MCP6044-E/SL - 14kHz Quad RRIO Op Amp | Microchip
MPN: MCP6044-E/SL ✓ AktifMCP6044-E/SL Ringkasan
An operational amplifier is a voltage-controlled differential amplifier that amplifies the voltage difference between its inverting and non-inverting inputs. The MCP6044 belongs to the operational-amplifier hierarchy, combining low power consumption, rail-to-rail signal handling, and four amplifiers in one package. Rail-to-rail input and output capability allows signals to approach the supply rails, making the device useful in low-voltage instrumentation, sensor interfaces, portable equipment, and battery-powered systems.
The MCP6044 family provides a 14 kHz gain-bandwidth product and a low typical operating current of 600 nA. The MCP6044-E/SL additionally provides rail-to-rail input and output swing, an offset voltage below 3 mV, operation down to 1.4 V, and a slew rate of 0.003 V/us. These characteristics favor low-frequency signal conditioning over high-bandwidth waveform or active-filter applications.
Microchip describes the MCP6044 as a general-purpose CMOS operational amplifier with low bias current, high open-loop gain, and rail-to-rail output swing. Four amplifiers in one 14-pin SOIC reduce board area by consolidating independent analog channels. The device is suited to applications requiring inexpensive, low-power signal amplification rather than high-speed performance.
Typical uses include industrial process-control interfaces, low-power battery-operated equipment, portable and wearable products, buffered sensor signals, and general analog conditioning. Four channels can also implement mixed functions such as amplifiers, comparators, filters, or buffer stages when the required bandwidth and stability margins are satisfied.
A primary design consideration is bandwidth. Closed-loop gain must remain compatible with the 14 kHz gain-bandwidth product, and layout must preserve signal integrity around sensitive analog nodes. Use the manufacturer datasheet for the exact pin assignments, recommended capacitor values, input common-mode limits, and stability requirements.
This page consolidates the manufacturer product information, exact distributor observations, package details, selection criteria, and practical engineering considerations into one design reference for engineers evaluating the MCP6044-E/SL in low-voltage, low-power analog systems.
Alternatif penggantian untuk MCP6044-E/SL — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MCP6044-E/SL (sama faktor bentuk dan footprint) — berbeda di dalam Package, Typical Operating Current.
MCP6044-I/SL
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →MCP6044T-I/SL
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MCP6044T-E/SL
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MCP6044-E/SL Rating Maksimal & Karakteristik Listrik
| Amplifier Count | 4 amplifiers |
| Gain-Bandwidth Product | 14 kHz |
| Typical Operating Current | 600 nA per amplifier |
| Maximum Quiescent Current | Less than 1 uA per amplifier |
| Typical Offset Voltage | Less than 3 mV |
| Minimum Supply Voltage | 1.4 V |
| Maximum Supply Voltage | 6 V |
| Input Type | Rail-to-rail |
| Tipe Output | Rail-to-rail |
| Slew Rate | 0.003 V/us |
| Device Class | Standard general-purpose amplifier |
| Technology | CMOS |
| Paket | 14-pin SOIC, 0.154 in (3.90 mm) width |
| Tipe Mounting | Surface mount |
| Operating Current | 600 nA typical per amplifier |
MCP6044-E/SL 14-pin soic, 0.154 in (3.90 mm) width Diamant Konfigurasi Panduan
Konfigurasi pin untuk MCP6044-E/SL (14-pin soic, 0.154 in (3.90 mm) width pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk MCP6044-E/SL.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MCP6044-E/SL cocok untuk 6 aplikasis: Battery-Powered Sensor Signal Conditioning, Industrial Process-Control Interfaces, Portable and Wearable Electronics, Low-Voltage Instrumentation, Low-Power Buffering and Level Translation, Battery Monitoring and Protection.
Battery-Powered Sensor Signal Conditioning
The MCP6044-E/SL fits low-power sensor interfaces because its typical operating current is 600 nA per amplifier and its single-supply operating range begins at 1.4 V. Four channels can buffer or amplify inputs from low-energy sensors without requiring a higher-voltage rail. The 14 kHz gain-bandwidth product is appropriate for slow sensor signals rather than high-frequency waveforms. Designers should verify the sensor output range against the amplifier's input common-mode limits and account for the increased noise gain when operating at high closed-loop gain.
Direkomendasikan
Industrial Process-Control Interfaces
The MCP6044-E/SL is suitable for buffering and conditioning low-level signals in industrial process-control systems. Its four amplifiers per package reduce component count, while rail-to-rail input and output operation supports operation close to the 1.4 V to 6 V supply range. The 600 nA typical current per amplifier favors distributed low-power measurement nodes. For process signals near the supply rails, verify common-mode behavior, output swing, offset voltage, and stability at the intended gain before deploying the device.
