Texas Instruments

MSP430F6736IPZ - 25MHz Metering MCU | Texas Instruments

N.º da peça: MSP430F6736IPZ ✓ Ativo
2.5 V or 3.3 V Vdss 100-pin LQFP (PZ), 14 mm × 14 mm Package 25 MHz Speed 128 KB Memory
MOQ: 1 |

MSP430F6736IPZ Visão geral

The Texas Instruments MSP430F6736IPZ is a 16-bit, 25 MHz mixed-signal microcontroller and single-phase metering SoC with 128 KB Flash, 8 KB RAM, three Sigma-Delta ADCs, a 10-bit ADC, an LCD driver, and a real-time clock in a 100-pin LQFP package. The device combines the MSP430 RISC core with three enhanced universal serial communication interface modules, four 16-bit timers, a hardware multiplier, DMA, and alarm-capable RTC functions.

A mixed-signal microcontroller is a semiconductor that integrates digital control, analog measurement, and specialized communication peripherals into one device. In the product hierarchy, the MSP430F6736 belongs to the mixed-signal MCU class, the MSP430 family, and the broader microcontroller category. Its integration reduces the component count required for energy-metering and low-power data-acquisition systems while retaining programmable control over analog front ends.

The three Sigma-Delta ADCs provide high-resolution measurement channels for metering applications, while the separate 10-bit ADC supports additional analog signal acquisition. Communication resources include three eUSCI_A modules and one eUSCI_B module. Four 16-bit timers support timing, capture, and periodic event generation, while DMA transfers data between memory and peripherals with reduced CPU intervention. The RTC module includes alarm capabilities for scheduled sampling and data logging.

The MSP430 CPUXV2 architecture uses a 16-bit RISC instruction set with 16-bit registers and constant generators. At a maximum clock frequency of 25 MHz, the controller provides deterministic execution for protocol handling, measurement control, display updates, and energy calculation. The integrated LCD driver supports segmented metering displays, reducing the need for external display-control hardware in dedicated meter designs.

Typical uses include single-phase electricity meters, smart-grid terminal equipment, low-power industrial data loggers, and connected sensing systems. The same device can coordinate analog measurement, communications, local display output, and real-time scheduling. Its broad peripheral integration is particularly useful when both low standby power and deterministic metering behavior are required.

PCB design should preserve short, controlled analog-signal paths around the ADC inputs while keeping switching circuitry and high-current routing away from precision measurement channels. Decoupling must follow the Texas Instruments datasheet pin and layout guidance, including the required capacitor values and exposed-pad connection. Firmware should also preserve clock and memory timing assumptions associated with the 25 MHz operating range.

This page combines the exact ordering information, technical characteristics, compatible family references, application guidance, and design considerations needed to evaluate the MSP430F6736IPZ for a new metering or low-power embedded design.

Alternativas drop-in para MSP430F6736IPZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MSP430F6736IPZ (mesmo formato e footprint) — diferindo em Package, CPU Architecture, Flash Memory, Hardware Multiplier, LCD Driver.

Texas Instruments
Package: 100-LQFP (14 mm x 14 mm)
CPU Architecture: 16-bit RISC
Flash Memory: 64 KB
Comparar com MSP430F6736IPZ →
Texas Instruments
Package: 100-pin LQFP (PZ), 14 x 14 mm
CPU Architecture: MSP430 CPUXV2, 16-bit
Flash Memory: 96 KB (96K x 8 bits)
Comparar com MSP430F6736IPZ →
Texas Instruments
Package: 100-LQFP (14x14 mm)
Hardware Multiplier: 32-bit
LCD Driver: Integrated, up to 320 segments
Comparar com MSP430F6736IPZ →

MSP430F6733IPZ

✅ Drop-In
Texas Instruments
📦 100-LQFP (PZ)
Mixed-signal microcontroller and single-phase metering SoC · 16-bit RISC · 25 MHz · 64 KB · 4 KB · 3 channels · 24-bit · 10-bit

Consulte o preço

Ver ficha técnica →

MSP430F6736IPZ Classificações máximas e características elétricas

Product Type Mixed-signal microcontroller and single-phase metering SoC
CPU Architecture 16-bit RISC MSP430 CPUXV2
Frequência máxima de clock 25 MHz
Flash Memory 128 KB
RAM 8 KB
Sigma-Delta ADC Count 3 channels
Sigma-Delta ADC Resolution 24-bit
Additional ADC 10-bit
eUSCI_A Modules 3 modules
eUSCI_B Modules 1 module
Timer Count 4 timers
Timer Resolution 16-bit
RTC Real-time clock with alarm capability
LCD Driver Integrated
Tensão de alimentação de operação 2.5 V or 3.3 V
Faixa de temperatura de operação -40 °C to +85 °C
Encapsulamento 100-pin LQFP (PZ), 14 mm × 14 mm
Tipo de montagem Surface mount
Status RoHS Compliant
Status do ciclo de vida Active
DMA Integrated DMA module
Hardware Multiplier Integrated

