MCP6032-E/SN - Dual 10kHz Precision Op Amp | Microchip
料号: MCP6032-E/SN ✓ 量产中MCP6032-E/SN 概述
An operational amplifier is an active analog building block that amplifies voltage differences while providing high open-loop gain, negative feedback stability, and rail-to-rail input or output capability where specified. Within the broader semiconductor hierarchy, the MCP6032 is a CMOS operational-amplifier IC within the precision-amplifier family. Its dual-channel configuration provides two independent amplifiers in one package, reducing board area and simplifying symmetrical signal-chain designs.
The MCP6032-E/SN combines low offset with low power consumption and rail-to-rail operation. Its typical operating current of 900 nA is suitable for continuously powered sensing systems, while the 10 kHz gain-bandwidth product supports low-frequency precision signal paths. The manufacturer identifies rail-to-rail input and output swing, high open-loop gain, low bias current, and operation down to 1.8 V as defining characteristics.
Advanced CMOS technology enables the low-bias-current and low-power behavior of the MCP6032. Because its bandwidth is intentionally modest, it prioritizes precision, low supply current, and low noise rather than high-speed signal amplification. The device is offered with extended-temperature operation in an 8-SOIC package. For applications requiring stronger rejection of common-mode signals, the available specifications identify a minimum common-mode rejection ratio of 70 dB.
Typical uses include low-frequency sensor conditioning, current-loop measurements, portable instrumentation, low-current transimpedance stages, and dual-channel buffer or amplifier arrangements. The dual topology is particularly useful when two related signals must be amplified under similar power and temperature conditions, such as differential sensor inputs or dual-axis sensing.
Designers should account for the 10 kHz gain-bandwidth product when setting closed-loop gain and expected bandwidth. Stable operation requires suitable negative feedback, output-load limits must be respected, and input common-mode and output-swing limits should be checked against the actual supply voltage. PCB placement should minimize sensitive input-node coupling and provide a low-impedance return path for each supply rail.
This product record combines the manufacturer’s core performance information, ordering details, and practical selection guidance. It also distinguishes the exact MCP6032-E/SN order code from nearby family members so engineers can evaluate package, temperature-range, bandwidth, and precision requirements before placing the dual amplifier in a precision low-power design.
直接替换替代料: MCP6032-E/SN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
MCP6032T-E/SN
✅ 直接替换📋 参考替代料(不在目录中)
MCP6032-E/SN 最大额定值与电气特性
| Number of Channels | 2 channels |
| Product Type | Dual precision operational amplifier |
| Gain-Bandwidth Product | 10 kHz |
| Typical Operating Current | 900 nA |
| Input Offset Voltage | Less than 150 µV |
| Maximum Input Offset Voltage | ±150 µV |
| Minimum Common-Mode Rejection Ratio | 70 dB |
| Supply Voltage Range | 1.8 V to 5.5 V |
| Input Common-Mode Range | Rail-to-rail input |
| Output Swing | Rail-to-rail output |
| Process Technology | Advanced CMOS |
| Open-Loop Gain | High open-loop gain |
| Input Bias Current | Low bias current |
| Temperature Grade | Extended temperature grade |
| 封装 | 8-pin SOIC |
| 安装类型 | Surface mount |
| RoHS 状态 | RoHS status not stated |
MCP6032-E/SN 8-pin soic 引脚配置指南
MCP6032-E/SN(8-pin soic 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: MCP6032-E/SN.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MCP6032-E/SN 适用于 6 应用s: Low-Power Sensor Signal Conditioning, Portable Instrumentation, Low-Current Transimpedance Amplification, Battery-Powered Industrial Monitor, Precision Current Measurement, Low-Frequency Data Acquisition.
Low-Power Sensor Signal Conditioning
The MCP6032-E/SN is well suited to conditioning slow sensor signals where power consumption matters more than wide bandwidth. Its 900 nA typical operating current and 1.8 V minimum supply permit operation close to the sensor’s supply voltage, while the two amplifiers can process complementary or differential signals. The input offset below 150 µV helps preserve small-signal accuracy, and the 10 kHz gain-bandwidth product is sufficient for common temperature, pressure, and position sensing stages.
