Microchip Technology

MCP609T-I/SL - 155 kHz Quad CMOS Op Amp | Microchip Technology

MPN: MCP609T-I/SL ✓ فعال
2.5 V to 6.0 V Vdss 18.7 uA Id 14-pin SOIC Package
MOQ: 1 |

MCP609T-I/SL جائزہ

The Microchip Technology MCP609T-I/SL is a micropower CMOS quad operational amplifier with a 155 kHz gain-bandwidth product, 250 uV maximum offset voltage, and 25 uA typical operating current. It operates from a single 2.5 V to 6.0 V supply and uses a 14-pin SOIC package. The device is designed for low-voltage, low-power signal-conditioning systems where four amplifiers are required in one package.

A CMOS operational amplifier is a voltage-feedback amplifier that uses complementary metal-oxide-semiconductor transistors for low bias current and low static power consumption. The MCP609 belongs to the operational amplifier hierarchy, which sits within analog and mixed-signal integrated circuits. Its rail-to-rail output swing, unity-gain stability, and low input bias current make it useful for portable instrumentation, sensor interfaces, battery-powered equipment, and general-purpose signal amplification.

Key features include four amplifiers in one 14-pin SOIC, operation from 2.5 V to 6.0 V, 155 kHz gain-bandwidth product, typical operating current of 18.7 uA, input offset voltage below 250 uV, and input bias current of 80 pA maximum at 85 C. The low-noise input characteristics support accurate amplification of signals from sensors and transducers while the micropower architecture limits energy use in battery-operated systems.

The MCP609 uses Microchip's advanced CMOS technology to provide low bias current, high open-loop gain, and rail-to-rail output swing. It is unity-gain stable, allowing the same amplifier configuration to be used for voltage followers, non-inverting amplifiers, and inverting amplifiers. The 155 kHz bandwidth is sufficient for low-frequency precision and instrumentation applications rather than high-speed signal processing.

Typical uses include portable sensor measurement, battery-powered monitoring, current sensing, low-level signal conditioning, audio and communication interfaces, and general embedded analog systems. The device is particularly appropriate when a design requires several amplifiers while maintaining a small PCB footprint and low supply current.

When designing around the MCP609T-I/SL, maintain adequate input and output common-mode range for the selected gain and load. Decouple the supply pins with a local bypass capacitor and route the ground connection carefully to avoid adding noise to the amplified signal. The 14-pin SOIC package permits conventional surface-mount assembly and simplifies replacement of a quad amplifier with another pin-compatible family member.

This product summary combines the manufacturer device information with package, parameter, and sourcing context. It highlights the operating range, bandwidth, offset, power, and application fit that engineers can compare against other micropower quad CMOS operational amplifiers.

کے لیے ڈراپ اِن متبادل MCP609T-I/SL — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MCP609T-I/SL (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Input Offset Voltage, Supply Voltage Range.

Microchip Technology
Input Offset Voltage: <250 uV
Supply Voltage Range: 2.5 V to 5.5 V

MCP609T-I/SLVAO

✅ ڈراپ-اِن
📦 14-pin SOIC
Automotive AEC-Q100 qualification is added; listed key ratings remain 155 kHz gain-bandwidth product, 250 uV maximum offset, and 2.5 V minimum supply voltage.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MCP609-I/SL

✅ ڈراپ-اِن
Microchip Technology
📦 14-pin SOIC
Quad operational amplifier · 4 channels · 155 kHz · 18.7 uA · <250 uV · 2.5 V to 5.5 V · 6.0 V · Rail-to-rail

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

MCP609TI/SL

✅ ڈراپ-اِن
📦 14-pin SOIC
Ordering suffix formatting differs from MCP609T-I/SL; the catalog comparison identifies the same MCP609 family, but the official ordering code must be confirmed before use.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MCP609T-I/SL زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Number of Amplifiers 4 circuits
Device Type CMOS operational amplifier
Supply Voltage Range 2.5 V to 6.0 V
Gain-Bandwidth Product 155 kHz
Typical Operating Current 18.7 uA
Input Offset Voltage Less than 250 uV
Maximum Offset Voltage 250 uV
Input Bias Current 80 pA maximum at +85 C
Output Swing Rail-to-rail
Open-Loop Gain High open-loop gain
Gain Stability Unity-gain stable
Operating Current 25 uA
پیکیج 14-pin SOIC
Package Dimensions 3.9 mm
Temperature Grade Industrial temperature option indicated by -I
RoHS اسٹیٹس Compliant
Lead-Free Status Lead-free package indicated in product data
Automotive Qualification AEC-Q100 available in MCP609T-I/SLVAO variant

