Microchip Technology

MCP6284-E/P - Quad 5MHz Rail-to-Rail Op Amp | Microchip

MPN: MCP6284-E/P ✓ Aktif
2.2 V to 5.5 V Vdss 450 µA typical per amplifier Id 14-pin DIP, 0.300 inch (7.62 mm) Package
MOQ: 1 |

MCP6284-E/P Ringkasan

The Microchip Technology MCP6284-E/P is a quad general-purpose operational amplifier with rail-to-rail input and output capability, 5 MHz gain-bandwidth product, 2.5 V/µs slew rate, and operation from a single 2.2 V to 5.5 V supply. The device is packaged in a 14-pin 0.300 inch, 7.62 mm dual in-line package.

An operational amplifier, or op amp, is an analog semiconductor that amplifies the difference between two input voltages. The MCP6284 belongs to the general-purpose op amp category within the broader analog IC and signal-conditioning hierarchy. Its four independent amplifiers can be used for voltage buffering, gain stages, active filtering, instrumentation, sensor interfaces, and low-frequency signal processing.

Key features include a 5 MHz gain-bandwidth product and 65° phase margin, which support stable operation in a wide range of feedback networks. The rail-to-rail input and output swing allows the amplifier to operate close to the supply rails, improving useful signal range in low-voltage systems. Typical quiescent current is 450 µA per amplifier, helping reduce power consumption in portable and low-power designs.

The MCP6284-E/P uses a general-purpose, low-power amplifier architecture intended for single-supply operation. Because it is specified from 2.2 V to 5.5 V, the device can operate directly from 3.3 V and 5 V rails. The 2.5 V/µs slew rate is useful for signals that require faster transitions than a low-bandwidth precision amplifier can provide, while the rail-to-rail output improves dynamic range when the operating voltage is constrained.

Typical applications include sensor signal conditioning, audio and communication signal paths, active filters, data-acquisition front ends, buffer stages, and general-purpose analog control circuits. The 14-pin DIP package also makes the MCP6284-E/P convenient for prototyping, educational platforms, through-hole assembly, and applications where a socketed or easily inspectable package is preferred.

When designing a circuit around the MCP6284-E/P, verify the input common-mode range, output swing, capacitive-load stability, and noise performance against the actual signal conditions. Place bypass capacitors close to the supply pins and use short feedback paths to reduce parasitic effects. The quad configuration allows independent amplifiers to share a supply arrangement, but each amplifier should be evaluated independently for stability, offset, noise, and output-current requirements.

This product page combines the manufacturer family specifications, package information, sourcing links, pin assignment, application guidance, and practical design notes to support faster engineering decisions. For the most detailed electrical limits, test conditions, and ordering information, use the official Microchip MCP6284 product page and the linked manufacturer datasheet.

Alternatif penggantian untuk MCP6284-E/P — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

MCP6284-E/PCH

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-DIP (0.300, 7.62mm)
Same MCP6284 family electrical configuration and 14-DIP footprint; ordering code differs in the packaged form, with no identified change to the 5 MHz gain-bandwidth product or 2.5 V/µs slew rate.

📋 Alternatif referensi (tidak dalam katalog)

MCP6284-E/P Rating Maksimal & Karakteristik Listrik

Product Type Quad general-purpose operational amplifier
Number of Amplifiers 4 circuits
Gain-Bandwidth Product 5 MHz
Slew Rate 2.5 V/µs
Phase Margin 65°
Supply Voltage Range 2.2 V to 5.5 V
Arus Memerintah 450 µA typical per amplifier
Input Swing Rail-to-rail
Output Swing Rail-to-rail
Amplifier Type General-purpose
Paket 14-pin DIP, 0.300 inch (7.62 mm)
Tipe Mounting Through-hole
Packaging Tube
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Konfigurasi Pin MCP6284-E/P

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Pin produk 1 OUTA — Output of amplifier A
Pin produk 2 -INA — Inverting input of amplifier A
Pin produk 3 +INA — Non-inverting input of amplifier A
Pin produk 4 V- — Negative supply connection
Pin produk 5 +INB — Non-inverting input of amplifier B
Pin produk 6 -INB — Inverting input of amplifier B
Pin produk 7 OUTB — Output of amplifier B
Pin produk 8 OUTC — Output of amplifier C
Pin produk 9 -INC — Inverting input of amplifier C
Pin produk 10 +INC — Non-inverting input of amplifier C
Pin produk 11 V+ — Positive supply connection
Pin produk 12 +IND — Non-inverting input of amplifier D
Pin produk 13 -IND — Inverting input of amplifier D
Pin produk 14 OUTD — Output of amplifier D

