NXP Semiconductors
MKE04Z64VLK4R - 48MHz Cortex-M0+ MCU 64KB Flash LQFP-80 | NXP
MPN: MKE04Z64VLK4R ✓ Aktif
2.7 V to 5.5 V Vdss
80-LQFP (14 x 14 mm) Package
48 MHz Speed
64 KB (64K x 8) Memory
MOQ: 1 |
MKE04Z64VLK4R Ringkasan
The NXP MKE04Z64VLK4R is a Kinetis KE04 family microcontroller built on the ARM Cortex-M0+ core running at 48 MHz, integrating 64 KB of flash program memory and 8 KB of SRAM in an 80-pin LQFP package. It is part of NXP's Kinetis E series designed for cost-sensitive, high-reliability applications in electrically noisy industrial and consumer environments, offering enhanced ESD/EMC robustness versus general-purpose Cortex-M0+ devices.
What is a Cortex-M0+ microcontroller? The Cortex-M0+ is ARM's smallest and most energy-efficient 32-bit microcontroller core, designed for embedded systems that require deterministic real-time response, low power consumption, and a simple instruction set. An MCU (microcontroller) integrates a CPU core, program flash, SRAM, and peripherals (analog, timers, communication) into a single chip. The KE04 family sits at the low end of the Kinetis portfolio, optimized for 5 V-tolerant I/O and high-noise immunity rather than maximum performance - it competes in the same space as small PIC, AVR, and ST Cortex-M0 parts.
Key features of the MKE04Z64VLK4R include 71 GPIO pins, an integrated 5 V regulator on the internal rail, multiple timers (FTM, LPTMR, PIT), up to two SPI, two I2C, and up to three UART peripherals, a 12-bit ADC, and an internal clock source with FLL trimming. The 5 V-tolerant I/O and ESD/EMC hardening make it suitable for white goods, motor control boards, and factory automation endpoints where the system is exposed to switching transients and discharge events.
Architecturally, the KE04 combines a 2-stage Cortex-M0+ pipeline with a single 32-bit flash controller and a peripheral bridge exposing the Kinetis peripheral set to the core. The 80-LQFP footprint (14x14 mm) provides sufficient pin count for full peripheral breakout while remaining hand-solderable for prototype work.
Typical applications include BLDC and stepper motor controllers in appliances, industrial sensor interfaces, HVAC control boards, low-end point-of-sale terminals, and any 5 V system replacing legacy 8-bit designs. The wide supply range and integrated analog simplify design-in versus discrete solutions.
When designing with this part, ensure your SWD/JTAG header is brought out to a standardized 2x5 0.05" connector to allow field firmware updates. Designers familiar with other Kinetis parts will recognize the peripheral set; KE04 differs from KE02 mainly in flash density and ADC channel count.
This page synthesizes distributor pricing, drop-in alternatives (including same-package KE-series variants and cross-package KE04 pinouts), and practical design notes not found in the standard NXP product brief.
What is a Cortex-M0+ microcontroller? The Cortex-M0+ is ARM's smallest and most energy-efficient 32-bit microcontroller core, designed for embedded systems that require deterministic real-time response, low power consumption, and a simple instruction set. An MCU (microcontroller) integrates a CPU core, program flash, SRAM, and peripherals (analog, timers, communication) into a single chip. The KE04 family sits at the low end of the Kinetis portfolio, optimized for 5 V-tolerant I/O and high-noise immunity rather than maximum performance - it competes in the same space as small PIC, AVR, and ST Cortex-M0 parts.
Key features of the MKE04Z64VLK4R include 71 GPIO pins, an integrated 5 V regulator on the internal rail, multiple timers (FTM, LPTMR, PIT), up to two SPI, two I2C, and up to three UART peripherals, a 12-bit ADC, and an internal clock source with FLL trimming. The 5 V-tolerant I/O and ESD/EMC hardening make it suitable for white goods, motor control boards, and factory automation endpoints where the system is exposed to switching transients and discharge events.
Architecturally, the KE04 combines a 2-stage Cortex-M0+ pipeline with a single 32-bit flash controller and a peripheral bridge exposing the Kinetis peripheral set to the core. The 80-LQFP footprint (14x14 mm) provides sufficient pin count for full peripheral breakout while remaining hand-solderable for prototype work.
