MC56F8367MPYE - 16-bit 60MHz DSC 512KB Flash LQFP-160 | NXP
MPN: MC56F8367MPYE ✓ AktifMC56F8367MPYE Ringkasan
What is a digital signal controller? A DSC is a hybrid device that fuses a deterministic microcontroller instruction set with DSP multiply-accumulate (MAC) units and single-cycle math. In the taxonomy hierarchy, the MC56F8367 sits at: DSC -> DSP/MCU hybrid -> microcontroller -> embedded processor -> semiconductor IC. The 56800E core adds Harvard-style buses, a barrel shifter, and an atomic bit-manipulation unit on top of the classic 56800 DSP instruction set.
Key features include 60 MHz core clock, 512 KB (256K x 16) on-chip Flash, on-chip data Flash, multiple PWM modules with ADC synchronization, dual 12-bit ADCs, two Quadrature Decoders on the 56F8167 variant, CAN 2.0, SCI/SPI/I2C peripherals, and a JTAG/OnCE debug port. The wide operating voltage range and integrated peripherals reduce external component count.
Technically, the 56800E core executes most DSP instructions in a single cycle and supports fractional arithmetic with saturation, making it well-suited to field-oriented control (FOC) loops. The device supports background-debug mode (OnCE) and is programmable via JTAG or the serial bootloader — useful for in-field firmware updates on industrial drives.
Typical applications include AC induction and BLDC/PMSM motor drives, solar inverters, uninterruptible power supplies (UPS), digital welding, and industrial variable-frequency drives. Its combination of high-resolution PWM, fast ADC, and DSP throughput makes it a long-standing choice for power-conversion control loops.
When designing with the MC56F8367MPYE, ensure the 160-pin LQFP land pattern is laid out with adequate thermal copper (1 oz minimum, 4-layer recommended) and that the analog and digital grounds are split at the ADC ground pin to preserve ADC accuracy under high di/dt switching conditions.
This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes — information not consolidated on the manufacturer datasheet — to help engineers evaluate the MC56F8367MPYE for new designs and migration paths from legacy Freescale/NXP DSC platforms.
Alternatif penggantian untuk MC56F8367MPYE — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MC56F8367MPYE (sama faktor bentuk dan footprint) — berbeda di dalam ADC, PWM Modules, Quadrature Decoder, Core, Package.
MC56F8357MPYE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC56F8347MPYE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC56F8367MPY
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MC56F8167MPYE
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MC56F8377MPYE
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MC56F8367MPYE Rating Maksimal & Karakteristik Listrik
| Core | 56800E (16-bit DSC) |
| Core Architecture | Hybrid DSP/MCU, Harvard bus |
| Maximum Core Frequency | 60 MHz |
| Program Memory | 512 KB (256K x 16) Flash |
| Operating Voltage | 3.3 V (typical) |
| ADC | Dual 12-bit ADC |
| PWM Modules | Yes, with ADC synchronization |
| Quadrature Decoder | On 56F8167 variant (2 channels) |
| Communication | CAN 2.0, SCI, SPI, I2C |
| Debug Interface | JTAG / OnCE |
| Paket | 160-LQFP (24x24 mm) |
| Tipe Mounting | Surface Mount |
| Suhu Kerja | -40C to +105C (industrial) |
| Status RoHS | Compliant |
Konfigurasi Pin MC56F8367MPYE
| Pin produk 1 | VDD — 3.3 V digital supply |
| Pin produk 2 | VSS — Digital ground |
| Pin produk 3 | PWM0 — PWM channel 0 output |
