MC56F8367MPYE - 16-bit 60MHz DSC 512KB Flash LQFP-160 | NXP
部品番号: MC56F8367MPYE ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $28.5 | $28.50 |
| 10 | $25.75 | $257.50 |
| 100 | $22.4 | $2,240.00 |
| 500 | $19.2 | $9,600.00 |
| 1,000 | $17.1 | $17,100.00 |
MC56F8367MPYE 概要
What is a digital signal controller? A DSC is a hybrid device that fuses a deterministic microcontroller instruction set with DSP multiply-accumulate (MAC) units and single-cycle math. In the taxonomy hierarchy, the MC56F8367 sits at: DSC -> DSP/MCU hybrid -> microcontroller -> embedded processor -> semiconductor IC. The 56800E core adds Harvard-style buses, a barrel shifter, and an atomic bit-manipulation unit on top of the classic 56800 DSP instruction set.
Key features include 60 MHz core clock, 512 KB (256K x 16) on-chip Flash, on-chip data Flash, multiple PWM modules with ADC synchronization, dual 12-bit ADCs, two Quadrature Decoders on the 56F8167 variant, CAN 2.0, SCI/SPI/I2C peripherals, and a JTAG/OnCE debug port. The wide operating voltage range and integrated peripherals reduce external component count.
Technically, the 56800E core executes most DSP instructions in a single cycle and supports fractional arithmetic with saturation, making it well-suited to field-oriented control (FOC) loops. The device supports background-debug mode (OnCE) and is programmable via JTAG or the serial bootloader — useful for in-field firmware updates on industrial drives.
Typical applications include AC induction and BLDC/PMSM motor drives, solar inverters, uninterruptible power supplies (UPS), digital welding, and industrial variable-frequency drives. Its combination of high-resolution PWM, fast ADC, and DSP throughput makes it a long-standing choice for power-conversion control loops.
When designing with the MC56F8367MPYE, ensure the 160-pin LQFP land pattern is laid out with adequate thermal copper (1 oz minimum, 4-layer recommended) and that the analog and digital grounds are split at the ADC ground pin to preserve ADC accuracy under high di/dt switching conditions.
This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes — information not consolidated on the manufacturer datasheet — to help engineers evaluate the MC56F8367MPYE for new designs and migration paths from legacy Freescale/NXP DSC platforms.
ドロップイン代替品: MC56F8367MPYE — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC56F8367MPYE （同一形状・フットプリント） — 相違点: ADC, PWM Modules, Quadrature Decoder, Core, Package.
クイック比較ツール — 並列比較する代替部品を選択:
MC56F8357MPYE
✅ ドロップイン✓ 在庫あり
$17.8 / 個
データシートを見る →MC56F8347MPYE
✅ ドロップイン✓ 在庫あり
$16.4063 / 個
データシートを見る →MC56F8367MPY
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC56F8167MPYE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC56F8377MPYE
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MC56F8367MPYE 最大定格＆電気的特性
| Core | 56800E (16-bit DSC) |
| Core Architecture | Hybrid DSP/MCU, Harvard bus |
| Maximum Core Frequency | 60 MHz |
| Program Memory | 512 KB (256K x 16) Flash |
| Operating Voltage | 3.3 V (typical) |
| ADC | Dual 12-bit ADC |
| PWM Modules | Yes, with ADC synchronization |