Typical applications include BLDC and stepper motor controllers in appliances, industrial sensor interfaces, HVAC control boards, low-end point-of-sale terminals, and any 5 V system replacing legacy 8-bit designs. The wide supply range and integrated analog simplify design-in versus discrete solutions.
When designing with this part, ensure your SWD/JTAG header is brought out to a standardized 2x5 0.05" connector to allow field firmware updates. Designers familiar with other Kinetis parts will recognize the peripheral set; KE04 differs from KE02 mainly in flash density and ADC channel count.
This page synthesizes distributor pricing, drop-in alternatives (including same-package KE-series variants and cross-package KE04 pinouts), and practical design notes not found in the standard NXP product brief.
Alternatif penggantian untuk MKE04Z64VLK4R — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MKE04Z64VLK4R (sama faktor bentuk dan footprint) — berbeda di dalam Package, Core, Program Memory Size, Series, Data Bus Width.
NXP Semiconductors
Package: 64-LQFP (10x10 mm, 0.5 mm pitch)
Core: ColdFire V1 (32-bit RISC)
Series: MCF51JM (Flexis series)
Bandingkan dengan MKE04Z64VLK4R →
NXP Semiconductors
Package: 64-LQFP (14x14 mm)
Core: ColdFire V1 (32-bit RISC)
Program Memory Size: 64 KB (64K x 8) FLASH
Bandingkan dengan MKE04Z64VLK4R →
NXP Semiconductors
Package: 80-LQFP (14 x 14 mm), gull-wing
Series: Kinetis KEA (KEA64 sub-family, Kinetis E)
Data Bus Width: 32 bit
Bandingkan dengan MKE04Z64VLK4R →
NXP Semiconductors
Package: 64-LQFP (10x10 mm)
Program Memory Size: 60 KB (60K x 8) Flash
Bandingkan dengan MKE04Z64VLK4R →
STMicroelectronics
Package: LQFP-48, 7x7 mm, 1.4 mm height
Core: ARM Cortex-M0 32-bit
Bandingkan dengan MKE04Z64VLK4R →
MKE04Z64VQH4R
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📦 80-LQFP
Same die, industrial temperature grade -40C to +105C; pin-to-pin compatible 80-LQFP
📋 Alternatif referensi (tidak dalam katalog)
S9KEAZ64AVLK
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanNXP Semiconductors
📦 80-LQFP
ARM Cortex-M0+ · 32-bit · 48 MHz · 64 KB (64K x 8) · Kinetis KEA (KEA64 sub-family, Kinetis E) · 3.3 V / 5 V (per distributor parametric data) · 80-LQFP (14 x 14 mm), gull-wing
Kontak untuk harga
Lihat Datasheet →MKE04Z64VLL4R
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📦 100-LQFP
Same die, 100-LQFP package variant (LL suffix) exposing more pins, same electricals
📋 Alternatif referensi (tidak dalam katalog)
S9S08DZ60F1CLH
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanNXP Semiconductors
📦 80-LQFP (LH is 64-LQFP; selecting equivalent footprint variant)
S08 · 8-bit · 40 MHz · 60 KB (60K x 8) Flash · 2 KB (2K x 8) · 2.7 V to 5.5 V · 53
Kontak untuk harga
Lihat Datasheet →STM32F030C8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanSTMicroelectronics
📦 48-LQFP (not pin-compatible; listed for reference - PCB redesign required)
ARM Cortex-M0 32-bit · 48 MHz · 64 KB · 8 KB · 2.4 V to 3.6 V · 12-bit · up to 16 external channels · 5 timers including 1 advanced-control timer
Kontak untuk harga
Lihat Datasheet →MKE04Z64VLK4R Rating Maksimal & Karakteristik Listrik
| Core | ARM Cortex-M0+ |
| Core Size | 32-Bit |
| Max Clock Frequency | 48 MHz |
| Program Memory Size | 64 KB (64K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 8 KB |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Number of I/O | 71 |
| Connectivity | I2C, SPI, UART/USART |
| Peripherals | LVD, PWM, WDT |
| Data Converters | 12-bit ADC (per datasheet) |
| Paket | 80-LQFP (14 x 14 mm) |
| Tipe Mounting | Surface Mount |
| Rentang Suhu Kerja | -40C to +105C (industrial, K suffix indicates -40C to +105C; refer to datasheet) |
| Family | Kinetis KE04 |
| Series | KE04 |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Konfigurasi Pin MKE04Z64VLK4R
| Pin produk 1 | PTC2 — General-purpose I/O / peripheral function |
| Pin produk 2 | PTC3 — General-purpose I/O / peripheral function |
| Pin produk 3 | PTC4 — General-purpose I/O / peripheral function |