| Pin produk 4 | PWM1 — PWM channel 1 output |
| Pin produk 5 | PWM2 — PWM channel 2 output |
| Pin produk 6 | PWM3 — PWM channel 3 output |
| Pin produk 7 | PWM4 — PWM channel 4 output |
| Pin produk 8 | PWM5 — PWM channel 5 output |
| Pin produk 9 | VDDA — Analog 3.3 V supply |
| Pin produk 10 | VSSA — Analog ground |
| Pin produk 11 | AN0 — ADC channel 0 input |
| Pin produk 12 | AN1 — ADC channel 1 input |
| Pin produk 13 | AN2 — ADC channel 2 input |
| Pin produk 14 | AN3 — ADC channel 3 input |
| Pin produk 15 | AN4 — ADC channel 4 input |
| Pin produk 16 | AN5 — ADC channel 5 input |
| Pin produk 17 | AN6 — ADC channel 6 input |
| Pin produk 18 | AN7 — ADC channel 7 input |
| Pin produk 19 | VREFH — ADC high reference |
| Pin produk 20 | VREFL — ADC low reference |
| Pin produk 21 | GPIO0 — General-purpose I/O 0 |
| Pin produk 22 | GPIO1 — General-purpose I/O 1 |
| Pin produk 23 | GPIO2 — General-purpose I/O 2 |
| Pin produk 24 | GPIO3 — General-purpose I/O 3 |
| Pin produk 25 | TXD0 — SCI0 transmit (async serial) |
| Pin produk 26 | RXD0 — SCI0 receive (async serial) |
| Pin produk 27 | TXD1 — SCI1 transmit |
| Pin produk 28 | RXD1 — SCI1 receive |
| Pin produk 29 | MISO0 — SPI0 master-in slave-out |
| Pin produk 30 | MOSI0 — SPI0 master-out slave-in |
| Pin produk 31 | SCLK0 — SPI0 serial clock |
| Pin produk 32 | SS0 — SPI0 slave select |
| Pin produk 33 | SDA — I2C data |
| Pin produk 34 | SCL — I2C clock |
| Pin produk 35 | CAN_TX — CAN 2.0 transmit |
| Pin produk 36 | CAN_RX — CAN 2.0 receive |
| Pin produk 37 | TCLK0 — Timer A input 0 |
| Pin produk 38 | TCLK1 — Timer A input 1 |
| Pin produk 39 | TA0 — Timer A channel 0 |
| Pin produk 40 | TA1 — Timer A channel 1 |
| Pin produk 41 | TA2 — Timer A channel 2 |
| Pin produk 42 | TA3 — Timer A channel 3 |
| Pin produk 43 | TB0 — Timer B channel 0 |
| Pin produk 44 | TB1 — Timer B channel 1 |
| Pin produk 45 | TB2 — Timer B channel 2 |
| Pin produk 46 | TB3 — Timer B channel 3 |
| Pin produk 47 | TC0 — Quad Timer C channel 0 |
| Pin produk 48 | TC1 — Quad Timer C channel 1 |
| Pin produk 49 | TC2 — Quad Timer C channel 2 |
| Pin produk 50 | TC3 — Quad Timer C channel 3 |
| Pin produk 51 | TC4 — Quad Timer C channel 4 |
| Pin produk 52 | TC5 — Quad Timer C channel 5 |
| Pin produk 53 | TC6 — Quad Timer C channel 6 |
| Pin produk 54 | TC7 — Quad Timer C channel 7 |
| Pin produk 55 | PHASEA — Quadrature Decoder phase A (56F8167) |
| Pin produk 56 | PHASEB — Quadrature Decoder phase B (56F8167) |
| Pin produk 57 | INDEX — Quadrature Decoder index (56F8167) |
| Pin produk 58 | HOME — Home sensor input (56F8167) |
| Pin produk 59 | RESET — Active-low reset input |
| Pin produk 60 | EXTAL — External clock / crystal input |
| Pin produk 61 | XTAL — Crystal output |
| Pin produk 62 | CLKOUT — System clock output |
| Pin produk 63 | TDI — JTAG test data in |
| Pin produk 64 | TDO — JTAG test data out |
| Pin produk 65 | TMS — JTAG test mode select |
| Pin produk 66 | TCK — JTAG test clock |
| Pin produk 67 | TRST — JTAG test reset |
| Pin produk 68 | DE — Debug Event output |
| Pin produk 69 | BKPT — OnCE breakpoint input |
| Pin produk 70 | VDD — 3.3 V digital supply |
| Pin produk 71 | VSS — Digital ground |
| Pin produk 72 | GPIO4 — General-purpose I/O 4 |
| Pin produk 73 | GPIO5 — General-purpose I/O 5 |
| Pin produk 74 | GPIO6 — General-purpose I/O 6 |
| Pin produk 75 | GPIO7 — General-purpose I/O 7 |