Aplikasi Umum

MCP6284-E/P cocok untuk 6 aplikasis: Sensor Signal Conditioning, Active Filter Design, Audio and Communication Buffers, Data Acquisition Front End, Industrial Control and Instrumentation, Prototype and Educational Electronics.

🧩

Sensor Signal Conditioning

The MCP6284-E/P is well suited to conditioning outputs from low-voltage sensors because its rail-to-rail input and output swing preserves usable signal range in 2.2 V to 5.5 V systems. Use one amplifier as a voltage follower and the remaining channels for gain or filtering stages. Its 5 MHz gain-bandwidth product supports moderate-bandwidth signals, while 2.5 V/µs slew rate handles required output transitions. Check sensor source impedance and bias current before choosing the gain topology, and confirm that the input common-mode range covers the complete sensor waveform.

📡

Active Filter Design

The MCP6284-E/P can implement first- and second-order active filters in audio, measurement, and control circuits. Its 5 MHz gain-bandwidth product gives designers bandwidth above typical low-frequency filter cutoffs, and the 65° phase margin supports commonly used feedback configurations. The 14-pin DIP package simplifies through-hole prototype construction and allows individual amplifier sections to be evaluated. Component tolerances, gain-bandwidth variation, capacitive loading, and output-swing headroom should be checked while calculating the filter response.

🌐

Audio and Communication Buffers

The MCP6284-E/P provides four buffered channels for low-level audio, communications, and instrumentation interfaces. Rail-to-rail input and output capability is valuable when signals approach either supply rail, and the 450 µA typical quiescent current per amplifier supports low-power operation. The 2.5 V/µs slew rate can improve large-signal response compared with very slow micropower amplifiers. Designers should still evaluate distortion, noise, output load, stability into capacitive loads, and the bandwidth of the surrounding signal path.

🖥️

Data Acquisition Front End

The MCP6284-E/P can form the input conditioning section of a low-speed or moderate-speed data-acquisition system. Four independent channels allow instrumentation, differential conversion, anti-alias filtering, or reference buffering to be implemented without using four separate packages. The 5 MHz gain-bandwidth product accommodates many precision-measurement front ends, while rail-to-rail operation helps with restricted sensor ranges. Validate input capacitance, settling behavior, offset, noise, and common-mode performance for the selected gain and sampling rate.

🏭

Industrial Control and Instrumentation

The MCP6284-E/P is appropriate for general-purpose industrial control and instrumentation circuits operating from 3.3 V or 5 V rails. It can amplify control signals, buffer sensor outputs, and drive analog stages within the limits of the selected gain and load. The through-hole DIP package is useful for industrial controller assemblies that use socketed or manually serviced analog boards. Because the family is a general-purpose amplifier rather than an automotive-qualified device, verify environmental, lifecycle, and compliance requirements for the target installation.

🔧

Prototype and Educational Electronics

The MCP6284-E/P is particularly convenient for prototypes, laboratory instruments, and educational electronics because four amplifiers are available in an inspectable 14-pin DIP package. The package is easy to insert into a breadboard or socket and allows straightforward access to power, input, and output pins. Its 5 MHz bandwidth is more than adequate for many basic amplifier, comparator-style, oscillator, and filter experiments. Begin with a unity-gain configuration, verify supply decoupling, and avoid exceeding the input and output limits documented by Microchip.

