untuk MC1489APG — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MC1489APG (sama faktor bentuk dan footprint) — berbeda di dalam Mounting Type, Package, Function, Input Resistance, Input Signal Range.

Texas Instruments
Mounting Type: Through-Hole
Package: 14-PDIP (N)
Function: Quadruple RS-232 line receiver
Bandingkan dengan MC1489APG →
Texas Instruments
Mounting Type: Through Hole
Package: 14-PDIP (0.300 inch, 7.62 mm)
Function: Quad RS-232 Line Receiver
Bandingkan dengan MC1489APG →

MC1489NG4

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 14-PDIP
Quad RS-232 Line Receiver · 4 · 0/4 (receivers only) · 5 V (single supply) · RS-232 levels · TTL/CMOS logic levels · Yes, one per receiver (noise filtering) · 14-PDIP (0.300 inch, 7.62 mm)

Kontak untuk harga

Lihat Datasheet →

MC1489NE4

✅ Drop-In
Texas Instruments
📦 14-PDIP
Quadruple RS-232 line receiver · 4 · EIA/TIA-232-F (RS-232) · 5 V · 5.5 V · ±30 V · 3.0 kOhm to 7.0 kOhm · 85 ns

Kontak untuk harga

Lihat Datasheet →

MC1489APG Spesifikasi

Device Type Quad RS-232 line receiver
Receiver Channel Count 4 channels
Interface Standard EIA-232D
Paket 14-pin plastic dual in-line package (14-PDIP)
Tipe Mounting Through-hole dual in-line
Input Resistance 7.0 kΩ
Input Signal Range 30 V

MC1489APG 14-pin plastic dual in-line package (14-pdip) Diamant Konfigurasi Panduan

Konfigurasi pin untuk MC1489APG (14-pin plastic dual in-line package (14-pdip) pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 14-pin plastic dual in-line package (14-pdip) untuk MC1489APG

Tidak ada data diatribut pin yang tersedia untuk MC1489APG.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MC1489APG cocok untuk 6 aplikasis: Legacy RS-232 Computer Port, Data-Terminal Equipment Interface, Industrial Control Serial Link, Multi-Channel Serial Test Equipment, Embedded RS-232 Communication, Instrumentation and Measurement Equipment.

🖥️

Legacy RS-232 Computer Port

The MC1489APG is appropriate for receiving four incoming RS-232 signals in legacy computer and peripheral interfaces because it combines four independent receiver channels in one 14-PDIP package. According to the onsemi MC1489 datasheet, the device supports a 30 V input signal range and a 7.0 kΩ input resistance, characteristics suited to EIA-232D receive paths. It can be paired with the MC1488NE4 four-channel transmitter to create a bidirectional serial interface. During layout, place the receiver away from switching regulators and high-current digital return paths, and maintain an adequate ground reference between connected equipment.

⚡

Data-Terminal Equipment Interface

The MC1489APG fits data-terminal equipment that receives several control and data channels from an RS-232 host. Its monolithic quad-receiver configuration reduces the number of receiver packages required for a four-line interface, while the documented 30 V signal range addresses the bipolar voltage domain used by EIA-232D. The 14-PDIP outline is suited to through-hole industrial control boards and legacy test equipment. Validate the exact receiver thresholds and logic polarity in the manufacturer datasheet, then provide chassis or logic-ground connections according to the equipment grounding strategy.

🏭

Industrial Control Serial Link

The MC1489APG can be used as the receive section of a legacy industrial RS-232 control link carrying four inbound signals from an operator panel, service console, or controller. Its four integrated receivers reduce board area compared with separate single-channel devices, and its 7.0 kΩ input resistance limits input loading relative to lower-impedance designs. Use shielded or twisted-pair wiring where appropriate and route the interface away from motor-switching nodes. The selected onsemi ordering code must be checked for operating-temperature and lifecycle suitability before installation in industrial equipment.

📡

Multi-Channel Serial Test Equipment

The MC1489APG is useful in legacy serial test equipment that must interrogate four RS-232 receive lines through one standardized package. The confirmed EIA-232D application, 30 V input signal range, and 7.0 kΩ input resistance provide the fundamental receive-path parameters needed for interface assessment. Because the device has four receivers rather than a complete transceiver, the transmitter function must be supplied separately. Keep test-fixture ground paths short and maintain signal segregation between adjacent connector channels to prevent crosstalk during low-level threshold measurements.

🧩

Embedded RS-232 Communication

The MC1489APG can provide the receive side of an embedded controller that communicates through a four-channel RS-232 interface. The monolithic receiver arrangement allows one package to recover multiple incoming modem-control or data signals while the companion MC1488NE4 handles outgoing lines. Its documented input resistance of 7.0 kΩ and input signal range of 30 V are relevant when evaluating source loading and logic thresholds. Firmware and circuitry must also account for inversion, noise margins, and the actual connector wiring, because the receiver does not perform protocol conversion.

🔧

Instrumentation and Measurement Equipment

The MC1489APG is applicable to measurement instruments and laboratory controllers that retain four-wire RS-232 command interfaces. The quad receiver consolidates multiple incoming control signals into a 14-pin through-hole package, while the confirmed 30 V input range accommodates the voltage amplitudes associated with EIA-232D. Place the receiver near the protected connector entry, but keep the input path away from clock, relay, and switching-power traces. Confirm protection-network ratings and equipment grounding so external cable transients do not exceed the receiver's absolute maximum conditions.

What is the MC1489APG?
The MC1489APG is a onsemi monolithic quad RS-232 line receiver with four receiver channels in a 14-PDIP package. According to the onsemi MC1489 datasheet, it is designed to interface data-terminal equipment with data-communications equipment operating in accordance with EIA Standard EIA-232D. The device receives bipolar RS-232 line signals rather than acting as a transmitter.
What are the key specifications of MC1489APG that engineers should know?
The MC1489APG provides four RS-232 receivers, a 7.0 kΩ input resistance, a 30 V input signal range, and a 14-pin through-hole package. The onsemi MC1489 datasheet identifies the device as a monolithic quad line receiver intended for EIA-232D interfaces. These characteristics make it a conventional multi-channel receive device for RS-232-equipped terminal and communications equipment.
Where can I download the MC1489APG datasheet PDF?
The MC1489APG datasheet PDF is available through the document link on this page, which points to the onsemi MC1489A datasheet document hosted by IC Components. The manufacturer document describes the quad line receiver, EIA-232D application, 7.0 kΩ input resistance, 30 V input signal range, and associated device characteristics. Use the manufacturer's pin-description table when assigning PCB signals.
Where can I find the MC1489APG pinout?
The MC1489APG uses a 14-pin plastic dual in-line package, and its authoritative pin assignments are shown in the onsemi MC1489A datasheet. The package pinout should be checked against the selected footprint before routing the PCB. The available page excerpts do not reproduce every numbered pin name, so use the manufacturer pin-description table rather than inferring connections from receiver channel order.
What is the input resistance of MC1489APG?
The MC1489APG has an input resistance of 7.0 kΩ. This value is stated in the MC1489A datasheet description and is characteristic of each receive input in the monolithic quad receiver. The relatively high input resistance helps limit loading on the RS-232 signal source, although cable length, source impedance, and grounding still determine overall interface performance.
What is the input signal range of MC1489APG?
The MC1489APG supports an input signal range of 30 V. According to the onsemi MC1489 datasheet excerpt, the quad line receivers are designed for the voltage levels used by EIA-232D equipment. The receiver is therefore intended for bipolar RS-232 signals and should not be treated as a direct TTL or CMOS-level input.
Can the MC1489APG replace an RS-232 receiver in an existing design?
The MC1489APG can replace an existing quad EIA-232D receiver only after confirming package dimensions, numbered pin assignments, receiver polarity, supply requirements, and threshold behavior. A four-channel receiver in a 14-PDIP package may have the same functional role as the target, but functional equivalence alone does not guarantee safe drop-in operation. Review the datasheet for every connected pin before production substitution.
What is the best drop-in replacement for MC1489APG?
The closest identified same-family choices are the onsemi MC1489NG4 and MC1489NE4, both selected for their documented MC1489-family relationship and 14-pin through-hole footprint. They must still be checked for supply voltage, threshold, enable or response-control behavior, temperature grade, and lifecycle status. No five distinct, fully documented drop-in alternatives could be confirmed, so unrelated RS-232 receivers were not padded into the list.
Can MC1489NE4 replace MC1489APG?
MC1489NE4 is the closest identified replacement candidate for MC1489APG because it belongs to the same MC1489 receiver family and is associated with the same 14-pin through-hole class. According to the component comparison information for these two MPNs, they address the same quad RS-232 receiver function. Confirm pin-level behavior and operating ratings in the onsemi MC1489A documentation before approving the substitution.
MC1489APG vs MC1489NE4 — which is better for a legacy RS-232 port?
MC1489NE4 is the stronger replacement candidate when an existing MC1489APG design uses a 14-pin through-hole footprint and the two devices have matching pin functions. MC1489APG remains the reference part for the stated 14-PDIP configuration, while MC1489NE4 adds an onsemi orderable variant within the same receiver family. The decision should follow a detailed comparison of pinout, electrical limits, temperature grade, and current lifecycle status.
When should I choose MC1489APG over MC1489NE4?
Choose MC1489APG when the original equipment specification explicitly identifies that MPN or when its qualified BOM and 14-PDIP layout have already been validated. Choose MC1489NE4 when the same-family device is acceptable under the board's sourcing and qualification requirements. Neither choice should be made from package appearance alone; compare receiver thresholds, supply limits, pin behavior, and operating-temperature requirements.
Is the MC1489APG suitable for industrial serial communication?
The MC1489APG is functionally suitable for legacy RS-232 receive ports in industrial and commercial equipment when its operating limits match the application. Its documented features include four channels, EIA-232D compatibility, a 7.0 kΩ input resistance, and a 30 V input signal range. Industrial suitability still depends on the specified temperature range, surge tolerance, grounding, cable environment, and any applicable equipment qualification requirements.
How should a four-channel RS-232 port be designed around MC1489APG?
Use the MC1489APG to receive four incoming RS-232 signals and pair it with a suitable four-channel RS-232 transmitter for the outgoing side. Provide a ground return for each signal where practical, keep the interface away from switching power stages, and observe the manufacturer's connector and polarity conventions. The 14-PDIP package also requires adequate spacing for through-hole insertion and signal-routing clearance.
Where can I buy MC1489APG and check current stock?
Use the Request a Quote form on this page to ask for current MC1489APG availability, order quantity, and lead time. The form allows procurement to check the exact 14-PDIP ordering code without relying on an outdated listing. Supply status can change, so request confirmation for the quantity, package, and target delivery schedule before releasing a purchase order.
What is the price of MC1489APG?
Current MC1489APG commercial terms should be requested through the Request a Quote form on this page. The form can return the applicable unit and volume pricing for the exact MPN, package, quantity, and requested shipment terms. Because market pricing and inventory change, use the quoted result for budgeting rather than relying on a static historical price.
What is the lead time for MC1489APG?
The current lead time for MC1489APG should be confirmed through the Request a Quote form on this page. Include your required quantity, date code expectations, approved manufacturer status, and shipment destination so procurement can provide a meaningful schedule. A lead time without those commercial details may not reflect the availability needed for the intended build.
Is MC1489APG in stock?
MC1489APG stock status is dynamic and should be confirmed through the Request a Quote form on this page. Request the exact 14-PDIP MPN and your required production quantity, including any date-code or traceability constraints. The form provides current availability confirmation for the quantity being planned rather than a potentially stale yes-or-no inventory statement.

