Texas Instruments

MSP430F4371IPN - 8MHz 16-Bit MCU with 32KB Flash | TI

MPN: MSP430F4371IPN ✓ Aktif
80-pin LQFP (PN), 12 mm x 12 mm Package 8 MHz Speed 32 KB Memory
MOQ: 1 |

MSP430F4371IPN Ringkasan

The Texas Instruments MSP430F4371IPN is an 8 MHz, 16-bit mixed-signal microcontroller with 32 KB of Flash memory, 1 KB of SRAM, a comparator, SPI/UART communications, and support for a 160-segment LCD in an 80-pin LQFP package. It combines the MSP430 RISC architecture with low-power operation and mixed-signal peripherals for embedded control, measurement, communications, and human-interface applications.

An ultra-low-power mixed-signal microcontroller is a semiconductor device that integrates a CPU, memory, analog functions, and communication peripherals into one compact component. The MSP430 architecture uses 16-bit registers and constant generators to support efficient embedded software execution, while its low-power modes are intended to extend battery life in systems that spend substantial time asleep.

The MSP430F4371IPN operates at up to 8 MHz and includes 32 KB of Flash for program storage plus 1 KB of SRAM for data. Its integrated comparator supports basic analog threshold and signal-conditioning tasks, while SPI and UART interfaces enable connection to sensors, displays, transceivers, and data-acquisition equipment. A 160-segment LCD capability can also reduce the need for separate display-driver circuitry in segmented-panel designs.

The device belongs to the MSP430x43x mixed-signal family and uses the MSP430 CPU16 architecture. Its combination of 16-bit processing, Flash memory, SRAM, comparator resources, serial interfaces, and LCD support is useful where designers want one controller to handle both control logic and local human-interface functions. The 80-pin LQFP (PN) package provides substantially more I/O and peripheral connectivity than the smaller MSP430 devices intended for compact, low-pin-count designs.

Typical applications include industrial panel controls, portable measurement instruments, low-power sensor nodes, data loggers, building-control modules, and compact serial-interface equipment. In a measurement product, the comparator can support fast threshold detection while the CPU handles control, calibration, and communications. SPI can connect to higher-bandwidth sensors or memory, while UART provides a simple interface for configuration and diagnostics.

Designers should assign pins from the manufacturer pin-description table and verify the complete pin multiplexing, LCD-segment mapping, and peripheral-instance assignments for the selected firmware. The 80-LQFP layout also requires careful examination of exposed-pad, thermal, and board-routing requirements where those are specified for the package. Software configuration must account for the shared analog and digital peripheral resources rather than assuming every function is simultaneously available.

This page combines the exact device identity, package, memory, interface, and temperature information with focused replacement guidance and engineering-oriented selection notes. It also distinguishes electrically similar MSP430 family members from confirmed drop-in choices, helping engineers assess PCB compatibility, firmware implications, and application suitability before committing to a replacement.

Alternatif penggantian untuk MSP430F4371IPN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MSP430F4371IPN (sama faktor bentuk dan footprint) — berbeda di dalam Flash Memory, CPU Architecture, Comparator, Operating Temperature, Package.

Texas Instruments
Flash Memory: 16 KB
CPU Architecture: 16-bit RISC
Package: 80-pin LQFP (PN), 12 mm × 12 mm
Bandingkan dengan MSP430F4371IPN →
Texas Instruments
Flash Memory: 24 KB
CPU Architecture: 16-bit MSP430 RISC
Bandingkan dengan MSP430F4371IPN →
Texas Instruments
Flash Memory: 32 KB (32K x 8 plus 256 B)
Comparator: 1 integrated comparator
Operating Temperature: -40°C to 85°C
Bandingkan dengan MSP430F4371IPN →

MSP430F435IPN

✅ Drop-In
Texas Instruments
📦 80-pin LQFP (PN), 12 mm x 12 mm
16-bit RISC · 8 MHz · 16 KB · 512 B · 12 bit · Integrated · SPI and UART · 160 segments

Kontak untuk harga

Lihat Datasheet →

MSP430F436IPN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 80-pin LQFP (PN), 12 mm x 12 mm
16-bit MSP430 RISC · 8 MHz · 24 KB · 256 bytes · 1 KB · 12-bit · Integrated · SPI and UART

Kontak untuk harga

Lihat Datasheet →

MSP430F4376IPN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 80-pin LQFP (PN), 12 mm x 12 mm
Same 80-pin LQFP (PN) footprint and MSP430x43x architecture, while LCD-segment count and selected peripheral assignments differ from the 160-segment MSP430F4371IPN configuration.

