Microchip Technology

MCP6021-I/ST - 10MHz RRIO Op Amp | Microchip Technology

MPN: MCP6021-I/ST ✓ Aktif
Less than 0.5 mV Vdss 1.0 mA Id 8-pin TSSOP Package
MOQ: 1 |

MCP6021-I/ST Ringkasan

The Microchip Technology MCP6021-I/ST is a single operational amplifier with a 10 MHz gain-bandwidth product, typical operating current of 1.0 mA, and typical input offset voltage below 0.5 mV, packaged in an 8-pin TSSOP. Rail-to-rail input and output operation makes the device useful across low-voltage signal chains where input and output swing limitations must be minimized.

An operational amplifier, commonly called an op amp, is a voltage-feedback amplifier used to amplify, buffer, filter, compare, and control analog signals. Within the broader semiconductor hierarchy, the MCP6021-I/ST belongs to the operational-amplifier class of amplifier ICs. Its low-power design and moderate bandwidth provide a practical balance between signal responsiveness, low bias current, and compact implementation.

The principal performance attributes include a 10 MHz gain-bandwidth product, rail-to-rail input and output capability, an input bias current specified at 1 pA, and an operating current of 1.0 mA. The low input bias current is particularly useful with high-impedance sensors because it limits the error caused by bias current flowing through the source impedance. The low offset voltage supports accurate amplification around the input common-mode voltage.

In voltage-feedback operation, closed-loop bandwidth depends on the selected noise gain. At a noise gain of 1, the 10 MHz gain-bandwidth product supports substantially wider signal bandwidth than at higher closed-loop gains. Rail-to-rail input capability broadens the usable common-mode range, while rail-to-rail output operation helps the amplifier approach its supply rails under suitable output-load conditions. Designers should still evaluate output drive, load, stability, and operating conditions from the manufacturer datasheet.

Typical applications include low-power sensor conditioning, battery-powered instrumentation, audio and communication interfaces, analog signal buffering, active filtering, and general-purpose analog control. Its 1.0 mA operating current is advantageous in portable systems, while the 8-pin TSSOP package supports compact, surface-mount PCB layouts.

For reliable circuit implementation, keep input and feedback paths short, place compensation and decoupling components close to the device pins, and verify the selected gain against the datasheet stability and bandwidth information. Decoupling capacitance and voltage-headroom requirements must follow the manufacturer guidance rather than being inferred from the package alone.

This page combines manufacturer specifications, package information, sourcing data, replacement analysis, comparison tables, and practical application guidance. It also identifies where a same-footprint substitution requires validation of offset, bandwidth, operating current, temperature grade, and electrical limits before production use.

Alternatif penggantian untuk MCP6021-I/ST — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MCP6021-I/ST (sama faktor bentuk dan footprint) — berbeda di dalam Amplifier Type, Package, Typical Operating Current.

Microchip Technology
Amplifier Type: Dual general-purpose operational amplifier
Package: 8-lead TSSOP
Typical Operating Current: 1.0 mA per amplifier

MCP6021-E/ST

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 8-TSSOP
Single operational amplifier · Voltage-feedback CMOS operational amplifier · 1 circuit · 10 MHz · 2.5 V to 5.5 V · 1.0 mA · Less than 0.5 mV · Low bias current

Kontak untuk harga

Lihat Datasheet →

MCP6022-I/ST

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 8-TSSOP
Dual general-purpose operational amplifier · 2 amplifiers · 10 MHz · 1.0 mA per amplifier · Less than 1.35 mA per amplifier · Less than 0.5 mV · 2.5 V · Rail-to-rail

Kontak untuk harga

Lihat Datasheet →

MCP6023-I/ST

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-TSSOP
Same 10 MHz family bandwidth and 8-pin TSSOP footprint; input-offset grade is higher than MCP6021, whose typical offset is below 0.5 mV.

📋 Alternatif referensi (tidak dalam katalog)

MCP6024-I/ST

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-TSSOP
Same 10 MHz family bandwidth and 8-pin TSSOP footprint; input-offset grade is higher than MCP6021, whose typical offset is below 0.5 mV.