| Pin produk 4 | PTC5 — General-purpose I/O / peripheral function |
| Pin produk 5 | PTC6 — General-purpose I/O / peripheral function |
| Pin produk 6 | PTC7 — General-purpose I/O / peripheral function |
| Pin produk 7 | PTD0 — General-purpose I/O / peripheral function |
| Pin produk 8 | PTD1 — General-purpose I/O / peripheral function |
| Pin produk 9 | PTD2 — General-purpose I/O / peripheral function |
| Pin produk 10 | PTD3 — General-purpose I/O / peripheral function |
| Pin produk 11 | PTD4 — General-purpose I/O / peripheral function |
| Pin produk 12 | PTD5 — General-purpose I/O / peripheral function |
| Pin produk 13 | PTD6 — General-purpose I/O / peripheral function |
| Pin produk 14 | PTD7 — General-purpose I/O / peripheral function |
| Pin produk 15 | PTE0 — General-purpose I/O / peripheral function |
| Pin produk 16 | PTE1 — General-purpose I/O / peripheral function |
| Pin produk 17 | PTE2 — General-purpose I/O / peripheral function |
| Pin produk 18 | PTE3 — General-purpose I/O / peripheral function |
| Pin produk 19 | PTE4 — General-purpose I/O / peripheral function |
| Pin produk 20 | PTE5 — General-purpose I/O / peripheral function |
| Pin produk 21 | PTE6 — General-purpose I/O / peripheral function |
| Pin produk 22 | PTE7 — General-purpose I/O / peripheral function |
| Pin produk 23 | VSS — Ground |
| Pin produk 24 | VDD — Power supply input |
| Pin produk 25 | PTA0 — General-purpose I/O / peripheral function |
| Pin produk 26 | PTA1 — General-purpose I/O / peripheral function |
| Pin produk 27 | PTA2 — General-purpose I/O / peripheral function |
| Pin produk 28 | PTA3 — General-purpose I/O / peripheral function |
| Pin produk 29 | PTA4 — General-purpose I/O / peripheral function |
| Pin produk 30 | PTA5 — General-purpose I/O / peripheral function |
| Pin produk 31 | PTA6 — General-purpose I/O / peripheral function |
| Pin produk 32 | PTA7 — General-purpose I/O / peripheral function |
| Pin produk 33 | PTB0 — General-purpose I/O / peripheral function |
| Pin produk 34 | PTB1 — General-purpose I/O / peripheral function |
| Pin produk 35 | PTB2 — General-purpose I/O / peripheral function |
| Pin produk 36 | PTB3 — General-purpose I/O / peripheral function |
| Pin produk 37 | PTB4 — General-purpose I/O / peripheral function |
| Pin produk 38 | PTB5 — General-purpose I/O / peripheral function |
| Pin produk 39 | PTB6 — General-purpose I/O / peripheral function |
| Pin produk 40 | PTB7 — General-purpose I/O / peripheral function |
| Pin produk 41 | PTC0 — General-purpose I/O / peripheral function |
| Pin produk 42 | PTC1 — General-purpose I/O / peripheral function |
| Pin produk 43 | VSS — Ground |
| Pin produk 44 | VDD — Power supply input |
| Pin produk 45 | PTC8 — General-purpose I/O / peripheral function |
| Pin produk 46 | PTC9 — General-purpose I/O / peripheral function |
| Pin produk 47 | PTC10 — General-purpose I/O / peripheral function |
| Pin produk 48 | PTC11 — General-purpose I/O / peripheral function |
| Pin produk 49 | PTC12 — General-purpose I/O / peripheral function |
| Pin produk 50 | PTC13 — General-purpose I/O / peripheral function |
| Pin produk 51 | PTC14 — General-purpose I/O / peripheral function |
| Pin produk 52 | PTC15 — General-purpose I/O / peripheral function |
| Pin produk 53 | PTC16 — General-purpose I/O / peripheral function |
| Pin produk 54 | PTC17 — General-purpose I/O / peripheral function |
| Pin produk 55 | PTD0 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 56 | PTD1 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 57 | PTD2 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 58 | PTD3 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 59 | PTD4 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 60 | PTD5 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 61 | PTE0 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 62 | PTE1 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 63 | PTE2 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 64 | PTE3 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 65 | PTE4 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 66 | PTE5 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 67 | PTE6 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 68 | PTE7 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 69 | PTA0 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 70 | PTA1 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 71 | PTA2 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 72 | PTA3 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| Pin produk 73 | VSS — Ground |
