MCP661-E/SN - 60MHz RRO Op Amp | Microchip Technology
Référence : MCP661-E/SN ✓ ActifMCP661-E/SN Présentation
An operational amplifier, commonly called an op amp, is an analog integrated circuit that provides high open-loop gain and is normally used with external feedback to amplify or filter signals. The MCP661 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its 60 MHz bandwidth supports faster closed-loop response than lower-bandwidth general-purpose amplifiers, while its rail-to-rail output expands usable output-voltage range in low-voltage systems.
Key electrical characteristics include a 90 mA typical output short-circuit current, 79 dB typical common-mode rejection ratio, 6.8 nV/√Hz typical input-voltage noise density at 1 MHz, and 32 V/µs typical slew rate. These specifications make the device useful for filtering, signal conditioning, communications, instrumentation, and general-purpose analog signal processing where dynamic range and response speed matter.
The MCP661-E/SN uses a single-amplifier architecture and provides 8-SOIC packaging for surface-mount assembly. The -E version supports operation from -40°C to +125°C, while the /SN identifies the standard SOIC package and shipping format. An output offset-voltage pin and rail-to-rail output stage provide additional implementation flexibility in precision analog circuits.
Typical applications include active filters, sensor signal conditioning, communications-interface signal paths, audio preamplification, data-acquisition channels, and general-purpose amplification. Designers operating near the positive supply rail should account for output-headroom and short-circuit limits rather than assuming unlimited output swing.
For stable closed-loop operation, follow the manufacturer’s recommended compensation and resistor-selection guidance. Keep feedback traces short, place the input network close to the device, and provide adequate supply bypassing. A non-inverting gain stage should include a suitable noise-gain resistor to avoid peaking or oscillation.
This product page combines electrical characteristics, package details, replacement guidance, application-specific design considerations, and practical comparisons to help engineers evaluate the MCP661-E/SN before integrating it into an 8-SOIC analog design.
Alternatives de remplacement direct pour MCP661-E/SN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MCP661-E/SN (même facteur de forme et même empreinte) — différant par Package, Amplifier Type, Gain-Bandwidth Product, Input Bias Current, Operating Temperature Range.
MCP660-E/SN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MCP661-I/SN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MCP662-E/SN
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →MCP663-E/SN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MCP664-E/SN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
OPA348AID
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCP661-E/SN Valeurs maximales et caractéristiques électriques
| Amplifier Type | Single operational amplifier |
| Gain-Bandwidth Product | 60 MHz typical |
| Slew Rate | 32 V/µs typical |
| Supply Voltage Range | 2.5 V minimum |
| Output Architecture | Rail-to-rail output |
| Short-Circuit Output Current | 90 mA typical |
| Input Voltage Noise Density | 6.8 nV/√Hz typical at 1 MHz |
| Common-Mode Rejection Ratio | 79 dB typical |
| Input Bias Current | 0.0050 µA typical |
| Plage de température de fonctionnement | -40°C to +125°C |
| Boîtier | 8-SOIC, 0.154 inch body width, 3.90 mm width |
| Type de montage | Surface mount |
| Circuit Count | 1 circuit |
| Output Offset Adjustment | Dedicated OS pin |
Configuration des broches de MCP661-E/SN
| Broche 1 | NC — Not connected |
| Broche 2 | -IN — Inverting input |
| Broche 3 | +IN — Non-inverting input |
| Broche 4 | V- — Negative supply voltage |
| Broche 5 | OS — Output offset voltage adjustment |
| Broche 6 | OUT — Analog output |
| Broche 7 | V+ — Positive supply voltage |
| Broche 8 | NC — Not connected |
Applications typiques
MCP661-E/SN convient pour 6 applications: Active Audio and Communications Filters, Sensor Signal Conditioning, Data Acquisition Front Ends, Audio Preamplification, Industrial Control and Instrumentation, Portable and Low-Voltage Equipment.
Active Audio and Communications Filters
MCP661-E/SN fits active filtering and communications signal-conditioning paths that require more bandwidth than a general-purpose precision amplifier. Its 60 MHz typical gain-bandwidth product supports closed-loop operation across a wider frequency range, while the 32 V/µs typical slew rate reduces distortion when signals transition rapidly. The single-amplifier 8-SOIC device also provides 90 mA typical short-circuit output current for driving the next stage. Configure the closed-loop gain with the recommended compensation values, place feedback components close to the pins, and verify output swing at the selected supply voltage. Rail-to-rail output operation is useful when the signal approaches the positive rail, although load-current and distortion limits still require review.
Recommandé
Sensor Signal Conditioning
MCP661-E/SN can amplify and condition signals from sensors whose output bandwidth is above the range of many precision amplifiers. Its 79 dB typical common-mode rejection ratio helps reduce common-mode interference, while 6.8 nV/√Hz typical input-noise density at 1 MHz supports low-noise signal-chain work. The 2.5 V minimum supply voltage suits compact low-voltage systems, and the extended -40°C to +125°C range covers industrial environments. Use a sensor-specific gain stage that includes suitable input biasing, check the input common-mode range at worst-case supply and temperature, and keep high-impedance sensor traces away from switching nodes. The OS pin should be connected according to the manufacturer application guidance for the intended offset behavior.
