Microchip Technology

MCP6044-E/SL - 14kHz Quad RRIO Op Amp | Microchip

부품 번호: MCP6044-E/SL ✓ 활성
Less than 3 mV Vdss 600 nA per amplifier Id 14-pin SOIC, 0.154 in (3.90 mm) width Package
MOQ: 1 |

MCP6044-E/SL 개요

The Microchip Technology MCP6044-E/SL is a quad general-purpose operational amplifier with a 14 kHz gain-bandwidth product, typical operating current of 600 nA per amplifier, and typical offset voltage below 3 mV. The device operates from a single supply as low as 1.4 V, supports rail-to-rail input and output operation, and is packaged in a narrow 14-pin SOIC.

An operational amplifier is a voltage-controlled differential amplifier that amplifies the voltage difference between its inverting and non-inverting inputs. The MCP6044 belongs to the operational-amplifier hierarchy, combining low power consumption, rail-to-rail signal handling, and four amplifiers in one package. Rail-to-rail input and output capability allows signals to approach the supply rails, making the device useful in low-voltage instrumentation, sensor interfaces, portable equipment, and battery-powered systems.

The MCP6044 family provides a 14 kHz gain-bandwidth product and a low typical operating current of 600 nA. The MCP6044-E/SL additionally provides rail-to-rail input and output swing, an offset voltage below 3 mV, operation down to 1.4 V, and a slew rate of 0.003 V/us. These characteristics favor low-frequency signal conditioning over high-bandwidth waveform or active-filter applications.

Microchip describes the MCP6044 as a general-purpose CMOS operational amplifier with low bias current, high open-loop gain, and rail-to-rail output swing. Four amplifiers in one 14-pin SOIC reduce board area by consolidating independent analog channels. The device is suited to applications requiring inexpensive, low-power signal amplification rather than high-speed performance.

Typical uses include industrial process-control interfaces, low-power battery-operated equipment, portable and wearable products, buffered sensor signals, and general analog conditioning. Four channels can also implement mixed functions such as amplifiers, comparators, filters, or buffer stages when the required bandwidth and stability margins are satisfied.

A primary design consideration is bandwidth. Closed-loop gain must remain compatible with the 14 kHz gain-bandwidth product, and layout must preserve signal integrity around sensitive analog nodes. Use the manufacturer datasheet for the exact pin assignments, recommended capacitor values, input common-mode limits, and stability requirements.

This page consolidates the manufacturer product information, exact distributor observations, package details, selection criteria, and practical engineering considerations into one design reference for engineers evaluating the MCP6044-E/SL in low-voltage, low-power analog systems.

드롭인 대체품: MCP6044-E/SL — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MCP6044-E/SL (동일 폼 팩터 및 풋프린트) — 차이점: Package, Typical Operating Current.

Microchip Technology
Package: 14-lead SOIC
Typical Operating Current: 600 nA

MCP6044-I/SL

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 14-SOIC
Quad CMOS operational amplifier · 4 circuits · 14 kHz · 600 nA · Less than 1 uA · 1.4 V · 6 V · Rail-to-rail

가격 문의

데이터시트 보기 →

MCP6044T-I/SL

✅ 드롭인 ⚠️ 사양 미검증
📦 14-SOIC
Same 14-SOIC electrical family with 14 kHz bandwidth and 600 nA typical current; temperature-grade and packing ordering differ.

📋 참조 대체품 (카탈로그에 없음)

MCP6044T-E/SL

✅ 드롭인 ⚠️ 사양 미검증
📦 14-SOIC
Same 14-SOIC electrical family with 14 kHz bandwidth and 600 nA typical current; packing ordering differs while core specifications remain unchanged.

📋 참조 대체품 (카탈로그에 없음)

MCP6044-E/SL 최대 정격 & 전기적 특성

Amplifier Count 4 amplifiers
Gain-Bandwidth Product 14 kHz
Typical Operating Current 600 nA per amplifier
Maximum Quiescent Current Less than 1 uA per amplifier
Typical Offset Voltage Less than 3 mV
Minimum Supply Voltage 1.4 V
Maximum Supply Voltage 6 V
Input Type Rail-to-rail
출력 유형 Rail-to-rail
Slew Rate 0.003 V/us
Device Class Standard general-purpose amplifier
Technology CMOS
패키지 14-pin SOIC, 0.154 in (3.90 mm) width
실장 유형 Surface mount
Operating Current 600 nA typical per amplifier

MCP6044-E/SL 14-pin soic, 0.154 in (3.90 mm) width 핀 구성 가이드

MCP6044-E/SL(14-pin soic, 0.154 in (3.90 mm) width 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

MCP6044-E/SL의 14-pin soic, 0.154 in (3.90 mm) width 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MCP6044-E/SL.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MCP6044-E/SL 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Signal Conditioning, Industrial Process-Control Interfaces, Portable and Wearable Electronics, Low-Voltage Instrumentation, Low-Power Buffering and Level Translation, Battery Monitoring and Protection.