What is the MCP6284-E/P?
The MCP6284-E/P is a Microchip Technology quad general-purpose operational amplifier with rail-to-rail input and output capability. According to the Microchip MCP6284 product page, the family provides a 5 MHz gain-bandwidth product, 65° phase margin, and operation from a single 2.2 V to 5.5 V supply. The MCP6284-E/P is the 14-pin through-hole DIP configuration with tube packaging.
What is the operating voltage of MCP6284-E/P?
The MCP6284-E/P operates from a single supply of 2.2 V to 5.5 V. This range makes it suitable for 3.3 V and 5 V systems, as stated in the Microchip MCP6284 family description. The rail-to-rail input and output architecture helps preserve usable signal range when the supply voltage is limited, although the exact input and output limits must be checked in the manufacturer datasheet for the operating condition.
What are the key specifications of MCP6284-E/P that engineers should know?
The MCP6284-E/P combines four amplifiers, a 5 MHz gain-bandwidth product, a 2.5 V/µs slew rate, and a 65° phase margin. According to the Microchip product page, the device supports a single supply from 2.2 V to 5.5 V and typically consumes 450 µA per amplifier. Rail-to-rail input and output swing are particularly useful in low-voltage signal-conditioning circuits where headroom is limited.
Where can I download the MCP6284-E/P datasheet PDF?
The official Microchip MCP6284 product page is the preferred starting point for the MCP6284-E/P datasheet and product documentation. It links to the family-level technical information and ordering resources for the MCP6284-E/P. Use the manufacturer datasheet to confirm pin functions, recommended operating conditions, electrical limits, packaging details, and test conditions before releasing a production design.
Where can I find the MCP6284-E/P pinout?
The MCP6284-E/P uses a 14-pin DIP pinout containing four independent operational amplifiers. The standard quad-op-amp arrangement places the four output pins at pins 1, 7, 8, and 14, with the corresponding inverting inputs at pins 2, 6, 9, and 13, non-inverting inputs at pins 3, 5, 10, and 12, negative supply at pin 4, and positive supply at pin 11. Verify the assignment against the manufacturer datasheet during schematic capture.
What is the slew rate of MCP6284-E/P?
The MCP6284-E/P has a typical slew rate of 2.5 V/µs. The Microchip MCP6284 family specification identifies this value for the general-purpose amplifier family. Slew rate determines how quickly the output can move between voltage levels, so the specification is important for waveform fidelity, small-signal bandwidth behavior, and designs using the amplifier as a buffer.
Can MCP6284-E/P be used at 3.3 V?
Yes, the MCP6284-E/P is suitable for 3.3 V operation because its specified single-supply range extends from 2.2 V to 5.5 V. Rail-to-rail input and output capability is helpful in constrained 3.3 V rails, although the designer should still check the common-mode range, output swing, and load requirements under the actual signal and bias conditions.
Is MCP6284-E/P suitable for sensor signal conditioning?
The MCP6284-E/P is suitable for many sensor signal-conditioning stages because it provides four amplifiers, rail-to-rail input and output swing, a 5 MHz gain-bandwidth product, and a 2.5 V/µs slew rate. Use an amplifier configuration appropriate to the sensor output, such as non-inverting gain, inverting gain, or an instrumentation arrangement, and verify offset, bias-current, noise, and common-mode requirements for the sensor.
What can replace MCP6284-E/P?
A replacement for MCP6284-E/P must be a quad operational amplifier in the same 14-pin DIP footprint with compatible rail-to-rail input and output behavior, supply range, and approximately equivalent bandwidth. The cross-reference search results do not identify a confirmed pin-compatible substitute for this exact part. Use Microchip's cross-reference search and the manufacturer datasheets to validate any candidate before using it as a drop-in replacement.
What is the best drop-in replacement for MCP6284-E/P?
No confirmed drop-in replacement for MCP6284-E/P is identified in the available cross-reference results. The MCP6284-E/ST appears in a comparison result, but its SOIC package does not match the 14-pin DIP package of MCP6284-E/P, so it is not a drop-in substitute. A valid replacement must preserve the 14-pin DIP footprint and confirm equivalent electrical and pin behavior.
Is MCP6284-E/P the same as MCP6284-E/ST?
No. MCP6284-E/P and MCP6284-E/ST use different packages: MCP6284-E/P is a 14-pin through-hole DIP, while MCP6284-E/ST is an SOIC package. They may share the MCP6284 family architecture, but changing package type requires a different PCB footprint and different assembly method. The manufacturer datasheet and package drawings should be checked before any substitution.
MCP6284-E/P vs MCP6284-E/ST - which is better for a new design?
MCP6284-E/P is the better choice when through-hole assembly, prototyping, or a 14-pin DIP footprint is required. MCP6284-E/ST is more appropriate for compact surface-mount layouts because it uses an SOIC package. The electrical family characteristics are similar, but package size, assembly method, and PCB land pattern determine which option fits the mechanical design.
When should I choose MCP6284-E/P over a surface-mount alternative?
Choose MCP6284-E/P when through-hole assembly, socketability, easier inspection, or a straightforward prototype layout is more important than minimizing board area. Its 14-pin DIP package is larger than an SOIC alternative and is less suitable for very compact production products. For a new design with a fully automated surface-mount process, compare the available SOIC options only after confirming the same pin and electrical requirements.
Where to buy MCP6284-E/P online?
Use the Request a Quote form on this page to request current MCP6284-E/P availability, pricing, and lead time from XAIPART. The MCP6284-E/P is identified as an in-stock component in the available sourcing results, but quantity and delivery commitments should be confirmed through the quote process. The manufacturer product page remains the authoritative source for product status and documentation.
What is the price and lead time of MCP6284-E/P?
Current MCP6284-E/P price and lead time should be obtained through the Request a Quote form on this page. The available listing information shows a product price indication, but it does not provide a complete quantity-break table for the exact MPN, so no static customer price is published here. Request the quantity required, tube quantity, and delivery schedule when requesting a quotation.
Is MCP6284-E/P RoHS compliant?
The RoHS status of MCP6284-E/P is not stated in the cited product information, so it should be treated as unknown until confirmed in the manufacturer's current material-declaration or product documentation. The same caution applies to REACH, lead-free, halogen-free, and conflict-minerals status. These declarations can differ by package, revision, and sales region, so use the current Microchip documentation for compliance decisions.

