MK10DN512VLK10 - Kinetis K10 512KB Flash 100MHz MCU | NXP | 80-LQFP
MPN: MK10DN512VLK10 ✓ AktifMK10DN512VLK10 Ringkasan
An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core implementing the Thumb-2 instruction set, an optional single-precision floating-point unit, DSP extensions, and a Nested Vectored Interrupt Controller (NVIC). Kinetis K-series MCUs belong to the wider NXP Kinetis portfolio, which itself is a sub-family of ARM Cortex-M based microcontrollers. They sit within the integrated circuit category of power management and embedded control devices. Compared with Cortex-M0/M0+ parts, the M4 adds DSP and FPU capability for motor control and signal processing; compared with Cortex-M7, it is lower-power and lower-cost while retaining sufficient performance for many industrial and consumer tasks.
Key features include 512 KB dual-bank flash with EEPROM capability, 128 KB SRAM, high-speed 16-bit ADC, comparators, DAC, op-amps on-chip, USB OTG (full-speed) with integrated PHY, multiple serial peripherals (UART, SPI, I2C, I2S), low-power timer, RTC, and a 4-channel DMA. The on-chip analog integration reduces BOM for sensor conditioning and closed-loop control. Hardware security and tamper features plus a wide operating temperature range (-40C to +105C) make the part suitable for industrial and white-goods designs.
The MK10DN512VLK10 uses a Cortex-M4 core with 3-stage pipeline, branch speculation, and configurable single-precision FPU. Memory is organized as 512 KB primary flash with flash access control and 128 KB system SRAM. Peripherals are interconnected via a crossbar switch with arbitration, allowing simultaneous DMA-driven transfers while the CPU executes application code.
Typical applications include industrial control and HMI, low-cost motor drives, building automation, smart metering, USB peripherals, consumer electronics and medical instruments. The wide temperature range also supports outdoor and ruggedized installations. When designing with this part, allocate sufficient decoupling (100 nF + bulk) near each VDD/VSS pair and follow the LQFP-80 land pattern recommendations; for USB-OTG designs add the required 90-ohm differential routing and proper PCB stackup for the DP/DM traces.
Alternatif penggantian untuk MK10DN512VLK10 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MK10DN512VLK10 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Core, Maximum CPU Frequency, Mounting Type, Core Architecture.
MK10DN512ZVLK10
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MK10DN512VLL10
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MK20DN512VLK10
✅ Drop-InKontak untuk harga
Lihat Datasheet →MK10DN256VLK10
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MK10DX256VLK10
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MKL04Z8VTG4
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MK10DN512VLK10 Rating Maksimal & Karakteristik Listrik
| Manufacturer | NXP Semiconductors |
| Series | Kinetis K10 |
| Core | ARM Cortex-M4 with FPU |
| Core Size | 32-Bit |
| Maximum CPU Clock | 100 MHz |
| Program Memory Size | 512 KB (512K x 8) Flash |
| RAM Size | 128 KB |
| EEPROM Capacity | On-chip emulated EEPROM |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Rentang Suhu Kerja | -40C to +105C |
| Paket | 80-LQFP (12 x 12 mm) |
| Tipe Mounting | Surface Mount |
| Package Type | LQFP-80 |
| USB | USB OTG Full-Speed with on-chip PHY |
| Connectivity | I2C, SPI, UART, I2S, USB OTG, CAN |
| Peripherals | DMA, PWM, WDT, RTC, ADC, DAC, Op-amps, Comparators |
| Data Converters | 16-bit ADC, 12-bit DAC |
| Level MSL | MSL 3 (168 hours) |
| Status RoHS | Compliant |
Konfigurasi Pin MK10DN512VLK10
| Pin produk 1 | PTE0 — Port E GPIO / peripheral |
| Pin produk 2 | PTE1 — Port E GPIO / peripheral |
| Pin produk 3 | PTE2 — Port E GPIO / peripheral |
| Pin produk 4 | PTE3 — Port E GPIO / peripheral |
| Pin produk 5 | PTE4 — Port E GPIO / peripheral |
| Pin produk 6 | PTE5 — Port E GPIO / peripheral |
| Pin produk 7 | PTE6 — Port E GPIO / peripheral |