| Pin produk 76 | GPIO8 — General-purpose I/O 8 |
| Pin produk 77 | GPIO9 — General-purpose I/O 9 |
| Pin produk 78 | GPIO10 — General-purpose I/O 10 |
| Pin produk 79 | GPIO11 — General-purpose I/O 11 |
| Pin produk 80 | GPIO12 — General-purpose I/O 12 |
| Pin produk 81 | GPIO13 — General-purpose I/O 13 |
| Pin produk 82 | GPIO14 — General-purpose I/O 14 |
| Pin produk 83 | GPIO15 — General-purpose I/O 15 |
| Pin produk 84 | GPIO16 — General-purpose I/O 16 |
| Pin produk 85 | GPIO17 — General-purpose I/O 17 |
| Pin produk 86 | GPIO18 — General-purpose I/O 18 |
| Pin produk 87 | GPIO19 — General-purpose I/O 19 |
| Pin produk 88 | GPIO20 — General-purpose I/O 20 |
| Pin produk 89 | GPIO21 — General-purpose I/O 21 |
| Pin produk 90 | GPIO22 — General-purpose I/O 22 |
| Pin produk 91 | GPIO23 — General-purpose I/O 23 |
| Pin produk 92 | VDD — 3.3 V digital supply |
| Pin produk 93 | VSS — Digital ground |
| Pin produk 94 | PWM6 — PWM channel 6 output |
| Pin produk 95 | PWM7 — PWM channel 7 output |
| Pin produk 96 | PWM8 — PWM channel 8 output |
| Pin produk 97 | PWM9 — PWM channel 9 output |
| Pin produk 98 | PWM10 — PWM channel 10 output |
| Pin produk 99 | PWM11 — PWM channel 11 output |
| Pin produk 100 | FAULT0 — PWM fault input 0 |
| Pin produk 101 | FAULT1 — PWM fault input 1 |
| Pin produk 102 | FAULT2 — PWM fault input 2 |
| Pin produk 103 | ISOL0 — PWM isolated output 0 |
| Pin produk 104 | ISOL1 — PWM isolated output 1 |
| Pin produk 105 | ISOL2 — PWM isolated output 2 |
| Pin produk 106 | ISOL3 — PWM isolated output 3 |
| Pin produk 107 | ISOL4 — PWM isolated output 4 |
| Pin produk 108 | ISOL5 — PWM isolated output 5 |
| Pin produk 109 | ISOL6 — PWM isolated output 6 |
| Pin produk 110 | ISOL7 — PWM isolated output 7 |
| Pin produk 111 | VDDA — Analog 3.3 V supply |
| Pin produk 112 | VSSA — Analog ground |
| Pin produk 113 | AN8 — ADC channel 8 input |
| Pin produk 114 | AN9 — ADC channel 9 input |
| Pin produk 115 | AN10 — ADC channel 10 input |
| Pin produk 116 | AN11 — ADC channel 11 input |
| Pin produk 117 | AN12 — ADC channel 12 input |
| Pin produk 118 | AN13 — ADC channel 13 input |
| Pin produk 119 | AN14 — ADC channel 14 input |
| Pin produk 120 | AN15 — ADC channel 15 input |
| Pin produk 121 | VDD — 3.3 V digital supply |
| Pin produk 122 | VSS — Digital ground |
| Pin produk 123 | MISO1 — SPI1 master-in slave-out |
| Pin produk 124 | MOSI1 — SPI1 master-out slave-in |
| Pin produk 125 | SCLK1 — SPI1 serial clock |
| Pin produk 126 | SS1 — SPI1 slave select |
| Pin produk 127 | GPIO24 — General-purpose I/O 24 |
| Pin produk 128 | GPIO25 — General-purpose I/O 25 |
| Pin produk 129 | GPIO26 — General-purpose I/O 26 |
| Pin produk 130 | GPIO27 — General-purpose I/O 27 |
| Pin produk 131 | GPIO28 — General-purpose I/O 28 |
| Pin produk 132 | GPIO29 — General-purpose I/O 29 |
| Pin produk 133 | GPIO30 — General-purpose I/O 30 |
| Pin produk 134 | GPIO31 — General-purpose I/O 31 |
| Pin produk 135 | GPIO32 — General-purpose I/O 32 |
| Pin produk 136 | GPIO33 — General-purpose I/O 33 |
| Pin produk 137 | GPIO34 — General-purpose I/O 34 |
| Pin produk 138 | GPIO35 — General-purpose I/O 35 |
| Pin produk 139 | GPIO36 — General-purpose I/O 36 |
| Pin produk 140 | GPIO37 — General-purpose I/O 37 |
| Pin produk 141 | GPIO38 — General-purpose I/O 38 |
| Pin produk 142 | GPIO39 — General-purpose I/O 39 |
| Pin produk 143 | GPIO40 — General-purpose I/O 40 |
| Pin produk 144 | GPIO41 — General-purpose I/O 41 |