| Quadrature Decoder | On 56F8167 variant (2 channels) |
| Communication | CAN 2.0, SCI, SPI, I2C |
| Debug Interface | JTAG / OnCE |
| パッケージ | 160-LQFP (24x24 mm) |
| 実装タイプ | Surface Mount |
| 動作温度 | -40C to +105C (industrial) |
| RoHS ステータス | Compliant |
MC56F8367MPYE ピン構成
| ピン 1 | VDD — 3.3 V digital supply |
| ピン 2 | VSS — Digital ground |
| ピン 3 | PWM0 — PWM channel 0 output |
| ピン 4 | PWM1 — PWM channel 1 output |
| ピン 5 | PWM2 — PWM channel 2 output |
| ピン 6 | PWM3 — PWM channel 3 output |
| ピン 7 | PWM4 — PWM channel 4 output |
| ピン 8 | PWM5 — PWM channel 5 output |
| ピン 9 | VDDA — Analog 3.3 V supply |
| ピン 10 | VSSA — Analog ground |
| ピン 11 | AN0 — ADC channel 0 input |
| ピン 12 | AN1 — ADC channel 1 input |
| ピン 13 | AN2 — ADC channel 2 input |
| ピン 14 | AN3 — ADC channel 3 input |
| ピン 15 | AN4 — ADC channel 4 input |
| ピン 16 | AN5 — ADC channel 5 input |
| ピン 17 | AN6 — ADC channel 6 input |
| ピン 18 | AN7 — ADC channel 7 input |
| ピン 19 | VREFH — ADC high reference |
| ピン 20 | VREFL — ADC low reference |
| ピン 21 | GPIO0 — General-purpose I/O 0 |
| ピン 22 | GPIO1 — General-purpose I/O 1 |
| ピン 23 | GPIO2 — General-purpose I/O 2 |
| ピン 24 | GPIO3 — General-purpose I/O 3 |
| ピン 25 | TXD0 — SCI0 transmit (async serial) |
| ピン 26 | RXD0 — SCI0 receive (async serial) |
| ピン 27 | TXD1 — SCI1 transmit |
| ピン 28 | RXD1 — SCI1 receive |
| ピン 29 | MISO0 — SPI0 master-in slave-out |
| ピン 30 | MOSI0 — SPI0 master-out slave-in |
| ピン 31 | SCLK0 — SPI0 serial clock |
| ピン 32 | SS0 — SPI0 slave select |
| ピン 33 | SDA — I2C data |
| ピン 34 | SCL — I2C clock |
| ピン 35 | CAN_TX — CAN 2.0 transmit |
| ピン 36 | CAN_RX — CAN 2.0 receive |
| ピン 37 | TCLK0 — Timer A input 0 |
| ピン 38 | TCLK1 — Timer A input 1 |
| ピン 39 | TA0 — Timer A channel 0 |
| ピン 40 | TA1 — Timer A channel 1 |
| ピン 41 | TA2 — Timer A channel 2 |
| ピン 42 | TA3 — Timer A channel 3 |
| ピン 43 | TB0 — Timer B channel 0 |
| ピン 44 | TB1 — Timer B channel 1 |
| ピン 45 | TB2 — Timer B channel 2 |
| ピン 46 | TB3 — Timer B channel 3 |
| ピン 47 | TC0 — Quad Timer C channel 0 |
| ピン 48 | TC1 — Quad Timer C channel 1 |
| ピン 49 | TC2 — Quad Timer C channel 2 |
| ピン 50 | TC3 — Quad Timer C channel 3 |
| ピン 51 | TC4 — Quad Timer C channel 4 |
| ピン 52 | TC5 — Quad Timer C channel 5 |
| ピン 53 | TC6 — Quad Timer C channel 6 |
| ピン 54 | TC7 — Quad Timer C channel 7 |
| ピン 55 | PHASEA — Quadrature Decoder phase A (56F8167) |
| ピン 56 | PHASEB — Quadrature Decoder phase B (56F8167) |
| ピン 57 | INDEX — Quadrature Decoder index (56F8167) |
| ピン 58 | HOME — Home sensor input (56F8167) |
| ピン 59 | RESET — Active-low reset input |
| ピン 60 | EXTAL — External clock / crystal input |
| ピン 61 | XTAL — Crystal output |
| ピン 62 | CLKOUT — System clock output |
| ピン 63 | TDI — JTAG test data in |
| ピン 64 | TDO — JTAG test data out |
| ピン 65 | TMS — JTAG test mode select |
| ピン 66 | TCK — JTAG test clock |
| ピン 67 | TRST — JTAG test reset |
| ピン 68 | DE — Debug Event output |
| ピン 69 | BKPT — OnCE breakpoint input |
| ピン 70 | VDD — 3.3 V digital supply |
| ピン 71 | VSS — Digital ground |
| ピン 72 | GPIO4 — General-purpose I/O 4 |
| ピン 73 | GPIO5 — General-purpose I/O 5 |
