Microchip Technology

MCP6032-E/SN - Dual 10kHz Precision Op Amp | Microchip

MPN: MCP6032-E/SN ✓ Aktif
Less than 150 µV Vdss 900 nA Id 8-pin SOIC Package
MOQ: 1 |

MCP6032-E/SN Ringkasan

The Microchip Technology MCP6032-E/SN is a dual, low-power precision operational amplifier with a 10 kHz gain-bandwidth product, 900 nA typical operating current, and input offset voltage below 150 µV. The device is packaged in an 8-pin SOIC and supports 1.8 V to 5.5 V operation, making it suitable for low-voltage instrumentation, sensor, and battery-powered systems.

An operational amplifier is an active analog building block that amplifies voltage differences while providing high open-loop gain, negative feedback stability, and rail-to-rail input or output capability where specified. Within the broader semiconductor hierarchy, the MCP6032 is a CMOS operational-amplifier IC within the precision-amplifier family. Its dual-channel configuration provides two independent amplifiers in one package, reducing board area and simplifying symmetrical signal-chain designs.

The MCP6032-E/SN combines low offset with low power consumption and rail-to-rail operation. Its typical operating current of 900 nA is suitable for continuously powered sensing systems, while the 10 kHz gain-bandwidth product supports low-frequency precision signal paths. The manufacturer identifies rail-to-rail input and output swing, high open-loop gain, low bias current, and operation down to 1.8 V as defining characteristics.

Advanced CMOS technology enables the low-bias-current and low-power behavior of the MCP6032. Because its bandwidth is intentionally modest, it prioritizes precision, low supply current, and low noise rather than high-speed signal amplification. The device is offered with extended-temperature operation in an 8-SOIC package. For applications requiring stronger rejection of common-mode signals, the available specifications identify a minimum common-mode rejection ratio of 70 dB.

Typical uses include low-frequency sensor conditioning, current-loop measurements, portable instrumentation, low-current transimpedance stages, and dual-channel buffer or amplifier arrangements. The dual topology is particularly useful when two related signals must be amplified under similar power and temperature conditions, such as differential sensor inputs or dual-axis sensing.

Designers should account for the 10 kHz gain-bandwidth product when setting closed-loop gain and expected bandwidth. Stable operation requires suitable negative feedback, output-load limits must be respected, and input common-mode and output-swing limits should be checked against the actual supply voltage. PCB placement should minimize sensitive input-node coupling and provide a low-impedance return path for each supply rail.

This product record combines the manufacturer’s core performance information, ordering details, and practical selection guidance. It also distinguishes the exact MCP6032-E/SN order code from nearby family members so engineers can evaluate package, temperature-range, bandwidth, and precision requirements before placing the dual amplifier in a precision low-power design.

Alternatif penggantian untuk MCP6032-E/SN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

MCP6032T-E/SN

✅ Drop-In
📦 8-SOIC
Same 10 kHz gain-bandwidth and 900 nA typical operating current; ordering suffix changes the tape-and-reel packaging configuration

📋 Alternatif referensi (tidak dalam katalog)

MCP6032-E/SN Rating Maksimal & Karakteristik Listrik

Number of Channels 2 channels
Product Type Dual precision operational amplifier
Gain-Bandwidth Product 10 kHz
Typical Operating Current 900 nA
Input Offset Voltage Less than 150 µV
Maximum Input Offset Voltage ±150 µV
Minimum Common-Mode Rejection Ratio 70 dB
Supply Voltage Range 1.8 V to 5.5 V
Input Common-Mode Range Rail-to-rail input
Output Swing Rail-to-rail output
Process Technology Advanced CMOS
Open-Loop Gain High open-loop gain
Input Bias Current Low bias current
Temperature Grade Extended temperature grade
Paket 8-pin SOIC
Tipe Mounting Surface mount
Status RoHS RoHS status not stated

MCP6032-E/SN 8-pin soic Diamant Konfigurasi Panduan

Konfigurasi pin untuk MCP6032-E/SN (8-pin soic pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 8-pin soic untuk MCP6032-E/SN

Tidak ada data diatribut pin yang tersedia untuk MCP6032-E/SN.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MCP6032-E/SN cocok untuk 6 aplikasis: Low-Power Sensor Signal Conditioning, Portable Instrumentation, Low-Current Transimpedance Amplification, Battery-Powered Industrial Monitor, Precision Current Measurement, Low-Frequency Data Acquisition.

