MCP609T-I/SL - 155 kHz Quad CMOS Op Amp | Microchip Technology
MPN: MCP609T-I/SL ✓ AktifMCP609T-I/SL Ringkasan
A CMOS operational amplifier is a voltage-feedback amplifier that uses complementary metal-oxide-semiconductor transistors for low bias current and low static power consumption. The MCP609 belongs to the operational amplifier hierarchy, which sits within analog and mixed-signal integrated circuits. Its rail-to-rail output swing, unity-gain stability, and low input bias current make it useful for portable instrumentation, sensor interfaces, battery-powered equipment, and general-purpose signal amplification.
Key features include four amplifiers in one 14-pin SOIC, operation from 2.5 V to 6.0 V, 155 kHz gain-bandwidth product, typical operating current of 18.7 uA, input offset voltage below 250 uV, and input bias current of 80 pA maximum at 85 C. The low-noise input characteristics support accurate amplification of signals from sensors and transducers while the micropower architecture limits energy use in battery-operated systems.
The MCP609 uses Microchip's advanced CMOS technology to provide low bias current, high open-loop gain, and rail-to-rail output swing. It is unity-gain stable, allowing the same amplifier configuration to be used for voltage followers, non-inverting amplifiers, and inverting amplifiers. The 155 kHz bandwidth is sufficient for low-frequency precision and instrumentation applications rather than high-speed signal processing.
Typical uses include portable sensor measurement, battery-powered monitoring, current sensing, low-level signal conditioning, audio and communication interfaces, and general embedded analog systems. The device is particularly appropriate when a design requires several amplifiers while maintaining a small PCB footprint and low supply current.
When designing around the MCP609T-I/SL, maintain adequate input and output common-mode range for the selected gain and load. Decouple the supply pins with a local bypass capacitor and route the ground connection carefully to avoid adding noise to the amplified signal. The 14-pin SOIC package permits conventional surface-mount assembly and simplifies replacement of a quad amplifier with another pin-compatible family member.
This product summary combines the manufacturer device information with package, parameter, and sourcing context. It highlights the operating range, bandwidth, offset, power, and application fit that engineers can compare against other micropower quad CMOS operational amplifiers.
Alternatif penggantian untuk MCP609T-I/SL — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MCP609T-I/SL (sama faktor bentuk dan footprint) — berbeda di dalam Input Offset Voltage, Supply Voltage Range.
MCP609T-I/SLVAO
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MCP609-I/SL
✅ Drop-InKontak untuk harga
Lihat Datasheet →MCP609TI/SL
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MCP609T-I/SL Rating Maksimal & Karakteristik Listrik
| Number of Amplifiers | 4 circuits |
| Device Type | CMOS operational amplifier |
| Supply Voltage Range | 2.5 V to 6.0 V |
| Gain-Bandwidth Product | 155 kHz |
| Typical Operating Current | 18.7 uA |
| Input Offset Voltage | Less than 250 uV |
| Maximum Offset Voltage | 250 uV |
| Input Bias Current | 80 pA maximum at +85 C |
| Output Swing | Rail-to-rail |
| Open-Loop Gain | High open-loop gain |
| Gain Stability | Unity-gain stable |
| Operating Current | 25 uA |
| Paket | 14-pin SOIC |
| Package Dimensions | 3.9 mm |
| Temperature Grade | Industrial temperature option indicated by -I |
| Status RoHS | Compliant |
| Lead-Free Status | Lead-free package indicated in product data |
| Automotive Qualification | AEC-Q100 available in MCP609T-I/SLVAO variant |
MCP609T-I/SL 3.9 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk MCP609T-I/SL (3.9 mm pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk MCP609T-I/SL.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MCP609T-I/SL cocok untuk 6 aplikasis: Portable Sensor Signal Conditioning, Battery-Powered Monitoring Equipment, Current-Sensing Amplifier Interface, Low-Level Voltage Amplification, Industrial 5 V Analog Front End, Automotive Low-Power Signal Conditioning.
Portable Sensor Signal Conditioning
The MCP609T-I/SL is appropriate for conditioning signals from low-power sensors operated from a 2.5 V to 6.0 V rail. Its 18.7 uA typical operating current limits static demand, while input bias current of 80 pA maximum at 85 C reduces loading on high-impedance sources. Four amplifiers in one 14-pin SOIC allow the design to implement buffering, gain, and active filtering without using separate single amplifier packages. The 155 kHz gain-bandwidth product is suitable for many low-frequency measurement channels, but sensor bandwidth and capacitive loading should be checked before setting a high closed-loop gain.
Direkomendasikan
Battery-Powered Monitoring Equipment
The MCP609T-I/SL supports compact battery-powered monitors by combining four amplifiers with low operating current and a single-supply range from 2.5 V to 6.0 V. The 18.7 uA typical operating current is particularly useful when the instrument spends most of its time measuring slowly changing sensor signals rather than processing high-bandwidth waveforms. The 14-pin SOIC keeps the amplifier count and PCB area manageable, while rail-to-rail output swing supports operation near the available supply range. Designers should still budget for load current, regulator quiescent current, leakage through external networks, and the selected energy-storage source.