🧩

Battery-Powered Sensor Signal Conditioning

The MCP6044-E/SL fits low-power sensor interfaces because its typical operating current is 600 nA per amplifier and its single-supply operating range begins at 1.4 V. Four channels can buffer or amplify inputs from low-energy sensors without requiring a higher-voltage rail. The 14 kHz gain-bandwidth product is appropriate for slow sensor signals rather than high-frequency waveforms. Designers should verify the sensor output range against the amplifier's input common-mode limits and account for the increased noise gain when operating at high closed-loop gain.

🏭

Industrial Process-Control Interfaces

The MCP6044-E/SL is suitable for buffering and conditioning low-level signals in industrial process-control systems. Its four amplifiers per package reduce component count, while rail-to-rail input and output operation supports operation close to the 1.4 V to 6 V supply range. The 600 nA typical current per amplifier favors distributed low-power measurement nodes. For process signals near the supply rails, verify common-mode behavior, output swing, offset voltage, and stability at the intended gain before deploying the device.

📱

Portable and Wearable Electronics

The MCP6044-E/SL addresses the power and area constraints of portable and wearable electronics through four amplifiers in a 14-pin SOIC and a 600 nA typical operating current per amplifier. Its low 1.4 V minimum supply permits direct operation from compact energy-storage cells, and rail-to-rail signal handling can improve utilization of a limited voltage range. The relatively low 14 kHz bandwidth is well matched to many physiological, environmental, and user-interface sensor channels, but it is not intended for high-frequency audio or communication signals.

🔧

Low-Voltage Instrumentation

The MCP6044-E/SL can serve as the analog front end for low-voltage instrumentation requiring several precision-oriented amplification channels. Microchip specifies a typical offset voltage below 3 mV, and rail-to-rail input and output capability helps preserve signal range in compact systems. Four channels can support differential amplifiers, non-inverting stages, buffers, or mixed instrumentation functions. Because the gain-bandwidth product is 14 kHz, engineers should choose suitable closed-loop gains, account for noise gain, and verify stability using the manufacturer's application guidance.

⚡

Low-Power Buffering and Level Translation

The MCP6044-E/SL can buffer low-frequency logic or sensor levels when a rail-to-rail output is required within a 1.4 V to 6 V system. The quad configuration provides four independent buffers in one 14-pin SOIC, and the 600 nA typical current per amplifier reduces the penalty of continuous buffering. Output swing and input common-mode limits still constrain the usable logic range, so the input and output levels must be checked against the supply voltage. The 14 kHz bandwidth is more than adequate for ordinary control signals but not for high-speed digital links.

🔋

Battery Monitoring and Protection

The MCP6044-E/SL is applicable to battery-monitoring circuits that compare sensed cell or rail voltages against thresholds. Its low typical operating current of 600 nA per amplifier is beneficial when monitoring power continuously, while operation down to 1.4 V supports low-cell-voltage systems. Rail-to-rail input and output behavior can improve measurement utilization near the supply limits. The amplifier does not provide dedicated protection, cell balancing, or continuous discharge-current sensing, so those functions must be implemented separately and reviewed against the device's common-mode limits.

