Texas Instruments

MSP430F2122IPW - 16MHz, 4KB Flash Mixed-Signal MCU | Texas Instruments

MPN: MSP430F2122IPW ✓ Aktif
2.5V to 3.3V Vdss 28-pin TSSOP Package 16 MHz Speed 4KB Memory
MOQ: 1 |

MSP430F2122IPW Ringkasan

The Texas Instruments MSP430F2122IPW is a 16 MHz mixed-signal microcontroller with a 16-bit RISC CPU, 4KB Flash memory, 512B SRAM, a 10-bit ADC, comparator, and I2C, SPI, and UART interfaces, housed in a 28-pin TSSOP package. It is designed for compact embedded systems that need low power consumption, mixed-signal measurement, and serial connectivity in a single device.

A microcontroller is the central programmable component in an embedded control system, combining a processor core, memory, analog peripherals, digital interfaces, and power-management functions. The MSP430 family is positioned within the hierarchy of microcontrollers, embedded processors, and semiconductors. Its mixed-signal architecture allows an application to acquire analog measurements, compare sensor signals, and communicate with external equipment without requiring several separate devices.

The MSP430F2122IPW provides 16 MHz processing performance and a 16-bit RISC architecture with 16-bit registers and constant generators. Its 4KB Flash memory provides program storage, while 512B of SRAM supports working data, stack operations, and buffer management. Integrated peripherals include a 10-bit ADC, comparator, I2C, SPI, and UART, giving the device a practical mix of measurement, control, and communications functions for embedded designs.

The MSP430 platform is optimized for low-power operation and includes multiple low-power modes according to the manufacturer product information. The device can therefore remain responsive while reducing unnecessary activity in battery-powered instrumentation, portable measurement systems, and low-duty-cycle sensor products. The 28-pin TSSOP package is also suitable for compact through-hole PCB assembly and hand-soldered prototypes.

Typical uses include portable environmental monitoring, industrial sensor interfaces, low-power data loggers, battery-powered measurement instruments, and compact control systems requiring more than one serial interface. In these applications, the ADC and comparator support analog front-end processing while I2C, SPI, and UART provide connections to sensors, memory, host computers, or wireless modules.

When laying out the PCB, follow the manufacturer pin and package guidance, provide clean supply decoupling, and route analog inputs away from noisy switching nodes. Firmware should use the low-power modes and peripheral interrupt mechanisms to control energy use. When upgrading an existing design, verify the exact device suffix, package, memory size, and peripheral requirements before treating another MSP430 device as a replacement.

This product page combines the MSP430F2122 architecture, memory and interface specifications, application guidance, practical design notes, and qualified drop-in alternatives to support component selection and board-level implementation.

Alternatif penggantian untuk MSP430F2122IPW — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MSP430F2122IPW (sama faktor bentuk dan footprint) — berbeda di dalam Package, SRAM, CPU Architecture, Flash Memory, Low-Power Modes.

Texas Instruments
Package: 28-pin TSSOP (PW)
SRAM: 256 bytes
CPU Architecture: 16-bit RISC with 16-bit registers
Bandingkan dengan MSP430F2122IPW →
Texas Instruments
Package: 28-TSSOP (PW)
SRAM: 512 B
Flash Memory: 8 KB
Bandingkan dengan MSP430F2122IPW →

MSP430F2122IPWR

✅ Drop-In
📦 28-pin TSSOP
Same MSP430F2122 device and 28-pin TSSOP footprint; differs only in the orderable packing form.

📋 Alternatif referensi (tidak dalam katalog)

MSP430F2122TPWR

✅ Drop-In
📦 28-pin TSSOP
Same MSP430F2122 family, 16 MHz CPU, 4KB Flash, 512B SRAM, and 28-pin TSSOP package; ordering suffix identifies a different packing option.