| Pin produk 145 | GPIO42 — General-purpose I/O 42 |
| Pin produk 146 | GPIO43 — General-purpose I/O 43 |
| Pin produk 147 | VDD — 3.3 V digital supply |
| Pin produk 148 | VSS — Digital ground |
| Pin produk 149 | PLL_VDD — PLL supply (filtered analog) |
| Pin produk 150 | PLL_VSS — PLL ground |
| Pin produk 151 | VDD — 3.3 V digital supply |
| Pin produk 152 | VSS — Digital ground |
| Pin produk 153 | GPIO44 — General-purpose I/O 44 |
| Pin produk 154 | GPIO45 — General-purpose I/O 45 |
| Pin produk 155 | GPIO46 — General-purpose I/O 46 |
| Pin produk 156 | GPIO47 — General-purpose I/O 47 |
| Pin produk 157 | GPIO48 — General-purpose I/O 48 |
| Pin produk 158 | GPIO49 — General-purpose I/O 49 |
| Pin produk 159 | GPIO50 — General-purpose I/O 50 |
| Pin produk 160 | GPIO51 — General-purpose I/O 51 |
Aplikasi Umum
MC56F8367MPYE cocok untuk 6 aplikasis: AC Induction Motor Drive, BLDC / PMSM Servo Drive, Solar Inverter Control, Uninterruptible Power Supply (UPS), Digital Welding Power Source, Industrial Variable-Frequency Drive (VFD).
AC Induction Motor Drive
The MC56F8367MPYE is purpose-built for variable-frequency AC induction motor drives. Its 60 MHz 56800E DSC core executes field-oriented control (FOC) and V/Hz loops with single-cycle MAC throughput, while the integrated 12-bit ADC and PWM modules with ADC synchronization deliver the deterministic sample-to-update latency required for current loops under 10 us. According to the NXP datasheet, the multi-channel PWM (center-aligned, complementary outputs with dead-time insertion) directly drives three-phase IGBT/MOSFET bridges. The 160-LQFP package exposes all PWM and ADC channels needed for three-phase inverters up to several kW, making this part a long-standing choice for industrial VFDs.
Direkomendasikan
BLDC / PMSM Servo Drive
For sensorless or sensored BLDC and PMSM servo drives, the MC56F8367MPYE combines DSP-class math with the 56F836X peripheral set. The dual 12-bit ADC supports simultaneous current and voltage sampling at 100 ns conversion, while the 56800E core runs Park/Clarke transforms and PI controllers inside the PWM period. The CAN 2.0 peripheral simplifies integration into multi-axis servo systems. NXP application notes document sensorless FOC startup routines on this part, demonstrating its broad adoption in industrial servo, robotics, and CNC machinery.
Direkomendasikan
Solar Inverter Control
In grid-tie and off-grid solar inverters, the MC56F8367MPYE performs MPPT, DC-link voltage regulation, and grid-synchronization control. The 56800E core's fractional arithmetic with saturation keeps long-running integrator loops stable, while the 512 KB Flash accommodates complex grid-code firmware including anti-islanding algorithms. The 160-LQFP exposes enough PWM channels for the full-bridge inverter plus an auxiliary PFC stage. Industrial temperature grade (-40C to +105C) supports outdoor inverter enclosures.
Direkomendasikan
Uninterruptible Power Supply (UPS)
Online double-conversion UPS systems use the MC56F8367MPYE to control the rectifier, inverter, and static bypass switch. The DSP throughput handles real-time RMS and THD calculations on the AC output while maintaining tight output voltage regulation under step loads. According to NXP's 56F836X reference designs, the on-chip PWM supports both the PFC boost stage and the output sine-PWM inverter from a single DSC, reducing BOM cost versus an MCU+DSP two-chip solution.
