NXP Semiconductors

MKL14Z32VLK4 - 48MHz Cortex-M0+ 32KB MCU | NXP

MPN: MKL14Z32VLK4 ✓ Aktif
80-LQFP (12 x 12 mm) Package 48 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

MKL14Z32VLK4 Ringkasan

The NXP MKL14Z32VLK4 is a general-purpose 32-bit Kinetis KL1 microcontroller with a 48 MHz Arm Cortex-M0+ core, 32 KB of flash memory, and 4 KB of SRAM in an 80-LQFP package. It is designed for low-power embedded control, connected sensing, consumer accessories, and industrial systems that require efficient processing without a high-pin-count complex package.

A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, volatile data memory, and peripherals on one device. The MKL14Z32VLK4 belongs to the Kinetis KL1 family, whose hierarchy is Kinetis microcontroller, 32-bit microcontroller, Arm Cortex-M0+ MCU, and ultra-low-power embedded controller. This family is positioned for compact control systems that need more capability than a basic 8-bit device without the cost and complexity of a higher-end Cortex-M4 processor.

The device operates at up to 48 MHz and includes 32 KB of flash for firmware and 4 KB of SRAM for working data. Its 80-LQFP package exposes substantially more interface pins than small QFN devices, making it useful where external sensors, displays, communications, debug functions, or mixed-signal interfaces are required. The manufacturer identifies this exact orderable part as active, supporting design continuity for new embedded-product programs.

Kinetis KL1 devices provide a common family architecture and a migration path toward higher-end Kinetis families. This makes the MKL14Z32VLK4 appropriate for volume controllers in which deterministic low-power operation, conventional through-hole-package inspection, and ecosystem-compatible development practices are important. The large package also simplifies prototyping with accessible leads and reduces the need for fine-pitch assembly during board bring-up.

Typical uses include low-power sensor nodes, compact motor controllers, building-access peripherals, battery-powered data loggers, measurement instruments, and communication equipment. In these systems, the microcontroller executes real-time control logic, manages peripheral interrupts, and supports low-power states between active operations. Its 32-bit architecture and 48 MHz clock rate provide ample headroom for protocol handling and control algorithms while retaining a straightforward embedded profile.

PCB planning should preserve the 80-pin land pattern, power and decoupling requirements, clock configuration, and exposed programming or debug signals specified by the manufacturer datasheet. Check all alternate-function assignments and peripheral pin multiplexing before routing. Firmware should also account for the exact 32 KB flash and 4 KB SRAM limits, particularly when using bootloader space, logging, protocol buffers, or field-upgrade mechanisms.

This product page combines the exact electrical and memory characteristics, package information, lifecycle status, sourcing workflow, and engineering design guidance for the MKL14Z32VLK4. It also provides a structured comparison with related Kinetis KL1 choices and highlights the memory and peripheral trade-offs that determine whether a board revision can remain pin compatible.

Alternatif penggantian untuk MKL14Z32VLK4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MKL14Z32VLK4 (sama faktor bentuk dan footprint) — berbeda di dalam Product Type, Package, Architecture, Flash Memory, SRAM.

NXP Semiconductors
Product Type: 32-bit ultra-low-power microcontroller
Package: 80-pin LQFP, 12 x 12 mm
Architecture: 32-bit RISC
Bandingkan dengan MKL14Z32VLK4 →
NXP Semiconductors
Product Type: 32-bit ARM Cortex-M0+ microcontroller
Package: 80-LQFP, 12 mm x 12 mm
Bandingkan dengan MKL14Z32VLK4 →
NXP Semiconductors
Product Type: 32-bit RISC microcontroller
Architecture: 32-bit ARM RISC
Flash Memory: 64 KB (64K x 8)
Bandingkan dengan MKL14Z32VLK4 →

MKL14Z64VLK4

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
NXP Semiconductors
📦 80-LQFP (12 x 12 mm)
32-bit ultra-low-power microcontroller · NXP Semiconductors · Kinetis KL1 · Arm Cortex-M0+ · 48 MHz · 64 KB (64K x 8) · 8 KB · 1.71 V to 3.6 V

Kontak untuk harga

Lihat Datasheet →

MKL15Z32VLK4

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
NXP Semiconductors
📦 80-LQFP (12 x 12 mm)
32-bit ARM Cortex-M0+ microcontroller · 48 MHz · 32 KB (32K x 8) · 4 KB · Arm Cortex-M0+ · 32-bit ARM · USB device controller · Flexible clock options

Kontak untuk harga

Lihat Datasheet →

MKL15Z64VLK4

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
NXP Semiconductors
📦 80-LQFP (12 x 12 mm)
32-bit RISC microcontroller · ARM Cortex-M0+ · Kinetis KL1 · 48 MHz · 64 KB (64K x 8) · 1.8 V to 3.3 V · 1.8 V / 2.5 V / 3.3 V · 32-bit ARM RISC

Kontak untuk harga

Lihat Datasheet →

MKL16Z32VLK4

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 80-LQFP (12 x 12 mm)
Retains 32 KB flash but adds the Kinetis KL16 peripheral and memory feature set, creating firmware and resource-allocation differences.