🧩

Low-Power Sensor Signal Conditioning

The MCP6032-E/SN is well suited to conditioning slow sensor signals where power consumption matters more than wide bandwidth. Its 900 nA typical operating current and 1.8 V minimum supply permit operation close to the sensor’s supply voltage, while the two amplifiers can process complementary or differential signals. The input offset below 150 µV helps preserve small-signal accuracy, and the 10 kHz gain-bandwidth product is sufficient for common temperature, pressure, and position sensing stages.

📱

Portable Instrumentation

The MCP6032-E/SN can serve as the analog input amplifier in compact, battery-operated instrumentation because its low 900 nA typical operating current reduces the burden on the power budget. Operating from 1.8 V to 5.5 V gives designers flexibility across low-voltage systems, while the dual channel can handle two measurement inputs in one 8-SOIC package. Its rail-to-rail input and output characteristics are useful when the usable signal range must extend close to the supply rails.

🔬

Low-Current Transimpedance Amplification

The MCP6032-E/SN can be evaluated for low-level current-to-voltage conversion when the expected source impedance and bandwidth are modest. A transimpedance configuration uses negative feedback to convert sensor current into a measurable voltage, and the amplifier’s input offset below 150 µV can reduce errors in low-current measurements. The 10 kHz gain-bandwidth product must be checked against the feedback resistor, source capacitance, and required settling behavior before the circuit is finalized.

🏭

Battery-Powered Industrial Monitor

The MCP6032-E/SN fits low-frequency industrial monitoring circuits that must operate from a compact energy budget. Its dual-channel structure allows related diagnostic or sensing inputs to share one package, while the 900 nA typical current keeps amplifier overhead low. Rail-to-rail input and output swing can improve utilization of a 1.8 V to 5.5 V supply, but designers should still account for output-load limits, noise, and the bandwidth required by the monitored process.

⚡

Precision Current Measurement

The MCP6032-E/SN can amplify the voltage generated across a shunt or sense element in precision current-measurement systems. The offset voltage below 150 µV helps limit error near the measurement floor, and the 10 kHz gain-bandwidth product is adequate for many slow current loops and monitoring channels. The dual amplifier arrangement can be used for a measurement channel plus a complementary reference or buffer, subject to input common-mode, output-swing, and load checks.

🖥️

Low-Frequency Data Acquisition

The MCP6032-E/SN can be used ahead of a slow analog-to-digital converter when the sampled bandwidth does not require a high-speed amplifier. Its 10 kHz gain-bandwidth product supports low-frequency signal amplification, while the 900 nA typical operating current benefits continuously powered acquisition equipment. The dual-channel package can process two inputs, and the 1.8 V to 5.5 V range supports compatibility with low-voltage mixed-signal systems. Input filtering and ADC settling must be validated together.

Ringkasan Produk Direkomendasikan

MCP6032-E/SN Microchip Technology Digunakan di dalam: Low-Power Sensor Signal Conditioning, Portable Instrumentation, Low-Current Transimpedance Amplification, Battery-Powered Industrial Monitor, Precision Current Measurement, Low-Frequency Data Acquisition MCP6032T-E/SN Same-family 8-SOIC ordering alternative Digunakan di dalam: Low-Power Sensor Signal Conditioning, Portable Instrumentation, Low-Current Transimpedance Amplification, Battery-Powered Industrial Monitor, Precision Current Measurement, Low-Frequency Data Acquisition
What is the MCP6032-E/SN?
The MCP6032-E/SN is a dual precision CMOS operational amplifier with a 10 kHz gain-bandwidth product, 900 nA typical operating current, and input offset voltage below 150 µV. According to the Microchip MCP6032 product page, it provides rail-to-rail input and output swing, high open-loop gain, low bias current, and operation from a 1.8 V supply. The 8-SOIC package provides two amplifiers in a compact surface-mount format.
What is the operating voltage of MCP6032-E/SN?
The MCP6032-E/SN operates from 1.8 V to 5.5 V. This range makes it appropriate for low-voltage sensor systems, portable measurement equipment, and other designs powered from a single low-voltage rail. The manufacturer specifies advanced CMOS technology together with rail-to-rail input and output behavior, allowing the amplifier to operate across the full supply range while supporting low-current system architectures.
What are the key specifications of MCP6032-E/SN that engineers should know?
The key specifications are a 10 kHz gain-bandwidth product, 900 nA typical operating current, input offset voltage below 150 µV, and a 1.8 V to 5.5 V supply range. The device contains two amplifiers and uses an 8-pin SOIC package. According to Microchip, its CMOS process provides rail-to-rail input and output swing, low bias current, high open-loop gain, and an extended-temperature ordering option.
Where can I download the MCP6032-E/SN datasheet PDF?
The MCP6032-E/SN datasheet and product documentation are available through Microchip Technology’s MCP6032 product page at https://www.microchip.com/en-us/product/MCP6032. The page identifies the device as a dual precision operational amplifier with 10 kHz gain-bandwidth, 900 nA typical operating current, and offset voltage below 150 µV. Use the manufacturer’s pin-description table when assigning the eight SOIC connections in a PCB layout.
Where can I find the MCP6032-E/SN pinout?
The MCP6032-E/SN pinout is shown in the pin-description diagram in the Microchip MCP6032 family documentation. The exact order code is supplied in an 8-pin SOIC package, but individual pin numbers and functions should be assigned from that manufacturer diagram rather than inferred from another amplifier. The device page is available at https://www.microchip.com/en-us/product/MCP6032.
Where to buy MCP6032-E/SN online?
Use the Request a Quote form on this page to request MCP6032-E/SN availability, current pricing, and order quantity. The exact device is an 8-SOIC, dual precision operational amplifier rated for a 1.8 V to 5.5 V supply. Quoting through the form helps confirm the exact suffix, packaging, and delivery requirements without relying on a generic family listing.
What is the price of MCP6032-E/SN?
The current price for MCP6032-E/SN should be requested through the Request a Quote form on this page so the order code and quantity can be confirmed together. The part is a dual 8-SOIC precision amplifier with 10 kHz gain-bandwidth, 900 nA typical operating current, and a 1.8 V to 5.5 V operating range. Quote requests also allow the required quantity and packaging expectations to be specified.
What is the lead time for MCP6032-E/SN?
The current lead time for MCP6032-E/SN should be obtained through the Request a Quote form on this page. Lead time can depend on order quantity, stock position, and the required shipment destination. Microchip identifies the device as an active MCP6032-family product with an 8-SOIC package, and a formal quote provides the most useful commitment for the exact MCP6032-E/SN order code.
Is MCP6032-E/SN in stock?
Current MCP6032-E/SN stock should be confirmed through the Request a Quote form on this page by entering the required quantity. The exact device is the extended-temperature, 8-SOIC dual precision amplifier version of the MCP6032 family. Inventory can move independently of family-level availability, so requesting the exact MPN avoids substitution between suffix codes or package configurations.
What can replace MCP6032-E/SN?
A valid drop-in replacement must use the same 8-SOIC footprint and preserve the dual amplifier’s pin functions, 1.8 V to 5.5 V supply range, low offset, and low-power operation. MCP6032T-E/SN is the closest listed ordering alternative because it is the same MCP6032 dual-amplifier family in an 8-SOIC configuration. Confirm temperature grade, tape-and-reel packaging, and the complete electrical table before approving a substitution.
Is MCP6032-E/SN the same as MCP6032T-E/SN?
The MCP6032-E/SN and MCP6032T-E/SN belong to the same MCP6032 dual-amplifier family and are both listed in 8-SOIC configurations. The family-level electrical characteristics include 10 kHz gain-bandwidth, 900 nA typical operating current, and less than 150 µV offset voltage. The principal ordering distinction is the package or shipping code, so engineers should verify reel configuration and markings before treating the complete MPNs as interchangeable.
MCP6032-E/SN vs MCP6032T-E/SN: which is better for a new design?
Choose the MCP6032T-E/SN when its confirmed tape-and-reel configuration matches the assembly process; otherwise, the MCP6032-E/SN is the relevant exact order code for the stated SOIC configuration. Both are dual MCP6032-family amplifiers with a 10 kHz gain-bandwidth product and 900 nA typical operating current. The decision should be based on verified packaging, temperature grade, and order-code markings rather than bandwidth differences.
When should I choose MCP6032-E/SN over another precision op amp?
Choose the MCP6032-E/SN when a dual amplifier with very low operating current is more important than wide bandwidth. Its 900 nA typical operating current, 10 kHz gain-bandwidth product, offset below 150 µV, and 1.8 V to 5.5 V range suit low-frequency sensor and instrumentation paths. It is less appropriate when a signal requires substantially higher bandwidth, faster slew rate, lower noise, or a larger output-current capability.
Is MCP6032-E/SN suitable for battery-powered sensor conditioning?
The MCP6032-E/SN is suitable for many battery-powered sensor-conditioning designs because its typical operating current is only 900 nA and its supply range begins at 1.8 V. The dual topology can process two related sensor channels while maintaining a compact 8-SOIC footprint. Its 10 kHz gain-bandwidth product is appropriate for slow or low-frequency signals, not high-bandwidth waveform acquisition.
What is the best cross-brand equivalent for MCP6032-E/SN?
No cross-brand drop-in equivalent is established for the MCP6032-E/SN in the available component records. A substitute would need to match the 8-SOIC footprint, dual pin arrangement, 1.8 V to 5.5 V supply range, low offset, and approximately 900 nA current consumption while meeting the application’s bandwidth and output-drive needs. Use the manufacturer’s cross-reference tools and verify the complete electrical and pin tables before approving any cross-brand device.