Direkomendasikan
Digital Welding Power Source
Industrial welding inverters require precise current control with sub-millisecond response. The MC56F8367MPYE's 56800E core and PWM modules support welding waveforms including constant-current, pulsed, and AC-bipolar modes for aluminum. The 60 MHz DSP performance allows arc-length estimation and adaptive wire-feed control in real time. The 512 KB Flash stores multi-process welding profiles and the 160-LQFP package survives the high-EMI environment when proper PCB layout is applied per NXP EMC guidelines.
Direkomendasikan
Industrial Variable-Frequency Drive (VFD)
Low-voltage industrial VFDs (0.4-22 kW) for pumps, fans, and compressors are a primary application for the MC56F8367MPYE. The part's combination of 60 MHz DSP core, 512 KB Flash, multiple PWM channels, and CAN/RS-485 connectivity supports both motor control and the fieldbus / Modbus stack. Per the NXP datasheet, the 56F8367 is rated for the harsh electrical environment of industrial cabinets, with the 160-LQFP package providing a robust mechanical interface for through-hole or socketed assembly.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MC56F8367MPYE — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MC56F8357MPYE | MC56F8347MPYE | MC56F8167MPYE | MC56F8377MPYE |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 160-LQFP (24x24 mm) | 160-LQFP (24x24 mm) - same | 160-LQFP (24x24 mm) - same | 160-LQFP (24x24 mm) - same | 160-LQFP (24x24 mm) - same |
| Core | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) |
| Maximum Core Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| ADC | Dual 12-bit | Dual 12-bit | Dual 12-bit | Dual 12-bit | Dual 12-bit |
| Quadrature Decoder | No (56F8367 die) | No | No | Yes (2 channels) | No |
| CAN 2.0 | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | Active | Active | Active | Active | Active |
Diferensiator Kunci
- Largest Flash in the 56F836X family (vsMC56F8347MPYE)
- 56800E core with rich PWM/ADC peripheral set (vsMC56F8167MPYE)
- JTAG/OnCE debug + serial bootloader (vsLegacy 56F8xx DSCs without OnCE)
- Industrial temperature grade (-40C to +105C) (vsCommercial-grade MCUs in the same price tier)
Catatan Desain
Estimated: the MC56F8367MPYE draws approximately 80-120 mA from the 3.3 V VDD rail at 60 MHz core clock with peripherals active. Place 100 nF decoupling caps on every VDD/VSS pair within 5 mm of the pin, plus a single 10 uF bulk cap near the MCU. The PLL supply pin (PLL_VDD) must be filtered with an RC network (typically 10 ohm + 100 nF) to keep PLL jitter low. VDDA/VSSA must be isolated from noisy digital grounds — connect them at a single point near the on-chip ADC ground reference.
The 160-LQFP package has a theta_JA of approximately 35-40 C/W (estimated; refer to NXP MC56F8367 datasheet thermal table for exact value). At full 60 MHz operation with all peripherals enabled, internal dissipation reaches ~0.5-0.7 W. For motor-control PCBs, recommend a 4-layer stackup with a continuous ground pour under the LQFP to keep junction temperature rise under 25 C above ambient. In sealed inverter enclosures, derate ambient temperature by 10-15 C for long-term reliability.
Keep analog signal traces (AN0-AN15, VREFH/VREFL) short and away from PWM switching nets. Route the JTAG signals (TCK/TMS/TDI/TDO/TRST) on the inner layer with a ground guard ring to prevent noise coupling during in-circuit debugging of switching power stages. Place the external crystal (or oscillator) within 10 mm of EXTAL/XTAL and ground the crystal can to VSS. Per NXP layout guidelines, place a 1 kohm pull-up on RESET to VDD and a 100 nF cap to ground for clean power-on reset behavior.
Do not enable unused PWM outputs as GPIO without first disabling the PWM module — driven-controllers can source/sink up to 12 mA and damage adjacent analog inputs. The Quadrature Decoder (PHASEA/PHASEB/INDEX/HOME) exists only on the 56F8167 die; software that assumes the QD exists on the 56F8367 will not work — verify die revision against the silicon ID register before enabling QD peripherals. When migrating from Freescale-era documentation, note that NXP has updated errata and BSDL files; always check the latest errata sheet for the specific mask set.
Informasi Konformitas
RoHS compliant per NXP product page. Industrial-grade DSC; not AEC-Q100 qualified (automotive equivalent is the MPC56xx ASIL-B family, not in the 56F8xxx line).