Direkomendasikan
Portable and Wearable Electronics
The MCP6044-E/SL addresses the power and area constraints of portable and wearable electronics through four amplifiers in a 14-pin SOIC and a 600 nA typical operating current per amplifier. Its low 1.4 V minimum supply permits direct operation from compact energy-storage cells, and rail-to-rail signal handling can improve utilization of a limited voltage range. The relatively low 14 kHz bandwidth is well matched to many physiological, environmental, and user-interface sensor channels, but it is not intended for high-frequency audio or communication signals.
Direkomendasikan
Low-Voltage Instrumentation
The MCP6044-E/SL can serve as the analog front end for low-voltage instrumentation requiring several precision-oriented amplification channels. Microchip specifies a typical offset voltage below 3 mV, and rail-to-rail input and output capability helps preserve signal range in compact systems. Four channels can support differential amplifiers, non-inverting stages, buffers, or mixed instrumentation functions. Because the gain-bandwidth product is 14 kHz, engineers should choose suitable closed-loop gains, account for noise gain, and verify stability using the manufacturer's application guidance.
Direkomendasikan
Low-Power Buffering and Level Translation
The MCP6044-E/SL can buffer low-frequency logic or sensor levels when a rail-to-rail output is required within a 1.4 V to 6 V system. The quad configuration provides four independent buffers in one 14-pin SOIC, and the 600 nA typical current per amplifier reduces the penalty of continuous buffering. Output swing and input common-mode limits still constrain the usable logic range, so the input and output levels must be checked against the supply voltage. The 14 kHz bandwidth is more than adequate for ordinary control signals but not for high-speed digital links.
Direkomendasikan
Battery Monitoring and Protection
The MCP6044-E/SL is applicable to battery-monitoring circuits that compare sensed cell or rail voltages against thresholds. Its low typical operating current of 600 nA per amplifier is beneficial when monitoring power continuously, while operation down to 1.4 V supports low-cell-voltage systems. Rail-to-rail input and output behavior can improve measurement utilization near the supply limits. The amplifier does not provide dedicated protection, cell balancing, or continuous discharge-current sensing, so those functions must be implemented separately and reviewed against the device's common-mode limits.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MCP6044-E/SL — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MCP6044-I/SL | MCP6044T-I/SL | MCP6044T-E/SL |
|---|---|---|---|---|
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Amplifier Count | 4 amplifiers | 4 amplifiers | 4 amplifiers | 4 amplifiers |
| Gain-Bandwidth Product | 14 kHz | 14 kHz | 14 kHz | 14 kHz |
| Typical Operating Current | 600 nA per amplifier | 600 nA per amplifier | 600 nA per amplifier | 600 nA per amplifier |
| Supply Voltage Range | 1.4 V to 6 V | 1.4 V to 6 V | 1.4 V to 6 V | 1.4 V to 6 V |
| Input and Output Operation | Rail-to-rail input and output | Rail-to-rail input and output | Rail-to-rail input and output | Rail-to-rail input and output |
| Slew Rate | 0.003 V/us | 0.003 V/us | 0.003 V/us | 0.003 V/us |
| Temperature Grade | E grade | I grade | I grade | E grade |
| Price | Current quotation required | Current quotation required | Current quotation required | Current quotation required |
Diferensiator Kunci
- Four amplifiers in one compact 14-pin SOIC (vsMCP6044-I/SL)
- Very low typical operating current for a quad amplifier (vsMCP6044T-I/SL)
- Low-voltage rail-to-rail operation (vsMCP6044T-E/SL)
Catatan Desain
Do not treat the 14 kHz gain-bandwidth product as a 14 kHz usable bandwidth at every gain. Closed-loop bandwidth depends on the selected gain and noise gain, while capacitive loading can further alter stability. Use the manufacturer stability and electrical-characteristics tables, place feedback components close to the amplifier pins, and avoid driving long PCB traces from the output.
Account for both amplifier quiescent current and load current when sizing a 1.4 V to 6 V supply. The typical operating current is 600 nA per amplifier, but output current, input bias current, leakage, and external-network consumption may dominate the total. Decouple each supply rail near the package with the capacitance specified by the manufacturer, and keep return currents away from sensitive input traces.
Route each amplifier's inverting input, non-inverting input, and output as short as practical, especially for high-gain configurations. Keep the SOIC footprint free of unintended solder bridges between the closely spaced leads, verify the manufacturer's pin numbering before PCB release, and maintain a quiet return path. Guard techniques may help on high-impedance inputs, but their effect should be checked against temperature and leakage requirements.
Check the input common-mode range and output swing against the actual signal and supply levels before treating the device as a full rail-to-rail interface. Rail-to-rail operation reduces headroom constraints but does not eliminate output-current, slew-rate, or load limitations. For low-frequency sensor signals, place input filtering close to the source and validate that added capacitance does not compromise stability.
Informasi Konformitas
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer or lot documentation. The MCP6044-E/SL is a general-purpose industrial amplifier rather than an explicitly automotive-qualified ordering code.