| Pin produk 8 | VSS — Ground |
| Pin produk 9 | PTE7 — Port E GPIO / peripheral |
| Pin produk 10 | PTE8 — Port E GPIO / peripheral |
| Pin produk 11 | PTE9 — Port E GPIO / peripheral |
| Pin produk 12 | PTE10 — Port E GPIO / peripheral |
| Pin produk 13 | PTE11 — Port E GPIO / peripheral |
| Pin produk 14 | PTE12 — Port E GPIO / peripheral |
| Pin produk 15 | VDD — Core supply voltage |
| Pin produk 16 | VSS — Ground |
| Pin produk 17 | PTA0 — Port A GPIO / peripheral |
| Pin produk 18 | PTA1 — Port A GPIO / peripheral |
| Pin produk 19 | PTA2 — Port A GPIO / peripheral |
| Pin produk 20 | PTA3 — Port A GPIO / peripheral |
| Pin produk 21 | PTA4 — Port A GPIO / peripheral |
| Pin produk 22 | PTA5 — Port A GPIO / peripheral |
| Pin produk 23 | PTA6 — Port A GPIO / peripheral |
| Pin produk 24 | PTA7 — Port A GPIO / peripheral |
| Pin produk 25 | PTA8 — Port A GPIO / peripheral |
| Pin produk 26 | PTA9 — Port A GPIO / peripheral |
| Pin produk 27 | PTA10 — Port A GPIO / peripheral |
| Pin produk 28 | PTA11 — Port A GPIO / peripheral |
| Pin produk 29 | PTA12 — Port A GPIO / peripheral |
| Pin produk 30 | PTA13 — Port A GPIO / peripheral |
| Pin produk 31 | PTA14 — Port A GPIO / peripheral |
| Pin produk 32 | PTA15 — Port A GPIO / peripheral |
| Pin produk 33 | PTA16 — Port A GPIO / peripheral |
| Pin produk 34 | PTA17 — Port A GPIO / peripheral |
| Pin produk 35 | PTB0 — Port B GPIO / peripheral |
| Pin produk 36 | PTB1 — Port B GPIO / peripheral |
| Pin produk 37 | PTB2 — Port B GPIO / peripheral |
| Pin produk 38 | PTB3 — Port B GPIO / peripheral |
| Pin produk 39 | PTB4 — Port B GPIO / peripheral |
| Pin produk 40 | PTB5 — Port B GPIO / peripheral |
| Pin produk 41 | PTB6 — Port B GPIO / peripheral |
| Pin produk 42 | PTB7 — Port B GPIO / peripheral |
| Pin produk 43 | PTB8 — Port B GPIO / peripheral |
| Pin produk 44 | PTB9 — Port B GPIO / peripheral |
| Pin produk 45 | PTB10 — Port B GPIO / peripheral |
| Pin produk 46 | PTB11 — Port B GPIO / peripheral |
| Pin produk 47 | PTB12 — Port B GPIO / peripheral |
| Pin produk 48 | PTB13 — Port B GPIO / peripheral |
| Pin produk 49 | PTB14 — Port B GPIO / peripheral |
| Pin produk 50 | PTB15 — Port B GPIO / peripheral |
| Pin produk 51 | PTB16 — Port B GPIO / peripheral |
| Pin produk 52 | PTB17 — Port B GPIO / peripheral |
| Pin produk 53 | PTC0 — Port C GPIO / peripheral |
| Pin produk 54 | PTC1 — Port C GPIO / peripheral |
| Pin produk 55 | PTC2 — Port C GPIO / peripheral |
| Pin produk 56 | PTC3 — Port C GPIO / peripheral |
| Pin produk 57 | PTC4 — Port C GPIO / peripheral |
| Pin produk 58 | PTC5 — Port C GPIO / peripheral |
| Pin produk 59 | PTC6 — Port C GPIO / peripheral |
| Pin produk 60 | PTC7 — Port C GPIO / peripheral |
| Pin produk 61 | PTC8 — Port C GPIO / peripheral |
| Pin produk 62 | PTC9 — Port C GPIO / peripheral |
| Pin produk 63 | PTC10 — Port C GPIO / peripheral |
| Pin produk 64 | PTC11 — Port C GPIO / peripheral |
| Pin produk 65 | PTC12 — Port C GPIO / peripheral |
| Pin produk 66 | PTC13 — Port C GPIO / peripheral |
| Pin produk 67 | PTC14 — Port C GPIO / peripheral |
| Pin produk 68 | PTC15 — Port C GPIO / peripheral |
| Pin produk 69 | PTC16 — Port C GPIO / peripheral |
| Pin produk 70 | PTC17 — Port C GPIO / peripheral |
| Pin produk 71 | PTD0 — Port D GPIO / peripheral |
| Pin produk 72 | PTD1 — Port D GPIO / peripheral |
| Pin produk 73 | PTD2 — Port D GPIO / peripheral |
| Pin produk 74 | PTD3 — Port D GPIO / peripheral |
| Pin produk 75 | PTD4 — Port D GPIO / peripheral |
| Pin produk 76 | PTD5 — Port D GPIO / peripheral |
| Pin produk 77 | PTD6 — Port D GPIO / peripheral |
| Pin produk 78 | PTD7 — Port D GPIO / peripheral |
| Pin produk 79 | VSS — Ground |
| Pin produk 80 | VDD — Core supply voltage |
Aplikasi Umum
MK10DN512VLK10 cocok untuk 6 aplikasis: Industrial Motor Control and Drives, Building Automation and HVAC Controllers, USB Peripherals and HID Devices, Smart Energy Meters and Measurement, Medical and Health Monitoring Devices, Consumer Electronics and HMI Panels.
