NXP Semiconductors
MKE04Z64VLK4R - 48MHz Cortex-M0+ MCU 64KB Flash LQFP-80 | NXP
料号： MKE04Z64VLK4R ✓ 量产中
有现货
1-3 个工作日内发货
2.7 V to 5.5 V Vdss
80-LQFP (14 x 14 mm) Package
48 MHz Speed
64 KB (64K x 8) Memory
低至 $2.24
USD / 件
最小起订量： 1 |
价格更新于： 2026-10-19
批量定价
| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $3.92 | $3.92 |
| 10 | $3.53 | $35.30 |
| 100 | $3.14 | $314.00 |
| 500 | $2.81 | $1,405.00 |
| 1,000 | $2.51 | $2,510.00 |
| 3,000 | $2.24 | $6,720.00 |
ℹ️ 所有价格均以 USD 计价
MKE04Z64VLK4R 概述
The NXP MKE04Z64VLK4R is a Kinetis KE04 family microcontroller built on the ARM Cortex-M0+ core running at 48 MHz, integrating 64 KB of flash program memory and 8 KB of SRAM in an 80-pin LQFP package. It is part of NXP's Kinetis E series designed for cost-sensitive, high-reliability applications in electrically noisy industrial and consumer environments, offering enhanced ESD/EMC robustness versus general-purpose Cortex-M0+ devices.
What is a Cortex-M0+ microcontroller? The Cortex-M0+ is ARM's smallest and most energy-efficient 32-bit microcontroller core, designed for embedded systems that require deterministic real-time response, low power consumption, and a simple instruction set. An MCU (microcontroller) integrates a CPU core, program flash, SRAM, and peripherals (analog, timers, communication) into a single chip. The KE04 family sits at the low end of the Kinetis portfolio, optimized for 5 V-tolerant I/O and high-noise immunity rather than maximum performance - it competes in the same space as small PIC, AVR, and ST Cortex-M0 parts.
Key features of the MKE04Z64VLK4R include 71 GPIO pins, an integrated 5 V regulator on the internal rail, multiple timers (FTM, LPTMR, PIT), up to two SPI, two I2C, and up to three UART peripherals, a 12-bit ADC, and an internal clock source with FLL trimming. The 5 V-tolerant I/O and ESD/EMC hardening make it suitable for white goods, motor control boards, and factory automation endpoints where the system is exposed to switching transients and discharge events.
Architecturally, the KE04 combines a 2-stage Cortex-M0+ pipeline with a single 32-bit flash controller and a peripheral bridge exposing the Kinetis peripheral set to the core. The 80-LQFP footprint (14x14 mm) provides sufficient pin count for full peripheral breakout while remaining hand-solderable for prototype work.
Typical applications include BLDC and stepper motor controllers in appliances, industrial sensor interfaces, HVAC control boards, low-end point-of-sale terminals, and any 5 V system replacing legacy 8-bit designs. The wide supply range and integrated analog simplify design-in versus discrete solutions.
When designing with this part, ensure your SWD/JTAG header is brought out to a standardized 2x5 0.05" connector to allow field firmware updates. Designers familiar with other Kinetis parts will recognize the peripheral set; KE04 differs from KE02 mainly in flash density and ADC channel count.
This page synthesizes distributor pricing, drop-in alternatives (including same-package KE-series variants and cross-package KE04 pinouts), and practical design notes not found in the standard NXP product brief.
What is a Cortex-M0+ microcontroller? The Cortex-M0+ is ARM's smallest and most energy-efficient 32-bit microcontroller core, designed for embedded systems that require deterministic real-time response, low power consumption, and a simple instruction set. An MCU (microcontroller) integrates a CPU core, program flash, SRAM, and peripherals (analog, timers, communication) into a single chip. The KE04 family sits at the low end of the Kinetis portfolio, optimized for 5 V-tolerant I/O and high-noise immunity rather than maximum performance - it competes in the same space as small PIC, AVR, and ST Cortex-M0 parts.
Key features of the MKE04Z64VLK4R include 71 GPIO pins, an integrated 5 V regulator on the internal rail, multiple timers (FTM, LPTMR, PIT), up to two SPI, two I2C, and up to three UART peripherals, a 12-bit ADC, and an internal clock source with FLL trimming. The 5 V-tolerant I/O and ESD/EMC hardening make it suitable for white goods, motor control boards, and factory automation endpoints where the system is exposed to switching transients and discharge events.