📋 Alternatif referensi (tidak dalam katalog)

MSP430F4377IPN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 80-pin LQFP (PN), 12 mm x 12 mm
Same 80-pin LQFP (PN) footprint and MSP430x43x family, with lower memory and LCD-resource differences relative to the 32 KB Flash and 160-segment target configuration.

📋 Alternatif referensi (tidak dalam katalog)

MSP430F4371IPN Rating Maksimal & Karakteristik Listrik

Product Type 16-bit ultra-low-power mixed-signal microcontroller
CPU Architecture MSP430 CPU16
Frekuensi Bawah Maximum 8 MHz
Word Size 16 bit
Flash Memory 32 KB
SRAM 1 KB
Additional Flash Detail 256 byte
Comparator Integrated
SPI Interface Integrated
UART Interface Integrated
LCD Segment Support 160 segments
Paket 80-pin LQFP (PN), 12 mm x 12 mm
Tipe Mounting Surface mount
Suhu Kerja -40 °C to +85 °C
Product Category Mixed-signal microcontroller

MSP430F4371IPN 80-pin lqfp (pn), 12 mm x 12 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk MSP430F4371IPN (80-pin lqfp (pn), 12 mm x 12 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 80-pin lqfp (pn), 12 mm x 12 mm untuk MSP430F4371IPN

Tidak ada data diatribut pin yang tersedia untuk MSP430F4371IPN.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MSP430F4371IPN cocok untuk 6 aplikasis: Industrial LCD Control Panel, Portable Data Logger, Battery-Powered Sensor Node, Serial Measurement Instrument, Building Control Module, Configuration and Diagnostics Interface.

🏭

Industrial LCD Control Panel

The MSP430F4371IPN fits industrial panel designs that require substantial display capability and local control in one controller. Its support for 160 LCD segments can drive a segmented status display while the 16-bit MSP430 CPU handles button logic, alarms, configuration, and supervisory tasks. The 80-pin LQFP (PN) package provides a substantial I/O budget for keys, indicator control, communication, and discrete sensing. With 32 KB of Flash and 1 KB of SRAM, the device can host application code and working data for a dedicated panel controller. Engineers should map segment outputs directly from the manufacturer LCD tables and reserve pins for required peripherals before committing the board layout.

🧩

Portable Data Logger

The MSP430F4371IPN is suitable for a portable logger combining an 8 MHz control core, 32 KB Flash, and 1 KB SRAM with low-power MSP430 operation. The CPU can coordinate sensor acquisition, timestamps, local status indication, and serial data transfer, while SPI provides a path to higher-speed sensors or storage and UART supports configuration or synchronization. Battery-operated operation makes low-power mode selection, interrupt-driven sampling, and peripheral shutdown behavior central to the design. The 80-pin LQFP package also leaves enough external connectivity for sensors, a battery monitor, and protection circuitry. Validate worst-case memory usage and wake-up behavior in the intended firmware configuration.

🔋

Battery-Powered Sensor Node

The MSP430F4371IPN can serve as the local controller in a battery-powered sensor node that needs more serial connectivity and display flexibility than a minimal MSP430 design. Its integrated comparator supports fast threshold or signal-change detection, the 8 MHz CPU performs acquisition logic, and SPI or UART connects the node to sensors and an external radio. The 32 KB Flash provides room for protocol and application code, while 1 KB SRAM accommodates active buffers and stack requirements. Because the MCU alone does not determine total battery life, the system designer should minimize peripheral run time and use event-driven wake-up behavior. The 80-pin LQFP footprint is helpful when multiple sensing and communication lines are required.

📟

Serial Measurement Instrument

The MSP430F4371IPN is appropriate for a compact measurement instrument that combines acquisition control with a local readout and serial data exchange. The comparator provides a basic analog comparison function, SPI can connect to precision converters or sensors, and UART can carry commands, results, and diagnostics. Its 16-bit CPU and 32 KB Flash support structured control software, while 1 KB SRAM is suitable for modest working sets and buffered results. A segmented LCD can present operating state without adding a dedicated display controller. In implementation, verify comparator input ranges, ADC needs, peripheral multiplexing, and timing against the manufacturer electrical tables. The 80-pin package offers ample connectivity for analog conditioning and user-interface signals.

🏠

Building Control Module

The MSP430F4371IPN can act as a low-power building-control module when a design combines distributed sensing with local status display and serial connectivity. Its 160-segment LCD capability can drive zone indicators or a service display, while comparator inputs can provide threshold detection for simple analog conditions. SPI and UART permit connection to environmental sensors, gateways, and service interfaces, and the 32 KB Flash provides sufficient storage for structured control logic. The 80-pin LQFP (PN) package simplifies access to a broad set of I/O resources for switches, indicators, and interconnects. Designers should define power states carefully to avoid unnecessary peripheral current and confirm that the LCD and communication interfaces can operate concurrently in the selected device configuration.

🖥️

Configuration and Diagnostics Interface

The MSP430F4371IPN works well as a configuration and diagnostics interface for an embedded product that needs more processing and display resources than a basic serial bridge. Its 8 MHz MSP430 CPU can manage menus, status pages, input handling, logs, and command processing, while UART provides a direct host interface and SPI supports local expansion. The integrated 160-segment LCD capability can show operating modes, diagnostics, and calibration information without a separate display MCU. With 32 KB Flash and 1 KB SRAM, application organization should account for code growth, communication buffers, and stack depth. The 80-pin package leaves ample pins for buttons, indicators, and expansion buses, but every alternate peripheral function must be checked against the manufacturer pin-mux rules.

What are the key specifications of MSP430F4371IPN that engineers should know?
The MSP430F4371IPN is an 8 MHz, 16-bit mixed-signal MCU with 32 KB of Flash, 1 KB of SRAM, an integrated comparator, SPI, UART, and support for up to 160 LCD segments. According to the Texas Instruments product page and manufacturer datasheet, it is packaged in an 80-pin LQFP (PN) measuring 12 mm by 12 mm and rated for -40 °C to +85 °C. These figures position the device between small low-pin-count MSP430 controllers and larger MCU packages requiring substantially more external connectivity.
What is the operating voltage of MSP430F4371IPN?
The MSP430F4371IPN operates from the supply voltage range defined for the MSP430x43x family in the Texas Instruments manufacturer datasheet. The exact minimum, maximum, and recommended operating voltages are marked as [DATA_NEEDED: operating voltage range]. Before connecting external sensors or display circuitry, confirm the selected supply voltage against the device's power architecture and I/O voltage limits in the pin and electrical-characteristics tables.
Where can I download the MSP430F4371IPN datasheet PDF?
The official MSP430F4371 datasheet and supporting documentation are available from the Texas Instruments product page at https://www.ti.com/product/MSP430F4371. The manufacturer identifies the document as the MSP430x43x, MSP430x43x1, and MSP430x44x mixed-signal microcontroller datasheet, revision G. Use its pin-description table, memory map, LCD-segment tables, and electrical-characteristics sections when finalizing the PCB and firmware.
Where can I find the MSP430F4371IPN pinout?
The MSP430F4371IPN pinout is documented in the Texas Instruments MSP430x43x family datasheet and its package drawing for the 80-pin LQFP (PN). The device has 80 pins and includes mixed-signal, LCD, communication, clock, power, and ground resources according to the package configuration. Because the complete pin-number map is not reproduced in the product summary, use the manufacturer pin-description table when assigning PCB tracks rather than inferring function from neighboring pins.
How much Flash memory and SRAM does MSP430F4371IPN have?
The MSP430F4371IPN provides 32 KB of Flash memory and 1 KB of SRAM. The distributor listing also identifies 256 bytes of additional Flash detail, corresponding to the separate memory information shown in the device description. According to the Texas Instruments product page, the 32 KB Flash region is intended primarily for program storage, while the 1 KB SRAM supports runtime variables, stacks, buffers, and peripheral data handling.
Is MSP430F4371IPN suitable for low-power embedded systems?
Yes, the MSP430F4371IPN is suitable for low-power embedded systems because it is an MSP430 ultra-low-power mixed-signal MCU designed around a 16-bit RISC CPU and low-power operating modes. Its 8 MHz clock, 32 KB Flash, and 1 KB SRAM are suitable for control, monitoring, and serial communications. Actual battery life depends on the selected clock settings, active peripherals, interrupt behavior, sleep duration, and the power consumed by sensors and display circuitry.
What can replace the MSP430F4371IPN on an existing PCB?
The closest candidate identified for an existing MSP430F4371IPN design is the MSP430F435IPN because it uses the same 80-pin LQFP (PN) family package and is specifically presented in comparison data for this device. A mechanical footprint match does not guarantee firmware interchangeability. Before replacing the MCU, compare memory capacity, LCD-segment mapping, analog-channel assignments, serial peripheral instances, interrupt vectors, and device-specific pin multiplexing in the manufacturer datasheets.
MSP430F4371IPN vs MSP430F435IPN — which is better for an LCD control panel?
The MSP430F4371IPN is the stronger choice when a design requires its stated 160-segment LCD support, 32 KB Flash, and 1 KB SRAM. The MSP430F435IPN is worth examining for an existing 80-pin LQFP (PN) board because comparison data identifies it as a closely related family member. The final choice should follow a complete review of the LCD mapping, memory use, peripheral resources, and required firmware changes rather than package compatibility alone.
When should I choose MSP430F4371IPN over MSP430F436IPN?
Choose the MSP430F4371IPN when the design specifically benefits from its stated 160-segment LCD capability and its documented combination of 32 KB Flash and 1 KB SRAM. Consider the MSP430F436IPN only after confirming that its available LCD, analog, memory, and communication resources satisfy the product requirements. Because both devices belong to the same MSP430 family, software organization can often be reused, but peripheral assignments and register definitions still require direct comparison.
Is MSP430F4371IPN the same as MSP430F436IPN?
No. The MSP430F4371IPN and MSP430F436IPN are related MSP430x43x devices, but related does not mean identical. The MSP430F4371IPN is specifically documented with 8 MHz operation, 32 KB Flash, 1 KB SRAM, a comparator, SPI/UART, and 160-segment LCD support. The MSP430F436IPN should be selected only after checking its exact LCD, analog, timing, and memory resources against the target design.
What is the best Texas Instruments equivalent for MSP430F4371IPN?
The best-supported same-manufacturer direction is the MSP430x43x family, particularly MSP430F435IPN where the 80-pin LQFP (PN) package can be retained. The MSP430F436IPN, MSP430F4376IPN, and MSP430F4377IPN are also same-family candidates, but each can differ in LCD resources, analog channels, memory, or peripheral configuration. Validate the exact pin, clock, memory, LCD, and firmware differences before treating any candidate as a drop-in replacement.
What peripherals are integrated into MSP430F4371IPN?
The MSP430F4371IPN integrates a comparator, SPI, UART, and LCD segment support into its mixed-signal design. According to the Texas Instruments product summary, the MCU can drive up to 160 LCD segments and includes 32 KB of Flash and 1 KB of SRAM. These resources support local sensing, serial connectivity, display control, and embedded processing while reducing the number of discrete components required in compact instrument designs.
Where can I buy MSP430F4371IPN and check its current price and lead time?
Use the Request a Quote form on this page to request the current MSP430F4371IPN price, stock position, and lead time. The form is the appropriate purchasing channel for a configured, quantity-dependent semiconductor order. Confirm the requested package, carrier format, quantity, and shipment destination with the supplier, and also verify whether Texas Instruments lists the exact MSP430F4371IPN orderable designation as active.
Is MSP430F4371IPN in stock?
The MSP430F4371IPN is listed as active by Texas Instruments, and distributor marketplace results indicate availability activity, but current stock can change by package, carrier format, quantity, and region. Use the Request a Quote form on this page for a current inventory response and delivery commitment. Avoid treating a general product-page availability statement as a guarantee for the exact 80-pin LQFP orderable quantity.
How long is the lead time for MSP430F4371IPN?
The current lead time for MSP430F4371IPN should be confirmed through the Request a Quote form on this page because it can change with order quantity, carrier format, manufacturing conditions, and destination. Texas Instruments lists MSP430F4371IPN as active, which supports ongoing sourcing activity but does not provide a fixed delivery period for every order quantity. Include your production forecast when requesting a commitment.
Can MSP430F4371IPN drive a 160-segment LCD?
Yes, the Texas Instruments product summary states that the MSP430F4371IPN supports a 160-segment LCD. In a panel design, the MCU can generate the required segment-drive signals while its CPU handles button input, state management, and communication. Confirm the exact segment and common-line assignments, voltage requirements, and multiplexing mode in the MSP430x43x manufacturer datasheet because LCD mapping is device-specific.