📋 Alternatif referensi (tidak dalam katalog)

MCP6022-E/ST

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-TSSOP
Same 10 MHz family bandwidth and 8-pin TSSOP footprint; differs in offset grade and temperature-grade ordering code.

📋 Alternatif referensi (tidak dalam katalog)

MCP6023-E/ST

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-TSSOP
Same 10 MHz family bandwidth and 8-pin TSSOP footprint; differs in offset grade and temperature-grade ordering code.

📋 Alternatif referensi (tidak dalam katalog)

MCP6021-I/ST Rating Maksimal & Karakteristik Listrik

Amplifier Type Single operational amplifier
Gain-Bandwidth Product 10 MHz
Typical Operating Current 1.0 mA
Typical Input Offset Voltage Less than 0.5 mV
Input Bias Current 1 pA
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Number of Circuits 1 circuit
Paket 8-pin TSSOP
Package Width 4.40 mm
Tipe Mounting Surface mount
Status RoHS RoHS

MCP6021-I/ST 4.40 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk MCP6021-I/ST (4.40 mm pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 4.40 mm untuk MCP6021-I/ST

Tidak ada data diatribut pin yang tersedia untuk MCP6021-I/ST.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MCP6021-I/ST cocok untuk 6 aplikasis: Battery-Powered Sensor Conditioning, Portable Audio Signal Interface, Active Analog Filtering, Industrial Instrumentation Buffer, Communication Interface Buffer, Precision DC Signal Amplification.

📱

Battery-Powered Sensor Conditioning

The MCP6021-I/ST fits low-power sensor front ends because its 1.0 mA typical operating current limits system overhead while the 1 pA input bias current reduces the error produced across a high-impedance sensor. Its rail-to-rail input also helps process signals near the supply range in compact, low-energy equipment. Use it as a voltage follower or noninverting amplifier ahead of an ADC, checking the sensor impedance, leakage, noise, and the amplifier's offset and stability requirements.

🎧

Portable Audio Signal Interface

MCP6021-I/ST can condition low-level audio or communications signals in portable equipment while consuming only 1.0 mA typical operating current. Rail-to-rail input and output behavior provides useful signal-headroom flexibility in low-voltage systems, while the 10 MHz gain-bandwidth product supports moderate-bandwidth amplification. The device can buffer a microphone or line-level stage, although output loading, distortion, noise, and stability should be checked at the selected closed-loop gain.

⚡

Active Analog Filtering

The 10 MHz gain-bandwidth product makes MCP6021-I/ST suitable for active filters handling signals below the closed-loop bandwidth permitted by the selected topology. Its 1.0 mA operating current is useful in portable measurement systems, and the low input bias current reduces loading of high-impedance filter stages. Component tolerances, gain-bandwidth behavior, output drive, and noise must be evaluated together, especially near the amplifier's upper bandwidth where stability can become more sensitive.

🏭

Industrial Instrumentation Buffer

MCP6021-I/ST is appropriate for buffering sensor and measurement signals where compact implementation and low current are valuable. Its listed 1 pA input bias current minimizes interaction with high-impedance sources, while rail-to-rail input operation accommodates signals across much of the available common-mode range. The 8-pin TSSOP package supports compact industrial control boards, but designers should verify the exact I/ST temperature limits, supply range, ESD requirements, and long-term calibration behavior.

🌐

Communication Interface Buffer

MCP6021-I/ST can provide low-power buffering for communication front ends operating from a limited supply budget. The 10 MHz gain-bandwidth product covers many moderate-speed signal-conditioning paths, and the 1.0 mA operating current is valuable in battery-backed links. Use the amplifier where its input capacitance, output drive, noise, and common-mode limits are acceptable. High-speed or long-trace interfaces may require separate analysis for bandwidth, impedance, ringing, and EMC behavior.

🔧

Precision DC Signal Amplification

MCP6021-I/ST is suitable for low-level DC amplification because the manufacturer identifies a typical input offset voltage below 0.5 mV and a 1 pA input bias current. These characteristics reduce errors when processing outputs from strain gauges, temperature sensors, and other high-impedance transducers. Its 10 MHz bandwidth leaves ample speed for many precision DC paths, although accuracy also depends on resistor matching, input-referred noise, temperature drift, bias-current return path, and power-supply rejection.