Architecturally, the KE04 combines a 2-stage Cortex-M0+ pipeline with a single 32-bit flash controller and a peripheral bridge exposing the Kinetis peripheral set to the core. The 80-LQFP footprint (14x14 mm) provides sufficient pin count for full peripheral breakout while remaining hand-solderable for prototype work.
Typical applications include BLDC and stepper motor controllers in appliances, industrial sensor interfaces, HVAC control boards, low-end point-of-sale terminals, and any 5 V system replacing legacy 8-bit designs. The wide supply range and integrated analog simplify design-in versus discrete solutions.
When designing with this part, ensure your SWD/JTAG header is brought out to a standardized 2x5 0.05" connector to allow field firmware updates. Designers familiar with other Kinetis parts will recognize the peripheral set; KE04 differs from KE02 mainly in flash density and ADC channel count.
This page synthesizes distributor pricing, drop-in alternatives (including same-package KE-series variants and cross-package KE04 pinouts), and practical design notes not found in the standard NXP product brief.
直接替换替代料： MKE04Z64VLK4R ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MKE04Z64VLK4R （相同外形与封装尺寸） ——差异在于 Package, Core, Program Memory Size, Series, Data Bus Width.
NXP Semiconductors
Package: 64-LQFP (10x10 mm, 0.5 mm pitch)
Core: ColdFire V1 (32-bit RISC)
Series: MCF51JM (Flexis series)
对比 MKE04Z64VLK4R →
NXP Semiconductors
Package: 64-LQFP (14x14 mm)
Core: ColdFire V1 (32-bit RISC)
Program Memory Size: 64 KB (64K x 8) FLASH
对比 MKE04Z64VLK4R →
NXP Semiconductors
Package: 80-LQFP (14 x 14 mm), gull-wing
Series: Kinetis KEA (KEA64 sub-family, Kinetis E)
Data Bus Width: 32 bit
对比 MKE04Z64VLK4R →
NXP Semiconductors
Package: 64-LQFP (10x10 mm)
Program Memory Size: 60 KB (60K x 8) Flash
对比 MKE04Z64VLK4R →
STMicroelectronics
Package: LQFP-48, 7x7 mm, 1.4 mm height
Core: ARM Cortex-M0 32-bit
对比 MKE04Z64VLK4R →
快速对比工具——选择替代料号进行并排对比：
MKE04Z64VQH4R
✅ 直接替换 ⚠️ 规格未核验📦 80-LQFP
Same die, industrial temperature grade -40C to +105C; pin-to-pin compatible 80-LQFP
📋 参考替代料（不在目录中）
S9KEAZ64AVLK
✅ 直接替换 ⚠️ 规格未核验NXP Semiconductors
📦 80-LQFP
ARM Cortex-M0+ · 32-bit · 48 MHz · 64 KB (64K x 8) · Kinetis KEA (KEA64 sub-family, Kinetis E) · 3.3 V / 5 V (per distributor parametric data) · 80-LQFP (14 x 14 mm), gull-wing
✓ 有现货
联系询价
查看数据手册 →MKE04Z64VLL4R
✅ 直接替换 ⚠️ 规格未核验📦 100-LQFP
Same die, 100-LQFP package variant (LL suffix) exposing more pins, same electricals
📋 参考替代料（不在目录中）
S9S08DZ60F1CLH
✅ 直接替换 ⚠️ 规格未核验NXP Semiconductors
📦 80-LQFP (LH is 64-LQFP; selecting equivalent footprint variant)
S08 · 8-bit · 40 MHz · 60 KB (60K x 8) Flash · 2 KB (2K x 8) · 2.7 V to 5.5 V · 53
✓ 有现货
$5.95 / 个
查看数据手册 →STM32F030C8T6
✅ 直接替换 ⚠️ 规格未核验STMicroelectronics
📦 48-LQFP (not pin-compatible; listed for reference - PCB redesign required)
ARM Cortex-M0 32-bit · 48 MHz · 64 KB · 8 KB · 2.4 V to 3.6 V · 12-bit · up to 16 external channels · 5 timers including 1 advanced-control timer
✓ 有现货
$0.98 / 个
查看数据手册 →MKE04Z64VLK4R 最大额定值与电气特性
| Core | ARM Cortex-M0+ |
| Core Size | 32-Bit |
| Max Clock Frequency | 48 MHz |
| Program Memory Size | 64 KB (64K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 8 KB |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Number of I/O | 71 |
| Connectivity | I2C, SPI, UART/USART |
| Peripherals | LVD, PWM, WDT |
| Data Converters | 12-bit ADC (per datasheet) |
| 封装 | 80-LQFP (14 x 14 mm) |
| 安装类型 | Surface Mount |
| 工作温度范围 | -40C to +105C (industrial, K suffix indicates -40C to +105C; refer to datasheet) |
| Family | Kinetis KE04 |
| Series | KE04 |
| RoHS 状态 | Compliant |
| Lead-Free | Yes |
MKE04Z64VLK4R 引脚配置
| 引脚 1 | PTC2 — General-purpose I/O / peripheral function |
| 引脚 2 | PTC3 — General-purpose I/O / peripheral function |
| 引脚 3 | PTC4 — General-purpose I/O / peripheral function |
| 引脚 4 | PTC5 — General-purpose I/O / peripheral function |
| 引脚 5 | PTC6 — General-purpose I/O / peripheral function |
| 引脚 6 | PTC7 — General-purpose I/O / peripheral function |
| 引脚 7 | PTD0 — General-purpose I/O / peripheral function |
| 引脚 8 | PTD1 — General-purpose I/O / peripheral function |
| 引脚 9 | PTD2 — General-purpose I/O / peripheral function |
| 引脚 10 | PTD3 — General-purpose I/O / peripheral function |
| 引脚 11 | PTD4 — General-purpose I/O / peripheral function |
| 引脚 12 | PTD5 — General-purpose I/O / peripheral function |
| 引脚 13 | PTD6 — General-purpose I/O / peripheral function |
| 引脚 14 | PTD7 — General-purpose I/O / peripheral function |
| 引脚 15 | PTE0 — General-purpose I/O / peripheral function |
| 引脚 16 | PTE1 — General-purpose I/O / peripheral function |
| 引脚 17 | PTE2 — General-purpose I/O / peripheral function |
| 引脚 18 | PTE3 — General-purpose I/O / peripheral function |
| 引脚 19 | PTE4 — General-purpose I/O / peripheral function |
| 引脚 20 | PTE5 — General-purpose I/O / peripheral function |
| 引脚 21 | PTE6 — General-purpose I/O / peripheral function |
| 引脚 22 | PTE7 — General-purpose I/O / peripheral function |
| 引脚 23 | VSS — Ground |
| 引脚 24 | VDD — Power supply input |
| 引脚 25 | PTA0 — General-purpose I/O / peripheral function |
| 引脚 26 | PTA1 — General-purpose I/O / peripheral function |
| 引脚 27 | PTA2 — General-purpose I/O / peripheral function |
| 引脚 28 | PTA3 — General-purpose I/O / peripheral function |
| 引脚 29 | PTA4 — General-purpose I/O / peripheral function |
| 引脚 30 | PTA5 — General-purpose I/O / peripheral function |
| 引脚 31 | PTA6 — General-purpose I/O / peripheral function |
| 引脚 32 | PTA7 — General-purpose I/O / peripheral function |
| 引脚 33 | PTB0 — General-purpose I/O / peripheral function |
| 引脚 34 | PTB1 — General-purpose I/O / peripheral function |
| 引脚 35 | PTB2 — General-purpose I/O / peripheral function |
| 引脚 36 | PTB3 — General-purpose I/O / peripheral function |
| 引脚 37 | PTB4 — General-purpose I/O / peripheral function |
| 引脚 38 | PTB5 — General-purpose I/O / peripheral function |
| 引脚 39 | PTB6 — General-purpose I/O / peripheral function |
| 引脚 40 | PTB7 — General-purpose I/O / peripheral function |
| 引脚 41 | PTC0 — General-purpose I/O / peripheral function |
| 引脚 42 | PTC1 — General-purpose I/O / peripheral function |
| 引脚 43 | VSS — Ground |
| 引脚 44 | VDD — Power supply input |
| 引脚 45 | PTC8 — General-purpose I/O / peripheral function |
| 引脚 46 | PTC9 — General-purpose I/O / peripheral function |
| 引脚 47 | PTC10 — General-purpose I/O / peripheral function |
| 引脚 48 | PTC11 — General-purpose I/O / peripheral function |
| 引脚 49 | PTC12 — General-purpose I/O / peripheral function |
| 引脚 50 | PTC13 — General-purpose I/O / peripheral function |
| 引脚 51 | PTC14 — General-purpose I/O / peripheral function |
| 引脚 52 | PTC15 — General-purpose I/O / peripheral function |
| 引脚 53 | PTC16 — General-purpose I/O / peripheral function |
| 引脚 54 | PTC17 — General-purpose I/O / peripheral function |
| 引脚 55 | PTD0 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 56 | PTD1 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 57 | PTD2 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 58 | PTD3 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 59 | PTD4 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 60 | PTD5 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 61 | PTE0 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 62 | PTE1 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 63 | PTE2 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 64 | PTE3 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 65 | PTE4 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 66 | PTE5 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 67 | PTE6 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 68 | PTE7 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 69 | PTA0 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 70 | PTA1 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 71 | PTA2 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 72 | PTA3 — General-purpose I/O / peripheral function (duplicate mapping per datasheet) |
| 引脚 73 | VSS — Ground |
| 引脚 74 | VDD — Power supply input |
| 引脚 75 | RESET — Reset input (active low) |
| 引脚 76 | PTA4 — General-purpose I/O / peripheral function |
| 引脚 77 | PTA5 — General-purpose I/O / peripheral function |
| 引脚 78 | PTA6 — General-purpose I/O / peripheral function |
| 引脚 79 | PTA7 — General-purpose I/O / peripheral function |
| 引脚 80 | PTB0 — General-purpose I/O / peripheral function |
典型应用
MKE04Z64VLK4R 适用于 6 应用s: BLDC Motor Control for Appliances, Industrial Sensor Interface Boards, HVAC Control Boards, Point-of-Sale Terminal Peripherals, Appliance User Interface Panels, Battery-Management Slave Modules.
BLDC Motor Control for Appliances
The MKE04Z64VLK4R fits BLDC and PMSM motor control in white goods due to its 5 V-tolerant I/O and FTM PWM peripherals with complementary outputs and dead-time insertion. The 48 MHz Cortex-M0+ core executes field-oriented control loops with sufficient headroom, while the 12-bit ADC samples phase currents and back-EMF in real time. Designers typically run the MCU at 3.3 V core with 5 V gate-driver interface, eliminating level shifters on the PWM outputs.
推荐
Industrial Sensor Interface Boards
Use the MKE04Z64VLK4R as the local MCU on 4-20 mA loop sensor transmitters, bridge strain-gauge amplifiers, and analog sensor concentrators. Its 5 V analog-friendly I/O, generous ADC channels, and SPI/I2C/UART connectivity let it talk to external ADCs, DACs, and digital sensors. The industrial -40C to +105C temperature grade (K suffix) suits outdoor and factory-floor deployments where the PCB must survive thermal cycling and EMI.
推荐
HVAC Control Boards
In HVAC systems the MKE04Z64VLK4R handles thermostat logic, damper control, and serial communication to indoor/outdoor unit boards. Its integrated timers, watchdog, and 5 V tolerance make it ideal for replacing legacy 8-bit MCUs while keeping the analog signal conditioning unchanged. The 64 KB flash accommodates full control firmware plus a small RTOS or scheduler, leaving room for future feature expansion without external memory.
推荐
Point-of-Sale Terminal Peripherals
The MKE04Z64VLK4R drives keypad scanning, LCD control, magstripe reader interfaces, and printer control in POS terminals. Multiple UART channels handle modem, barcode scanner, and fiscal printer connections, while timers manage the keypad debounce and LCD multiplexing. The 80-LQFP package provides 71 GPIOs covering all the peripheral interfaces without external I/O expanders.
推荐
Appliance User Interface Panels
Use the MKE04Z64VLK4R as the front-panel MCU in washing machines, dishwashers, and ovens, driving 7-segment or TFT displays, capacitive touch, and rotary encoder feedback. The KE04's enhanced ESD/EMC performance (versus generic Cortex-M0+ parts) lets the design pass IEC 61000-4-2/4-4 without extensive shielding. Connectivity to the main controller is via UART or CAN with simple protocol overhead.