📋 Alternatif referensi (tidak dalam katalog)

MSP430F2132IPW

✅ Drop-In
Texas Instruments
📦 28-pin TSSOP
16 MHz · 16-bit RISC · 16 bit · 8 KB · 512 B · 10 bit

Kontak untuk harga

Lihat Datasheet →

MSP430F123IPW

✅ Drop-In
Texas Instruments
📦 28-pin TSSOP
16-bit mixed-signal RISC microcontroller · 8 MHz · 8 KB · 256 bytes · 1.8 V to 3.6 V · 200 µA at 1 MHz and 2.2 V · 0.7 µA · 0.1 µA

Kontak untuk harga

Lihat Datasheet →

MSP430F1121IPW

✅ Drop-In
📦 28-pin TSSOP
MSP430 cross-reference candidate with the IPW package designation; lower memory and peripheral resources constrain replacement suitability.

📋 Alternatif referensi (tidak dalam katalog)

MSP430F2122IPW Rating Maksimal & Karakteristik Listrik

CPU Architecture 16-bit RISC
Frekuensi Bawah Maximum 16 MHz
Register Width 16 bit
Flash Memory 4KB
Flash Organization 4K x 8 bit plus 256B
SRAM 512B
ADC Resolution 10 bit
Comparator Integrated
Serial Interfaces I2C, SPI, UART
Tegangan Pemuat 2.5V to 3.3V
Paket 28-pin TSSOP
Tipe Mounting Through-hole
Device Family MSP430F2xx
Product Type Ultra-low-power mixed-signal microcontroller
Low-Power Modes Five low-power modes

MSP430F2122IPW 28-pin tssop Diamant Konfigurasi Panduan

Konfigurasi pin untuk MSP430F2122IPW (28-pin tssop pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 28-pin tssop untuk MSP430F2122IPW

Tidak ada data diatribut pin yang tersedia untuk MSP430F2122IPW.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MSP430F2122IPW cocok untuk 6 aplikasis: Portable Environmental Monitor, Industrial Sensor Interface, Battery-Powered Data Logger, Precision Control and Threshold Module, Low-Power Communication Endpoint, Compact Educational Development Platform.

🧩

Portable Environmental Monitor

The MSP430F2122IPW fits portable environmental monitors because it combines a 16 MHz 16-bit RISC CPU, 4KB Flash, 512B SRAM, and a 10-bit ADC in one device. The ADC can measure temperature, humidity, light, or gas-sensor outputs, while I2C or SPI can connect to external sensors without adding a separate interface controller. Five low-power modes support duty-cycled operation, helping the monitor spend more time in low-current states between samples. Firmware can use interrupt-driven acquisition, store readings in SRAM, and transmit results through UART, SPI, or I2C.

🏭

Industrial Sensor Interface

The MSP430F2122IPW is well suited to industrial sensor interfaces that require local measurement and serial communication. Its 10-bit ADC can acquire transducer outputs, and the integrated comparator can perform fast threshold detection for alarms or digital control functions. I2C and SPI provide flexible connections to sensors, analog-to-digital converters, and configuration memories, while UART supports a simple host or service interface. The 28-pin TSSOP package keeps the design compact, and the 16 MHz CPU allows timing, filtering, and protocol processing without a separate host processor.

📱

Battery-Powered Data Logger

The MSP430F2122IPW supports battery-powered data logging by combining low-power modes, local data acquisition, and serial output in a compact controller. The 10-bit ADC can sample slowly changing sensor channels at controlled intervals, while 512B of SRAM can hold a working buffer between transmissions. Its 4KB Flash supports application firmware, including acquisition scheduling, scaling, and packet formatting. The I2C interface can operate a real-time clock or external memory, while UART or SPI can move stored records to a host when the logging interval allows connectivity.

⚡

Precision Control and Threshold Module

The MSP430F2122IPW can serve as a compact control module when a design needs both analog comparison and programmable logic. Its integrated comparator supports threshold, window, or fast event detection, while the 10-bit ADC supplies a more detailed measurement when required. The 16-bit RISC CPU and 16 MHz clock can execute filtering, hysteresis, and control algorithms within the 4KB Flash and 512B SRAM limits. UART provides commissioning and diagnostics, while I2C or SPI allows the controller to update downstream devices or accept configuration commands.

🌐

Low-Power Communication Endpoint

The MSP430F2122IPW can act as the control endpoint beside a wireless or serial communications module. I2C and SPI are suitable for short-distance digital links to sensors and transceivers, while UART provides a straightforward command channel for modules with serial configuration interfaces. The MSP430F2xx mixed-signal feature set allows local sensor readings to be conditioned before transmission, reducing the need for additional interface electronics. Low-power modes can keep the endpoint inactive until a measurement, message, or scheduled event is required.

🔧

Compact Educational Development Platform

The MSP430F2122IPW is useful on a compact educational or prototype platform because one microcontroller provides a processor, analog conversion, comparison, and three serial interfaces. The 28-pin TSSOP package is straightforward to route on a perforated or through-hole training board. Its 16 MHz clock and 16-bit architecture simplify instruction-level examples, while 4KB Flash and 512B SRAM impose clear boundaries that help learners structure small projects. The ADC, comparator, and communication interfaces also support exercises covering sensing, control, interrupts, and serial protocols.

What are the key specifications of MSP430F2122IPW that engineers should know?
The MSP430F2122IPW combines a 16 MHz 16-bit RISC CPU, 4KB Flash, 512B SRAM, a 10-bit ADC, an integrated comparator, and I2C, SPI, and UART interfaces in a 28-pin TSSOP package. According to the Texas Instruments MSP430F2122 product page, the device is part of the MSP430F2xx family of ultra-low-power mixed-signal microcontrollers. The integrated memory, analog peripherals, and communications interfaces make it suitable for portable measurement, low-power sensing, data logging, and compact embedded-control products.
What is the operating voltage of MSP430F2122IPW?
The MSP430F2122IPW operates from 2.5V to 3.3V. According to the Texas Instruments MSP430F21x2 mixed-signal microcontroller datasheet, the MSP430 family combines a 16-bit RISC CPU with mixed-signal peripherals and low-power operating modes. Use the datasheet electrical-characteristics table to confirm voltage, current, and timing limits for the specific operating mode, and design the board power supply with suitable regulation and decoupling.
Where can I download the MSP430F2122IPW datasheet PDF?
The official MSP430F21x2 mixed-signal microcontroller datasheet is available from the Texas Instruments literature URL https://www.ti.com/lit/gpn/MSP430F2122. The manufacturer product page at https://www.ti.com/product/MSP430F2122 provides ordering information, device parameters, and related support material. Use the official datasheet for the complete pin description, electrical characteristics, timing requirements, programming information, and package drawings.
Where can I find the MSP430F2122IPW pinout?
The MSP430F2122IPW pinout is published in the pin-description section of the official Texas Instruments MSP430F21x2 datasheet. The device uses a 28-pin TSSOP package, so assign PCB nets directly from the manufacturer pin table rather than relying on a generic diagram. Confirm pin 1 orientation, supply pins, ground pins, test and reset functions, and analog or port multiplexing before routing the board.
How much memory does MSP430F2122IPW have?
The MSP430F2122IPW includes 4KB of Flash program memory and 512B of SRAM. Distributor technical listings identify the Flash organization as 4K x 8 bit plus 256B, while the Texas Instruments product page describes the device as having 4KB Flash and 512B SRAM. Confirm the complete memory map and reserved regions in the MSP430F21x2 datasheet before allocating code, constants, stack space, and runtime data.
What peripherals are integrated into MSP430F2122IPW?
The MSP430F2122IPW integrates a 10-bit ADC, comparator, I2C, SPI, and UART. According to the Texas Instruments product page, these functions support measurement and communication in a single mixed-signal device. The ADC can sample analog inputs, the comparator can support threshold decisions, and the serial interfaces can connect to sensors, memory, a host controller, or a communications module while conserving board area.
Is MSP430F2122IPW suitable for battery-powered measurement devices?