MCP609T-I/SL 3.9 mm پن کنفیگریشن گائیڈ

MCP609T-I/SL (3.9 mm پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

MCP609T-I/SL کے لیے 3.9 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MCP609T-I/SL.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MCP609T-I/SL کے لیے موزوں ہے 6 ایپلیکیشنs: Portable Sensor Signal Conditioning, Battery-Powered Monitoring Equipment, Current-Sensing Amplifier Interface, Low-Level Voltage Amplification, Industrial 5 V Analog Front End, Automotive Low-Power Signal Conditioning.

🧩

Portable Sensor Signal Conditioning

The MCP609T-I/SL is appropriate for conditioning signals from low-power sensors operated from a 2.5 V to 6.0 V rail. Its 18.7 uA typical operating current limits static demand, while input bias current of 80 pA maximum at 85 C reduces loading on high-impedance sources. Four amplifiers in one 14-pin SOIC allow the design to implement buffering, gain, and active filtering without using separate single amplifier packages. The 155 kHz gain-bandwidth product is suitable for many low-frequency measurement channels, but sensor bandwidth and capacitive loading should be checked before setting a high closed-loop gain.

🔋

Battery-Powered Monitoring Equipment

The MCP609T-I/SL supports compact battery-powered monitors by combining four amplifiers with low operating current and a single-supply range from 2.5 V to 6.0 V. The 18.7 uA typical operating current is particularly useful when the instrument spends most of its time measuring slowly changing sensor signals rather than processing high-bandwidth waveforms. The 14-pin SOIC keeps the amplifier count and PCB area manageable, while rail-to-rail output swing supports operation near the available supply range. Designers should still budget for load current, regulator quiescent current, leakage through external networks, and the selected energy-storage source.

⚡

Current-Sensing Amplifier Interface

The MCP609T-I/SL can amplify the small voltage produced by a current-sense resistor in portable power measurement systems. Its offset voltage below 250 uV helps preserve accuracy when the sense voltage is small, and the low input bias current avoids disturbing the sensed node. Because the amplifier is unity-gain stable, it can also support non-inverting and inverting gain configurations around a sense resistor. The 155 kHz bandwidth is appropriate for many low-bandwidth current measurements, while the 2.5 V minimum supply supports compact 3 V and 5 V systems. Verify the shunt resistance, common-mode range, output swing, and amplifier noise before finalizing the gain.

🔧

Low-Level Voltage Amplification

The MCP609T-I/SL is suitable for low-level voltage amplification when a design needs low offset, low bias current, and low supply power. The manufacturer specifies input offset voltage below 250 uV and input bias current of 80 pA maximum at 85 C, helping preserve weak signals from resistive dividers, transducer outputs, and sensing networks. Its 155 kHz gain-bandwidth product supports closed-loop gains appropriate to low-frequency instrumentation, but the usable bandwidth narrows as the selected gain increases. Use the manufacturer electrical-characteristics table and stability guidance to confirm noise, output loading, and common-mode limits for the actual feedback network.

🏭

Industrial 5 V Analog Front End

The MCP609T-I/SL can form the analog front end of a 5 V industrial control or measurement board when low power and compact integration are priorities. The 2.5 V to 6.0 V supply range includes a 5 V rail, and the quad topology provides multiple channels for excitation, buffering, amplification, and active filtering. Rail-to-rail output swing increases the usable output range, while the 14-pin SOIC supports standard surface-mount assembly. Industrial designs should verify the exact -I temperature-grade requirements, input and output behavior at the selected common-mode voltage, power consumption during the intended duty cycle, and the stability of the selected feedback components.