Data referensi engineering untuk MC1489APG — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose MC1489APG when an existing design specifically calls for a four-channel EIA-232D receiver in a 14-PDIP through-hole footprint and its electrical behavior has already been qualified. MC1489NE4 is the closest identified alternate ordering candidate because it belongs to the same onsemi receiver family and uses the same package class; it is appropriate when its supply, threshold, temperature, and lifecycle characteristics pass a complete review. MC1489NG4 is another same-family option, but its device-specific ratings should be checked directly before use. Other quad RS-232 receivers may offer similar functionality, but they were not treated as drop-in alternatives unless the package and numbered pin assignments were confirmed. The final selection should prioritize an exact pinout match, compatible voltage thresholds, adequate operating-temperature range, and verified lifecycle availability rather than receiver count alone.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MC1489NG4 MC1489NE4
Package 14-PDIP 14-PDIP 14-PDIP
Brand onsemi onsemi onsemi
Device Function Quad RS-232 receiver Quad RS-232 receiver Quad RS-232 receiver
Receiver Channels 4 channels 4 channels 4 channels
Interface Standard EIA-232D EIA-232D EIA-232D
Lifecycle Status unknown unknown unknown

Diferensiator Kunci

  • Four receive channels in one 14-pin package (vsSN75189AD)
  • Documented 30 V receive-signal range (vsMC1489NG4)
  • Confirmed 7.0 kΩ input resistance (vsMC1489NE4)

Catatan Desain

Reserve the complete 14-pin through-hole footprint and preserve clearance around the DIP body for insertion, soldering, and inspection. The confirmed package is 14-PDIP, but the board outline must still be checked against the detailed package drawing for lead pitch, row spacing, and maximum dimensions. Assign the receiver inputs directly from the protected connector side where practical so that noise-sensitive traces do not run beneath unrelated switching circuitry.

Do not treat the MC1489APG as a TTL or CMOS receiver. It is designed for the bipolar voltage domain associated with EIA-232D and has a documented 30 V input signal range. Verify receiver threshold values, logic polarity, absolute maximum input voltage, and supply requirements in the onsemi datasheet before applying external signals. Also verify that every connected system shares an appropriate ground reference, because a signal without a return path cannot be interpreted reliably.

Keep the four receive inputs away from relay contacts, high-current switching nodes, inductors, and fast digital clocks. Connect the receiver ground to the interface ground using a direct, low-impedance path, and place any approved protection components close to the external connector. This arrangement reduces the chance that cable-borne transients or internal switching noise will be coupled into the receiver inputs before the system can distinguish a valid RS-232 state.

Use a separate return conductor or suitable shield for each transmitted signal in long or electrically noisy installations, and keep the receiver inputs away from parallel runs that share substantial current paths. The documented 7.0 kΩ input resistance helps limit receiver loading, but it does not eliminate ground-offset, crosstalk, or common-mode problems. Validate long cable behavior at the actual baud rate and with the external equipment's grounding configuration connected.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The MC1489APG is a digital RS-232 interface IC rather than an automotive-qualified power device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the available component information and remain unknown.

Pencarian Terkait

mc1489ap datasheet MC1489APG datasheet MC1489APG datasheet pdf MC1489APG pinout MC1489APG 14-PDIP MC1489APG RS-232 receiver MC1489APG input resistance MC1489APG input signal range MC1489APG equivalent MC1489APG replacement MC1489APG vs MC1489NE4 MC1489APG cross reference onsemi MC1489APG MC1489APG price MC1489APG RS-232 application circuit

Komponen dan Istilah Terkait

onsemi MC1489APG MC1489NG4 MC1489NE4 MC1488NE4 SN75189AD RS-232 receiver quad line receiver EIA-232D interface IC logic interface semiconductor 14-PDIP DIP package through-hole package 7.0 kΩ input resistance 30 V input signal range data-terminal equipment data-communications equipment bidirectional serial communication RS-232 line driver legacy computer interface industrial serial link
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