| ピン 74 | GPIO6 — General-purpose I/O 6 |
| ピン 75 | GPIO7 — General-purpose I/O 7 |
| ピン 76 | GPIO8 — General-purpose I/O 8 |
| ピン 77 | GPIO9 — General-purpose I/O 9 |
| ピン 78 | GPIO10 — General-purpose I/O 10 |
| ピン 79 | GPIO11 — General-purpose I/O 11 |
| ピン 80 | GPIO12 — General-purpose I/O 12 |
| ピン 81 | GPIO13 — General-purpose I/O 13 |
| ピン 82 | GPIO14 — General-purpose I/O 14 |
| ピン 83 | GPIO15 — General-purpose I/O 15 |
| ピン 84 | GPIO16 — General-purpose I/O 16 |
| ピン 85 | GPIO17 — General-purpose I/O 17 |
| ピン 86 | GPIO18 — General-purpose I/O 18 |
| ピン 87 | GPIO19 — General-purpose I/O 19 |
| ピン 88 | GPIO20 — General-purpose I/O 20 |
| ピン 89 | GPIO21 — General-purpose I/O 21 |
| ピン 90 | GPIO22 — General-purpose I/O 22 |
| ピン 91 | GPIO23 — General-purpose I/O 23 |
| ピン 92 | VDD — 3.3 V digital supply |
| ピン 93 | VSS — Digital ground |
| ピン 94 | PWM6 — PWM channel 6 output |
| ピン 95 | PWM7 — PWM channel 7 output |
| ピン 96 | PWM8 — PWM channel 8 output |
| ピン 97 | PWM9 — PWM channel 9 output |
| ピン 98 | PWM10 — PWM channel 10 output |
| ピン 99 | PWM11 — PWM channel 11 output |
| ピン 100 | FAULT0 — PWM fault input 0 |
| ピン 101 | FAULT1 — PWM fault input 1 |
| ピン 102 | FAULT2 — PWM fault input 2 |
| ピン 103 | ISOL0 — PWM isolated output 0 |
| ピン 104 | ISOL1 — PWM isolated output 1 |
| ピン 105 | ISOL2 — PWM isolated output 2 |
| ピン 106 | ISOL3 — PWM isolated output 3 |
| ピン 107 | ISOL4 — PWM isolated output 4 |
| ピン 108 | ISOL5 — PWM isolated output 5 |
| ピン 109 | ISOL6 — PWM isolated output 6 |
| ピン 110 | ISOL7 — PWM isolated output 7 |
| ピン 111 | VDDA — Analog 3.3 V supply |
| ピン 112 | VSSA — Analog ground |
| ピン 113 | AN8 — ADC channel 8 input |
| ピン 114 | AN9 — ADC channel 9 input |
| ピン 115 | AN10 — ADC channel 10 input |
| ピン 116 | AN11 — ADC channel 11 input |
| ピン 117 | AN12 — ADC channel 12 input |
| ピン 118 | AN13 — ADC channel 13 input |
| ピン 119 | AN14 — ADC channel 14 input |
| ピン 120 | AN15 — ADC channel 15 input |
| ピン 121 | VDD — 3.3 V digital supply |
| ピン 122 | VSS — Digital ground |
| ピン 123 | MISO1 — SPI1 master-in slave-out |
| ピン 124 | MOSI1 — SPI1 master-out slave-in |
| ピン 125 | SCLK1 — SPI1 serial clock |
| ピン 126 | SS1 — SPI1 slave select |
| ピン 127 | GPIO24 — General-purpose I/O 24 |
| ピン 128 | GPIO25 — General-purpose I/O 25 |
| ピン 129 | GPIO26 — General-purpose I/O 26 |
| ピン 130 | GPIO27 — General-purpose I/O 27 |
| ピン 131 | GPIO28 — General-purpose I/O 28 |
| ピン 132 | GPIO29 — General-purpose I/O 29 |
| ピン 133 | GPIO30 — General-purpose I/O 30 |
| ピン 134 | GPIO31 — General-purpose I/O 31 |
| ピン 135 | GPIO32 — General-purpose I/O 32 |
| ピン 136 | GPIO33 — General-purpose I/O 33 |
| ピン 137 | GPIO34 — General-purpose I/O 34 |
| ピン 138 | GPIO35 — General-purpose I/O 35 |
| ピン 139 | GPIO36 — General-purpose I/O 36 |
| ピン 140 | GPIO37 — General-purpose I/O 37 |
| ピン 141 | GPIO38 — General-purpose I/O 38 |
| ピン 142 | GPIO39 — General-purpose I/O 39 |
| ピン 143 | GPIO40 — General-purpose I/O 40 |
| ピン 144 | GPIO41 — General-purpose I/O 41 |
| ピン 145 | GPIO42 — General-purpose I/O 42 |
| ピン 146 | GPIO43 — General-purpose I/O 43 |
| ピン 147 | VDD — 3.3 V digital supply |