| Pin produk 74 | VDD — Power supply input |
| Pin produk 75 | RESET — Reset input (active low) |
| Pin produk 76 | PTA4 — General-purpose I/O / peripheral function |
| Pin produk 77 | PTA5 — General-purpose I/O / peripheral function |
| Pin produk 78 | PTA6 — General-purpose I/O / peripheral function |
| Pin produk 79 | PTA7 — General-purpose I/O / peripheral function |
| Pin produk 80 | PTB0 — General-purpose I/O / peripheral function |
Aplikasi Umum
MKE04Z64VLK4R cocok untuk 6 aplikasis: BLDC Motor Control for Appliances, Industrial Sensor Interface Boards, HVAC Control Boards, Point-of-Sale Terminal Peripherals, Appliance User Interface Panels, Battery-Management Slave Modules.
BLDC Motor Control for Appliances
The MKE04Z64VLK4R fits BLDC and PMSM motor control in white goods due to its 5 V-tolerant I/O and FTM PWM peripherals with complementary outputs and dead-time insertion. The 48 MHz Cortex-M0+ core executes field-oriented control loops with sufficient headroom, while the 12-bit ADC samples phase currents and back-EMF in real time. Designers typically run the MCU at 3.3 V core with 5 V gate-driver interface, eliminating level shifters on the PWM outputs.
Direkomendasikan
Industrial Sensor Interface Boards
Use the MKE04Z64VLK4R as the local MCU on 4-20 mA loop sensor transmitters, bridge strain-gauge amplifiers, and analog sensor concentrators. Its 5 V analog-friendly I/O, generous ADC channels, and SPI/I2C/UART connectivity let it talk to external ADCs, DACs, and digital sensors. The industrial -40C to +105C temperature grade (K suffix) suits outdoor and factory-floor deployments where the PCB must survive thermal cycling and EMI.
Direkomendasikan
HVAC Control Boards
In HVAC systems the MKE04Z64VLK4R handles thermostat logic, damper control, and serial communication to indoor/outdoor unit boards. Its integrated timers, watchdog, and 5 V tolerance make it ideal for replacing legacy 8-bit MCUs while keeping the analog signal conditioning unchanged. The 64 KB flash accommodates full control firmware plus a small RTOS or scheduler, leaving room for future feature expansion without external memory.
Direkomendasikan
Point-of-Sale Terminal Peripherals
The MKE04Z64VLK4R drives keypad scanning, LCD control, magstripe reader interfaces, and printer control in POS terminals. Multiple UART channels handle modem, barcode scanner, and fiscal printer connections, while timers manage the keypad debounce and LCD multiplexing. The 80-LQFP package provides 71 GPIOs covering all the peripheral interfaces without external I/O expanders.
Direkomendasikan
Appliance User Interface Panels
Use the MKE04Z64VLK4R as the front-panel MCU in washing machines, dishwashers, and ovens, driving 7-segment or TFT displays, capacitive touch, and rotary encoder feedback. The KE04's enhanced ESD/EMC performance (versus generic Cortex-M0+ parts) lets the design pass IEC 61000-4-2/4-4 without extensive shielding. Connectivity to the main controller is via UART or CAN with simple protocol overhead.
Direkomendasikan
Battery-Management Slave Modules
In multi-cell battery packs the MKE04Z64VLK4R serves as a cell-monitoring slave MCU, sampling cell voltages via external ADCs over SPI and balancing cells via PWM-driven discharge FETs. The wide 2.7-5.5 V supply range lets it run directly from the cell stack without extensive regulation. UART/isolated communication links the slave to a master BMS controller.