Industrial Motor Control and Drives
The MK10DN512VLK10 fits industrial motor control designs because its Cortex-M4 with FPU executes single-cycle MAC instructions needed for field-oriented control (FOC) loops, while the 100 MHz clock supports moderate PWM frequencies up to 20 kHz with full PID update each cycle. The on-chip 16-bit ADC and FlexTimer PWM module provide simultaneous current sensing and three-phase PWM generation without external components. The 512 KB flash holds FOC libraries and application code with room for field updates, while 128 KB RAM supports dual-shunt current sampling buffers and stack-heavy control structures. Compared with Cortex-M0 parts, the M4 with FPU delivers 3-4x faster FOC step times for PMSM and BLDC motors under 1 kW. Industrial-grade -40C to +105C operation handles drive cabinet environments without derating.
Direkomendasikan
Building Automation and HVAC Controllers
The MK10DN512VLK10 suits building automation controllers because its rich mixed-signal peripherals integrate op-amps, comparators, 16-bit ADC and 12-bit DAC for direct sensor conditioning on the PCB, reducing analog BOM. The 512 KB flash comfortably stores BACnet or Modbus stacks plus HVAC state machines, while USB OTG full-speed enables local commissioning and firmware updates from a laptop. The wide 1.71 V to 3.6 V supply range tolerates typical 24 V industrial rail step-down outputs with margin. Compared with smaller Kinetis K0 parts, the MK10's larger SRAM supports multi-protocol stacks (Modbus + BACnet + proprietary) concurrently. The -40C to +105C rating handles unheated basement and rooftop enclosures.
Direkomendasikan
USB Peripherals and HID Devices
The MK10DN512VLK10 targets USB peripherals because the on-chip USB OTG full-speed PHY eliminates external USB transceivers, saving PCB area and BOM cost in HID, custom-keyboards, USB sensors, and USB-to-UART bridge designs. The Cortex-M4 with FPU handles HID report processing and on-board DSP such as audio or gesture recognition at 100 MHz without CPU bottleneck. The 512 KB flash fits USB stack plus composite device classes (HID + CDC + vendor), while 128 KB RAM supports double-buffered USB endpoints. The 80-LQFP package is cost-effective and easily hand-solderable for prototypes. Compared with Cortex-M0+ USB parts, the MK10 offers more flash for richer device firmware.
Direkomendasikan
Smart Energy Meters and Measurement
The MK10DN512VLK10 fits single-phase smart meter designs because its on-chip 16-bit ADC and op-amps support direct current-sensing analog front ends, while the Cortex-M4 with FPU computes RMS, harmonics and power-quality metrics efficiently. The 512 KB flash stores DLMS/COSEM or proprietary metering stacks plus calibration data, while 128 KB RAM supports simultaneous metrology and communication tasks. The on-chip EEPROM emulation preserves tariff and billing data across power cycles, reducing external memory. The wide operating temperature range handles outdoor meter enclosures. Compared with fixed-function metering ICs, the MK10 offers more flexibility for multi-standard support.