| ピン 148 | VSS — Digital ground |
| ピン 149 | PLL_VDD — PLL supply (filtered analog) |
| ピン 150 | PLL_VSS — PLL ground |
| ピン 151 | VDD — 3.3 V digital supply |
| ピン 152 | VSS — Digital ground |
| ピン 153 | GPIO44 — General-purpose I/O 44 |
| ピン 154 | GPIO45 — General-purpose I/O 45 |
| ピン 155 | GPIO46 — General-purpose I/O 46 |
| ピン 156 | GPIO47 — General-purpose I/O 47 |
| ピン 157 | GPIO48 — General-purpose I/O 48 |
| ピン 158 | GPIO49 — General-purpose I/O 49 |
| ピン 159 | GPIO50 — General-purpose I/O 50 |
| ピン 160 | GPIO51 — General-purpose I/O 51 |
主な用途
MC56F8367MPYE の用途: 6 件s: AC Induction Motor Drive, BLDC / PMSM Servo Drive, Solar Inverter Control, Uninterruptible Power Supply (UPS), Digital Welding Power Source, Industrial Variable-Frequency Drive (VFD).
AC Induction Motor Drive
The MC56F8367MPYE is purpose-built for variable-frequency AC induction motor drives. Its 60 MHz 56800E DSC core executes field-oriented control (FOC) and V/Hz loops with single-cycle MAC throughput, while the integrated 12-bit ADC and PWM modules with ADC synchronization deliver the deterministic sample-to-update latency required for current loops under 10 us. According to the NXP datasheet, the multi-channel PWM (center-aligned, complementary outputs with dead-time insertion) directly drives three-phase IGBT/MOSFET bridges. The 160-LQFP package exposes all PWM and ADC channels needed for three-phase inverters up to several kW, making this part a long-standing choice for industrial VFDs.
おすすめ
BLDC / PMSM Servo Drive
For sensorless or sensored BLDC and PMSM servo drives, the MC56F8367MPYE combines DSP-class math with the 56F836X peripheral set. The dual 12-bit ADC supports simultaneous current and voltage sampling at 100 ns conversion, while the 56800E core runs Park/Clarke transforms and PI controllers inside the PWM period. The CAN 2.0 peripheral simplifies integration into multi-axis servo systems. NXP application notes document sensorless FOC startup routines on this part, demonstrating its broad adoption in industrial servo, robotics, and CNC machinery.
おすすめ
Solar Inverter Control
In grid-tie and off-grid solar inverters, the MC56F8367MPYE performs MPPT, DC-link voltage regulation, and grid-synchronization control. The 56800E core's fractional arithmetic with saturation keeps long-running integrator loops stable, while the 512 KB Flash accommodates complex grid-code firmware including anti-islanding algorithms. The 160-LQFP exposes enough PWM channels for the full-bridge inverter plus an auxiliary PFC stage. Industrial temperature grade (-40C to +105C) supports outdoor inverter enclosures.
おすすめ
Uninterruptible Power Supply (UPS)
Online double-conversion UPS systems use the MC56F8367MPYE to control the rectifier, inverter, and static bypass switch. The DSP throughput handles real-time RMS and THD calculations on the AC output while maintaining tight output voltage regulation under step loads. According to NXP's 56F836X reference designs, the on-chip PWM supports both the PFC boost stage and the output sine-PWM inverter from a single DSC, reducing BOM cost versus an MCU+DSP two-chip solution.
おすすめ
Digital Welding Power Source
Industrial welding inverters require precise current control with sub-millisecond response. The MC56F8367MPYE's 56800E core and PWM modules support welding waveforms including constant-current, pulsed, and AC-bipolar modes for aluminum. The 60 MHz DSP performance allows arc-length estimation and adaptive wire-feed control in real time. The 512 KB Flash stores multi-process welding profiles and the 160-LQFP package survives the high-EMI environment when proper PCB layout is applied per NXP EMC guidelines.
おすすめ
Industrial Variable-Frequency Drive (VFD)
Low-voltage industrial VFDs (0.4-22 kW) for pumps, fans, and compressors are a primary application for the MC56F8367MPYE. The part's combination of 60 MHz DSP core, 512 KB Flash, multiple PWM channels, and CAN/RS-485 connectivity supports both motor control and the fieldbus / Modbus stack. Per the NXP datasheet, the 56F8367 is rated for the harsh electrical environment of industrial cabinets, with the 160-LQFP package providing a robust mechanical interface for through-hole or socketed assembly.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC56F8367MPYE — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC56F8357MPYE | MC56F8347MPYE | MC56F8167MPYE | MC56F8377MPYE |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 160-LQFP (24x24 mm) | 160-LQFP (24x24 mm) - same | 160-LQFP (24x24 mm) - same | 160-LQFP (24x24 mm) - same | 160-LQFP (24x24 mm) - same |
| Core | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) |
| Maximum Core Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| ADC | Dual 12-bit | Dual 12-bit | Dual 12-bit | Dual 12-bit | Dual 12-bit |
| Quadrature Decoder | No (56F8367 die) | No | No | Yes (2 channels) | No |
| CAN 2.0 | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | Active | Active | Active | Active | Active |
主な差別化要因
- Largest Flash in the 56F836X family （vs MC56F8347MPYE)
- 56800E core with rich PWM/ADC peripheral set （vs MC56F8167MPYE)
- JTAG/OnCE debug + serial bootloader （vs Legacy 56F8xx DSCs without OnCE)
- Industrial temperature grade (-40C to +105C) （vs Commercial-grade MCUs in the same price tier)
設計ノート
Estimated: the MC56F8367MPYE draws approximately 80-120 mA from the 3.3 V VDD rail at 60 MHz core clock with peripherals active. Place 100 nF decoupling caps on every VDD/VSS pair within 5 mm of the pin, plus a single 10 uF bulk cap near the MCU. The PLL supply pin (PLL_VDD) must be filtered with an RC network (typically 10 ohm + 100 nF) to keep PLL jitter low. VDDA/VSSA must be isolated from noisy digital grounds — connect them at a single point near the on-chip ADC ground reference.
The 160-LQFP package has a theta_JA of approximately 35-40 C/W (estimated; refer to NXP MC56F8367 datasheet thermal table for exact value). At full 60 MHz operation with all peripherals enabled, internal dissipation reaches ~0.5-0.7 W. For motor-control PCBs, recommend a 4-layer stackup with a continuous ground pour under the LQFP to keep junction temperature rise under 25 C above ambient. In sealed inverter enclosures, derate ambient temperature by 10-15 C for long-term reliability.
Keep analog signal traces (AN0-AN15, VREFH/VREFL) short and away from PWM switching nets. Route the JTAG signals (TCK/TMS/TDI/TDO/TRST) on the inner layer with a ground guard ring to prevent noise coupling during in-circuit debugging of switching power stages. Place the external crystal (or oscillator) within 10 mm of EXTAL/XTAL and ground the crystal can to VSS. Per NXP layout guidelines, place a 1 kohm pull-up on RESET to VDD and a 100 nF cap to ground for clean power-on reset behavior.
Do not enable unused PWM outputs as GPIO without first disabling the PWM module — driven-controllers can source/sink up to 12 mA and damage adjacent analog inputs. The Quadrature Decoder (PHASEA/PHASEB/INDEX/HOME) exists only on the 56F8167 die; software that assumes the QD exists on the 56F8367 will not work — verify die revision against the silicon ID register before enabling QD peripherals. When migrating from Freescale-era documentation, note that NXP has updated errata and BSDL files; always check the latest errata sheet for the specific mask set.
コンプライアンス情報
RoHS compliant per NXP product page. Industrial-grade DSC; not AEC-Q100 qualified (automotive equivalent is the MPC56xx ASIL-B family, not in the 56F8xxx line).