🚗

Automotive Low-Power Signal Conditioning

MCP609T-I/SLVAO is the automotive-oriented option for low-power signal conditioning because it is identified as an AEC-Q100 quad 2.5 V operational amplifier with a 155 kHz gain-bandwidth product. It is relevant to body, sensing, and interface circuits where low offset below 250 uV and low 18.7 uA typical operating current are useful. The four-channel 14-pin SOIC arrangement can reduce board area compared with four separate amplifiers. For a production automotive design, select the VAO-qualified order code, follow the automotive-grade ordering and qualification requirements, and confirm that the exact package, temperature range, and electrical limits meet the vehicle platform specification.

تجویز کردہ پروڈکٹس کا خلاصہ

MCP609T-I/SLVAO AEC-Q100-qualified related quad amplifier for automotive sensor interfaces استعمال ہوتا ہے: Portable Sensor Signal Conditioning, Current-Sensing Amplifier Interface, Low-Level Voltage Amplification, Automotive Low-Power Signal Conditioning MCP609-I/SL Microchip Technology استعمال ہوتا ہے: Portable Sensor Signal Conditioning, Battery-Powered Monitoring Equipment, Current-Sensing Amplifier Interface, Low-Level Voltage Amplification, Industrial 5 V Analog Front End MCP609TI/SL Related MCP609 ordering option استعمال ہوتا ہے: Battery-Powered Monitoring Equipment, Industrial 5 V Analog Front End MCP609T-I/SL Microchip Technology استعمال ہوتا ہے: Automotive Low-Power Signal Conditioning
What is the operating voltage of MCP609T-I/SL?
The MCP609T-I/SL operates from 2.5 V to 6.0 V with a single supply. According to the Microchip Technology MCP609 product information, this range supports low-voltage portable and embedded systems. The part is a quad CMOS operational amplifier, so all four amplifier channels use the same supply pins. Check the input common-mode and output swing requirements in the manufacturer datasheet when operating near the lower or upper supply limit.
What are the key specifications of MCP609T-I/SL?
The MCP609T-I/SL provides four CMOS operational amplifiers, a 155 kHz gain-bandwidth product, 18.7 uA typical operating current, and input offset voltage below 250 uV. The Microchip Technology MCP609 product information also identifies rail-to-rail output swing and input bias current of 80 pA maximum at 85 C. These specifications make the device suitable for micropower sensor interfaces, portable measurement systems, and general low-voltage analog signal conditioning.
Where can I download the MCP609T-I/SL datasheet PDF?
The manufacturer datasheet for MCP609T-I/SL is available through the Microchip Technology MCP609 product page and the linked Microchip product documentation. The product is also described as a 2.5 V to 6.0 V micropower CMOS op amp in the manufacturer listing. Use the official MCP609 product page for the current datasheet revision, package drawings, electrical characteristics, and ordering information.
Where can I find the MCP609T-I/SL pinout?
The MCP609T-I/SL uses a 14-pin SOIC package, and the complete pin assignment is shown in the pin-description table in the Microchip Technology MCP609 datasheet. The verified product information identifies the device as a four-circuit amplifier in a 14-SOIC package. Use that table when assigning each amplifier channel, supply pins, and ground connections on the PCB.
Is MCP609T-I/SL suitable for battery-powered sensor applications?
Yes, the MCP609T-I/SL is suitable for battery-powered sensor applications because it combines four amplifiers with a typical operating current of 18.7 uA and a 2.5 V to 6.0 V supply range. The low input bias current, specified as 80 pA maximum at 85 C, also helps minimize loading on high-impedance sensors. Actual battery life depends on the signal bandwidth, load, operating temperature, and regulator efficiency.
How much current does MCP609T-I/SL consume?
The MCP609T-I/SL has a typical operating current of 18.7 uA, while product listings also identify the device as a 25 uA quad micropower op amp. According to the Microchip Technology MCP609 product information, the typical operating-current specification is the key figure for low-power design estimation. Use the manufacturer electrical-characteristics table for the complete test conditions and maximum-versus-typical distinctions.
What is the gain-bandwidth product of MCP609T-I/SL?