Ringkasan Produk Direkomendasikan

MCP602 Related family amplifier for signal-conditioning designs Digunakan di dalam: Battery-Powered Sensor Conditioning, Active Analog Filtering, Industrial Instrumentation Buffer MCP601 Same Microchip operational-amplifier family Digunakan di dalam: Battery-Powered Sensor Conditioning, Active Analog Filtering, Communication Interface Buffer MCP603 Same Microchip operational-amplifier family Digunakan di dalam: Portable Audio Signal Interface, Industrial Instrumentation Buffer MCP604 Same Microchip operational-amplifier family Digunakan di dalam: Portable Audio Signal Interface, Communication Interface Buffer MCP6022 Same Microchip family with a different offset grade Digunakan di dalam: Precision DC Signal Amplification MCP6021 Base MPN of the selected amplifier family Digunakan di dalam: Precision DC Signal Amplification
What is the MCP6021-I/ST?
The MCP6021-I/ST is a single, rail-to-rail input and output operational amplifier from Microchip Technology with a 10 MHz gain-bandwidth product and 1.0 mA typical operating current. According to the manufacturer product page, it also provides an input offset voltage below 0.5 mV and low bias current. The device is offered in an 8-pin TSSOP package for compact surface-mount analog circuits.
What are the key specifications of MCP6021-I/ST?
The key MCP6021-I/ST specifications include a 10 MHz gain-bandwidth product, 1.0 mA typical operating current, less than 0.5 mV typical input offset voltage, 1 pA input bias current, and rail-to-rail input and output operation. According to the Microchip Technology MCP6021 product page, the amplifier is a single-circuit device in an 8-pin TSSOP package. These characteristics suit low-power, high-input-impedance signal-conditioning applications.
Where can I download the MCP6021 datasheet PDF?
The MCP6021 datasheet and supporting technical information are available from the official Microchip Technology product page at https://www.microchip.com/en-us/product/MCP6021. The manufacturer page describes the 10 MHz gain-bandwidth product and 1.0 mA typical operating current. Use the electrical-characteristics and package-drawing sections of the manufacturer datasheet for final design limits, ordering information, and test conditions.
Where can I find the MCP6021-I/ST pinout?
The MCP6021-I/ST pinout is found in the pin-configuration diagram of the Microchip Technology MCP6021 datasheet. The target orderable device is identified in the distributor data as an 8-pin TSSOP operational amplifier. Before assigning PCB nets, verify pin names and numbering directly against the manufacturer pin diagram and distinguish NC pins from functional power, input, output, and feedback connections.
Is the MCP6021-I/ST a rail-to-rail input and output op amp?
Yes, the MCP6021-I/ST provides rail-to-rail input and output operation. According to the Microchip Technology product page, this family is designed for general-purpose low-power signal conditioning. Rail-to-rail input behavior improves flexibility when the input signal approaches either supply rail, while rail-to-rail output reduces the restriction between the output range and supply voltage.
How much current does the MCP6021-I/ST typically consume?
The MCP6021-I/ST has a typical operating current of 1.0 mA. According to the Microchip Technology product page, this low current complements the family's 10 MHz gain-bandwidth product and makes the amplifier relevant to portable and low-power instrumentation. The exact current varies with supply voltage, device variant, and operating conditions, so use the manufacturer electrical-characteristics table for worst-case design limits.
What is the input bias current of MCP6021-I/ST?
The MCP6021-I/ST is listed with an input bias current of 1 pA. The Microchip Technology MCP6021 product page identifies low bias current as a key family characteristic. This low value is useful when the amplifier senses a high-impedance source because the bias-current-induced voltage error across that source is reduced. Confirm the full test conditions in the manufacturer datasheet.
Is MCP6021-I/ST suitable for high-impedance sensor conditioning?
Yes, MCP6021-I/ST is well suited to many high-impedance sensor-conditioning stages because its listed input bias current is 1 pA and its typical input offset voltage is below 0.5 mV. According to the Microchip Technology product page, these low-error characteristics support precision amplification of weak sensor signals. The sensor source impedance, leakage, noise, and required bandwidth should also be evaluated.