The MSP430F2122IPW is suitable for battery-powered measurement devices because the MSP430 platform is optimized for ultra-low-power operation and includes five low-power modes. The 16 MHz CPU provides useful processing capability without requiring a more complex external control system. Actual battery life depends on the selected operating mode, ADC sampling rate, serial-interface activity, standby duration, and leakage characteristics, so calculate the duty cycle using the manufacturer datasheet.
Where can I buy MSP430F2122IPW and check its current price?
Use the Request a Quote form on this page to request the current MSP430F2122IPW price, stock position, minimum order quantity, and lead time. The exact commercial terms can change with package form, order volume, and market conditions, so request an updated quotation for the precise MSP430F2122IPW order code. The manufacturer product page also provides ordering and part-detail resources for confirming package and device configuration.
What is the lead time for MSP430F2122IPW?
The current lead time for MSP430F2122IPW should be requested through the Request a Quote form on this page. Lead time depends on the exact package form, order quantity, and current manufacturing allocation, so it should not be inferred from a generic catalog page. Include the target quantity, shipment destination, and required production date when requesting the quotation.
Is MSP430F2122IPW in stock?
Use the Request a Quote form on this page for the current MSP430F2122IPW availability and stock allocation. Availability can differ between the tube and tape-and-reel order forms even though both use the same device family and electrical configuration. Provide the desired packaging and quantity in the request so the quotation can reflect the correct purchasable configuration.
What can replace MSP430F2122IPW?
The closest verified replacements are MSP430F2122IPWR and MSP430F2122TPWR, which use the same 28-pin TSSOP package and MSP430F2122 device family. A replacement should be selected only after checking flash, SRAM, peripheral, clock, and operating-mode requirements in the manufacturer documentation. Package fit alone does not prove firmware, timing, or mixed-signal feature compatibility.
Is MSP430F2122IPW the same as MSP430F2122TPWR?
The MSP430F2122IPW and MSP430F2122TPWR belong to the same MSP430F2122 family and use the same 28-pin TSSOP package, making them packaging alternatives for board fit. The principal ordering distinction is the supplied packing form, so the exact ordering information should be checked before substitution. The verified manufacturer documentation confirms the common device family and package, while the order code determines delivery format.
When should I choose MSP430F2122IPW instead of MSP430F2132IPW?
Choose MSP430F2122IPW when its 4KB Flash, 512B SRAM, 10-bit ADC, comparator, and I2C, SPI, and UART interfaces satisfy the design without requiring the additional resources associated with MSP430F2132IPW. The MSP430F2132IPW is identified in cross-reference material as a comparable MSP430 option, but its memory and peripheral configuration must be checked before substitution. Retain MSP430F2122IPW when its verified resource set is sufficient and established firmware depends on that configuration.
What is the best Texas Instruments equivalent for MSP430F2122IPW?
The best verified Texas Instruments package alternatives are MSP430F2122IPWR and MSP430F2122TPWR, both identified for the MSP430F2122 family in a 28-pin TSSOP configuration. They are preferable to an unrelated microcontroller when the existing PCB footprint must be retained. Their ordering forms differ, so select the required packing format and verify that the underlying electrical and memory specifications remain unchanged.
What design considerations matter when using MSP430F2122IPW?
The primary design considerations are power-supply decoupling, correct analog grounding, crystal or clock implementation, boot configuration, and firmware control of low-power modes. The MSP430F21x2 datasheet provides the authoritative pin assignments and application guidance. Keep sensitive analog inputs away from switching-node traces, use the recommended reset and test connections, and confirm the programmed device configuration before releasing a production design.

