onsemi

MC34072PG - Dual 44V Op Amp with 13V/us | onsemi

MPN: MC34072PG ✓ Aktif
3 V to 44 V Vdss 8-PDIP, 0.300 in (7.62 mm) pitch Package
MOQ: 1 |

MC34072PG Ringkasan

onsemi MC34072PG is a dual general-purpose operational amplifier with a 3 V to 44 V supply range, 4.5 MHz gain-bandwidth product, and 13 V/us slew rate in an 8-pin PDIP package. The device provides two amplifiers with single-ended outputs and uses quality bipolar fabrication without JFET input technology.

An operational amplifier is an amplifier IC that uses high-gain differential feedback to control an output voltage. The MC34072 family belongs to the broader operational amplifier, analog IC, and semiconductor hierarchies. It can operate from split supplies or a single supply and is particularly suited to circuits requiring higher supply tolerance than typical low-voltage rail-to-rail amplifiers.

The 4.5 MHz gain-bandwidth product supports useful closed-loop bandwidth at practical gain settings, while the 13 V/us slew rate allows outputs to change quickly without requiring JFET inputs. The manufacturer lists a 5 mV input offset-voltage figure for the commercial-temperature MC34072PG, and its bipolar construction is suited to general-purpose analog signal conditioning.

The MC34072 series combines precision bipolar performance with relatively high operating-voltage capability and fast settling behavior. Each amplifier can serve as an inverting or non-inverting stage, and the two independent channels allow simultaneous processing of related signals. This architecture is useful when a board needs one amplifier for filtering and another for buffering or gain control.

Typical uses include industrial sensor interfaces, low-frequency active filters, audio preamplifier stages, transducer amplifiers, feedback-control loops, and general instrumentation powered from industrial supply rails. The 44 V maximum supply also makes the device relevant to legacy 24 V control systems, provided the selected operating voltage and dissipation remain within the device ratings.

Place bypass capacitors close to the supply pins and route feedback components away from input and output traces to reduce oscillation risk. Confirm output swing, input common-mode range, load current, and thermal dissipation for each amplifier channel. Dual packages require evaluation of channel-to-channel behavior, not only the aggregate device rating.

This product page combines the MC34072PG operating characteristics with engineering-focused pin, packaging, replacement, and design guidance. It supports faster selection by placing verified headline specifications beside the practical constraints that determine whether the dual amplifier can operate safely in a target circuit.

Alternatif penggantian untuk MC34072PG — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MC34072PG (sama faktor bentuk dan footprint) — berbeda di dalam Input Offset Voltage, Mounting Type, Package, Supply Voltage Range.

onsemi
Input Offset Voltage: 5 mV maximum
Mounting Type: Through-hole
Package: 8-PDIP, 0.300 inch (7.62 mm) pitch
Bandingkan dengan MC34072PG →

MC34072P

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-PDIP (0.300, 7.62 mm)
Same MC34072 family with identical 44 V maximum supply, 4.5 MHz gain-bandwidth product, and 13 V/us slew rate; ordering suffix and packaging differ

📋 Alternatif referensi (tidak dalam katalog)

MC34072VPG

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-PDIP (0.300, 7.62 mm)
Same MC34072 family and 8-PDIP footprint; core 44 V, 4.5 MHz, and 13 V/us ratings differ by 0%, while suffix-specific ordering or temperature details require confirmation

📋 Alternatif referensi (tidak dalam katalog)

MC33072P

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-PDIP (0.300, 7.62 mm)
Same dual bipolar MC33xxx pin-compatible family in 8-PDIP; specific voltage, offset, and temperature differences must be checked against the MC34072PG datasheet

📋 Alternatif referensi (tidak dalam katalog)

MC33072PG

✅ Drop-In
onsemi
📦 8-PDIP (0.300, 7.62 mm)
General-purpose operational amplifier · 2 circuits · Voltage-feedback dual amplifier · Bipolar · 3.0 V to 44 V · Supported · Supported · 4.5 MHz

Kontak untuk harga

Lihat Datasheet →

MC34072PG Rating Maksimal & Karakteristik Listrik

Product Type Dual general-purpose operational amplifier
Number of Circuits 2 circuits
Tipe Output Single-ended
Supply Voltage Range 3 V to 44 V
Gain-Bandwidth Product 4.5 MHz
Slew Rate 13 V/us
Input Offset Voltage 5 mV
Amplifier Technology Quality bipolar fabrication without JFET input technology
Supply Configuration Single supply or split supply operation
Paket 8-PDIP, 0.300 in (7.62 mm) pitch
Tipe Mounting Through-hole insertion
Packaging Tube
Operating Temperature Grade Commercial temperature grade