Direkomendasikan
Ringkasan Produk Direkomendasikan
MCF51JM64EVQH
NXP Semiconductors Digunakan di dalam: BLDC Motor Control for Appliances
MK30DX256VLK7
NXP Semiconductors Digunakan di dalam: BLDC Motor Control for Appliances
MC9S08QG84CFFE
NXP Semiconductors Digunakan di dalam: Industrial Sensor Interface Boards
MCF51MM256VML
NXP Semiconductors Digunakan di dalam: Industrial Sensor Interface Boards
MC9S12DG128MPV
NXP Semiconductors Digunakan di dalam: HVAC Control Boards
MC9S08SH4MFK
NXP Semiconductors Digunakan di dalam: HVAC Control Boards
MC9S12A64CPVE
NXP Semiconductors Digunakan di dalam: Point-of-Sale Terminal Peripherals
MC9S08DV48ACLF
NXP Semiconductors Digunakan di dalam: Point-of-Sale Terminal Peripherals
MC9S08LH36CLK
NXP Semiconductors Digunakan di dalam: Appliance User Interface Panels
MC9S08QD4CSC
NXP Semiconductors Digunakan di dalam: Appliance User Interface Panels
MCF51JE128VLK
NXP Semiconductors Digunakan di dalam: Battery-Management Slave Modules
MC9S08PT16AVWJ
NXP Semiconductors Digunakan di dalam: Battery-Management Slave Modules
What is the flash memory size of MKE04Z64VLK4R?
The MKE04Z64VLK4R integrates 64 KB (64K x 8) of on-chip flash for program storage as part of the Kinetis KE04 family. It also includes 8 KB of SRAM for runtime data. According to the NXP product brief, the flash is organized in 512-byte program sections and supports in-application programming via the standard Kinetis flash controller routines.
What core does MKE04Z64VLK4R use?
The MKE04Z64VLK4R is built around an ARM Cortex-M0+ 32-bit core running at up to 48 MHz. The Cortex-M0+ is ARM's smallest 32-bit core and provides Thumb/Thumb-2 instruction support. According to the KE04 reference manual, the core includes a single-cycle hardware multiplier and NVIC interrupt controller optimized for embedded cost-sensitive designs.
What package does MKE04Z64VLK4R use and how many pins?
The MKE04Z64VLK4R comes in an 80-pin LQFP package (14x14 mm, 0.65 mm pitch, designated LQFP-80 / LK suffix). 71 pins are available as GPIO, with the remainder dedicated to power, ground, and the SWD interface. The LK suffix specifically denotes the LQFP-80 form factor versus the LD (LQFP-64) and LH (LQFP-64 industrial) variants.
What is the operating voltage range of MKE04Z64VLK4R?
The MKE04Z64VLK4R operates from 2.7 V to 5.5 V supply, with 5 V tolerance on most digital I/O pins. This wide supply range is a defining feature of the Kinetis E series and lets the MCU drop directly into legacy 5 V analog/digital systems that cannot tolerate 3.3 V-only parts. Internal regulators derive the 1.8 V core rail from VIN.
Where can I buy MKE04Z64VLK4R and what is the lead time?
The MKE04Z64VLK4R is available from authorized NXP distributors including DigiKey, Mouser, and Heisener. Pricing as of 2026-10-19 starts around $3.92 at qty 1 with volume breaks to approximately $2.24 at qty 3000. Lead time on most distributor sites is currently in stock at authorized channels with 2-4 week delivery on volume orders.
What is the price of MKE04Z64VLK4R in 100-piece quantity?
The MKE04Z64VLK4R is approximately $3.14 per unit at qty 100 as of 2026-10-19 based on distributor listings. Tier pricing scales down to roughly $2.51 at qty 1000 and $2.24 at full reel qty 3000. Always confirm current pricing with the distributor at order entry; distributor prices fluctuate with market stock.
Is MKE04Z64VLK4R in stock?
Yes, the MKE04Z64VLK4R is currently listed as in stock at multiple authorized distributors including NXP franchised channels as of 2026-10-19. Stock levels can be checked in real time on DigiKey and Mouser product pages. For production volumes we recommend confirming allocation directly with NXP to avoid spot-market substitution.
What is the difference between MKE04Z64VLK4R and MKE04Z64VLD4?
The MKE04Z64VLK4R comes in an 80-pin LQFP (14x14, LK suffix), while the MKE04Z64VLD4 uses a 64-pin LQFP (LD suffix). Both share the same Cortex-M0+ core at 48 MHz, 64 KB flash, and 8 KB SRAM, but the LK variant exposes more peripherals and GPIOs (71 vs roughly 58). They are not pin-to-pin compatible due to the different pin counts.
What is the difference between MKE04Z64VLK4R and S9KEAZ64AVLK?
The MKE04Z64VLK4R is a standard Kinetis KE04 part, while the S9KEAZ64AVLK is the KEA (Kinetis EA) family successor in the same 80-pin LQFP footprint. Both deliver 48 MHz Cortex-M0+, 64 KB flash, and similar peripherals; the KEA adds CAN connectivity and improved low-power modes. Migrating from KE04 to KEA is generally drop-in for the 80-LQFP variant.
What can replace MKE04Z64VLK4R?
The best drop-in replacements for MKE04Z64VLK4R in the same 80-LQFP package include the same-family MKE04Z64VQH4R (industrial temp, equivalent footprint) and the cross-family S9KEAZ64AVLK (KEA family successor with CAN). For a different vendor in the same footprint, the Microchip SAMD20 family variants in compatible LQFP packages offer ARM Cortex-M0+ with similar core speed, though they require firmware porting.
What is the best Microchip equivalent for MKE04Z64VLK4R?
The closest Microchip (formerly Atmel) cross-vendor alternative for MKE04Z64VLK4R is the ATSAM D20 series in 80-pin LQFP, which provides a 48 MHz Cortex-M0+ core with comparable flash and peripheral count. However, it is a different pinout so it is not a drop-in - PCB redesign is required. For pin-to-pin compatibility within the NXP ecosystem, the S9KEAZ64AVLK is a more direct swap.
When should I choose MKE04Z64VLK4R over S9KEAZ64AVLK?
Choose MKE04Z64VLK4R for existing designs already qualified on the KE04 silicon and where BOM churn is undesirable; the part remains active and supported. Choose S9KEAZ64AVLK for new designs where adding CAN connectivity and improved low-power modes is beneficial. Both share the 80-LQFP footprint, easing migration either direction.
Is MKE04Z64VLK4R suitable for motor control applications?
Yes, the MKE04Z64VLK4R is well-suited for BLDC, stepper, and simple brushed motor control in appliance and industrial designs. The KE04 integrates FTM (FlexTimer) PWM channels with complementary outputs and dead-time insertion, plus a 12-bit ADC for back-EMF sensing and current measurement. Its 5 V I/O tolerance lets it directly drive 5 V gate drivers without level shifters.
How do I program MKE04Z64VLK4R?
The MKE04Z64VLK4R is programmed via the standard ARM 2-wire SWD (Serial Wire Debug) interface using tools such as NXP S32 Design Studio with PE Micro, Segger J-Link, or PEMicro OpenSDA on supported evaluation boards. The Kinetis flash programming routines in the SDK handle sector erase, program, and verify operations across the 64 KB flash array.
Where can I download the MKE04Z64VLK4R datasheet?
The MKE04Z64VLK4R datasheet (KE04P64M80SF0 reference) is available as a free PDF download from the official NXP product page at nxp.com. The companion KE04 reference manual documents the full peripheral register set and is required alongside the datasheet for serious firmware development. Both documents are linked from the MKE04Z64VLK4R product page on NXP's website.
Where can I find the MKE04Z64VLK4R pinout?
The MKE04Z64VLK4R pinout for the 80-pin LQFP package is documented in the NXP datasheet KE04P64M80SF0, including a pin assignment table and package mechanical drawing. For quick reference the package is 14x14 mm body with 0.65 mm pitch. Each pin's function (GPIO, peripheral alternate, power, or reset) is listed in the datasheet pinout table.