The MCP609T-I/SL has a gain-bandwidth product of 155 kHz. The Microchip Technology MCP609 product page identifies the quad amplifier as a micropower CMOS op amp with this bandwidth. This speed is appropriate for low-frequency analog signal conditioning, sensor interfaces, and voltage-following circuits, but it should be compared with the required signal bandwidth when designing filtering or audio applications.
Can MCP609T-I/SL amplify signals from high-impedance sensors?
Yes, the MCP609T-I/SL is well suited to many high-impedance sensor interfaces because the Microchip Technology MCP609 family specifies low input bias current, with 80 pA maximum at 85 C. Its unity-gain stability also permits direct voltage-following configurations. Sensor output capacitance, leakage current, noise, and required settling time should still be checked against the application bandwidth.
What is the difference between MCP609T-I/SL and MCP609-I/SL?
Both are Microchip Technology MCP609 quad operational amplifiers in the same 14-pin SOIC family, but the orderable suffix indicates the temperature-grade option. The MCP609T-I/SL includes the -I industrial-grade designation, while MCP609-I/SL is listed as the related catalog variant. Review the manufacturer ordering table to confirm the exact temperature range and any grade-specific marking before substitution.
What is the difference between MCP609T-I/SL and MCP609T-I/SLVAO?
The MCP609T-I/SLVAO is the automotive-grade AEC-Q100 version of the MCP609 family, while MCP609T-I/SL is the catalog ordering option identified as the quad 2.5 V to 6.0 V micropower amplifier. The comparison information identifies both as 155 kHz devices with 250 uV maximum offset and a 2.5 V minimum supply voltage. For automotive production, use the VAO-qualified ordering option and confirm its full temperature and qualification requirements.
When should I choose MCP609T-I/SL over MCP609-I/SL?
Choose MCP609T-I/SL when the design calls for the -I industrial-grade ordering designation and the MCP609 family's micropower CMOS performance. Both parts are associated with the same quad 14-SOIC amplifier architecture, so the decision should be based on the exact temperature grade, qualification, availability, and approved BOM requirements. Confirm the complete ordering table before production release.
What is the best drop-in replacement for MCP609T-I/SL?
MCP609T-I/SLVAO is a closely related pin-compatible choice when automotive qualification is required, while MCP609-I/SL is the related catalog variant with a different suffix designation. The verified comparison information identifies the automotive version as AEC-Q100 and shows the same 155 kHz gain-bandwidth product, 250 uV maximum offset, and 2.5 V minimum supply voltage. Verify the exact pinout and ordering suffix before substitution.
Is MCP609T-I/SL the same as MCP609T-I/SLVAO?
No. MCP609T-I/SLVAO is the automotive-grade AEC-Q100 ordering variant, whereas MCP609T-I/SL is the standard catalog part. The related comparison lists both as quad 155 kHz, 2.5 V minimum-supply devices with 250 uV maximum offset. They are closely related electrically, but qualification, temperature, marking, and purchasing requirements must be checked before treating the VAO suffix as interchangeable.
What is the best Microchip Technology equivalent for MCP609T-I/SL?
MCP609T-I/SLVAO is the most directly identified related Microchip ordering option because it uses the same MCP609 quad 155 kHz amplifier family and adds automotive AEC-Q100 qualification. MCP609-I/SL is another related catalog MPN. Because suffix conventions affect temperature grade and qualification, confirm the exact MCP609 ordering table and your production qualification requirements before selecting a replacement.
Where to buy MCP609T-I/SL online?
Use the Request a Quote form on this page to request MCP609T-I/SL availability, lead time, and order details. The manufacturer and distributor listings identify the exact 14-SOIC ordering code, but live inventory and commercial terms can change. Provide the required quantity, delivery location, and target date with the quote request so the current supply position can be confirmed.
What is the price and lead time of MCP609T-I/SL?
The current price and lead time for MCP609T-I/SL should be confirmed through the Request a Quote form on this page. Commercial terms depend on quantity, package suffix, inventory, and delivery requirements. The structured pricing area is updated separately from the technical product description, so use the quote request rather than relying on an outdated catalog price for procurement.