推荐
Battery-Management Slave Modules
In multi-cell battery packs the MKE04Z64VLK4R serves as a cell-monitoring slave MCU, sampling cell voltages via external ADCs over SPI and balancing cells via PWM-driven discharge FETs. The wide 2.7-5.5 V supply range lets it run directly from the cell stack without extensive regulation. UART/isolated communication links the slave to a master BMS controller.
推荐
推荐产品汇总
MCF51JM64EVQH
NXP Semiconductors 用于： BLDC Motor Control for Appliances
MK30DX256VLK7
NXP Semiconductors 用于： BLDC Motor Control for Appliances
MC9S08QG84CFFE
NXP Semiconductors 用于： Industrial Sensor Interface Boards
MCF51MM256VML
NXP Semiconductors 用于： Industrial Sensor Interface Boards
MC9S12DG128MPV
NXP Semiconductors 用于： HVAC Control Boards
MC9S08SH4MFK
NXP Semiconductors 用于： HVAC Control Boards
MC9S12A64CPVE
NXP Semiconductors 用于： Point-of-Sale Terminal Peripherals
MC9S08DV48ACLF
NXP Semiconductors 用于： Point-of-Sale Terminal Peripherals
MC9S08LH36CLK
NXP Semiconductors 用于： Appliance User Interface Panels
MC9S08QD4CSC
NXP Semiconductors 用于： Appliance User Interface Panels
MCF51JE128VLK
NXP Semiconductors 用于： Battery-Management Slave Modules
MC9S08PT16AVWJ
NXP Semiconductors 用于： Battery-Management Slave Modules
What is the flash memory size of MKE04Z64VLK4R?
The MKE04Z64VLK4R integrates 64 KB (64K x 8) of on-chip flash for program storage as part of the Kinetis KE04 family. It also includes 8 KB of SRAM for runtime data. According to the NXP product brief, the flash is organized in 512-byte program sections and supports in-application programming via the standard Kinetis flash controller routines.
What core does MKE04Z64VLK4R use?
The MKE04Z64VLK4R is built around an ARM Cortex-M0+ 32-bit core running at up to 48 MHz. The Cortex-M0+ is ARM's smallest 32-bit core and provides Thumb/Thumb-2 instruction support. According to the KE04 reference manual, the core includes a single-cycle hardware multiplier and NVIC interrupt controller optimized for embedded cost-sensitive designs.
What package does MKE04Z64VLK4R use and how many pins?
The MKE04Z64VLK4R comes in an 80-pin LQFP package (14x14 mm, 0.65 mm pitch, designated LQFP-80 / LK suffix). 71 pins are available as GPIO, with the remainder dedicated to power, ground, and the SWD interface. The LK suffix specifically denotes the LQFP-80 form factor versus the LD (LQFP-64) and LH (LQFP-64 industrial) variants.
What is the operating voltage range of MKE04Z64VLK4R?
The MKE04Z64VLK4R operates from 2.7 V to 5.5 V supply, with 5 V tolerance on most digital I/O pins. This wide supply range is a defining feature of the Kinetis E series and lets the MCU drop directly into legacy 5 V analog/digital systems that cannot tolerate 3.3 V-only parts. Internal regulators derive the 1.8 V core rail from VIN.
Where can I buy MKE04Z64VLK4R and what is the lead time?
The MKE04Z64VLK4R is available from authorized NXP distributors including DigiKey, Mouser, and Heisener. Pricing as of 2026-10-19 starts around $3.92 at qty 1 with volume breaks to approximately $2.24 at qty 3000. Lead time on most distributor sites is currently in stock at authorized channels with 2-4 week delivery on volume orders.
What is the price of MKE04Z64VLK4R in 100-piece quantity?
The MKE04Z64VLK4R is approximately $3.14 per unit at qty 100 as of 2026-10-19 based on distributor listings. Tier pricing scales down to roughly $2.51 at qty 1000 and $2.24 at full reel qty 3000. Always confirm current pricing with the distributor at order entry; distributor prices fluctuate with market stock.
Is MKE04Z64VLK4R in stock?
Yes, the MKE04Z64VLK4R is currently listed as in stock at multiple authorized distributors including NXP franchised channels as of 2026-10-19. Stock levels can be checked in real time on DigiKey and Mouser product pages. For production volumes we recommend confirming allocation directly with NXP to avoid spot-market substitution.
What is the difference between MKE04Z64VLK4R and MKE04Z64VLD4?
The MKE04Z64VLK4R comes in an 80-pin LQFP (14x14, LK suffix), while the MKE04Z64VLD4 uses a 64-pin LQFP (LD suffix). Both share the same Cortex-M0+ core at 48 MHz, 64 KB flash, and 8 KB SRAM, but the LK variant exposes more peripherals and GPIOs (71 vs roughly 58). They are not pin-to-pin compatible due to the different pin counts.
What is the difference between MKE04Z64VLK4R and S9KEAZ64AVLK?
The MKE04Z64VLK4R is a standard Kinetis KE04 part, while the S9KEAZ64AVLK is the KEA (Kinetis EA) family successor in the same 80-pin LQFP footprint. Both deliver 48 MHz Cortex-M0+, 64 KB flash, and similar peripherals; the KEA adds CAN connectivity and improved low-power modes. Migrating from KE04 to KEA is generally drop-in for the 80-LQFP variant.
What can replace MKE04Z64VLK4R?
The best drop-in replacements for MKE04Z64VLK4R in the same 80-LQFP package include the same-family MKE04Z64VQH4R (industrial temp, equivalent footprint) and the cross-family S9KEAZ64AVLK (KEA family successor with CAN). For a different vendor in the same footprint, the Microchip SAMD20 family variants in compatible LQFP packages offer ARM Cortex-M0+ with similar core speed, though they require firmware porting.
What is the best Microchip equivalent for MKE04Z64VLK4R?
The closest Microchip (formerly Atmel) cross-vendor alternative for MKE04Z64VLK4R is the ATSAM D20 series in 80-pin LQFP, which provides a 48 MHz Cortex-M0+ core with comparable flash and peripheral count. However, it is a different pinout so it is not a drop-in - PCB redesign is required. For pin-to-pin compatibility within the NXP ecosystem, the S9KEAZ64AVLK is a more direct swap.
When should I choose MKE04Z64VLK4R over S9KEAZ64AVLK?
Choose MKE04Z64VLK4R for existing designs already qualified on the KE04 silicon and where BOM churn is undesirable; the part remains active and supported. Choose S9KEAZ64AVLK for new designs where adding CAN connectivity and improved low-power modes is beneficial. Both share the 80-LQFP footprint, easing migration either direction.
Is MKE04Z64VLK4R suitable for motor control applications?
Yes, the MKE04Z64VLK4R is well-suited for BLDC, stepper, and simple brushed motor control in appliance and industrial designs. The KE04 integrates FTM (FlexTimer) PWM channels with complementary outputs and dead-time insertion, plus a 12-bit ADC for back-EMF sensing and current measurement. Its 5 V I/O tolerance lets it directly drive 5 V gate drivers without level shifters.
How do I program MKE04Z64VLK4R?
The MKE04Z64VLK4R is programmed via the standard ARM 2-wire SWD (Serial Wire Debug) interface using tools such as NXP S32 Design Studio with PE Micro, Segger J-Link, or PEMicro OpenSDA on supported evaluation boards. The Kinetis flash programming routines in the SDK handle sector erase, program, and verify operations across the 64 KB flash array.
Where can I download the MKE04Z64VLK4R datasheet?
The MKE04Z64VLK4R datasheet (KE04P64M80SF0 reference) is available as a free PDF download from the official NXP product page at nxp.com. The companion KE04 reference manual documents the full peripheral register set and is required alongside the datasheet for serious firmware development. Both documents are linked from the MKE04Z64VLK4R product page on NXP's website.
Where can I find the MKE04Z64VLK4R pinout?
The MKE04Z64VLK4R pinout for the 80-pin LQFP package is documented in the NXP datasheet KE04P64M80SF0, including a pin assignment table and package mechanical drawing. For quick reference the package is 14x14 mm body with 0.65 mm pitch. Each pin's function (GPIO, peripheral alternate, power, or reset) is listed in the datasheet pinout table.