What are the key specifications of MCP6044-E/SL that engineers should know?
The MCP6044-E/SL is a 4-circuit, rail-to-rail operational amplifier with a 14 kHz gain-bandwidth product and a typical operating current of 600 nA per amplifier. According to Microchip's MCP6044 product page, it operates from 1.4 V to 6 V, provides a typical offset voltage below 3 mV, and uses advanced CMOS technology. It is supplied in a 14-pin SOIC package.
What is the operating voltage of MCP6044-E/SL?
The MCP6044-E/SL operates from a single supply of 1.4 V to 6 V. Microchip's MCP6044 product information identifies 1.4 V as the minimum operating voltage and 6 V as the maximum supply voltage. This low-voltage range allows the amplifier to operate directly from low-energy battery rails and compact sensor systems.
What is the gain-bandwidth product of MCP6044-E/SL?
The MCP6044-E/SL has a 14 kHz gain-bandwidth product. According to the Microchip MCP6044 product page, this bandwidth is intended primarily for low-frequency and general-purpose analog signal conditioning. Closed-loop gain increases as operating frequency increases, so higher-gain applications must retain adequate bandwidth margin.
Is MCP6044-E/SL rail-to-rail?
Yes, the MCP6044-E/SL supports rail-to-rail input and output operation. Microchip identifies both rail-to-rail input capability and rail-to-rail output swing as family features. These characteristics allow signals to approach the supply limits more closely than a conventional amplifier with restricted common-mode or output-swing ranges.
How much current does MCP6044-E/SL consume?
The MCP6044-E/SL has a typical operating current of 600 nA per amplifier, while the maximum quiescent current is specified as less than 1 uA per amplifier. According to Microchip's MCP6044 product page, this low current supports battery-operated equipment, portable products, and wearable applications where continuous amplifier consumption can dominate the power budget.
Where can I download the MCP6044-E/SL datasheet PDF?
The official MCP6044 documentation is available through Microchip's MCP6044 product page at https://www.microchip.com/en-us/product/MCP6044. The page provides the manufacturer datasheet and device information for the MCP6044 family. Use the pin-description and electrical-characteristics tables before assigning PCB tracks or selecting external components.
Where can I find the MCP6044-E/SL pinout?
The MCP6044-E/SL pinout is published in the MCP6044 manufacturer documentation. The device uses a 14-pin SOIC with four operational-amplifier channels, power connections, and no-connect or reserved positions as specified by the package drawing. Use the manufacturer pin-description table when assigning each amplifier's inputs and outputs to PCB nets.
Is MCP6044-E/SL suitable for battery-powered sensor interfaces?
The MCP6044-E/SL is well suited to battery-powered sensor interfaces because it operates from 1.4 V to 6 V and consumes a typical 600 nA per amplifier. Microchip specifically identifies low-power battery-operated devices and portable equipment as suitable applications. Confirm the sensor output range, common-mode limits, and required closed-loop gain before finalizing the interface.
What is the best drop-in replacement for MCP6044-E/SL?
The closest documented drop-in options are Microchip MCP6044-I/SL, MCP6044T-I/SL, and MCP6044T-E/SL because they use the same 14-pin SOIC format and belong to the MCP6044 family with the same 14 kHz bandwidth class. Confirm temperature grade, packaging, and exact electrical limits against the manufacturer datasheet before replacing MCP6044-E/SL.
Can MCP6044-I/SL replace MCP6044-E/SL?
MCP6044-I/SL is a same-family 14-pin SOIC candidate, but it should be treated as a drop-in replacement only after confirming temperature-grade requirements and the exact ordering code. The family comparison identifies a 14 kHz, 600 nA, 6 V rail-to-rail amplifier architecture. Review the manufacturer ordering information for lifecycle, temperature, and reel or tube details.
MCP6044-E/SL vs MCP6044-I/SL - which is better for an industrial design?
MCP6044-I/SL is the more logical candidate when an industrial design requires the MCP6044 family in its industrial temperature grade, while MCP6044-E/SL suits designs that meet the extended grade's limits. Both are 14-pin SOIC devices with the same 14 kHz gain-bandwidth and 600 nA typical operating-current figures. Confirm the exact temperature limits in the ordering table.
When should I choose MCP6044-E/SL over a higher-bandwidth amplifier?
Choose MCP6044-E/SL when the signal bandwidth is low, four low-power channels are needed, and rail-to-rail operation at a 1.4 V minimum supply is more valuable than high speed. Its 14 kHz gain-bandwidth product and 600 nA typical current per amplifier suit sensor buffering and low-frequency instrumentation, but they are insufficient for high-speed signal chains.
Where to buy MCP6044-E/SL online?
Use the Request a Quote form on this page to request MCP6044-E/SL availability, order quantities, and delivery information for the exact 14-pin SOIC ordering code. This avoids ambiguity with different MCP6044 package and temperature-grade variants. Provide the target quantity, packaging preference, and required compliance documentation with the request.
What is the price of MCP6044-E/SL?
The current unit and volume pricing for MCP6044-E/SL is shown through the Request a Quote form on this page. Submit the required quantity and desired delivery terms to obtain a current quotation for the exact MPN. For design budgeting, the product's 14 kHz bandwidth and 600 nA typical current per amplifier are the more relevant selection constraints.
What is the lead time for MCP6044-E/SL and is it in stock?
Current stock status and lead time for MCP6044-E/SL should be confirmed through the Request a Quote form on this page. Include the required quantity, date-code preference, and packaging requirements so the quotation reflects the exact MCP6044-E/SL ordering code. Microchip's product page lists the device in 14-lead PDIP, SOIC, and TSSOP options, but the SOIC designation must remain part of the request.
What is the best cross-brand equivalent for MCP6044-E/SL?
A cross-brand equivalent should be selected only after its 14-pin SOIC pinout, rail-to-rail behavior, supply range, gain-bandwidth product, and operating current have been verified against MCP6044-E/SL. No verified cross-brand candidate is established on this page. Use the MCP6044 family alternatives for immediate same-package evaluation and request manufacturer documentation for any cross-brand migration.