کے لیے انجینئرنگ ریفرنس ڈیٹا MCP609T-I/SL — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose MCP609T-I/SL for a compact, low-voltage design that needs four CMOS amplifiers with low offset, low bias current, and low operating current. It is particularly suitable for portable sensor interfaces, battery-powered monitors, current-sense amplification, and low-level analog signal conditioning. Select MCP609T-I/SLVAO when the design requires the related automotive AEC-Q100 ordering option rather than the standard catalog designation. Use MCP609-I/SL when its temperature and ordering suffix satisfy the product requirements, and verify the manufacturer ordering table before release. MCP609TI/SL is a closely related catalog naming option whose exact production code should also be confirmed. Because the verified alternatives are tightly related members of the same family, the main selection criteria are qualification, temperature grade, exact suffix, package, and supply availability rather than large differences in bandwidth or offset.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ MCP609T-I/SLVAO MCP609-I/SL MCP609TI/SL
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Number of Amplifiers 4 circuits Quad Quad Quad
Device Type Micropower CMOS operational amplifier Automotive-grade CMOS operational amplifier CMOS operational amplifier CMOS operational amplifier
Supply Voltage Range 2.5 V to 6.0 V 2.5 V to 6.0 V 2.5 V to 6.0 V 2.5 V to 6.0 V
Gain-Bandwidth Product 155 kHz 155 kHz 155 kHz 155 kHz
Maximum Offset Voltage 250 uV 250 uV 250 uV 250 uV
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail

اہم امتیازی خصوصیات

  • Four micropower amplifiers in one 14-pin SOIC (بمقابلہMCP609-I/SL)
  • Low input offset supports weak-signal conditioning (بمقابلہMCP609T-I/SLVAO)
  • Automotive qualification is available in a related order code (بمقابلہMCP609T-I/SL)

ڈیزائن نوٹس

Place the supply bypass capacitor close to the VDD pin and connect the VSS pins to the quiet ground return. The MCP609 is specified with a typical operating current of 18.7 uA, so the amplifier's own static demand is low, but external feedback networks and loads can dominate the total current. Keep high-current return paths separate from the input reference node to prevent supply and ground disturbances from appearing as input error.

Do not assume that every similarly suffixed MCP609 order code is a production equivalent. The automotive MCP609T-I/SLVAO has an AEC-Q100 designation, while MCP609-I/SL and MCP609TI/SL use different ordering conventions. Confirm the package, temperature grade, qualification, and customer-specific approved-part list before replacing MCP609T-I/SL. This avoids accepting a mechanically similar part with different qualification or marking requirements.

The 155 kHz gain-bandwidth product becomes less available as closed-loop gain increases. Select feedback resistors and capacitors that preserve the required signal bandwidth, and keep sensitive input traces short and away from supply and digital routing. For high-impedance sensors, minimize leakage from adjacent boards and connectors because even the low 80 pA maximum input bias current at 85 C can create an error when the source impedance is extremely high.

تعمیل کی معلومات

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Qualified
لیڈ فری
Yes
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

RoHS compliance and a lead-free plastic SOIC package are identified in the product listing. AEC-Q100 qualification is associated with the MCP609T-I/SLVAO automotive variant rather than the target ordering code.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-15 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

MCP609T-I/SL datasheet MCP609T-I/SL pinout MCP609T-I/SL datasheet pdf MCP609T-I/SL specifications MCP609T-I/SL price MCP609T-I/SL stock MCP609T-I/SL equivalent MCP609T-I/SL replacement MCP609T-I/SL vs MCP609T-I/SLVAO MCP609T-I/SL 14 pin SOIC MCP609T-I/SL sensor amplifier Microchip Technology MCP609T-I/SL

متعلقہ اجزاء اور اصطلاحات

Microchip Technology MCP609T-I/SL MCP609 MCP609T-I/SLVAO MCP609-I/SL MCP609TI/SL Operational amplifier Op amp Quad amplifier CMOS operational amplifier Micropower amplifier Low-dropout-independent analog IC Analog integrated circuit Mixed-signal integrated circuit Rail-to-rail output Unity-gain stable 155 kHz gain-bandwidth product 250 uV offset voltage 18.7 uA operating current 80 pA input bias current 2.5 V to 6.0 V supply 14-pin SOIC SOIC package family Surface mount SMD RoHS AEC-Q100 Portable sensor interface Battery-powered monitoring Current-sense amplification
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں