MSP430F2122IPW - 16MHz, 4KB Flash Mixed-Signal MCU | Texas Instruments
MPN: MSP430F2122IPW ✓ 啟用中MSP430F2122IPW 概覽
A microcontroller is the central programmable component in an embedded control system, combining a processor core, memory, analog peripherals, digital interfaces, and power-management functions. The MSP430 family is positioned within the hierarchy of microcontrollers, embedded processors, and semiconductors. Its mixed-signal architecture allows an application to acquire analog measurements, compare sensor signals, and communicate with external equipment without requiring several separate devices.
The MSP430F2122IPW provides 16 MHz processing performance and a 16-bit RISC architecture with 16-bit registers and constant generators. Its 4KB Flash memory provides program storage, while 512B of SRAM supports working data, stack operations, and buffer management. Integrated peripherals include a 10-bit ADC, comparator, I2C, SPI, and UART, giving the device a practical mix of measurement, control, and communications functions for embedded designs.
The MSP430 platform is optimized for low-power operation and includes multiple low-power modes according to the manufacturer product information. The device can therefore remain responsive while reducing unnecessary activity in battery-powered instrumentation, portable measurement systems, and low-duty-cycle sensor products. The 28-pin TSSOP package is also suitable for compact through-hole PCB assembly and hand-soldered prototypes.
Typical uses include portable environmental monitoring, industrial sensor interfaces, low-power data loggers, battery-powered measurement instruments, and compact control systems requiring more than one serial interface. In these applications, the ADC and comparator support analog front-end processing while I2C, SPI, and UART provide connections to sensors, memory, host computers, or wireless modules.
When laying out the PCB, follow the manufacturer pin and package guidance, provide clean supply decoupling, and route analog inputs away from noisy switching nodes. Firmware should use the low-power modes and peripheral interrupt mechanisms to control energy use. When upgrading an existing design, verify the exact device suffix, package, memory size, and peripheral requirements before treating another MSP430 device as a replacement.
This product page combines the MSP430F2122 architecture, memory and interface specifications, application guidance, practical design notes, and qualified drop-in alternatives to support component selection and board-level implementation.
直接替換替代品,適用於 MSP430F2122IPW — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MSP430F2122IPW (相同外形與佔位) — 差異在於 Package, SRAM, CPU Architecture, Flash Memory, Low-Power Modes.
MSP430F2122IPWR
✅ 直接替換📋 參考替代品(不在目錄中)
MSP430F2122TPWR
✅ 直接替換📋 參考替代品(不在目錄中)
MSP430F2132IPW
✅ 直接替換聯絡詢價
查看資料表 →MSP430F123IPW
✅ 直接替換聯絡詢價
查看資料表 →MSP430F1121IPW
✅ 直接替換📋 參考替代品(不在目錄中)
MSP430F2122IPW 最大額定值與電氣特性
| CPU Architecture | 16-bit RISC |
| 最大時脈頻率 | 16 MHz |
| Register Width | 16 bit |
| Flash Memory | 4KB |
| Flash Organization | 4K x 8 bit plus 256B |
| SRAM | 512B |
| ADC Resolution | 10 bit |
| Comparator | Integrated |
| Serial Interfaces | I2C, SPI, UART |
| 供應電壓 | 2.5V to 3.3V |
| 封裝 | 28-pin TSSOP |
| 安裝類型 | Through-hole |
| Device Family | MSP430F2xx |
| Product Type | Ultra-low-power mixed-signal microcontroller |
| Low-Power Modes | Five low-power modes |
MSP430F2122IPW 28-pin tssop 腳位配置指南
MSP430F2122IPW(28-pin tssop 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MSP430F2122IPW.
請參閱 資料表 以查看完整腳位配置。
典型應用
MSP430F2122IPW 適用於 6 應用s: Portable Environmental Monitor, Industrial Sensor Interface, Battery-Powered Data Logger, Precision Control and Threshold Module, Low-Power Communication Endpoint, Compact Educational Development Platform.
Portable Environmental Monitor
The MSP430F2122IPW fits portable environmental monitors because it combines a 16 MHz 16-bit RISC CPU, 4KB Flash, 512B SRAM, and a 10-bit ADC in one device. The ADC can measure temperature, humidity, light, or gas-sensor outputs, while I2C or SPI can connect to external sensors without adding a separate interface controller. Five low-power modes support duty-cycled operation, helping the monitor spend more time in low-current states between samples. Firmware can use interrupt-driven acquisition, store readings in SRAM, and transmit results through UART, SPI, or I2C.
推薦
Industrial Sensor Interface
The MSP430F2122IPW is well suited to industrial sensor interfaces that require local measurement and serial communication. Its 10-bit ADC can acquire transducer outputs, and the integrated comparator can perform fast threshold detection for alarms or digital control functions. I2C and SPI provide flexible connections to sensors, analog-to-digital converters, and configuration memories, while UART supports a simple host or service interface. The 28-pin TSSOP package keeps the design compact, and the 16 MHz CPU allows timing, filtering, and protocol processing without a separate host processor.
推薦
Battery-Powered Data Logger
The MSP430F2122IPW supports battery-powered data logging by combining low-power modes, local data acquisition, and serial output in a compact controller. The 10-bit ADC can sample slowly changing sensor channels at controlled intervals, while 512B of SRAM can hold a working buffer between transmissions. Its 4KB Flash supports application firmware, including acquisition scheduling, scaling, and packet formatting. The I2C interface can operate a real-time clock or external memory, while UART or SPI can move stored records to a host when the logging interval allows connectivity.
推薦
Precision Control and Threshold Module
The MSP430F2122IPW can serve as a compact control module when a design needs both analog comparison and programmable logic. Its integrated comparator supports threshold, window, or fast event detection, while the 10-bit ADC supplies a more detailed measurement when required. The 16-bit RISC CPU and 16 MHz clock can execute filtering, hysteresis, and control algorithms within the 4KB Flash and 512B SRAM limits. UART provides commissioning and diagnostics, while I2C or SPI allows the controller to update downstream devices or accept configuration commands.
推薦
Low-Power Communication Endpoint
The MSP430F2122IPW can act as the control endpoint beside a wireless or serial communications module. I2C and SPI are suitable for short-distance digital links to sensors and transceivers, while UART provides a straightforward command channel for modules with serial configuration interfaces. The MSP430F2xx mixed-signal feature set allows local sensor readings to be conditioned before transmission, reducing the need for additional interface electronics. Low-power modes can keep the endpoint inactive until a measurement, message, or scheduled event is required.
推薦
Compact Educational Development Platform
The MSP430F2122IPW is useful on a compact educational or prototype platform because one microcontroller provides a processor, analog conversion, comparison, and three serial interfaces. The 28-pin TSSOP package is straightforward to route on a perforated or through-hole training board. Its 16 MHz clock and 16-bit architecture simplify instruction-level examples, while 4KB Flash and 512B SRAM impose clear boundaries that help learners structure small projects. The ADC, comparator, and communication interfaces also support exercises covering sensing, control, interrupts, and serial protocols.
推薦
推薦產品摘要
工程參考資料,適用於 MSP430F2122IPW — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MSP430F2122IPWR | MSP430F2122TPWR | MSP430F2132IPW | MSP430F123IPW | MSP430F1121IPW |
|---|---|---|---|---|---|---|
| Package | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
主要差異化特點
- Combines mixed-signal conversion and three serial interfaces in one MCU (對比MSP430F123IPW)
- Direct ordering-family alternatives preserve the established 28-pin TSSOP layout (對比MSP430F2122TPWR)
- Higher CPU clock supports more responsive mixed-signal control (對比MSP430F1121IPW)
設計說明
Place the supply bypass capacitor close to the device's supply and ground pins, and route the return path to the quiet ground reference to limit switching-induced voltage excursions. The MSP430F21x2 datasheet is the authority for pin selection, decoupling values, and allowable supply combinations. Keep analog sensor returns separate from digital return currents where practical, and verify the regulator's behavior during startup and low-power transitions.
Use the manufacturer pin-description and package drawings when assigning the 28-pin TSSOP footprint, especially for supply, reset, test, and multiplexed port functions. Keep oscillator and timing circuits close to their assigned pins, avoid routing analog inputs beneath or parallel to high-current digital nets, and provide adequate clearance around exposed assembly tooling if the board is intended for repeated programming or rework.
Do not treat a shared package as proof of complete drop-in compatibility. For MSP430F2122IPW alternatives, check the exact memory capacity, ADC channels, comparator configuration, serial-interface availability, clock requirements, interrupt vectors, and low-power behavior in the manufacturer documentation. Existing firmware may require linker, startup, timing, and peripheral-register changes even when the PCB land pattern remains unchanged.
For analog measurements, connect the sensor signal close to the ADC input through a source impedance that meets the sampling requirements in the datasheet. Add filtering where needed, but include the resulting settling time in the acquisition timing. The comparator inputs and ADC channels may be multiplexed, so firmware should configure the correct pins and account for switching latency rather than assuming simultaneous sampling.
合規資訊
No explicit compliance status for the exact MSP430F2122IPW ordering code appears in the manufacturer product information or official datasheet excerpts. The datasheet references JEDEC J-STD-020 for reflow classification, but that reference does not establish RoHS, REACH, or AEC-Q100 status.