MSP430F6736IPZ - 25MHz Metering MCU | Texas Instruments
MPN: MSP430F6736IPZ ✓ AktifMSP430F6736IPZ Ringkasan
A mixed-signal microcontroller is a semiconductor that integrates digital control, analog measurement, and specialized communication peripherals into one device. In the product hierarchy, the MSP430F6736 belongs to the mixed-signal MCU class, the MSP430 family, and the broader microcontroller category. Its integration reduces the component count required for energy-metering and low-power data-acquisition systems while retaining programmable control over analog front ends.
The three Sigma-Delta ADCs provide high-resolution measurement channels for metering applications, while the separate 10-bit ADC supports additional analog signal acquisition. Communication resources include three eUSCI_A modules and one eUSCI_B module. Four 16-bit timers support timing, capture, and periodic event generation, while DMA transfers data between memory and peripherals with reduced CPU intervention. The RTC module includes alarm capabilities for scheduled sampling and data logging.
The MSP430 CPUXV2 architecture uses a 16-bit RISC instruction set with 16-bit registers and constant generators. At a maximum clock frequency of 25 MHz, the controller provides deterministic execution for protocol handling, measurement control, display updates, and energy calculation. The integrated LCD driver supports segmented metering displays, reducing the need for external display-control hardware in dedicated meter designs.
Typical uses include single-phase electricity meters, smart-grid terminal equipment, low-power industrial data loggers, and connected sensing systems. The same device can coordinate analog measurement, communications, local display output, and real-time scheduling. Its broad peripheral integration is particularly useful when both low standby power and deterministic metering behavior are required.
PCB design should preserve short, controlled analog-signal paths around the ADC inputs while keeping switching circuitry and high-current routing away from precision measurement channels. Decoupling must follow the Texas Instruments datasheet pin and layout guidance, including the required capacitor values and exposed-pad connection. Firmware should also preserve clock and memory timing assumptions associated with the 25 MHz operating range.
This page combines the exact ordering information, technical characteristics, compatible family references, application guidance, and design considerations needed to evaluate the MSP430F6736IPZ for a new metering or low-power embedded design.
Alternatif penggantian untuk MSP430F6736IPZ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MSP430F6736IPZ (sama faktor bentuk dan footprint) — berbeda di dalam Package, CPU Architecture, Flash Memory, Hardware Multiplier, LCD Driver.
MSP430F6733IPZ
✅ Drop-InKontak untuk harga
Lihat Datasheet →MSP430F6736IPZ Rating Maksimal & Karakteristik Listrik
| Product Type | Mixed-signal microcontroller and single-phase metering SoC |
| CPU Architecture | 16-bit RISC MSP430 CPUXV2 |
| Frekuensi Bawah Maximum | 25 MHz |
| Flash Memory | 128 KB |
| RAM | 8 KB |
| Sigma-Delta ADC Count | 3 channels |
| Sigma-Delta ADC Resolution | 24-bit |
| Additional ADC | 10-bit |
| eUSCI_A Modules | 3 modules |
| eUSCI_B Modules | 1 module |
| Timer Count | 4 timers |
| Timer Resolution | 16-bit |
| RTC | Real-time clock with alarm capability |
| LCD Driver | Integrated |
| Tegangan Pemuat Kerja | 2.5 V or 3.3 V |
| Rentang Suhu Kerja | -40 °C to +85 °C |
| Paket | 100-pin LQFP (PZ), 14 mm × 14 mm |
| Tipe Mounting | Surface mount |
| Status RoHS | Compliant |
| Status Lingkungan Hidup | Active |
| DMA | Integrated DMA module |
| Hardware Multiplier | Integrated |
MSP430F6736IPZ 100-pin lqfp (pz), 14 mm × 14 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk MSP430F6736IPZ (100-pin lqfp (pz), 14 mm × 14 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk MSP430F6736IPZ.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MSP430F6736IPZ cocok untuk 6 aplikasis: Single-Phase Smart Electricity Meter, Industrial Energy Data Logger, Smart-Grid Terminal Equipment, Low-Power Sensor Acquisition Hub, Battery-Powered Remote Monitor, Local Metering Instrument with LCD.
Single-Phase Smart Electricity Meter
The MSP430F6736IPZ is well suited to single-phase metering because it combines three 24-bit Sigma-Delta ADCs with an alarm-capable real-time clock and an integrated LCD driver. The microcontroller can acquire voltage and current samples, calculate consumption, maintain time-based tariff schedules, and present information through a segmented display without a separate LCD controller. At up to 25 MHz, its 16-bit RISC core also supports communications and local data processing, while the 128 KB Flash provides room for firmware and calibration tables. The main design consideration is preserving clean analog signal paths and validating metrology performance across the complete temperature range.
Direkomendasikan
Industrial Energy Data Logger
The MSP430F6736IPZ can serve as the control and measurement hub in a low-power industrial energy logger. Its three 24-bit Sigma-Delta ADC channels support high-resolution acquisition from compatible analog front ends, while the 10-bit ADC handles additional monitoring signals. Four 16-bit timers, DMA, and the 25 MHz MSP430 CPUXV2 allow periodic sampling and buffering without requiring a high-power processor. The 8 KB RAM must accommodate acquisition buffers, while the 128 KB Flash can hold logging control, communication protocols, and calibration data. Low-power operation should be designed around the RTC and measured sleep-current targets.
Direkomendasikan
Smart-Grid Terminal Equipment
The MSP430F6736IPZ supports smart-grid terminal functions by combining dedicated metering conversion hardware with multiple serial communication resources. Three eUSCI_A modules and one eUSCI_B module allow the design to organize communication channels while the DMA engine transfers data between peripherals and memory. The integrated RTC and alarm capability support scheduled measurements, synchronization events, and time-stamped records. For grid-connected equipment, engineers should isolate communication and measurement interfaces appropriately, define robust firmware recovery paths, and verify EMC performance. The 100-pin LQFP package offers enough external connectivity for sensing, display, communications, and programming requirements.
Direkomendasikan
Low-Power Sensor Acquisition Hub
The MSP430F6736IPZ can act as a low-power acquisition hub for sensors requiring more resolution than a conventional 10-bit ADC. The three 24-bit Sigma-Delta ADC channels can acquire slowly changing or multiplexed analog inputs, while the separate 10-bit ADC serves monitoring or threshold functions. Four 16-bit timers support periodic conversion and sampling intervals, and DMA can reduce processor involvement during transfers. The integrated LCD driver is useful for local status displays, and the RTC permits event scheduling without continuous timer activity. Designers must calculate acquisition timing, settling requirements, average bandwidth, and power budget for the selected sensor signals.
Direkomendasikan
Battery-Powered Remote Monitor
The MSP430F6736IPZ is appropriate for a battery-powered remote monitor when both analog measurement and low-power operation are required. Its MSP430 low-power modes can reduce consumption between scheduled events, while the RTC and alarm capability provide an efficient timing reference for periodic sampling and data transmission. The 25 MHz CPU can remain active briefly for calculation and communications, then return to a lower-power state after completing its task. Three high-resolution Sigma-Delta channels support precision measurements, but the analog front end and external load-switching strategy will often determine final battery life. The firmware should therefore enter low-power modes only after confirming that each peripheral and GPIO state is safe.
Direkomendasikan
Local Metering Instrument with LCD
The MSP430F6736IPZ integrates both measurement and display control for compact metering instruments. Its three 24-bit Sigma-Delta ADCs can handle precision sensor inputs, while the integrated LCD driver reduces the need for a separate display controller. Four 16-bit timers provide event timing, the RTC supports calendars and scheduled readings, and DMA assists with moving measurement data into display or communication buffers. The 128 KB Flash and 8 KB RAM are sufficient for embedded meter functions, although buffering strategy depends on the selected sampling rate. Engineers should use the manufacturer LCD segment mapping and pin-assignment tables to implement a reliable display layout.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MSP430F6736IPZ — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MSP430F6733IPZ |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 100-LQFP (PZ), 14 mm × 14 mm | 100-LQFP (PZ) |
| Device Family | MSP430F6736 | MSP430F6733 |
Diferensiator Kunci
- Dedicated metering conversion resources (vsMSP430F6733IPZ)
- Integrated display and real-time functions (vsMSP430F6733IPZ)
- High memory capacity for metering firmware (vsMSP430F6733IPZ)
Catatan Desain
Keep the Sigma-Delta ADC inputs and their reference paths away from digital switching nodes, high-current return paths, and communication outputs. Use a continuous ground reference beneath the analog section and follow the Texas Instruments MSP430F6736 recommended-layout guidance for analog and digital partitioning. The 100-pin LQFP footprint offers several supply pins, but each supply connection must follow the pin-description table and datasheet decoupling requirements. Place required bypass capacitors adjacent to their assigned pins to minimize inductive impedance and preserve measurement stability.
Design the 2.5 V or 3.3 V supply network for both low-noise analog operation and digital switching requirements. Follow the manufacturer's specified capacitor values, voltage tolerances, and power-up sequencing rather than relying on generic bulk-capacitor rules. Because average consumption depends on the MSP430 clock mode and enabled peripherals, measure standby current with the production firmware state. External regulators and analog front ends should also be included in the final system power budget.
Do not treat a shared LQFP footprint as proof that every MSP430F6xx firmware image can be reused. ADC channels, interrupt vectors, peripheral multiplexing, pin assignments, calibration procedures, and LCD mapping can change between the F6736 and F6733 families. Review the current manufacturer datasheet and device-specific driver support before replacement. Also distinguish MSP430F6736IPZ tray packaging from MSP430F6736IPZR reel packaging so the assembly line receives the intended shipment form.
Treat analog acquisition timing as part of the firmware architecture. Use the timers for repeatable sampling, DMA for sustained buffer transfers, and the RTC for long-interval events. Confirm conversion settling, channel multiplexing, oversampling, and digital-filter requirements against the manufacturer ADC guidance. Avoid interrupting critical acquisition windows with communication routines, and test clock-source transitions and peripheral activity at the maximum 25 MHz operating condition.
Informasi Konformitas
The product listing identifies the MSP430F6736IPZ as RoHS compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified.