Microchip Technology

MCP661-E/SN - 60MHz RRO Op Amp | Microchip Technology

MPN: MCP661-E/SN ✓ Aktif
2.5 V minimum Vdss 90 mA typical Id 8-SOIC, 0.154 inch body width, 3.90 mm width Package
MOQ: 1 |

MCP661-E/SN Ringkasan

Microchip Technology MCP661-E/SN is a single-amplifier operational amplifier with a 60 MHz typical gain-bandwidth product, 32 V/µs typical slew rate, and rail-to-rail output capability, housed in an 8-pin SOIC package. Its supply-voltage range begins at 2.5 V, making it suitable for compact, low-voltage signal-conditioning systems.

An operational amplifier, commonly called an op amp, is an analog integrated circuit that provides high open-loop gain and is normally used with external feedback to amplify or filter signals. The MCP661 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its 60 MHz bandwidth supports faster closed-loop response than lower-bandwidth general-purpose amplifiers, while its rail-to-rail output expands usable output-voltage range in low-voltage systems.

Key electrical characteristics include a 90 mA typical output short-circuit current, 79 dB typical common-mode rejection ratio, 6.8 nV/√Hz typical input-voltage noise density at 1 MHz, and 32 V/µs typical slew rate. These specifications make the device useful for filtering, signal conditioning, communications, instrumentation, and general-purpose analog signal processing where dynamic range and response speed matter.

The MCP661-E/SN uses a single-amplifier architecture and provides 8-SOIC packaging for surface-mount assembly. The -E version supports operation from -40°C to +125°C, while the /SN identifies the standard SOIC package and shipping format. An output offset-voltage pin and rail-to-rail output stage provide additional implementation flexibility in precision analog circuits.

Typical applications include active filters, sensor signal conditioning, communications-interface signal paths, audio preamplification, data-acquisition channels, and general-purpose amplification. Designers operating near the positive supply rail should account for output-headroom and short-circuit limits rather than assuming unlimited output swing.

For stable closed-loop operation, follow the manufacturer’s recommended compensation and resistor-selection guidance. Keep feedback traces short, place the input network close to the device, and provide adequate supply bypassing. A non-inverting gain stage should include a suitable noise-gain resistor to avoid peaking or oscillation.

This product page combines electrical characteristics, package details, replacement guidance, application-specific design considerations, and practical comparisons to help engineers evaluate the MCP661-E/SN before integrating it into an 8-SOIC analog design.

Alternatif penggantian untuk MCP661-E/SN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MCP661-E/SN (sama faktor bentuk dan footprint) — berbeda di dalam Package, Amplifier Type, Gain-Bandwidth Product, Input Bias Current, Operating Temperature Range.

Microchip Technology
Package: 8-pin SOIC
Gain-Bandwidth Product: 50 MHz
Microchip Technology
Package: 8-pin SOIC, 3.90 mm
Amplifier Type: Operational amplifier
Input Bias Current: 0.0050 uA typical

MCP660-E/SN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-SOIC
Same MCP66x family and 8-SOIC pin arrangement; bandwidth differs from the target's 60 MHz typical value and must be checked for filter gain error.

📋 Alternatif referensi (tidak dalam katalog)

MCP661-I/SN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-SOIC
Same MCP661 electrical family and 8-SOIC footprint; temperature-grade suffix differs, so the higher-grade operating limits must be compared with the -E/SN requirement.

📋 Alternatif referensi (tidak dalam katalog)

MCP662-E/SN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 8-SOIC
Operational amplifier · 2 circuits · 60 MHz typical · 32 V/us typical · Rail-to-rail output · 2.5 V to 5.5 V · 0.0050 uA typical · 79 dB typical

Kontak untuk harga

Lihat Datasheet →

MCP663-E/SN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-SOIC
Same MCP66x family and 8-SOIC package; higher speed ratings differ from the 60 MHz and 32 V/µs typical performance of MCP661-E/SN.

📋 Alternatif referensi (tidak dalam katalog)

MCP664-E/SN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-SOIC
Same MCP66x family and 8-SOIC footprint; gain-bandwidth and slew-rate values differ from the target and must be checked against the intended closed-loop gain.

📋 Alternatif referensi (tidak dalam katalog)

OPA348AID

✅ Drop-In
📦 8-SOIC
Same 8-SOIC format, but the gain-bandwidth rating differs from the target's 60 MHz typical value; check supply range, rail-to-rail behavior, noise, and slew rate before substitution.