Direkomendasikan
Current-Sensing Amplifier Interface
The MCP609T-I/SL can amplify the small voltage produced by a current-sense resistor in portable power measurement systems. Its offset voltage below 250 uV helps preserve accuracy when the sense voltage is small, and the low input bias current avoids disturbing the sensed node. Because the amplifier is unity-gain stable, it can also support non-inverting and inverting gain configurations around a sense resistor. The 155 kHz bandwidth is appropriate for many low-bandwidth current measurements, while the 2.5 V minimum supply supports compact 3 V and 5 V systems. Verify the shunt resistance, common-mode range, output swing, and amplifier noise before finalizing the gain.
Direkomendasikan
Low-Level Voltage Amplification
The MCP609T-I/SL is suitable for low-level voltage amplification when a design needs low offset, low bias current, and low supply power. The manufacturer specifies input offset voltage below 250 uV and input bias current of 80 pA maximum at 85 C, helping preserve weak signals from resistive dividers, transducer outputs, and sensing networks. Its 155 kHz gain-bandwidth product supports closed-loop gains appropriate to low-frequency instrumentation, but the usable bandwidth narrows as the selected gain increases. Use the manufacturer electrical-characteristics table and stability guidance to confirm noise, output loading, and common-mode limits for the actual feedback network.
Direkomendasikan
Industrial 5 V Analog Front End
The MCP609T-I/SL can form the analog front end of a 5 V industrial control or measurement board when low power and compact integration are priorities. The 2.5 V to 6.0 V supply range includes a 5 V rail, and the quad topology provides multiple channels for excitation, buffering, amplification, and active filtering. Rail-to-rail output swing increases the usable output range, while the 14-pin SOIC supports standard surface-mount assembly. Industrial designs should verify the exact -I temperature-grade requirements, input and output behavior at the selected common-mode voltage, power consumption during the intended duty cycle, and the stability of the selected feedback components.
Direkomendasikan
Automotive Low-Power Signal Conditioning
MCP609T-I/SLVAO is the automotive-oriented option for low-power signal conditioning because it is identified as an AEC-Q100 quad 2.5 V operational amplifier with a 155 kHz gain-bandwidth product. It is relevant to body, sensing, and interface circuits where low offset below 250 uV and low 18.7 uA typical operating current are useful. The four-channel 14-pin SOIC arrangement can reduce board area compared with four separate amplifiers. For a production automotive design, select the VAO-qualified order code, follow the automotive-grade ordering and qualification requirements, and confirm that the exact package, temperature range, and electrical limits meet the vehicle platform specification.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MCP609T-I/SL — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MCP609T-I/SLVAO | MCP609-I/SL | MCP609TI/SL |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Number of Amplifiers | 4 circuits | Quad | Quad | Quad |
| Device Type | Micropower CMOS operational amplifier | Automotive-grade CMOS operational amplifier | CMOS operational amplifier | CMOS operational amplifier |
| Supply Voltage Range | 2.5 V to 6.0 V | 2.5 V to 6.0 V | 2.5 V to 6.0 V | 2.5 V to 6.0 V |
| Gain-Bandwidth Product | 155 kHz | 155 kHz | 155 kHz | 155 kHz |
| Maximum Offset Voltage | 250 uV | 250 uV | 250 uV | 250 uV |
| Output Swing | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
Diferensiator Kunci
- Four micropower amplifiers in one 14-pin SOIC (vsMCP609-I/SL)
- Low input offset supports weak-signal conditioning (vsMCP609T-I/SLVAO)
- Automotive qualification is available in a related order code (vsMCP609T-I/SL)
Catatan Desain
Place the supply bypass capacitor close to the VDD pin and connect the VSS pins to the quiet ground return. The MCP609 is specified with a typical operating current of 18.7 uA, so the amplifier's own static demand is low, but external feedback networks and loads can dominate the total current. Keep high-current return paths separate from the input reference node to prevent supply and ground disturbances from appearing as input error.
Do not assume that every similarly suffixed MCP609 order code is a production equivalent. The automotive MCP609T-I/SLVAO has an AEC-Q100 designation, while MCP609-I/SL and MCP609TI/SL use different ordering conventions. Confirm the package, temperature grade, qualification, and customer-specific approved-part list before replacing MCP609T-I/SL. This avoids accepting a mechanically similar part with different qualification or marking requirements.
The 155 kHz gain-bandwidth product becomes less available as closed-loop gain increases. Select feedback resistors and capacitors that preserve the required signal bandwidth, and keep sensitive input traces short and away from supply and digital routing. For high-impedance sensors, minimize leakage from adjacent boards and connectors because even the low 80 pA maximum input bias current at 85 C can create an error when the source impedance is extremely high.
Informasi Konformitas
RoHS compliance and a lead-free plastic SOIC package are identified in the product listing. AEC-Q100 qualification is associated with the MCP609T-I/SLVAO automotive variant rather than the target ordering code.