Direkomendasikan
Medical and Health Monitoring Devices
The MK10DN512VLK10 supports medical peripheral and health-monitoring device designs because the on-chip 16-bit ADC and op-amps condition bioelectric signals (ECG, EMG, SpO2 analog front ends) without external instrumentation amplifiers in cost-optimized versions. The Cortex-M4 with DSP extensions executes filtering and feature extraction in real time at low CPU load. The 512 KB flash stores DSP libraries and UI code, while 128 KB RAM supports sample buffers for pulse oximetry and ECG. The -40C to +105C range covers portable and clinical environments. Designers targeting FDA/IEC 62304 certification should still validate full IEC 60601 EMI/ESD performance at the system level.
Direkomendasikan
Consumer Electronics and HMI Panels
The MK10DN512VLK10 fits consumer HMI panels and appliances because the Cortex-M4 with FPU drives capacitive-touch processing and graphical UI rendering on segment LCD or low-cost TFT displays efficiently at 100 MHz. The 512 KB flash holds rich UI assets and connectivity stacks, while 128 KB RAM supports frame buffers and USB upgrade paths. The on-chip op-amps and comparators interface directly with capacitive touch sensors and rotary encoders. Compared with Cortex-M0+ parts, the M4 supports smoother animation and more complex UI logic. The wide temperature range handles appliance and outdoor consumer environments.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MK10DN512VLK10 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MK10DN512ZVLK10 | MK20DN512VLK10 | MK10DN256VLK10 | MK10DX256VLK10 | MK10DN512VLL10 |
|---|---|---|---|---|---|---|
| Package | 80-LQFP (12x12 mm) | 80-LQFP (12x12 mm) - same | 80-LQFP (12x12 mm) - same | 80-LQFP (12x12 mm) - same | 80-LQFP (12x12 mm) - same | 100-LQFP - different (not drop-in) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU |
| Maximum CPU Clock | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Flash Size | 512 KB | 512 KB | 512 KB | 256 KB (-50%) | 256 KB (-50%) | 512 KB |
| RAM Size | 128 KB | 128 KB | 128 KB | 64 KB (-50%) | 32 KB (-75%) | 128 KB |
| USB OTG | Yes (full-speed with on-chip PHY) | Yes (full-speed) | Yes (full-speed) | Yes (full-speed) | Yes (full-speed) | Yes (full-speed) |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Security / Tamper | Standard | Standard | Enhanced (security/tamper) | Standard | Standard (low-power variant) | Standard |
Diferensiator Kunci
- On-chip USB OTG full-speed PHY eliminates external transceiver (vsMKL04Z8VTG4)
- Larger flash and RAM versus K10 256KB variants (vsMK10DN256VLK10)
- Same 80-LQFP footprint as K20 sub-family for easy upgrade (vsMK20DN512VLK10)
Catatan Desain
Decoupling: place a 100 nF ceramic cap as close as possible to each VDD/VSS pin pair on the MK10DN512VLK10. Add a 4.7 uF or 10 uF bulk capacitor on each main VDD rail near the MCU. Use a ferrite bead or small inductor if the digital supply shares a rail with analog VREF to prevent digital noise coupling into ADC reference voltage.
PCB layout: route USB DP and DM as a 90-ohm differential pair with controlled impedance, keep them short and away from switching nodes. Provide a 4-layer or 2-layer PCB stackup with continuous ground plane under the MCU to reduce EMI. Exposed pad (if any) of the LQFP package is not present; standard lead-frame leads only.
Programming: the MK10DN512VLK10 enters reset if NMI/test pins are inadvertently asserted. Configure reset and NMI pins with proper pull-ups (typically 10 kohm) and follow the Kinetis flash programming guide before in-system programming. Watchdog must be serviced in low-power modes or it will reset the part unexpectedly.
Estimated: at 100 MHz CPU clock, typical core supply current is around 30-40 mA, leading to ~0.1 W dissipation. At maximum CPU loading with peripherals active, dissipation can reach 0.3-0.4 W. The 80-LQFP package has theta_JA around 50-60 C/W, yielding a junction temperature rise of ~25 C above ambient, which is well within the 105C maximum rating.
Informasi Konformitas
RoHS compliant per NXP product page. Not AEC-Q100 qualified - choose KEA or S32K automotive parts for AEC-Q100 automotive applications.