📋 Alternatif referensi (tidak dalam katalog)

MCP661-E/SN Rating Maksimal & Karakteristik Listrik

Amplifier Type Single operational amplifier
Gain-Bandwidth Product 60 MHz typical
Slew Rate 32 V/µs typical
Supply Voltage Range 2.5 V minimum
Output Architecture Rail-to-rail output
Short-Circuit Output Current 90 mA typical
Input Voltage Noise Density 6.8 nV/√Hz typical at 1 MHz
Common-Mode Rejection Ratio 79 dB typical
Input Bias Current 0.0050 µA typical
Rentang Suhu Kerja -40°C to +125°C
Paket 8-SOIC, 0.154 inch body width, 3.90 mm width
Tipe Mounting Surface mount
Circuit Count 1 circuit
Output Offset Adjustment Dedicated OS pin

Konfigurasi Pin MCP661-E/SN

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin produk 1 NC — Not connected
Pin produk 2 -IN — Inverting input
Pin produk 3 +IN — Non-inverting input
Pin produk 4 V- — Negative supply voltage
Pin produk 5 OS — Output offset voltage adjustment
Pin produk 6 OUT — Analog output
Pin produk 7 V+ — Positive supply voltage
Pin produk 8 NC — Not connected

Aplikasi Umum

MCP661-E/SN cocok untuk 6 aplikasis: Active Audio and Communications Filters, Sensor Signal Conditioning, Data Acquisition Front Ends, Audio Preamplification, Industrial Control and Instrumentation, Portable and Low-Voltage Equipment.

🌐

Active Audio and Communications Filters

MCP661-E/SN fits active filtering and communications signal-conditioning paths that require more bandwidth than a general-purpose precision amplifier. Its 60 MHz typical gain-bandwidth product supports closed-loop operation across a wider frequency range, while the 32 V/µs typical slew rate reduces distortion when signals transition rapidly. The single-amplifier 8-SOIC device also provides 90 mA typical short-circuit output current for driving the next stage. Configure the closed-loop gain with the recommended compensation values, place feedback components close to the pins, and verify output swing at the selected supply voltage. Rail-to-rail output operation is useful when the signal approaches the positive rail, although load-current and distortion limits still require review.

🧩

Sensor Signal Conditioning

MCP661-E/SN can amplify and condition signals from sensors whose output bandwidth is above the range of many precision amplifiers. Its 79 dB typical common-mode rejection ratio helps reduce common-mode interference, while 6.8 nV/√Hz typical input-noise density at 1 MHz supports low-noise signal-chain work. The 2.5 V minimum supply voltage suits compact low-voltage systems, and the extended -40°C to +125°C range covers industrial environments. Use a sensor-specific gain stage that includes suitable input biasing, check the input common-mode range at worst-case supply and temperature, and keep high-impedance sensor traces away from switching nodes. The OS pin should be connected according to the manufacturer application guidance for the intended offset behavior.

🖥️

Data Acquisition Front Ends

MCP661-E/SN is suitable for intermediate data-acquisition stages that require a wider bandwidth than conventional precision op amps. A 60 MHz typical gain-bandwidth product preserves signal amplitude and phase margin in higher-bandwidth conditioning paths, and the 32 V/µs typical slew rate supports large full-scale output transitions. Its 8-SOIC package simplifies assembly and provides a common footprint for MCP66x family evaluation. Designers should calculate noise gain, select compensation capacitors that stabilize the intended gain, and verify that the analog input remains within the common-mode range. Place the amplifier near the sensor or converter interface, bypass the supply pins locally, and include output clamping where a downstream converter may present an unexpected fault condition.

🎧

Audio Preamplification

MCP661-E/SN can serve as a low-voltage audio preamplifier when a wider bandwidth and faster slew response are useful. Its 60 MHz typical gain-bandwidth product comfortably covers many audio-band signal paths, and the 32 V/µs typical slew rate reduces large-signal slew distortion. Rail-to-rail output capability increases usable signal range in 2.5 V and higher supply systems, while the 90 mA typical short-circuit current provides drive for the following stage. Keep input and feedback resistors close to the device to minimize parasitic capacitance, use low-noise capacitors for frequency compensation, and avoid loading the OS pin with long traces. Confirm output swing, distortion, and stability across the audio band before production use.

🏭

Industrial Control and Instrumentation

MCP661-E/SN is appropriate for industrial control and instrumentation modules that combine low-voltage operation with an extended -40°C to +125°C temperature range. The 79 dB typical common-mode rejection ratio is useful when conditioning small signals riding on larger industrial common-mode voltages, while the 60 MHz typical gain-bandwidth product supports faster feedback loops and measurement channels. The rail-to-rail output stage helps use available supply headroom in compact systems. Confirm the actual input common-mode range under temperature and supply extremes, protect inputs against industrial transients, and maintain short ground returns. A local supply bypass capacitor and grounded return plane improve stability and reduce supply-coupled noise in multi-channel instrumentation designs.

📱

Portable and Low-Voltage Equipment

MCP661-E/SN suits portable and low-voltage equipment requiring compact analog amplification without a high minimum supply requirement. Its 2.5 V minimum supply voltage supports low-energy systems, and the single-amplifier 8-SOIC package limits board area compared with multi-amplifier solutions. The 60 MHz typical gain-bandwidth product allows the device to handle more than only DC or low-frequency sensor signals, while the 32 V/µs typical slew rate preserves waveform shape in higher-frequency channels. Account for battery-voltage variation when checking common-mode range and output swing. Use low-leakage biasing resistors, keep sensitive input routes compact, and select bypass capacitance appropriate for the required supply impedance without placing excessive inrush demand on the source.

Ringkasan Produk Direkomendasikan

MCP660-E/SN MCP66x family active-filter alternative Digunakan di dalam: Active Audio and Communications Filters, Audio Preamplification MCP662-E/SN Microchip Technology Digunakan di dalam: Active Audio and Communications Filters, Data Acquisition Front Ends, Portable and Low-Voltage Equipment OPA348AID 8-SOIC high-speed op-amp comparison Digunakan di dalam: Active Audio and Communications Filters, Audio Preamplification MCP661-I/SN Temperature-grade family option Digunakan di dalam: Sensor Signal Conditioning, Industrial Control and Instrumentation, Portable and Low-Voltage Equipment MCP664-E/SN MCP66x family signal-conditioning option Digunakan di dalam: Sensor Signal Conditioning, Industrial Control and Instrumentation TS974IDT STMicroelectronics Digunakan di dalam: Sensor Signal Conditioning MCP663-E/SN Higher-speed MCP66x family option Digunakan di dalam: Data Acquisition Front Ends TS932IDT STMicroelectronics Digunakan di dalam: Data Acquisition Front Ends AK4495EQ AKM (Asahi Kasei Microdevices) Digunakan di dalam: Audio Preamplification TS924IPT STMicroelectronics Digunakan di dalam: Industrial Control and Instrumentation AK5522VN AKM (Asahi Kasei Microdevices) Digunakan di dalam: Portable and Low-Voltage Equipment
Where can I buy MCP661-E/SN online?
Use the Request a Quote form on this page to inquire about MCP661-E/SN availability, order quantities, and shipment scheduling. The part is an 8-SOIC operational amplifier with a 60 MHz typical gain-bandwidth product, so confirm the SOIC package, extended-temperature version, and the -E/SN ordering suffix before submitting a request. XAIPART can provide a quotation against the exact manufacturer part number rather than a mechanically similar package or grade.
What is the price of MCP661-E/SN?
Submit an MCP661-E/SN request through the Request a Quote form on this page for current commercial terms. The device is specified as a 60 MHz rail-to-rail-output operational amplifier in an 8-SOIC package with operation from -40°C to +125°C. A quotation should be tied to the exact MCP661-E/SN suffix because package, temperature grade, and reel or other ordering details can affect sourcing conditions.
What is the lead time for MCP661-E/SN?
Request the current MCP661-E/SN lead time with the Request a Quote form on this page. Lead time can change with manufacturer inventory, production scheduling, package configuration, and order volume, so it should be confirmed for each purchase rather than treated as a fixed catalog value. Include your required quantity, delivery location, target date, and preferred 8-SOIC shipping format in the request.
Is MCP661-E/SN in stock?
Check current MCP661-E/SN inventory and supply status through the Request a Quote form on this page. The component is listed with a 60 MHz typical gain-bandwidth product, a 32 V/µs typical slew rate, and an extended -40°C to +125°C operating range. A stock response should cover the exact -E/SN ordering code and your required quantity so that no tape-and-reel or other suffix is substituted unintentionally.
What is the difference between MCP661-E/SN and OPA348AID?
The MCP661-E/SN provides a 60 MHz typical gain-bandwidth product, while the OPA348AID is identified in a cross-reference comparison as a lower-bandwidth operational-amplifier alternative. MCP661-E/SN also offers a 32 V/µs typical slew rate, 90 mA typical short-circuit output current, and an extended temperature range of -40°C to +125°C. Both use an 8-pin SOIC format, but signal integrity, supply compatibility, and AC performance should be checked before substitution.
MCP661-E/SN vs OPA348AID: which is better for high-speed filtering?
Choose MCP661-E/SN when closed-loop bandwidth and slew rate are the priorities, because its 60 MHz typical gain-bandwidth product and 32 V/µs typical slew rate are explicitly specified. The OPA348AID appears in the available cross-reference comparison for MCP661-E/SN, but its detailed operating limits are not stated here. Confirm rail-to-rail behavior, supply range, noise, output-current capability, and stability with the manufacturer documentation before deciding.
When should I choose MCP661-E/SN over MCP662-E/SN?
Choose MCP661-E/SN when a 60 MHz typical gain-bandwidth product, 32 V/µs typical slew rate, and 90 mA typical short-circuit current align with the circuit. MCP662-E/SN belongs to the same Microchip MCP66x family and can be considered when its exact bandwidth, offset-pin behavior, and operating characteristics better satisfy the design. Review the manufacturer pin description and electrical tables for the selected variant before finalizing the 8-SOIC layout.
Is MCP661-E/SN suitable for low-voltage sensor signal conditioning?
Yes, MCP661-E/SN is suitable for many low-voltage sensor signal-conditioning circuits because its minimum supply voltage is 2.5 V and its 79 dB typical common-mode rejection ratio helps reject common-mode input noise. Its 60 MHz typical gain-bandwidth product also supports higher closed-loop bandwidth than low-frequency precision amplifiers. Input common-mode range, output swing, sensor source impedance, and noise-gain compensation must still be checked against the actual operating point.
What can replace MCP661-E/SN?
The closest documented starting point is the Microchip MCP66x family, including MCP660-E/SN, MCP662-E/SN, MCP663-E/SN, and MCP664-E/SN, subject to pin-level and AC-parameter review. OPA348AID is also listed in a direct comparison with MCP661-E/SN. A valid replacement must preserve the 8-SOIC footprint, supply range, input and output pin functions, gain-bandwidth product, slew rate, stability, and temperature requirements rather than relying on package shape alone.
Where can I download the MCP661-E/SN datasheet PDF?
Open the Microchip MCP661 product page linked on this page to access the manufacturer datasheet and related documentation. The key PDF specifications identify MCP661-E/SN as a 60 MHz, 32 V/µs, rail-to-rail-output operational amplifier. Use the manufacturer’s pin-description table when assigning PCB nets and the electrical-characteristics tables for design limits; distributor-hosted copies should be treated as secondary access points to the same technical document.
Where can I find the MCP661-E/SN pinout?
The MCP661-E/SN pinout is shown by the Microchip manufacturer datasheet and the package diagram on this page. The 8-SOIC device uses offset-adjusted inputs, supply pins, an OS pin, and an output, with the unused positions identified as NC in the pin table. Preserve the standard counter-clockwise SOIC numbering when laying out the PCB and do not connect an NC position unless a later device revision explicitly assigns a function.
What are the key specifications of MCP661-E/SN that engineers should know?
The MCP661-E/SN is a single 60 MHz operational amplifier with 32 V/µs typical slew rate, 2.5 V minimum supply voltage, 90 mA typical short-circuit output current, and rail-to-rail output. Its typical input-noise density is 6.8 nV/√Hz at 1 MHz, typical common-mode rejection is 79 dB, and operating temperature spans -40°C to +125°C. It is packaged in an 8-SOIC surface-mount format.
Does MCP661-E/SN need a heat sink at high output current?
Heat-sink requirements depend on supply voltage, output voltage, load current, ambient temperature, and board copper, not only on the nominal 90 mA typical short-circuit current. Because the short-circuit rating is not a continuous recommended load, calculate dissipation from the actual operating condition and compare it with the package thermal information in the manufacturer datasheet. Keep traces short and use adequate copper area while preserving the required output current and temperature limits.
How should MCP661-E/SN feedback and bypass components be laid out?
Place input, feedback, and compensation components close to the 8-SOIC pins, and connect the bypass capacitor directly to the supply and ground pins with very short traces. Use the resistor and capacitor values recommended for the selected closed-loop gain and noise gain in the manufacturer documentation. Avoid routing high-impedance input nodes beside digital or switching nodes, and keep the OS connection in the configuration shown by the application guidance.
Is the OPA348AID the best cross-brand equivalent for MCP661-E/SN?
OPA348AID is the best explicitly compared cross-brand candidate in the available MCP661-E/SN search results, but it should not be treated as automatically interchangeable. MCP661-E/SN has a 60 MHz typical gain-bandwidth product, 32 V/µs typical slew rate, 2.5 V minimum supply, and -40°C to +125°C operating range. Confirm that OPA348AID meets the required supply, rail-to-rail behavior, input offset, noise, stability, and temperature limits before using it.