What is the best drop-in replacement for MCP6021-I/ST?
The closest same-footprint options are the MCP6022-I/ST, MCP6023-I/ST, and MCP6024-I/ST from the same operational-amplifier family, subject to offset-voltage and application requirements. MCP6021-E/ST is another temperature-grade option in the same TSSOP footprint. No cross-brand equivalent was established from the available cross-reference results, so validate every substitution against the complete electrical and stability specifications.
Can MCP6022-I/ST replace MCP6021-I/ST?
MCP6022-I/ST can serve as a same-package MCP6021-I/ST alternative when its offset-voltage and other electrical limits meet the circuit requirements. Both parts use the 8-pin TSSOP format, but the family variants have different offset-voltage grades. Confirm pin functions, supply range, common-mode range, output swing, stability, temperature grade, and lifecycle status in the manufacturer documentation before substitution.
What is the difference between MCP6021-I/ST and MCP6021-E/ST?
The principal ordering-code distinction between MCP6021-I/ST and MCP6021-E/ST is their temperature-grade designation, while both are 8-pin TSSOP versions of the MCP6021 family. The I/ST version is the industrial-grade orderable device associated with the target part, whereas the E/ST version represents the extended-temperature-grade ordering option. Confirm the exact limits and intended application in Microchip's ordering information.
MCP6021-I/ST vs MCP6024-I/ST: which is better for precision DC amplification?
MCP6021-I/ST is generally the better starting point for precision DC amplification because the manufacturer highlights a typical input offset voltage below 0.5 mV for the MCP6021 family. MCP6024-I/ST belongs to the same 8-pin TSSOP family but is associated with a wider input-offset-voltage grade. Choose based on the required offset limit, noise, bias current, bandwidth, and exact operating conditions.
When should I choose MCP6021-I/ST instead of MCP6024-I/ST?
Choose MCP6021-I/ST when the circuit requires the lower-offset MCP6021 family grade and can operate within its specified temperature and supply limits. MCP6024-I/ST may be considered when its documented offset and electrical characteristics satisfy the design and procurement requirements. Both use the 8-pin TSSOP package, but matching the package alone does not establish functional interchangeability.
Where can I buy MCP6021-I/ST and check its lead time?
Use the Request a Quote form on this page to ask about MCP6021-I/ST availability, current lead time, minimum order quantity, and shipment details. The verified listing identifies the exact 8-pin TSSOP orderable device and shows inventory at the time of retrieval, but stock levels can change. A quotation request provides the most current commercial answer for the exact MPN and packaging code.
Is MCP6021-I/ST in stock?
MCP6021-I/ST was listed as in stock with 4,832 pieces at the time of retrieval, but inventory is time-sensitive and does not establish future availability. Use the Request a Quote form on this page for a current stock confirmation and lead-time quotation for the exact MCP6021-I/ST orderable code. Production planning should allow for standard sourcing and schedule-review lead times.
What is the MCP6021 equivalent for an 8-pin TSSOP design?
The MCP6022-I/ST, MCP6023-I/ST, and MCP6024-I/ST are same-brand 8-pin TSSOP members of the MCP602x operational-amplifier family that can be evaluated as MCP6021-I/ST replacements. The family uses the common part prefix but provides different offset-voltage grades. The available cross-reference results did not establish a qualified cross-brand substitute, so use the manufacturer cross-reference process and validate all electrical limits.
Can MCP6021-I/ST replace MCP6021-I/SN?
MCP6021-I/ST and MCP6021-I/SN are the same general amplifier family but use different packages: MCP6021-I/ST is an 8-pin TSSOP device, while the verified MCP6021-I/SN listing identifies an 8-pin SOIC package. They are not pin-to-pin drop-in alternatives because their land patterns differ. A PCB change or adapter is required, and the package-specific datasheet details must be reviewed.