📋 Alternatif referensi (tidak dalam katalog)

MKL17Z32VLK4

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 80-LQFP (12 x 12 mm)
Retains 32 KB flash while using the KL17 feature level with additional memory and peripheral resources in the same 80-LQFP footprint.

📋 Alternatif referensi (tidak dalam katalog)

MKL14Z32VLK4 Rating Maksimal & Karakteristik Listrik

Product Type 32-bit microcontroller
Product Family Kinetis KL1
Processor Core Arm Cortex-M0+
Architecture 32-bit
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB (32K x 8)
SRAM 4 KB
Paket 80-LQFP (12 x 12 mm)
Tipe Mounting Surface Mount
Product Category General-purpose ultra-low-power microcontroller
Status Lingkungan Hidup Active

MKL14Z32VLK4 80-lqfp (12 x 12 mm) Diamant Konfigurasi Panduan

Konfigurasi pin untuk MKL14Z32VLK4 (80-lqfp (12 x 12 mm) pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 80-lqfp (12 x 12 mm) untuk MKL14Z32VLK4

Tidak ada data diatribut pin yang tersedia untuk MKL14Z32VLK4.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MKL14Z32VLK4 cocok untuk 6 aplikasis: Battery-Powered Sensor Nodes, Building Automation and Access Control, Compact Motor and Actuator Control, Portable Measurement Instruments, Communication Equipment, Consumer Accessories and IoT Products.

🧩

Battery-Powered Sensor Nodes

The MKL14Z32VLK4 fits compact sensor nodes that periodically measure an environmental or physical quantity and return data through a low-power communications link. Its 48 MHz Arm Cortex-M0+ core provides ample control headroom, while 32 KB of flash holds the main application, configuration, and protocol routines. The 4 KB SRAM can support sampled values, packet buffers, and a modest sensor-processing workload. Designers should use the manufacturer’s low-power modes to structure the duty cycle, disable unused peripherals, and calculate battery life from complete active and sleep-state current rather than the 48 MHz core frequency alone.

🏭

Building Automation and Access Control

The MKL14Z32VLK4 is suitable for building-access terminals, environmental controllers, and occupancy-system peripherals that coordinate sensors, indicators, locks, and networked interfaces. Its 80-LQFP package provides numerous accessible pins for discrete inputs, outputs, communications, and programming signals, which simplifies prototype assembly compared with a very small leadless package. The 32-bit Cortex-M0+ architecture can execute state machines and communication tasks concurrently, but the 4 KB SRAM limit calls for disciplined buffers. Firmware should use events rather than blocking delays and verify every peripheral’s alternate-function mapping in the pin-description table.

🔧

Compact Motor and Actuator Control

The MKL14Z32VLK4 can serve as the supervisory controller in small motor, valve, pump, or actuator systems where position sensing, limit detection, timing, and communications share one controller. At up to 48 MHz, the Cortex-M0+ core can manage real-time control tasks and peripheral interrupts without an external processor. The 80-pin package makes signal routing accessible, while 32 KB of flash is suitable for a focused control application rather than a large graphical interface. Timing-critical loops should be benchmarked, and motor-driver isolation, protection, and grounding must be designed independently of the MCU.

📟

Portable Measurement Instruments

The MKL14Z32VLK4 fits portable meters and measurement instruments that combine sensor conditioning, display control, data logging, and a communications interface. Its 48 MHz processing speed supports responsive control and calibration routines, while the 32 KB flash budget is appropriate for compact firmware. The 80-LQFP package exposes enough pins for digital interfaces, analog-capable GPIO, programming signals, and discrete controls without forcing fine-pitch assembly during development. Designers should calculate ADC, reference, and front-end requirements separately, then reserve flash for calibration tables, bootloader, and communications without exceeding the available 4 KB SRAM.

🌐

Communication Equipment

The MKL14Z32VLK4 is appropriate for small communication endpoints, gateways, and protocol converters built around the Cortex-M0+ ecosystem. The processor can handle framing, state management, timers, and data movement, while the Kinetis family offers a structured path for adding peripherals as product complexity increases. Its 32 KB flash and 4 KB SRAM require careful allocation when combining a protocol stack with logging or a bootloader, so a KL14 64 KB variant may be preferable where firmware growth is expected. PCB routing should separate sensitive communications and clock paths from switching nodes and provide local decoupling at every supply pin.

