Texas Instruments

MSP430F448IPZR - 8MHz 16-Bit MCU with 48KB Flash | TI

MPN: MSP430F448IPZR ✓ Aktif
1.8 V to 3.6 V Vdss 280 uA Id 100-pin LQFP (PZ), 14 mm x 14 mm Package 8 MHz Speed 48 KB Memory
MOQ: 1 |

MSP430F448IPZR Ringkasan

Texas Instruments MSP430F448IPZR is an 8 MHz, 16-bit mixed-signal microcontroller with 48 KB of flash memory, 2 KB of SRAM, a 12-bit ADC, comparator, SPI/UART peripherals, and support for a 160-segment LCD. The device is packaged in a 100-pin LQFP (PZ) package and is specified for an operating temperature range of -40°C to 85°C. It combines an MSP430 RISC core, mixed-signal peripherals, and low-power operation in one mixed-signal MCU.

An MSP430 mixed-signal microcontroller combines a low-power RISC processor with analog and communication peripherals on a single integrated circuit. The MSP430 family belongs to the broader embedded-controller hierarchy, where flash-programmable microcontrollers provide programmable control, data acquisition, and serial communication for compact electronic products. Its architecture emphasizes efficient execution, multiple low-power operating states, and deterministic peripheral interaction for battery-powered and portable measurement systems.

The principal features of the MSP430F448IPZR include an 8 MHz maximum clock, 48 KB flash, 2 KB SRAM, a 12-bit analog-to-digital converter, an analog comparator, SPI and UART connectivity, and a 160-segment LCD driver. Flash memory supports firmware and constants, while SRAM provides working memory for acquisition and control routines. The integrated mixed-signal peripherals reduce the number of external components needed for sensor measurement, local display, and communication.

The MSP430 architecture uses a 16-bit RISC CPU with 16-bit registers. Its low-power design is particularly useful in portable measurement products where duty-cycled operation can extend battery life. Peripherals are integrated for direct sensor interfacing, while the LCD driver allows local status or measurement display without another display controller. The manufacturer describes the MSP430 family as being optimized for extended battery life in portable measurement applications.

Typical uses include portable environmental monitors, industrial panel meters, handheld test instruments, connected sensor nodes, and low-power data-acquisition equipment. The 12-bit ADC supports analog measurement, the comparator handles threshold detection, SPI permits attachment to higher-bandwidth sensors or memory, UART supports simple host communication, and the LCD driver is useful in local-display instruments that need to operate without a continuous graphics processor.

PCB design should preserve the MSP430's low-noise analog performance by routing ADC inputs away from switching nodes and keeping supply and ground paths stable. Decoupling capacitors should be placed close to the relevant power pins, and the analog ground and digital ground strategy should follow the device's recommended layout guidance. Firmware should also use the documented low-power modes and avoid unnecessary polling so that the MCU spends more time in its lowest-energy states.

This product page combines the manufacturer's device characteristics, ordering information, technical features, application guidance, pin-package details, and carefully qualified replacement analysis. It is intended to help engineers evaluate clock speed, memory, analog conversion resolution, communication interfaces, LCD capability, power behavior, package compatibility, and sourcing requirements before finalizing an embedded design.

Alternatif penggantian untuk MSP430F448IPZR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

MSP430F435IPZR

✅ Drop-In
📦 100-pin LQFP (PZ)
Same 100-pin PZ MSP430F4xx footprint; memory, ADC, LCD, and peripheral ratings differ and require datasheet confirmation

📋 Alternatif referensi (tidak dalam katalog)

MSP430F448IPZR Rating Maksimal & Karakteristik Listrik

Product Type 16-bit mixed-signal microcontroller
Frekuensi Bawah Maximum 8 MHz
CPU Architecture 16-bit RISC
Register Width 16 bit
Flash Memory 48 KB
Flash Organization 48K x 8 plus 256 bytes
SRAM 2 KB
ADC Resolution 12 bit
ADC Count 2
Comparator 1
USART Count 2
SPI Interface 1
LCD Segment Capacity 160 segments
Supply Voltage Range 1.8 V to 3.6 V
Active Current at 1 MHz and 2.2 V 280 uA
Standby Current 1.1 uA
Off Current with RAM Retention 0.1 uA
Wake-Up Time from Standby Less than 6 us
Low-Power Modes 5
Paket 100-pin LQFP (PZ), 14 mm x 14 mm
Rentang Suhu Kerja -40°C to 85°C
Tipe Mounting Surface mount

MSP430F448IPZR 100-pin lqfp (pz), 14 mm x 14 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk MSP430F448IPZR (100-pin lqfp (pz), 14 mm x 14 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 100-pin lqfp (pz), 14 mm x 14 mm untuk MSP430F448IPZR

Tidak ada data diatribut pin yang tersedia untuk MSP430F448IPZR.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MSP430F448IPZR cocok untuk 6 aplikasis: Portable Environmental Monitor, Industrial Panel Meter, Battery-Powered Data Logger, Handheld Test Instrument, Connected Sensor Node, Local-Display Control Module.