Data referensi engineering untuk MCP6284-E/P — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose MCP6284-E/P when the design needs four general-purpose amplifiers, rail-to-rail input and output operation, a 5 MHz gain-bandwidth product, and a through-hole 14-pin DIP package. It is a practical choice for prototypes, educational circuits, socketed analog boards, and industrial products assembled with through-hole components. The MCP6284-E/ST is preferable when compact surface-mount construction is more important, but its SOIC footprint is not interchangeable with the DIP version. Before selecting any substitute, confirm the package, pin assignment, supply range, input common-mode limits, output swing, bandwidth, quiescent current, and stability characteristics. The available cross-reference search results do not establish a confirmed drop-in replacement for the exact MCP6284-E/P, so a replacement should not be assumed from family name or amplifier count alone.

Catatan Desain

Place a supply bypass capacitor close to pins 11 and 4, and connect the ground return directly to the amplifier supply reference. The MCP6284-E/P supports a single supply from 2.2 V to 5.5 V, but the usable signal range still depends on the common-mode and output-swing limits for the selected conditions. Use separate, short supply paths for each amplifier section when driving multiple loads.

Keep input and feedback traces short and route them away from noisy switching nodes and high-current return paths. The 14-pin DIP footprint simplifies through-hole assembly, but lead inductance can become important in fast feedback loops. Place input and output decoupling components close to their associated pins, and avoid long parallel runs between the amplifier and sensitive source components.

Do not assume that rail-to-rail input and output means zero headroom. Check the manufacturer limits for input common-mode range, output swing, output current, and capacitive loading at the intended supply voltage and temperature. Also verify that a chosen replacement has the same 14-pin DIP footprint and equivalent amplifier pin functions; changing to an SOIC package requires a PCB change.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The available product and distributor information does not state the compliance declarations for this exact orderable part. Confirm current RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation with Microchip.

Pencarian Terkait

mcp6284 datasheet MCP6284-E/P datasheet MCP6284-E/P specifications MCP6284-E/P pinout MCP6284-E/P 14-DIP MCP6284-E/P equivalent MCP6284-E/P replacement MCP6284-E/P vs MCP6284-E/ST Microchip MCP6284-E/P MCP6284-E/P price MCP6284-E/P stock MCP6284 rail-to-rail op amp

Komponen dan Istilah Terkait

Microchip Technology MCP6284-E/P MCP6284 MCP6284-E/ST quad operational amplifier general-purpose op amp analog IC signal-conditioning IC rail-to-rail input rail-to-rail output gain-bandwidth product GBWP slew rate phase margin single-supply operation quiescent current 14-pin DIP through-hole package Microchip cross-reference search RoHS REACH
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