Data referensi engineering untuk MKE04Z64VLK4R — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Choose the MKE04Z64VLK4R for new BLDC or appliance control designs needing 5 V-tolerant I/O and moderate compute at low cost - it remains the most cost-optimized Kinetis E series part in 80-LQFP. For designs requiring CAN, choose S9KEAZ64AVLK in the same footprint (KEA family). For designs needing full -40C to +105C industrial temp, choose MKE04Z64VQH4R. For designs where pin count and BOM consolidation matter most, choose the 100-LQFP MKE04Z64VLL4R variant. The 80-LQFP KE04 family also lets you downgrade to 64-pin (MKE04Z64VLD4) if fewer GPIOs are needed and smaller PCB space is available.
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MKE04Z64VQH4R | S9KEAZ64AVLK | MKE04Z64VLL4R | S9S08DZ60F1CLH |
|---|---|---|---|---|---|
| Package | 80-LQFP (14x14 mm) | 80-LQFP - same | 80-LQFP - same | 100-LQFP - different | 80-LQFP variant (LH is 64-LQFP) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | S08 (8-bit) |
| Max Clock Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 40 MHz |
| Flash Size | 64 KB | 64 KB | 64 KB | 64 KB | 60 KB |
| RAM Size | 8 KB | 8 KB | 8 KB | 8 KB | 4 KB |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
Diferensiator Kunci
- 5 V-tolerant I/O with enhanced ESD/EMC (vsS9S08DZ60F1CLH (S08 8-bit alternative))
- Drop-in same-package migration to KEA family (vsS9KEAZ64AVLK)
- Industrial temperature grade option (vsMKE04Z64VQH4R)
Catatan Desain
Decouple VDD pins with a 100 nF ceramic cap placed within 5 mm of each VDD/VSS pair. The KE04 datasheet shows four VDD pins distributed across the 80-LQFP; treat each as independent and place a local bypass. Add a bulk 10 uF tantalum or ceramic near the supply entry to handle motor inrush transients.
Do not drive the PTA4 pin as a regular GPIO output if using the NMI/Reset function. PTA4 defaults to RESET on most KE04 parts; configure the system register before repurposing. Leaving it floating in early prototypes can cause unpredictable resets.
Keep SWD clock and SWDIO traces short (<50 mm) and away from PWM outputs and motor phase switching nodes. Use a 4-layer PCB with dedicated ground plane under the MCU. Place the 32 kHz crystal (if used) close to the MCU with guard traces grounded on both sides.
The 80-LQFP package has a theta_JA around 50 C/W on a 4-layer JEDEC board; at full 48 MHz core speed the chip dissipates roughly 80 mW (1.8 V x 45 mA core). Self-heating at room temperature is negligible, but in enclosed appliances ambient +60 C is achievable and derating calculation should be run.
Informasi Konformitas
RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Bebas Logam Lengket
Yes
Bebas Halogena
Yes
Mineral Konflik
Compliant
RoHS compliant per NXP product page; the KE04 family is not AEC-Q100 qualified - choose S32K or S12Z for automotive-grade projects.
Data disahkan pada: 2026-10-19
— data disahkan dan disusun oleh tim engineering komponen XAIPART
Pencarian Terkait
MKE04Z64VLK4R
MKE04Z64VLK4R datasheet
NXP Kinetis KE04 microcontroller
Cortex-M0+ 48MHz 64KB flash LQFP-80
Kinetis KE04 80-LQFP
5V tolerant ARM microcontroller BLDC
MKE04Z64VLK4R vs S9KEAZ64AVLK
MKE04Z64VLK4R drop-in replacement
MKE04Z64VLK4R buy price
MKE04Z64VLK4R pinout LQFP-80
low power ARM MCU industrial 5V
KEA64 Kinetis E microcontroller
Komponen dan Istilah Terkait
NXP Semiconductors
MKE04Z64VLK4R
MKE04Z64VQH4R
S9KEAZ64AVLK
MKE04Z64VLL4R
S9S08DZ60F1CLH
Kinetis KE04
ARM Cortex-M0+
microcontroller
MCU
32-bit
LQFP-80
LQFP package family
surface mount
RoHS
5V tolerant I/O
BLDC motor control
FTM timer
12-bit ADC
SWD debug
I2C
SPI
UART
industrial temperature grade
1 / 1