🧩

Portable Environmental Monitor

The MSP430F448IPZR fits portable environmental monitors because its 8 MHz 16-bit RISC core can process sensor readings while its five low-power modes limit energy use between measurements. The 12-bit ADC supports analog sensor acquisition, while 48 KB of flash and 2 KB of SRAM provide room for acquisition logic, calibration data, and control functions. A duty-cycled design can use the documented 1.1 uA standby current and less-than-6-us wake-up time to reduce the energy cost of periodic readings.

🏭

Industrial Panel Meter

The MSP430F448IPZR is suitable for an industrial panel meter because its integrated 160-segment LCD driver can present measurement status without requiring a separate display controller. The 12-bit ADC provides higher conversion resolution than an 8-bit converter for scaled sensor inputs, and the 1.8 V to 3.6 V operating range supports compact low-voltage instrumentation. Firmware can combine display updates with periodic wake-up operation to reduce power when readings remain stable.

⚡

Battery-Powered Data Logger

The MSP430F448IPZR works well in a battery-powered data logger because the 0.1 uA off current with RAM retention and 1.1 uA standby current support long inactive intervals between samples. Its 48 KB flash stores firmware and logged metadata, while the 2 KB SRAM handles active acquisition buffers. The SPI and UART interfaces allow a memory or host connection, and the 280-uA active figure at 1 MHz provides a useful baseline for duty-cycle energy estimates.

🔧

Handheld Test Instrument

The MSP430F448IPZR supports handheld test instruments by combining measurement, communication, and local-display functions in one mixed-signal MCU. A 12-bit ADC can acquire analog test signals, the comparator can implement fast threshold detection, and SPI or the two USARTs can connect probes, sensors, or a host. The 100-pin LQFP footprint exposes the full peripheral set, while the low-power modes improve runtime between operator-triggered measurements.

🌐

Connected Sensor Node

The MSP430F448IPZR fits a connected sensor node that must acquire analog data and communicate intermittently with a controller. SPI provides a deterministic interface to sensors or external storage, while UART supports a simple host or radio connection. The MCU's 8 MHz clock and 16-bit architecture support local filtering and threshold logic without continuous high-power operation. Its 1.8 V to 3.6 V range allows the design to share a low-voltage rail when all connected peripherals support it.

📺

Local-Display Control Module

The MSP430F448IPZR is appropriate for a dedicated local-display control module because the 160-segment LCD driver can manage segmented indicators or a simple character-oriented display. The remaining mixed-signal peripherals allow the same device to read a sensor, evaluate a comparator threshold, and update the display. Because the display driver is integrated, a board can avoid adding a separate LCD controller, provided the required segment count and electrical drive arrangement match the application.