📱

Consumer Accessories and IoT Products

The MKL14Z32VLK4 is well matched to smart accessories and IoT products that combine a user interface, local sensing, simple actuator control, and a low-power network interface. The general-purpose Kinetis KL1 architecture supports compact embedded logic, and the 80-LQFP package offers broad peripheral access for buttons, indicators, sensors, and debug programming. Its active manufacturer status supports ongoing product planning. Firmware development should include a bootloader strategy, field-update rollback, brownout handling, and a memory map that leaves room for protocol libraries and product configuration within the 32 KB flash and 4 KB SRAM limits.

What are the key specifications of MKL14Z32VLK4 that engineers should know?
The MKL14Z32VLK4 is an active 32-bit Kinetis KL1 microcontroller built around a 48 MHz Arm Cortex-M0+ core. It provides 32 KB of flash memory, 4 KB of SRAM, and an 80-LQFP package measuring 12 x 12 mm. According to the NXP product information and Kinetis KL1 datasheet material, its general-purpose, ultra-low-power positioning suits embedded control, connected sensing, and compact instrument designs where 32-bit processing, moderate memory, and ample external pin access are required.
What is the operating frequency of the MKL14Z32VLK4?
The MKL14Z32VLK4 operates at up to 48 MHz using its Arm Cortex-M0+ processor core. This clock rate gives embedded firmware enough execution capacity for real-time control, protocol handling, and moderate signal-processing tasks while retaining the power-efficient characteristics associated with the Kinetis KL1 family. The NXP product listing identifies the device as a 48 MHz Kinetis KL1 microcontroller; detailed clock-tree, divider, and power-mode settings should be configured according to the manufacturer datasheet.
How much memory does the MKL14Z32VLK4 have?
The MKL14Z32VLK4 contains 32 KB of flash memory and 4 KB of SRAM. Flash provides nonvolatile storage for firmware, configuration data, and constants, while SRAM supports stack operations, working variables, peripheral buffers, and real-time tasks. These figures are reported for the exact MKL14Z32VLK4 orderable part. Designers should reserve space for a bootloader and account for SRAM use by the chosen RTOS, communication stack, logging features, and application buffers.
What package does the MKL14Z32VLK4 use?
The MKL14Z32VLK4 uses an 80-LQFP package measuring 12 x 12 mm. The listing describes the package as 80-LQFP, while another product result identifies the same device as an 80-FQFP package, a common naming description for this leaded configuration. The manufacturer package drawing should govern land-pattern dimensions, pin numbering, exposed-pad treatment, solder mask, and assembly clearances. Use the 80-pin symbol and footprint from the official datasheet rather than a generic 64-pin or QFN footprint.
Where can I download the MKL14Z32VLK4 datasheet PDF?
The official MKL14Z32VLK4 datasheet can be reached through the NXP product page at https://www.nxp.com/part/MKL14Z32VLK4. That page identifies the part as active and provides the manufacturer Data Sheet link. The Kinetis KL1 family documentation covers the processor core, memory map, clocking, power management, peripherals, package characteristics, and programming model. Always select the document revision associated with MKL14Z32VLK4 when checking electrical limits or pin multiplexing.
Where can I find the MKL14Z32VLK4 pinout?
The MKL14Z32VLK4 pinout is published in the NXP Kinetis KL1 datasheet and its package drawing, with the official product page located at https://www.nxp.com/part/MKL14Z32VLK4. The device uses 80 leads, so the pinout must include all 80 positions and the package-specific pin-1 orientation. Use the manufacturer pin-description table when assigning multiplexed functions, programming signals, power pins, grounds, and analog peripherals to PCB tracks.
Where can I buy MKL14Z32VLK4 online and check its availability?
The MKL14Z32VLK4 can be requested through the “Request a Quote” form on this page, where the exact MPN, quantity, and delivery requirements can be reviewed. NXP identifies the component as active, and current distributor records report inventory. Availability and production volume can change, so submit the required quantity and target date rather than assuming that a displayed stock position will remain unchanged. XAIPART can confirm the exact suffix and packaging through the quote request.
What is the price of MKL14Z32VLK4?