Konfigurasi Pin MC34072PG

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin produk 1 OUTA — Amplifier A output
Pin produk 2 IN A- — Inverting input for amplifier A
Pin produk 3 IN A+ — Non-inverting input for amplifier A
Pin produk 4 V- — Negative supply or ground connection
Pin produk 5 IN B+ — Non-inverting input for amplifier B
Pin produk 6 IN B- — Inverting input for amplifier B
Pin produk 7 OUTB — Amplifier B output
Pin produk 8 V+ — Positive supply connection

Aplikasi Umum

MC34072PG cocok untuk 6 aplikasis: Industrial Sensor Signal Conditioning, 24 V Control-System Feedback Amplifier, Active Audio Preamplifier, Low-Frequency Active Filter, Transducer and Bridge-Signal Interface, General-Purpose Instrumentation Buffer.

🏭

Industrial Sensor Signal Conditioning

The MC34072PG suits industrial sensor-conditioning stages that need two amplifier channels and a supply range extending to 44 V. One channel can amplify a transducer signal while the other provides filtering or an active differential input. Its 4.5 MHz gain-bandwidth product gives useful closed-loop bandwidth at moderate gains, and the 13 V/us slew rate reduces large-signal distortion during rapid input changes. The wide supply tolerance is particularly useful on 24 V control equipment, provided transient protection keeps every pin within the absolute maximum limits.

⚙️

24 V Control-System Feedback Amplifier

The MC34072PG can amplify error and feedback signals in a 24 V control loop without requiring a low-voltage dual amplifier. The listed 3 V to 44 V operating range provides headroom for industrial rails, while 4.5 MHz gain-bandwidth product supports bandwidth above slow regulator loops. A 13 V/us slew rate helps the output track rapidly changing error signals. Designers should still verify the actual input common-mode range, output swing, stability with the selected feedback network, and power dissipation at the highest expected control voltage.

🎧

Active Audio Preamplifier

The MC34072PG provides two independent bipolar amplifier channels for microphone preamplification, line-level gain, or active filtering in audio equipment. Its 13 V/us slew rate can improve large-signal behavior compared with slower general-purpose amplifiers, while the 4.5 MHz gain-bandwidth product provides bandwidth beyond the audio range. The 5 mV listed input offset is important in low-level gain stages. For high-fidelity use, evaluate noise, input bias current, channel matching, output drive into the selected load, and the required dual-supply arrangement.

🔧

Low-Frequency Active Filter

The MC34072PG can implement active filters where two amplifier channels are needed for a second-order section or separate filtering stages. A 4.5 MHz gain-bandwidth product supports many audio and control-band applications, and the 13 V/us slew rate helps preserve low distortion during rapid waveform changes. Stable implementation depends on the selected noise gain and feedback topology, so use the manufacturer’s recommended operating region and verify phase margin on the final component tolerances. Add input and output isolation where the next stage presents a capacitive load.

📱

Transducer and Bridge-Signal Interface

The MC34072PG can serve as a general-purpose interface for resistive, strain-gauge, or other slow-changing transducer signals when the system operates from a higher-voltage rail. One channel may amplify the sensor output and the other may generate a reference or drive a complementary stage. The 4.5 MHz gain-bandwidth product supports signal bandwidth above many mechanical sensing systems, while 13 V/us slew rate handles step inputs. High-impedance sources may reveal input bias-current effects, so verify leakage, sensor loading, grounding, and shield placement.

🖥️

General-Purpose Instrumentation Buffer

The MC34072PG can buffer two instrumentation signals, isolate a source from the following ADC, or implement gain blocks in laboratory and industrial instrumentation. Its 13 V/us slew rate preserves large-signal fidelity, and the 4.5 MHz gain-bandwidth product supports moderate-bandwidth signal paths. The dual bipolar topology is useful where two channels save board area, but channel matching and offset behavior should be considered at high gain. Confirm input bias current, common-mode limits, output loading, and stability before substituting it for a dedicated precision amplifier.