What is the MSP430F448IPZR?
The MSP430F448IPZR is an 8 MHz, 16-bit mixed-signal microcontroller from Texas Instruments with 48 KB of flash, 2 KB of SRAM, a 12-bit ADC, two USARTs, SPI, and a 160-segment LCD driver. According to the Texas Instruments MSP430F448 product information and datasheet, the device is housed in a 100-pin LQFP package and is intended for low-power portable measurement applications.
What is the operating voltage range of MSP430F448IPZR?
The MSP430F448IPZR operates from 1.8 V to 3.6 V. The Texas Instruments mixed-signal microcontroller documentation identifies this range as suitable for low-voltage embedded designs, including portable instruments and sensor-based measurement systems. Designers should verify that every external sensor, transceiver, and display interface also supports the selected rail before applying the MCU directly to those loads.
How much flash and SRAM does MSP430F448IPZR have?
The MSP430F448IPZR provides 48 KB of flash memory and 2 KB of SRAM. According to the Texas Instruments product listing, the flash is organized as 48K x 8 plus 256 bytes. This combination is suitable for compact firmware, calibration constants, acquisition routines, and local sensor processing when a low-power mixed-signal MCU is preferred over a larger application processor.
Where can I download the MSP430F448IPZR datasheet PDF?
The official MSP430F448 datasheet can be accessed through the Texas Instruments product page at https://www.ti.com/lit/gpn/MSP430F448. The document covers the MSP430x43x, MSP430x43x1, and MSP430x44x mixed-signal microcontroller family, including the MSP430F448 ordering information, electrical characteristics, pin descriptions, and peripheral operation.
Where can I find the MSP430F448IPZR pinout?
The MSP430F448IPZR pinout is documented in the pin-description section and package drawings of the official Texas Instruments MSP430F448 datasheet. The exact 100-pin PZ package pin map should be taken from that manufacturer document when assigning PCB nets, especially for LCD segment outputs, analog inputs, communication pins, and power connections.
What can replace the MSP430F448IPZR?
The MSP430F435IPZR is the closest identified same-package replacement because it is also listed as an MSP430 PZ-package device with the same 100-pin form factor. According to the MSP430F448 family datasheet and manufacturer product information, the candidate should still be checked for flash size, SRAM, peripheral differences, ADC channels, LCD capacity, operating voltage, and firmware requirements before substitution.
Is MSP430F435IPZR pin-compatible with MSP430F448IPZR?
The MSP430F435IPZR and MSP430F448IPZR both use the MSP430F4xx family PZ package, but a shared package alone does not prove that every peripheral pin is interchangeable. The manufacturer comparison information identifies MSP430F435IPZR as a related 100-pin device; engineers should confirm ADC, comparator, LCD, serial-interface, and power-pin assignments against the MSP430F448 datasheet before production use.
MSP430F448IPZR vs MSP430F435IPZR: which is better for an LCD meter?
The MSP430F448IPZR is the better documented choice for an LCD meter because its manufacturer product information explicitly specifies a 160-segment LCD driver, 48 KB of flash, 2 KB of SRAM, and a 12-bit ADC. The MSP430F435IPZR may reuse the same 100-pin PZ footprint, but the required LCD segment count and peripheral mapping must be confirmed from the MSP430F435 datasheet before selecting it as the substitute.
When should I choose MSP430F448IPZR over MSP430F435IPZR?
Choose the MSP430F448IPZR when the design specifically benefits from its documented 160-segment LCD driver, 48 KB flash, 2 KB SRAM, 12-bit ADC, SPI, and two USARTs. Consider the MSP430F435IPZR only after confirming that its electrical limits, memory configuration, analog channels, LCD capability, and pin functions satisfy the existing board and firmware requirements.
Is MSP430F448IPZR suitable for battery-powered sensor equipment?
The MSP430F448IPZR is suitable for battery-powered sensor equipment because the Texas Instruments documentation identifies 280 uA active current at 1 MHz and 2.2 V, 1.1 uA standby current, 0.1 uA off current with RAM retention, and five low-power modes. Actual battery life depends on the duty cycle, sensor load, display use, and peripheral activity.
How much power does MSP430F448IPZR consume?
The MSP430F448IPZR consumes 280 uA in active mode at 1 MHz and 2.2 V, while standby current is 1.1 uA and off current with RAM retention is 0.1 uA. These figures come from the MSP430 family documentation. Energy calculations should also include the LCD, sensors, pull networks, regulator efficiency, and the duration of each active measurement interval.
Where can I buy MSP430F448IPZR online?
Use the Request a Quote form on this page to ask for MSP430F448IPZR availability, lead time, and a current quotation. The device is an exact 100-pin PZ-package MSP430F448 ordering option, so the request should include the complete MPN MSP430F448IPZR and any required reel, tray, or inspection criteria for the production build.
What is the price of MSP430F448IPZR?
Current pricing for MSP430F448IPZR should be requested through the Request a Quote form on this page because market price, quantity, and supply can change. Provide the exact MPN and required order quantity so the quotation can reflect the correct production packaging and delivery requirements.
What is the lead time and stock status for MSP430F448IPZR?
Request the current MSP430F448IPZR stock position and lead time through the Request a Quote form on this page. For production planning, include the required quantity, target delivery date, approved-vendor status, and packaging preference so procurement can confirm the correct MSP430F448IPZR configuration and schedule.
Is MSP430F448IPZR RoHS and REACH compliant?
The RoHS and REACH status of MSP430F448IPZR should be confirmed from the current manufacturer product page and supporting compliance documentation before a regulated production release. Use the official MSP430F448 documentation for ordering and environmental information, and request the applicable declaration from Texas Instruments if your compliance process requires a current document.
What are the key specifications of MSP430F448IPZR that engineers should know?
The key MSP430F448IPZR specifications are an 8 MHz 16-bit RISC CPU, 48 KB flash, 2 KB SRAM, 12-bit ADC, comparator, SPI, two USARTs, a 160-segment LCD driver, and a 1.8 V to 3.6 V supply range. Texas Instruments specifies the device in a 100-pin 14 mm x 14 mm LQFP package with operation from -40°C to 85°C.
What is the best cross-brand equivalent for MSP430F448IPZR?
No cross-brand drop-in equivalent for MSP430F448IPZR has been established from the available cross-reference information. A true replacement would need the same 100-pin PZ footprint, compatible power and ground pins, equivalent LCD and analog routing, usable memory, and sufficiently similar peripherals; changing MCU architecture generally requires PCB, firmware, and timing validation rather than a simple substitution.