The current commercial terms for the MKL14Z32VLK4 are shown through XAIPART’s “Request a Quote” form on this page. The exact price depends on order quantity, date of quotation, requested delivery schedule, and any applicable volume or channel terms. Because market pricing changes frequently, request a quote for the quantity and package suffix you need rather than relying on a static historical amount. The form avoids presenting an outdated price as current.
What is the lead time and minimum order quantity for MKL14Z32VLK4?
The lead time and minimum order quantity for MKL14Z32VLK4 should be confirmed through the “Request a Quote” form on this page. NXP lists the exact part as active, but production scheduling, allocation, and available finished-goods quantities can vary by order volume and requested date. Include your annual usage, forecast horizon, target delivery date, and permitted packaging in the request so procurement can confirm the appropriate schedule and commercial terms.
Is the MKL14Z32VLK4 in stock?
The MKL14Z32VLK4 has reported inventory, and NXP identifies the exact component as active. Current stock levels can change rapidly and may differ by distribution channel, so use the “Request a Quote” form on this page to request confirmation for your required quantity. State the desired delivery date and acceptable packaging in the request. This provides a direct answer for procurement while avoiding reliance on a transient inventory count.
What is the difference between MKL14Z32VLK4 and MKL16Z32VLH4?
The MKL14Z32VLK4 has 32 KB of flash, 4 KB of SRAM, and an 80-LQFP package, while the MKL16Z32VLH4 uses a 64-LQFP package and provides a different balance of memory and peripherals within the Kinetis family. The package difference is decisive: the 80-lead and 64-lead devices do not share the same PCB footprint, so MKL16Z32VLH4 is not a pin-for-pin replacement. Compare the exact pin counts, peripheral assignments, memory requirements, and software migration needs before changing the target MCU.
When should I choose MKL14Z32VLK4 instead of MKL15Z32VLK4?
Choose the MKL14Z32VLK4 when 32 KB of flash, 4 KB of SRAM, and the Kinetis KL1 feature set are sufficient and lower on-board memory demand is desirable. Choose an MKL15-family option only when its additional memory or peripherals provide a measured benefit that offsets the greater silicon and firmware-resource demand. Both devices use the same manufacturer ecosystem, but they remain distinct devices; confirm package pins, peripheral functions, clock features, and code footprint before treating either as a substitute.
Is MKL14Z32VLK4 suitable for battery-powered sensor nodes?
The MKL14Z32VLK4 is suitable for battery-powered sensor nodes when the design can operate within its 48 MHz Cortex-M0+ performance, 32 KB flash, 4 KB SRAM, and available low-power peripherals. Its Kinetis KL1 architecture is expressly positioned for ultra-low-power general-purpose applications. Use the datasheet power-mode specifications to estimate active and sleep current, and size the energy budget around the actual sensor, radio, and regulator loads rather than relying on processor current alone.
What can replace the MKL14Z32VLK4?
A true replacement for the MKL14Z32VLK4 must use the 80-LQFP footprint, preserve pin functions, and provide compatible power, clock, and programming connections. Related Kinetis KL1 devices such as the MKL14Z64VLK4 and MKL15Z32VLK4 can serve as same-family upgrade options when their memory and peripheral resources fit the design, but they may require firmware changes. The MKL14Z32VLH4 is not a drop-in replacement because it has 64 rather than 80 package leads.
What is the best NXP alternative to MKL14Z32VLK4 for a pin-compatible upgrade?
The MKL14Z64VLK4 is the closest same-brand, pin-compatible memory upgrade because it retains the 80-LQFP Kinetis KL1 hardware family while increasing flash from 32 KB to 64 KB, a 100% increase. It is suitable when code growth or a larger embedded application requires more program storage. Firmware must still be rebuilt and verified against the upgraded device, and engineers should confirm that all required peripherals remain available and that no software relies on the original part’s exact memory size.
What design checks are required before using MKL14Z32VLK4 on a new PCB?
Before using the MKL14Z32VLK4 on a new PCB, verify the 80-pin land pattern, power rails, decoupling, ground arrangement, clock configuration, boot mode, debugging interface, and every multiplexed peripheral connection against the manufacturer datasheet. The 32 KB flash and 4 KB SRAM also constrain bootloader, stack, RTOS, protocol, and logging allocations. A same-family device with the same package is not automatically a drop-in replacement because peripheral routing, memory, and firmware behavior may differ.