엔지니어링 참조 데이터: MCP6044-E/SL — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose MCP6044-E/SL for low-frequency analog designs requiring four rail-to-rail amplifier channels, a 1.4 V minimum supply, and a typical operating current of 600 nA per amplifier. Select MCP6044-I/SL when the design requires the family's industrial temperature grade while retaining the same 14-pin SOIC footprint. MCP6044T-I/SL is appropriate when that industrial-grade option is required with the specified packing ordering. MCP6044T-E/SL shares the E-grade electrical class and can be evaluated when its packing format matches procurement requirements. These parts are intended for sensor buffering, process-control interfaces, portable equipment, and low-voltage instrumentation. They are not appropriate when the required signal bandwidth substantially exceeds the family's 14 kHz gain-bandwidth product. For any replacement, verify the exact pinout, temperature limits, supply limits, output swing, and stability requirements in the manufacturer documentation before approving the substitution.

대체품과의 비교

파라미터 이 제품 MCP6044-I/SL MCP6044T-I/SL MCP6044T-E/SL
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Amplifier Count 4 amplifiers 4 amplifiers 4 amplifiers 4 amplifiers
Gain-Bandwidth Product 14 kHz 14 kHz 14 kHz 14 kHz
Typical Operating Current 600 nA per amplifier 600 nA per amplifier 600 nA per amplifier 600 nA per amplifier
Supply Voltage Range 1.4 V to 6 V 1.4 V to 6 V 1.4 V to 6 V 1.4 V to 6 V
Input and Output Operation Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output
Slew Rate 0.003 V/us 0.003 V/us 0.003 V/us 0.003 V/us
Temperature Grade E grade I grade I grade E grade
Price Current quotation required Current quotation required Current quotation required Current quotation required

주요 차별점

  • Four amplifiers in one compact 14-pin SOIC (vs MCP6044-I/SL)
  • Very low typical operating current for a quad amplifier (vs MCP6044T-I/SL)
  • Low-voltage rail-to-rail operation (vs MCP6044T-E/SL)

설계 노트

Do not treat the 14 kHz gain-bandwidth product as a 14 kHz usable bandwidth at every gain. Closed-loop bandwidth depends on the selected gain and noise gain, while capacitive loading can further alter stability. Use the manufacturer stability and electrical-characteristics tables, place feedback components close to the amplifier pins, and avoid driving long PCB traces from the output.

Account for both amplifier quiescent current and load current when sizing a 1.4 V to 6 V supply. The typical operating current is 600 nA per amplifier, but output current, input bias current, leakage, and external-network consumption may dominate the total. Decouple each supply rail near the package with the capacitance specified by the manufacturer, and keep return currents away from sensitive input traces.

Route each amplifier's inverting input, non-inverting input, and output as short as practical, especially for high-gain configurations. Keep the SOIC footprint free of unintended solder bridges between the closely spaced leads, verify the manufacturer's pin numbering before PCB release, and maintain a quiet return path. Guard techniques may help on high-impedance inputs, but their effect should be checked against temperature and leakage requirements.

Check the input common-mode range and output swing against the actual signal and supply levels before treating the device as a full rail-to-rail interface. Rail-to-rail operation reduces headroom constraints but does not eliminate output-current, slew-rate, or load limitations. For low-frequency sensor signals, place input filtering close to the source and validate that added capacitance does not compromise stability.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer or lot documentation. The MCP6044-E/SL is a general-purpose industrial amplifier rather than an explicitly automotive-qualified ordering code.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

mcp6044 datasheet MCP6044-E/SL datasheet MCP6044-E/SL datasheet pdf MCP6044-E/SL pinout MCP6044-E/SL specifications MCP6044-E/SL equivalent MCP6044-E/SL replacement MCP6044-E/SL cross reference MCP6044-E/SL footprint MCP6044-E/SL price MCP6044-E/SL stock Microchip MCP6044-E/SL MCP6044-E/SL vs MCP6044-I/SL MCP6044 14kHz quad op amp

관련 부품 & 용어

Microchip Technology MCP6044-E/SL MCP6044 MCP6044-I/SL MCP6044T-I/SL MCP6044T-E/SL operational amplifier quad amplifier general-purpose amplifier rail-to-rail input rail-to-rail output CMOS technology gain-bandwidth product quiescent current offset voltage slew rate low-dropout power 14-pin SOIC SOIC package family surface-mount package sensor signal conditioning industrial process control battery-operated equipment portable equipment wearable electronics
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기