Recommandé
Data Acquisition Front Ends
MCP661-E/SN is suitable for intermediate data-acquisition stages that require a wider bandwidth than conventional precision op amps. A 60 MHz typical gain-bandwidth product preserves signal amplitude and phase margin in higher-bandwidth conditioning paths, and the 32 V/µs typical slew rate supports large full-scale output transitions. Its 8-SOIC package simplifies assembly and provides a common footprint for MCP66x family evaluation. Designers should calculate noise gain, select compensation capacitors that stabilize the intended gain, and verify that the analog input remains within the common-mode range. Place the amplifier near the sensor or converter interface, bypass the supply pins locally, and include output clamping where a downstream converter may present an unexpected fault condition.
Recommandé
Audio Preamplification
MCP661-E/SN can serve as a low-voltage audio preamplifier when a wider bandwidth and faster slew response are useful. Its 60 MHz typical gain-bandwidth product comfortably covers many audio-band signal paths, and the 32 V/µs typical slew rate reduces large-signal slew distortion. Rail-to-rail output capability increases usable signal range in 2.5 V and higher supply systems, while the 90 mA typical short-circuit current provides drive for the following stage. Keep input and feedback resistors close to the device to minimize parasitic capacitance, use low-noise capacitors for frequency compensation, and avoid loading the OS pin with long traces. Confirm output swing, distortion, and stability across the audio band before production use.
Recommandé
Industrial Control and Instrumentation
MCP661-E/SN is appropriate for industrial control and instrumentation modules that combine low-voltage operation with an extended -40°C to +125°C temperature range. The 79 dB typical common-mode rejection ratio is useful when conditioning small signals riding on larger industrial common-mode voltages, while the 60 MHz typical gain-bandwidth product supports faster feedback loops and measurement channels. The rail-to-rail output stage helps use available supply headroom in compact systems. Confirm the actual input common-mode range under temperature and supply extremes, protect inputs against industrial transients, and maintain short ground returns. A local supply bypass capacitor and grounded return plane improve stability and reduce supply-coupled noise in multi-channel instrumentation designs.
Recommandé
Portable and Low-Voltage Equipment
MCP661-E/SN suits portable and low-voltage equipment requiring compact analog amplification without a high minimum supply requirement. Its 2.5 V minimum supply voltage supports low-energy systems, and the single-amplifier 8-SOIC package limits board area compared with multi-amplifier solutions. The 60 MHz typical gain-bandwidth product allows the device to handle more than only DC or low-frequency sensor signals, while the 32 V/µs typical slew rate preserves waveform shape in higher-frequency channels. Account for battery-voltage variation when checking common-mode range and output swing. Use low-leakage biasing resistors, keep sensitive input routes compact, and select bypass capacitance appropriate for the required supply impedance without placing excessive inrush demand on the source.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MCP661-E/SN — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MCP660-E/SN | MCP661-I/SN | MCP662-E/SN | MCP663-E/SN | MCP664-E/SN | OPA348AID |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Texas Instruments |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Amplifier Count | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 60 MHz typical | Not stated | 60 MHz typical | Not stated | Not stated | Not stated | Not stated |
| Slew Rate | 32 V/µs typical | Not stated | 32 V/µs typical | Not stated | Not stated | Not stated | Not stated |
| Minimum Supply Voltage | 2.5 V | Not stated | 2.5 V | Not stated | Not stated | Not stated | Not stated |
| Output Architecture | Rail-to-rail output | Not stated | Rail-to-rail output | Not stated | Not stated | Not stated | Not stated |
| Input Noise Density | 6.8 nV/√Hz typical at 1 MHz | Not stated | 6.8 nV/√Hz typical at 1 MHz | Not stated | Not stated | Not stated | Not stated |
| Operating Temperature | -40°C to +125°C | Not stated | Temperature-grade limits differ; verify ordering code | Not stated | Not stated | Not stated | Not stated |
Principaux différenciateurs
- Higher specified gain-bandwidth product than the compared cross-brand candidate requires for equivalent bandwidth (vs OPA348AID)
- Temperature-grade family option permits equivalent electrical selection with different temperature limits (vs MCP661-I/SN)
- Extended-temperature operation supports industrial environment requirements (vs OPA348AID)
Notes de conception
Place the input, feedback, compensation, and bypass components directly beside their associated MCP661-E/SN pins. Keep the V+ bypass path and ground return short to reduce supply impedance and loop area. Route the OS pin away from fast output and switching nodes, and preserve a continuous ground reference beneath the device. For high-impedance sensor inputs, minimize exposed trace length and keep parallel signal routes short to reduce capacitance that can disturb closed-loop stability.
Do not treat the 90 mA typical short-circuit current as the normal continuous output-current target. Evaluate output drive at the actual load, supply, output-voltage, and temperature conditions. Likewise, 2.5 V is the minimum stated supply and does not guarantee identical common-mode range or output swing at every supply voltage. Use the manufacturer input and output characteristic tables to verify operating margins, especially in battery-powered systems where the supply can fall below the nominal level.
Select feedback resistors and compensation capacitors for the intended closed-loop gain and noise gain using the manufacturer’s stability guidance. The 60 MHz typical gain-bandwidth product requires a layout that does not add excessive parasitic capacitance or long feedback loops. If the circuit drives a capacitive load, isolate the amplifier with a suitable resistor and validate the resulting stability and pulse response on the finished PCB rather than relying only on ideal simulation results.
Informations de conformité
Compliance attributes are not stated in the manufacturer product-page excerpt or technical specifications used for this product.