Data referensi engineering untuk MCP6032-E/SN — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MCP6032-E/SN when the design requires a dual precision amplifier with very low operating current, low offset, rail-to-rail signal handling, and a supply range beginning at 1.8 V. It is particularly appropriate for slow sensor signals, portable measurement circuits, current sensing, and low-frequency acquisition channels. MCP6032T-E/SN is the closest listed same-family option when its order code and tape-and-reel configuration satisfy the assembly requirement. The two parts share the essential MCP6032 performance profile: two channels, 10 kHz gain-bandwidth, 900 nA typical current, and offset below 150 µV. Do not select this family when the signal requires substantially higher bandwidth, lower input noise, faster slew rate, or greater output-current capability. Before substituting either device, verify the complete pin arrangement, temperature grade, absolute maximum ratings, and load behavior against the intended circuit.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MCP6032T-E/SN
Package 8-pin SOIC 8-pin SOIC
Brand Microchip Technology Microchip Technology
Number of Channels 2 channels 2 channels
Gain-Bandwidth Product 10 kHz 10 kHz
Typical Operating Current 900 nA 900 nA
Input Offset Voltage Less than 150 µV Less than 150 µV
Supply Voltage Range 1.8 V to 5.5 V 1.8 V to 5.5 V
Input and Output Swing Rail-to-rail Rail-to-rail
Minimum Common-Mode Rejection Ratio 70 dB 70 dB
Process Technology Advanced CMOS Advanced CMOS

Diferensiator Kunci

  • Very low operating current for a dual precision amplifier (vsMCP6032T-E/SN)
  • Dual precision-amplifier integration (vsMCP6032T-E/SN)
  • Low-offset operation at low supply voltage (vsMCP6032T-E/SN)

Catatan Desain

Account for the 10 kHz gain-bandwidth product when selecting the closed-loop gain. The amplifier is optimized for low-power precision rather than high-bandwidth operation, and excessive gain can reduce stability or bandwidth. Verify the intended noise gain, feedback-network impedance, capacitive loading, and required settling time before using MCP6032-E/SN in a fast acquisition or waveform path.

Use the 1.8 V to 5.5 V supply range as a hard design boundary and check input and output common-mode limits at the selected rail voltage. Rail-to-rail behavior provides useful signal range, but it does not eliminate output-current, capacitive-load, or supply-voltage sensitivity constraints. Confirm the exact operating conditions and load requirements in the manufacturer’s MCP6032 family documentation.

Place the amplifier inputs, feedback components, and decoupling capacitors close to the corresponding package pins. Keep sensitive input traces away from switching nodes and high-current return paths, and connect the supply return directly to a low-impedance ground plane. Because the MCP6032-E/SN is intended for low-current precision applications, careful leakage management around high-impedance input nodes is as important as bypassing the supply rails.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The manufacturer and distributor records do not state the requested environmental and material-compliance status for this exact order code. Automotive qualification is not claimed for the MCP6032-E/SN.

Data disahkan pada: 2026-11-15 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

mcp6032 datasheet MCP6032-E/SN datasheet MCP6032-E/SN pinout MCP6032-E/SN specifications MCP6032-E/SN equivalent MCP6032-E/SN replacement MCP6032-E/SN vs MCP6032T-E/SN Microchip MCP6032-E/SN MCP6032-E/SN 8-SOIC MCP6032-E/SN low power amplifier MCP6032-E/SN price MCP6032-E/SN stock MCP6032-E/SN sensor conditioning MCP6032-E/SN cross reference MCP6032-E/SN footprint

Komponen dan Istilah Terkait

Microchip Technology MCP6032-E/SN MCP6032T-E/SN MCP6032 Operational amplifier Precision amplifier Dual amplifier CMOS operational amplifier Analog IC Semiconductor Rail-to-rail input Rail-to-rail output Gain-bandwidth product Input offset voltage Quiescent current Common-mode rejection ratio Open-loop gain Advanced CMOS 8-pin SOIC SOIC package family Surface-mount device Low-power sensor conditioning Portable instrumentation Transimpedance amplifier Current measurement
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