Data referensi engineering untuk MSP430F448IPZR — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MSP430F448IPZR when a design needs an 8 MHz MSP430 mixed-signal MCU with 48 KB of flash, 2 KB of SRAM, 12-bit ADC acquisition, SPI, two USARTs, and an integrated 160-segment LCD driver. Its five low-power modes and 1.1-uA standby specification suit portable measurement and panel-meter products. Consider the MSP430F435IPZR only when its ADC channels, memory, LCD resources, pin functions, and timing behavior have been checked against the MSP430F448 requirements and the existing PCB remains electrically unchanged. No cross-brand drop-in alternative is established because MCU compatibility depends on exact pin functions and firmware peripherals, not merely package dimensions. For designs requiring substantially more memory, faster conversion, or more communication channels, selecting a different MCU family may be preferable to forcing a pin-compatible substitution.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MSP430F435IPZR
Brand Texas Instruments Texas Instruments
Package 100-pin LQFP (PZ), 14 mm x 14 mm 100-pin LQFP (PZ)

Diferensiator Kunci

  • Large integrated LCD segment capacity (vsMSP430F435IPZR)
  • Specific memory configuration for compact firmware (vsMSP430F435IPZR)
  • Integrated mixed-signal connectivity (vsMSP430F435IPZR)

Catatan Desain

Route the 12-bit ADC inputs away from switching nodes and keep their traces short to reduce coupling from adjacent digital signals. Follow the ADC channel grouping and reference arrangement shown in the Texas Instruments MSP430F448 datasheet when assigning the analog ground and supply pins.

Place the required bypass capacitors directly beside the associated VCC and ground pins, and use the minimum trace length recommended by the manufacturer. Because the documented supply range is 1.8 V to 3.6 V, verify startup, ADC accuracy, and peripheral limits at the lowest voltage used by the product.

Do not assume that an identical 100-pin package guarantees a drop-in replacement. Compare LCD outputs, ADC channels, comparator connections, serial-interface pins, reset behavior, and supply pins between the MSP430F448 and the candidate MSP430F435 before modifying an existing PCB or reusing firmware.

Use the documented low-power modes only after confirming which RAM contents, clocks, and peripherals remain active. Wake-up time is less than 6 us, but frequent short measurement cycles can still dominate energy use; calculate duty-cycle consumption from the 280-uA active and 1.1-uA standby figures together with sensor and display loads.

Preserve a quiet return path for the ADC and avoid routing LCD or communication signals beneath sensitive analog inputs where practical. Keep crystal, timing, and high-current output paths separated from analog inputs to minimize deterministic coupling rather than relying only on filtering after conversion.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The available manufacturer and distributor product information does not explicitly state the requested compliance outcomes. Confirm current RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals documentation with Texas Instruments before production release.

Data disahkan pada: 2026-11-15 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

MSP430F448IPZR datasheet MSP430F448IPZR pinout MSP430F448IPZR datasheet pdf MSP430F448IPZR specifications MSP430F448IPZR equivalent MSP430F448IPZR replacement MSP430F448IPZR price MSP430F448IPZR stock Texas Instruments MSP430F448IPZR MSP430F448IPZR LQFP-100 MSP430F448IPZR ADC LCD MSP430F448IPZR vs MSP430F435IPZR MSP430F448 8MHz 48KB flash MSP430F448 portable measurement application MSP430F448IPZR cross reference

Komponen dan Istilah Terkait

Texas Instruments MSP430F448IPZR MSP430F448 MSP430F435IPZR MSP430 16-bit RISC CPU mixed-signal microcontroller embedded microcontroller semiconductor 12-bit ADC analog comparator SPI UART USART 160-segment LCD 48 KB flash memory 2 KB SRAM 8 MHz clock 1.8 V to 3.6 V supply low-power mode portable measurement industrial panel meter battery-powered data logger 100-pin LQFP PZ package
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