推荐
Portable Instrumentation
The MCP6032-E/SN can serve as the analog input amplifier in compact, battery-operated instrumentation because its low 900 nA typical operating current reduces the burden on the power budget. Operating from 1.8 V to 5.5 V gives designers flexibility across low-voltage systems, while the dual channel can handle two measurement inputs in one 8-SOIC package. Its rail-to-rail input and output characteristics are useful when the usable signal range must extend close to the supply rails.
推荐
Low-Current Transimpedance Amplification
The MCP6032-E/SN can be evaluated for low-level current-to-voltage conversion when the expected source impedance and bandwidth are modest. A transimpedance configuration uses negative feedback to convert sensor current into a measurable voltage, and the amplifier’s input offset below 150 µV can reduce errors in low-current measurements. The 10 kHz gain-bandwidth product must be checked against the feedback resistor, source capacitance, and required settling behavior before the circuit is finalized.
推荐
Battery-Powered Industrial Monitor
The MCP6032-E/SN fits low-frequency industrial monitoring circuits that must operate from a compact energy budget. Its dual-channel structure allows related diagnostic or sensing inputs to share one package, while the 900 nA typical current keeps amplifier overhead low. Rail-to-rail input and output swing can improve utilization of a 1.8 V to 5.5 V supply, but designers should still account for output-load limits, noise, and the bandwidth required by the monitored process.
推荐
Precision Current Measurement
The MCP6032-E/SN can amplify the voltage generated across a shunt or sense element in precision current-measurement systems. The offset voltage below 150 µV helps limit error near the measurement floor, and the 10 kHz gain-bandwidth product is adequate for many slow current loops and monitoring channels. The dual amplifier arrangement can be used for a measurement channel plus a complementary reference or buffer, subject to input common-mode, output-swing, and load checks.
推荐
Low-Frequency Data Acquisition
The MCP6032-E/SN can be used ahead of a slow analog-to-digital converter when the sampled bandwidth does not require a high-speed amplifier. Its 10 kHz gain-bandwidth product supports low-frequency signal amplification, while the 900 nA typical operating current benefits continuously powered acquisition equipment. The dual-channel package can process two inputs, and the 1.8 V to 5.5 V range supports compatibility with low-voltage mixed-signal systems. Input filtering and ADC settling must be validated together.
推荐
推荐产品汇总
工程参考数据: MCP6032-E/SN ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MCP6032T-E/SN |
|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC |
| Brand | Microchip Technology | Microchip Technology |
| Number of Channels | 2 channels | 2 channels |
| Gain-Bandwidth Product | 10 kHz | 10 kHz |
| Typical Operating Current | 900 nA | 900 nA |
| Input Offset Voltage | Less than 150 µV | Less than 150 µV |
| Supply Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Input and Output Swing | Rail-to-rail | Rail-to-rail |
| Minimum Common-Mode Rejection Ratio | 70 dB | 70 dB |
| Process Technology | Advanced CMOS | Advanced CMOS |
关键差异点
- Very low operating current for a dual precision amplifier (对比 MCP6032T-E/SN)
- Dual precision-amplifier integration (对比 MCP6032T-E/SN)
- Low-offset operation at low supply voltage (对比 MCP6032T-E/SN)
设计说明
Account for the 10 kHz gain-bandwidth product when selecting the closed-loop gain. The amplifier is optimized for low-power precision rather than high-bandwidth operation, and excessive gain can reduce stability or bandwidth. Verify the intended noise gain, feedback-network impedance, capacitive loading, and required settling time before using MCP6032-E/SN in a fast acquisition or waveform path.
Use the 1.8 V to 5.5 V supply range as a hard design boundary and check input and output common-mode limits at the selected rail voltage. Rail-to-rail behavior provides useful signal range, but it does not eliminate output-current, capacitive-load, or supply-voltage sensitivity constraints. Confirm the exact operating conditions and load requirements in the manufacturer’s MCP6032 family documentation.
Place the amplifier inputs, feedback components, and decoupling capacitors close to the corresponding package pins. Keep sensitive input traces away from switching nodes and high-current return paths, and connect the supply return directly to a low-impedance ground plane. Because the MCP6032-E/SN is intended for low-current precision applications, careful leakage management around high-impedance input nodes is as important as bypassing the supply rails.
合规信息
The manufacturer and distributor records do not state the requested environmental and material-compliance status for this exact order code. Automotive qualification is not claimed for the MCP6032-E/SN.