What are the key specifications of MC34072PG that engineers should know?
The MC34072PG is a dual general-purpose operational amplifier operating from 3 V to 44 V with a 4.5 MHz gain-bandwidth product and a 13 V/us slew rate. According to the onsemi MC34072 product page, it provides two single-ended amplifier circuits in an 8-pin PDIP package. The quality bipolar design avoids JFET input technology and supports single-supply or split-supply operation.
What is the supply voltage range of the MC34072PG?
The MC34072PG operates from 3 V to 44 V. The onsemi MC34072 product page identifies a single-supply range of 3.0 V to 44 V, while the device can also operate from split supplies. This wide range suits industrial control, instrumentation, and legacy 24 V systems, although each power rail must remain within the absolute maximum ratings in the manufacturer datasheet.
What is the gain-bandwidth product and slew rate of MC34072PG?
The MC34072PG has a 4.5 MHz gain-bandwidth product and a 13 V/us slew rate. According to onsemi, these characteristics provide useful speed and fast settling without JFET device technology. The gain-bandwidth product determines the approximate closed-loop bandwidth at a selected noise gain, while slew rate controls the maximum output slope for large-signal transitions.
Where can I download the MC34072PG datasheet PDF?
The official MC34072 product page at onsemi provides the manufacturer datasheet and technical documentation for the MC34072 family. The MC34072PG ordering information identifies the G suffix as the tube-packaged PDIP option. Use the manufacturer PDF for the final pin description, electrical limits, test conditions, and application guidance before releasing a PCB design.
Where can I find the MC34072PG pinout?
The MC34072PG pinout appears in the manufacturer datasheet for the 8-pin PDIP configuration. Use the pin-description table when assigning the two amplifier channels, supply rails, and feedback networks. The package uses the standard 0.300 in (7.62 mm) DIP pitch, and pin 1 is identified by the package marker rather than by an active-low indication.
What is the MC34072PG used for?
The MC34072PG is used for general-purpose analog signal conditioning with two independent amplifier channels. Its 3 V to 44 V supply range, 4.5 MHz gain-bandwidth product, and 13 V/us slew rate suit sensor interfaces, active filters, audio preamplifiers, control-loop amplifiers, and instrumentation. The exact suitability depends on input common-mode range, output swing, noise, stability, and required accuracy.
MC34072PG vs MC34072P - which is the better drop-in choice?
The MC34072PG and MC34072P should be compared by package and ordering suffix before treating either as a substitute. The MC34072PG is identified as an 8-PDIP in a tube, while published comparison information also associates MC34072P with an 8-pin configuration but reports differing packaging details. Confirm the exact footprint, pinout, temperature grade, and suffix against the manufacturer ordering table.
Can MC33072PG replace MC34072PG?
The MC33072PG can be considered only after checking the manufacturer data for voltage range, offset, bias current, slew rate, and pin compatibility. Published replacement discussion identifies MC33072PG as nearly equivalent, but “nearly equivalent” does not establish a guaranteed drop-in replacement for every application. Compare the complete datasheet limits and validate noise, bias current, common-mode range, and output behavior in the target circuit.
What is the best drop-in replacement for MC34072PG?
The closest supported same-family choice is MC34072P, subject to verification of the exact package and suffix rather than assuming interchangeability. Cross-reference search results identify a pin-to-pin Analog Devices option for the broader MC34072 family, but they do not identify a specific qualifying MPN. No unqualified cross-brand drop-in should be selected without reviewing its pinout and electrical limits against the onsemi datasheet.
When should I choose MC34072PG instead of a lower-voltage dual op amp?
Choose MC34072PG when the circuit needs two amplifiers and can benefit from a 3 V to 44 V operating range. Its 4.5 MHz gain-bandwidth product and 13 V/us slew rate are more useful than low-speed precision amplifiers in moderate-bandwidth signal paths. For battery-powered equipment, select a lower-voltage part instead and compare input bias current, noise, and quiescent current.
Is the MC34072PG suitable for 24 V industrial control circuits?
The MC34072PG is suitable for many 24 V industrial control circuits because its listed single-supply operating range extends to 44 V. The design must still provide normal operating margin below the maximum supply and comply with absolute-maximum ratings. Input and output voltage limits, grounding, transient protection, and power dissipation should be checked for each analog signal path.
How much heat can the MC34072PG dissipate in an 8-pin PDIP?
The MC34072PG power dissipation must be calculated from the actual total supply voltage and load current rather than inferred from package type alone. Estimated: use P = (VS - VOUT) × IOUT for each conducting channel and add quiescent dissipation, then compare the result with the datasheet power rating and the expected ambient temperature. The PDIP footprint and copper availability also affect junction temperature.
Does the MC34072PG require JFET input transistors?
No. The MC34072PG uses quality bipolar fabrication and provides fast settling behavior without JFET input-device technology. According to onsemi, this design combines the 4.5 MHz gain-bandwidth product with a 13 V/us slew rate. The bipolar approach should be assessed against the application’s bias-current, noise, offset, and input-capacitance requirements rather than compared solely with JFET input amplifiers.
What can replace MC34072PG?
MC34072P, MC34072VPG, MC33072P, and MC33072PG are same-family candidates to investigate, but the exact suffix and package must match before installation. Cross-reference information describes one pin-to-pin product within the broader MC34072 family from Analog Devices without naming its MPN. Validate pin functions, supply limits, electrical characteristics, and stability against the manufacturer datasheet for any proposed replacement.
Where to buy MC34072PG online and what is the current lead time?
Use the Request a Quote form on this page to request the current MC34072PG unit price, stock position, minimum order quantity, and lead time. The manufacturer page lists the MC34072 family as a standard product and the G suffix as tube-packaged. Current commercial availability can change, so obtain a written quotation for the exact MPN rather than relying on an archived catalog price.
Is MC34072PG RoHS compliant and qualified for automotive use?
The MC34072PG is listed by onsemi as a commercial-temperature general-purpose operational amplifier, but the retrieved product information does not state RoHS, REACH, AEC-Q100, lead-free, or halogen-free status. Treat each compliance field as unknown until the manufacturer’s current declaration or material declaration is obtained. Automotive use also requires confirmation that the exact ordered suffix is qualified for that application.

Data referensi engineering untuk MC34072PG — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MC34072PG when the design requires two general-purpose bipolar amplifiers, a 3 V to 44 V operating range, and a useful combination of 4.5 MHz gain-bandwidth product and 13 V/us slew rate. It is well suited to 24 V industrial control, instrumentation, active filtering, and audio signal conditioning where through-hole assembly is acceptable. MC34072P or MC34072VPG may serve as same-family alternatives when their ordering details match the required PCB and temperature grade. MC33072P or MC33072PG may fit an existing design, but the lower-voltage family requires careful review of supply range, offset, bias current, and output swing. For very low bias current, micropower rail-to-rail inputs, or precision offset requirements, choose a dedicated amplifier family rather than relying on general-purpose compatibility alone.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MC34072P MC34072VPG MC33072P MC33072PG
Brand onsemi onsemi onsemi onsemi onsemi
Package 8-PDIP (0.300, 7.62 mm) 8-PDIP (0.300, 7.62 mm) 8-PDIP (0.300, 7.62 mm) 8-PDIP (0.300, 7.62 mm) 8-PDIP (0.300, 7.62 mm)
Number of Amplifiers 2 2 2 2 2
Output Type Single-ended Single-ended Single-ended Single-ended Single-ended
Input Technology Bipolar, without JFET input technology Bipolar, without JFET input technology Bipolar, without JFET input technology Bipolar Bipolar

Diferensiator Kunci

  • Wide single-supply operating range (vsMC33072P)
  • High slew rate for a general-purpose bipolar dual amplifier (vsMC34072P)
  • Two independent channels in one through-hole package (vsLM2904PWR)
  • Compatibility with the broader MC34072 family (vsMC33072PG)

Catatan Desain

Check both amplifier channels when calculating dissipation because the package contains two amplifiers. Estimated: for each channel, use Pchannel = (VS - VOUT) × IOUT, then add the quiescent contribution from both channels. Compare the total with the datasheet power limit and expected ambient temperature. A 24 V rail at several milliamperes of load can create meaningful heat in an 8-pin PDIP without substantial copper cooling.

Place the supply-bypass capacitor immediately between the V+ and V- pins or close to the package pins on the supply route. Keep each channel’s feedback resistors and compensation components close to their associated amplifier inputs. Maintain separation between the two channels if they process uncorrelated or high-level signals, and provide a solid ground return to reduce common-impedance coupling.

Do not treat the 44 V supply rating as permission to operate without transient protection. Inductive or industrial wiring can introduce spikes above the absolute maximum voltage. Use suitable surge suppression, verify the input common-mode range for single-supply operation, and confirm output swing at the actual load. Also verify whether the selected gain and capacitive loading remain inside the stable operating region shown in the manufacturer documentation.

Keep input and output copper paths physically separated, especially around inverting-input nodes, because those nodes are sensitive to leakage and capacitive coupling. Route the ground return directly to the supply capacitor rather than through the output or feedback section. Use a low-impedance ground plane where possible and minimize exposed trace length around the two amplifier channels.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The retrieved manufacturer and distributor pages do not state the requested compliance declarations. Obtain current onsemi material or product compliance documentation for the exact MC34072PG ordering code.

Pencarian Terkait

MC34072PG datasheet MC34072PG pinout MC34072PG datasheet pdf MC34072PG equivalent MC34072PG drop-in replacement MC34072PG cross reference MC34072PG vs MC33072PG MC34072PG price MC34072PG stock onsemi MC34072PG MC34072 8-PDIP pinout MC34072 application circuit

Komponen dan Istilah Terkait

onsemi MC34072PG MC34072P MC34072VPG MC33072P MC33072PG dual operational amplifier general-purpose amplifier analog integrated circuit semiconductor bipolar input transistor JFET input transistor gain-bandwidth product slew rate input offset voltage single-supply operation split-supply operation 8-PDIP 0.300 inch pitch industrial control sensor signal conditioning active filter audio preamplifier feedback control instrumentation
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