Data referensi engineering untuk MCP661-E/SN — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose MCP661-E/SN when the design benefits from a 60 MHz typical gain-bandwidth product, 32 V/µs typical slew rate, rail-to-rail output, a 2.5 V minimum supply, and operation from -40°C to +125°C. MCP661-I/SN is the closest same-family choice when the required temperature grade differs; confirm the grade before schematic release. MCP660-E/SN, MCP662-E/SN, MCP663-E/SN, and MCP664-E/SN remain candidates within the MCP66x family when their individual bandwidth, slew-rate, and offset-pin characteristics better match the required response. OPA348AID is a cross-brand 8-SOIC candidate, but it should be selected only after confirming supply range, rail-to-rail operation, noise, stability, and temperature requirements. For every proposed replacement, verify the physical pin functions, closed-loop compensation, output-current demand, and PCB footprint rather than relying only on the SOIC package designation.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MCP660-E/SN MCP661-I/SN MCP662-E/SN MCP663-E/SN MCP664-E/SN OPA348AID
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Texas Instruments
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Amplifier Count 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Gain-Bandwidth Product 60 MHz typical Not stated 60 MHz typical Not stated Not stated Not stated Not stated
Slew Rate 32 V/µs typical Not stated 32 V/µs typical Not stated Not stated Not stated Not stated
Minimum Supply Voltage 2.5 V Not stated 2.5 V Not stated Not stated Not stated Not stated
Output Architecture Rail-to-rail output Not stated Rail-to-rail output Not stated Not stated Not stated Not stated
Input Noise Density 6.8 nV/√Hz typical at 1 MHz Not stated 6.8 nV/√Hz typical at 1 MHz Not stated Not stated Not stated Not stated
Operating Temperature -40°C to +125°C Not stated Temperature-grade limits differ; verify ordering code Not stated Not stated Not stated Not stated

Diferensiator Kunci

  • Higher specified gain-bandwidth product than the compared cross-brand candidate requires for equivalent bandwidth (vsOPA348AID)
  • Temperature-grade family option permits equivalent electrical selection with different temperature limits (vsMCP661-I/SN)
  • Extended-temperature operation supports industrial environment requirements (vsOPA348AID)

Catatan Desain

Place the input, feedback, compensation, and bypass components directly beside their associated MCP661-E/SN pins. Keep the V+ bypass path and ground return short to reduce supply impedance and loop area. Route the OS pin away from fast output and switching nodes, and preserve a continuous ground reference beneath the device. For high-impedance sensor inputs, minimize exposed trace length and keep parallel signal routes short to reduce capacitance that can disturb closed-loop stability.

Do not treat the 90 mA typical short-circuit current as the normal continuous output-current target. Evaluate output drive at the actual load, supply, output-voltage, and temperature conditions. Likewise, 2.5 V is the minimum stated supply and does not guarantee identical common-mode range or output swing at every supply voltage. Use the manufacturer input and output characteristic tables to verify operating margins, especially in battery-powered systems where the supply can fall below the nominal level.

Select feedback resistors and compensation capacitors for the intended closed-loop gain and noise gain using the manufacturer’s stability guidance. The 60 MHz typical gain-bandwidth product requires a layout that does not add excessive parasitic capacitance or long feedback loops. If the circuit drives a capacitive load, isolate the amplifier with a suitable resistor and validate the resulting stability and pulse response on the finished PCB rather than relying only on ideal simulation results.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance attributes are not stated in the manufacturer product-page excerpt or technical specifications used for this product.

Data disahkan pada: 2026-11-10 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

MCP661-E/SN datasheet MCP661-E/SN pinout MCP661-E/SN datasheet pdf MCP661-E/SN equivalent MCP661-E/SN replacement MCP661-E/SN cross reference MCP661-E/SN vs OPA348AID MCP661-E/SN price MCP661-E/SN stock Microchip MCP661-E/SN MCP661 60MHz op amp MCP661 8-SOIC footprint MCP661 rail-to-rail application MCP661-E/SN low voltage amplifier

Komponen dan Istilah Terkait

Microchip Technology MCP661-E/SN MCP661 MCP660-E/SN MCP661-I/SN MCP662-E/SN MCP663-E/SN MCP664-E/SN OPA348AID operational amplifier op amp analog integrated circuit rail-to-rail output gain-bandwidth product slew rate common-mode rejection ratio input-voltage noise density short-circuit output current 8-SOIC SOIC family surface-mount package signal conditioning active filter data acquisition
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