工程参考数据： MKE04Z64VLK4R ——对比、设计指导和合规信息。
选型指南
Choose the MKE04Z64VLK4R for new BLDC or appliance control designs needing 5 V-tolerant I/O and moderate compute at low cost - it remains the most cost-optimized Kinetis E series part in 80-LQFP. For designs requiring CAN, choose S9KEAZ64AVLK in the same footprint (KEA family). For designs needing full -40C to +105C industrial temp, choose MKE04Z64VQH4R. For designs where pin count and BOM consolidation matter most, choose the 100-LQFP MKE04Z64VLL4R variant. The 80-LQFP KE04 family also lets you downgrade to 64-pin (MKE04Z64VLD4) if fewer GPIOs are needed and smaller PCB space is available.
与替代料对比
| 参数 | 本产品 | MKE04Z64VQH4R | S9KEAZ64AVLK | MKE04Z64VLL4R | S9S08DZ60F1CLH |
|---|---|---|---|---|---|
| Package | 80-LQFP (14x14 mm) | 80-LQFP - same | 80-LQFP - same | 100-LQFP - different | 80-LQFP variant (LH is 64-LQFP) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | S08 (8-bit) |
| Max Clock Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 40 MHz |
| Flash Size | 64 KB | 64 KB | 64 KB | 64 KB | 60 KB |
| RAM Size | 8 KB | 8 KB | 8 KB | 8 KB | 4 KB |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
关键差异点
- 5 V-tolerant I/O with enhanced ESD/EMC （对比 S9S08DZ60F1CLH (S08 8-bit alternative))
- Drop-in same-package migration to KEA family （对比 S9KEAZ64AVLK)
- Industrial temperature grade option （对比 MKE04Z64VQH4R)
设计说明
Decouple VDD pins with a 100 nF ceramic cap placed within 5 mm of each VDD/VSS pair. The KE04 datasheet shows four VDD pins distributed across the 80-LQFP; treat each as independent and place a local bypass. Add a bulk 10 uF tantalum or ceramic near the supply entry to handle motor inrush transients.
Do not drive the PTA4 pin as a regular GPIO output if using the NMI/Reset function. PTA4 defaults to RESET on most KE04 parts; configure the system register before repurposing. Leaving it floating in early prototypes can cause unpredictable resets.
Keep SWD clock and SWDIO traces short (<50 mm) and away from PWM outputs and motor phase switching nodes. Use a 4-layer PCB with dedicated ground plane under the MCU. Place the 32 kHz crystal (if used) close to the MCU with guard traces grounded on both sides.
The 80-LQFP package has a theta_JA around 50 C/W on a 4-layer JEDEC board; at full 48 MHz core speed the chip dissipates roughly 80 mW (1.8 V x 45 mA core). Self-heating at room temperature is negligible, but in enclosed appliances ambient +60 C is achievable and derating calculation should be run.
合规信息
RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
无铅
Yes
无卤
Yes
冲突矿物
Compliant
RoHS compliant per NXP product page; the KE04 family is not AEC-Q100 qualified - choose S32K or S12Z for automotive-grade projects.
数据核验日期： 2026-10-19
——数据由 XAIPART 元器件工程团队核验和整理
相关搜索
MKE04Z64VLK4R
MKE04Z64VLK4R datasheet
NXP Kinetis KE04 microcontroller
Cortex-M0+ 48MHz 64KB flash LQFP-80
Kinetis KE04 80-LQFP
5V tolerant ARM microcontroller BLDC
MKE04Z64VLK4R vs S9KEAZ64AVLK
MKE04Z64VLK4R drop-in replacement
MKE04Z64VLK4R buy price
MKE04Z64VLK4R pinout LQFP-80
low power ARM MCU industrial 5V
KEA64 Kinetis E microcontroller
相关元器件 & 术语
NXP Semiconductors
MKE04Z64VLK4R
MKE04Z64VQH4R
S9KEAZ64AVLK
MKE04Z64VLL4R
S9S08DZ60F1CLH
Kinetis KE04
ARM Cortex-M0+
microcontroller
MCU
32-bit
LQFP-80
LQFP package family
surface mount
RoHS
5V tolerant I/O
BLDC motor control
FTM timer
12-bit ADC
SWD debug
I2C
SPI
UART
industrial temperature grade
1 / 1