Data referensi engineering untuk MSP430F2122IPW — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose MSP430F2122IPW when the design requires a compact 16 MHz mixed-signal MCU with 4KB Flash, 512B SRAM, a 10-bit ADC, comparator, and I2C, SPI, and UART interfaces. MSP430F2122IPWR or MSP430F2122TPWR are preferred when the same electrical device and 28-pin TSSOP footprint are needed in a different orderable packing form. Consider MSP430F2132IPW only after confirming that its additional resources are useful and that its register, memory, and peripheral configuration remain compatible with the firmware. MSP430F123IPW and MSP430F1121IPW should be treated as MSP430 alternatives requiring explicit resource review rather than automatic replacements. For production designs, confirm operating temperature, lifecycle status, package details, programming method, and all pin functions against the current manufacturer documentation before releasing the PCB.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MSP430F2122IPWR MSP430F2122TPWR MSP430F2132IPW MSP430F123IPW MSP430F1121IPW
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments

Diferensiator Kunci

  • Combines mixed-signal conversion and three serial interfaces in one MCU (vsMSP430F123IPW)
  • Direct ordering-family alternatives preserve the established 28-pin TSSOP layout (vsMSP430F2122TPWR)
  • Higher CPU clock supports more responsive mixed-signal control (vsMSP430F1121IPW)

Catatan Desain

Place the supply bypass capacitor close to the device's supply and ground pins, and route the return path to the quiet ground reference to limit switching-induced voltage excursions. The MSP430F21x2 datasheet is the authority for pin selection, decoupling values, and allowable supply combinations. Keep analog sensor returns separate from digital return currents where practical, and verify the regulator's behavior during startup and low-power transitions.

Use the manufacturer pin-description and package drawings when assigning the 28-pin TSSOP footprint, especially for supply, reset, test, and multiplexed port functions. Keep oscillator and timing circuits close to their assigned pins, avoid routing analog inputs beneath or parallel to high-current digital nets, and provide adequate clearance around exposed assembly tooling if the board is intended for repeated programming or rework.

Do not treat a shared package as proof of complete drop-in compatibility. For MSP430F2122IPW alternatives, check the exact memory capacity, ADC channels, comparator configuration, serial-interface availability, clock requirements, interrupt vectors, and low-power behavior in the manufacturer documentation. Existing firmware may require linker, startup, timing, and peripheral-register changes even when the PCB land pattern remains unchanged.

For analog measurements, connect the sensor signal close to the ADC input through a source impedance that meets the sampling requirements in the datasheet. Add filtering where needed, but include the resulting settling time in the acquisition timing. The comparator inputs and ADC channels may be multiplexed, so firmware should configure the correct pins and account for switching latency rather than assuming simultaneous sampling.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No explicit compliance status for the exact MSP430F2122IPW ordering code appears in the manufacturer product information or official datasheet excerpts. The datasheet references JEDEC J-STD-020 for reflow classification, but that reference does not establish RoHS, REACH, or AEC-Q100 status.

Data disahkan pada: 2026-11-15 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

MSP430F2122IPW datasheet MSP430F2122IPW datasheet pdf MSP430F2122IPW pinout MSP430F2122IPW specifications Texas Instruments MSP430F2122IPW MSP430F2122IPW price MSP430F2122IPW stock MSP430F2122IPW equivalent MSP430F2122IPW replacement MSP430F2122IPW vs MSP430F2132IPW MSP430F2122IPW vs MSP430F123IPW MSP430F2122IPW footprint MSP430F2122 28-TSSOP pinout MSP430F2122IPW application circuit

Komponen dan Istilah Terkait

Texas Instruments MSP430F2122IPW MSP430F2122IPWR MSP430F2122TPWR MSP430F2132IPW MSP430F123IPW MSP430F1121IPW MSP430 MSP430F2xx microcontroller mixed-signal microcontroller embedded processor 16-bit RISC CPU 10-bit ADC comparator I2C SPI UART 4KB Flash 512B SRAM 28-pin TSSOP TSSOP package family surface-mount package low-power modes JEDEC J-STD-020
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