Data referensi engineering untuk MKL14Z32VLK4 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MKL14Z32VLK4 when the application needs a 48 MHz Arm Cortex-M0+ core, 32 KB of flash, 4 KB of SRAM, and the pin access offered by an 80-LQFP package. It is a strong fit for focused low-power controllers, sensor nodes, measurement products, and communication equipment where a larger leaded package simplifies prototyping but code size must remain controlled. Select MKL14Z64VLK4 when firmware growth requires 64 KB of flash without changing the 80-LQFP footprint. Choose an MKL15- or MKL16-family device only when its additional memory or peripherals solve a defined requirement, and accept the need to rebuild and validate firmware. Do not use the 64-lead MKL14Z32VLH4 as a direct PCB replacement. For any candidate, verify supply voltage, clock configuration, pin multiplexing, debug access, low-power behavior, and peripheral availability in the manufacturer datasheet before releasing the PCB.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MKL14Z64VLK4 MKL15Z32VLK4 MKL15Z64VLK4 MKL16Z32VLK4 MKL17Z32VLK4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm)
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Flash Memory 32 KB 64 KB 32 KB 64 KB 32 KB 32 KB
Product Family Kinetis KL1 Kinetis KL1 Kinetis KL1 Kinetis KL1 Kinetis KL1 Kinetis KL1
Architecture 32-bit 32-bit 32-bit 32-bit 32-bit 32-bit

Diferensiator Kunci

  • Lower flash demand within the same 80-LQFP Kinetis KL1 family (vsMKL14Z64VLK4)
  • Same package outline for family-level memory upgrades (vsMKL14Z64VLK4)
  • General-purpose Cortex-M0+ performance with broad package connectivity (vsMKL14Z32VLH4)
  • Higher-resource family options remain footprint-compatible (vsMKL15Z64VLK4)

Catatan Desain

Use the manufacturer’s 80-LQFP land pattern and pin-1 orientation exactly; do not substitute a generic LQFP footprint. Place the required bypass capacitors close to their associated supply pins and provide a low-impedance ground return beneath the device. Because the package exposes many pins, reserve individual programming and debug signals even when the initial application does not use them. A 12 x 12 mm leaded package is convenient for inspection and hand rework, but its fine lead pitch still requires suitable assembly magnification and land-pattern tolerances.

Design the power tree around the manufacturer’s operating-voltage limits, regulator tolerance, transient response, and startup sequence. Decouple each supply group locally and avoid routing high-current return paths through the MCU ground pins. The 48 MHz operating point is a maximum clock rate rather than a power target; choose clock, flash wait-state, and peripheral settings that match the workload. For battery applications, calculate average current from active time, sleep time, wake latency, sensor load, and radio behavior, then validate brownout behavior during supply transitions.

Follow the exact pin-description table for all peripheral assignments because many functions are multiplexed across alternate pins. Keep sensitive analog inputs away from switching nodes and high-speed return paths, and follow the recommended analog grounding topology. If an external crystal or oscillator is used, keep its route short, symmetrical, and surrounded by an appropriate ground guard. Debug and programming headers should be accessible after enclosure assembly, but test-point routing must not compromise high-speed signal integrity or the analog section.

Do not treat the 32 KB flash and 4 KB SRAM figures as scalable indefinitely. Check linker placement for a bootloader, vector table, stack, heap, RTOS, communications stack, calibration data, and logging buffers. When upgrading within the 80-LQFP Kinetis KL1 family, recompile the project and verify peripheral pin multiplexing, clock settings, interrupt vectors, and low-power behavior. A matching package count alone does not guarantee that an alternate MCU can replace the target without firmware or board changes.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

NXP identifies the MKL14Z32VLK4 as active, but no explicit environmental-compliance declarations were identified for this exact orderable part. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with the manufacturer or an authorized compliance document before qualification.

Data disahkan pada: 2026-11-14 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

MKL14Z32VLK4 datasheet MKL14Z32VLK4 pinout MKL14Z32VLK4 datasheet pdf NXP MKL14Z32VLK4 MKL14Z32VLK4 specifications MKL14Z32VLK4 48MHz Cortex-M0+ MKL14Z32VLK4 32KB flash MKL14Z32VLK4 80-LQFP MKL14Z32VLK4 equivalent MKL14Z32VLK4 replacement MKL14Z32VLK4 vs MKL14Z64VLK4 MKL14Z32VLK4 price MKL14Z32VLK4 stock MKL14Z32VLK4 low power MCU

Komponen dan Istilah Terkait

NXP Semiconductors MKL14Z32VLK4 MKL14Z64VLK4 MKL15Z32VLK4 MKL15Z64VLK4 MKL16Z32VLK4 MKL17Z32VLK4 MKL14Z32VLH4 Arm Cortex-M0+ Kinetis KL1 32-bit microcontroller microcontroller embedded controller ultra-low-power MCU semiconductor 80-LQFP LQFP surface-mount package 32 KB flash memory 4 KB SRAM 48 MHz clock sensor node building automation portable measurement instrument communication equipment
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