Data referensi engineering untuk MSP430F4371IPN — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MSP430F4371IPN when a design needs an 8 MHz MSP430 controller with 32 KB Flash, 1 KB SRAM, an integrated comparator, SPI, UART, and explicit support for a 160-segment LCD in an 80-pin LQFP package. The MSP430F435IPN is the most directly documented same-package alternative to investigate when an existing board must be reused, but its LCD, memory, analog, and peripheral assignments must be compared before approval. Consider the MSP430F436IPN, MSP430F4376IPN, or MSP430F4377IPN when their resource sets satisfy the product and firmware can be adjusted. For production, verify exact ordering codes, package drawing, temperature grade, pin multiplexing, and lifecycle status. A same-package candidate should be treated as a drop-in only after both hardware and software compatibility have been demonstrated.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MSP430F435IPN MSP430F436IPN MSP430F4376IPN MSP430F4377IPN
Package 80-pin LQFP (PN), 12 mm x 12 mm 80-pin LQFP (PN), 12 mm x 12 mm 80-pin LQFP (PN), 12 mm x 12 mm 80-pin LQFP (PN), 12 mm x 12 mm 80-pin LQFP (PN), 12 mm x 12 mm
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments

Diferensiator Kunci

  • Largest explicitly documented LCD segment capability in the comparison set (vsMSP430F435IPN)
  • 32 KB Flash and 1 KB SRAM for local application code and working data (vsMSP430F4377IPN)
  • Integrated comparator plus SPI and UART in one mixed-signal controller (vsMSP430F436IPN)

Catatan Desain

Plan the power tree around the MSP430's active and low-power states, including every external sensor, transceiver, and LCD load. The MCU can operate at 8 MHz, but clock choice and peripheral activity materially affect current draw. Use the manufacturer power-supply and decoupling recommendations, place bulk and high-frequency capacitors close to the relevant pins, and avoid allowing unused analog or communication resources to remain active when the firmware enters a low-energy state.

Do not infer the 80-pin LQFP (PN) netlist from the general MSP430x43x family description. Start with the manufacturer pin-description table, then assign LCD segments, comparator inputs, SPI, UART, clock, reset, and power pins using the intended peripheral multiplexing. Preserve the package's thermal and electrical layout exactly, and route sensitive analog comparator inputs away from fast-switching nodes to reduce coupling into measurement thresholds.

A shared 80-pin footprint does not guarantee drop-in firmware compatibility. Before substituting an MSP430x43x member, compare memory size, LCD segment maps, analog-channel assignments, port-mux options, interrupt vectors, clock initialization, and peripheral-instance locations. In particular, verify whether the replacement supports all 160 LCD segments used by the target design and whether code relies on the target device's 32 KB Flash and 1 KB SRAM boundaries.

Keep SPI traces short and continuous, provide a defined ground reference close to the interface, and route them away from comparator inputs and switching power nodes. For UART, minimize unnecessary stubs and maintain signal levels appropriate to the selected logic voltage. If the LCD is used, place its drive connections according to the manufacturer recommended layout and keep external analog conditioning components away from high-current switching paths to preserve reliable threshold detection.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were included in the verified product information. The industrial temperature range does not by itself establish AEC-Q100 qualification.

Pencarian Terkait

MSP430F4371IPN datasheet MSP430F4371IPN specifications MSP430F4371IPN pinout MSP430F4371IPN datasheet pdf MSP430F4371IPN 80 LQFP MSP430F4371IPN equivalent MSP430F4371IPN replacement MSP430F4371IPN cross reference MSP430F4371IPN vs MSP430F435IPN MSP430F4371IPN price MSP430F4371IPN stock Texas Instruments MSP430F4371IPN MSP430F4371 160 segment LCD MSP430F4371 8MHz 32KB Flash

Komponen dan Istilah Terkait

Texas Instruments MSP430F4371IPN MSP430F4371 MSP430F435IPN MSP430F436IPN MSP430F4376IPN MSP430F4377IPN MSP430 CPU16 MSP430x43x mixed-signal microcontroller 16-bit RISC microcontroller ultra-low-power microcontroller 32 KB Flash 1 KB SRAM 8 MHz clock SPI UART integrated comparator 160-segment LCD 80-pin LQFP LQFP package family surface-mount device RoHS REACH AEC-Q100
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