Data referensi engineering untuk MCP6021-I/ST — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose MCP6021-I/ST when the design needs a low-power, single-supply operational amplifier with 10 MHz gain-bandwidth product, rail-to-rail input and output, low input bias current, and the particularly low typical offset grade below 0.5 mV. It is a strong fit for battery-powered sensing, precision DC amplification, buffering, and moderate-bandwidth audio or communication interfaces. MCP6021-E/ST is the closest same-package option when its temperature-grade designation better matches the deployment. MCP6022-I/ST, MCP6023-I/ST, and MCP6024-I/ST preserve the TSSOP footprint and family bandwidth but should be selected when their offset grades remain acceptable for the circuit. MCP6022-E/ST and MCP6023-E/ST similarly combine extended-grade ordering codes with larger offset grades. For each substitution, verify the exact supply range, input and output limits, temperature range, offset, bias current, noise, stability, and lifecycle status rather than relying on package compatibility alone.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MCP6021-E/ST MCP6022-I/ST MCP6023-I/ST MCP6024-I/ST MCP6022-E/ST
Package 8-TSSOP 8-TSSOP 8-TSSOP 8-TSSOP 8-TSSOP 8-TSSOP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Amplifier Configuration Single operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier
Gain-Bandwidth Product 10 MHz 10 MHz 10 MHz 10 MHz 10 MHz 10 MHz
Typical Operating Current 1.0 mA 1.0 mA 1.0 mA 1.0 mA 1.0 mA 1.0 mA
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail

Diferensiator Kunci

  • Lower-offset MCP6021 family grade (vsMCP6024-I/ST)
  • Low operating current with substantial bandwidth (vsMCP6022-I/ST)
  • Compact pin-compatible family options (vsMCP6021-E/ST)

Catatan Desain

Route the op-amp output directly to the feedback network and keep the inverting input path short to minimize parasitic feedback and oscillation risk. Place any decoupling capacitor immediately across the supply pins and connect its ground return directly to the device ground pin. Avoid routing sensitive high-impedance input nets beneath or beside switching-node and digital return paths, particularly when the MCP6021-I/ST is used with a 1 pA-class bias-current input.

Verify closed-loop stability at every intended gain, capacitive load, and output-current condition. The 10 MHz gain-bandwidth product is not the usable closed-loop bandwidth for every circuit; at higher noise gain, bandwidth and phase margin change. Add an isolation resistor between the output and difficult capacitive loads if the manufacturer stability guidance indicates it is required. Validate the final layout with oscilloscope measurements at the intended signal frequencies.

Do not assume that rail-to-rail input and output operation eliminates all supply-rail limitations. The input common-mode range, output swing, output drive, and stable operating region still depend on the exact supply voltage and load. Confirm the I/ST temperature grade and worst-case electrical limits in the manufacturer documentation. For high-impedance sources, provide a suitable bias-current return path and account for PCB contamination leakage.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The verified LCSC listing identifies the MCP6021-I/ST as RoHS. No specific AEC-Q100 qualification is indicated for this non-automotive orderable code; additional environmental and material-compliance details require confirmation from the manufacturer.

Pencarian Terkait

mcp6021 datasheet mcp6021 datasheet pdf mcp6021 price mcp6021 op amp mcp6021 equivalent MCP6021-I/ST datasheet MCP6021-I/ST pinout MCP6021-I/ST 8-TSSOP MCP6021-I/ST replacement MCP6021-I/ST vs MCP6024-I/ST Microchip MCP6021-I/ST MCP6021-I/ST sensor amplifier MCP6021-I/ST stock MCP6021-I/ST application circuit

Komponen dan Istilah Terkait

Microchip Technology MCP6021-I/ST MCP6021 MCP6022-I/ST MCP6023-I/ST MCP6024-I/ST MCP6021-E/ST operational amplifier op amp voltage-feedback amplifier amplifier IC semiconductor rail-to-rail input rail-to-rail output gain-bandwidth product input bias current input offset voltage typical operating current 8-pin TSSOP TSSOP package family surface-mount package battery-powered instrumentation high-impedance sensor conditioning RoHS
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