Guia de Configuração de Pinos do MSP430F6736IPZ 100-pin lqfp (pz), 14 mm × 14 mm

Configuração de pinos para MSP430F6736IPZ (pacote 100-pin lqfp (pz), 14 mm × 14 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 100-pin lqfp (pz), 14 mm × 14 mm para MSP430F6736IPZ

Nenhum dado detalhado de pinagem disponível para MSP430F6736IPZ.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MSP430F6736IPZ é adequado para 6 aplicaçãos: Single-Phase Smart Electricity Meter, Industrial Energy Data Logger, Smart-Grid Terminal Equipment, Low-Power Sensor Acquisition Hub, Battery-Powered Remote Monitor, Local Metering Instrument with LCD.

⚡

Single-Phase Smart Electricity Meter

The MSP430F6736IPZ is well suited to single-phase metering because it combines three 24-bit Sigma-Delta ADCs with an alarm-capable real-time clock and an integrated LCD driver. The microcontroller can acquire voltage and current samples, calculate consumption, maintain time-based tariff schedules, and present information through a segmented display without a separate LCD controller. At up to 25 MHz, its 16-bit RISC core also supports communications and local data processing, while the 128 KB Flash provides room for firmware and calibration tables. The main design consideration is preserving clean analog signal paths and validating metrology performance across the complete temperature range.

🏭

Industrial Energy Data Logger

The MSP430F6736IPZ can serve as the control and measurement hub in a low-power industrial energy logger. Its three 24-bit Sigma-Delta ADC channels support high-resolution acquisition from compatible analog front ends, while the 10-bit ADC handles additional monitoring signals. Four 16-bit timers, DMA, and the 25 MHz MSP430 CPUXV2 allow periodic sampling and buffering without requiring a high-power processor. The 8 KB RAM must accommodate acquisition buffers, while the 128 KB Flash can hold logging control, communication protocols, and calibration data. Low-power operation should be designed around the RTC and measured sleep-current targets.

🌐

Smart-Grid Terminal Equipment

The MSP430F6736IPZ supports smart-grid terminal functions by combining dedicated metering conversion hardware with multiple serial communication resources. Three eUSCI_A modules and one eUSCI_B module allow the design to organize communication channels while the DMA engine transfers data between peripherals and memory. The integrated RTC and alarm capability support scheduled measurements, synchronization events, and time-stamped records. For grid-connected equipment, engineers should isolate communication and measurement interfaces appropriately, define robust firmware recovery paths, and verify EMC performance. The 100-pin LQFP package offers enough external connectivity for sensing, display, communications, and programming requirements.

🧩

Low-Power Sensor Acquisition Hub

The MSP430F6736IPZ can act as a low-power acquisition hub for sensors requiring more resolution than a conventional 10-bit ADC. The three 24-bit Sigma-Delta ADC channels can acquire slowly changing or multiplexed analog inputs, while the separate 10-bit ADC serves monitoring or threshold functions. Four 16-bit timers support periodic conversion and sampling intervals, and DMA can reduce processor involvement during transfers. The integrated LCD driver is useful for local status displays, and the RTC permits event scheduling without continuous timer activity. Designers must calculate acquisition timing, settling requirements, average bandwidth, and power budget for the selected sensor signals.

🔋

Battery-Powered Remote Monitor

The MSP430F6736IPZ is appropriate for a battery-powered remote monitor when both analog measurement and low-power operation are required. Its MSP430 low-power modes can reduce consumption between scheduled events, while the RTC and alarm capability provide an efficient timing reference for periodic sampling and data transmission. The 25 MHz CPU can remain active briefly for calculation and communications, then return to a lower-power state after completing its task. Three high-resolution Sigma-Delta channels support precision measurements, but the analog front end and external load-switching strategy will often determine final battery life. The firmware should therefore enter low-power modes only after confirming that each peripheral and GPIO state is safe.

📺

Local Metering Instrument with LCD

The MSP430F6736IPZ integrates both measurement and display control for compact metering instruments. Its three 24-bit Sigma-Delta ADCs can handle precision sensor inputs, while the integrated LCD driver reduces the need for a separate display controller. Four 16-bit timers provide event timing, the RTC supports calendars and scheduled readings, and DMA assists with moving measurement data into display or communication buffers. The 128 KB Flash and 8 KB RAM are sufficient for embedded meter functions, although buffering strategy depends on the selected sampling rate. Engineers should use the manufacturer LCD segment mapping and pin-assignment tables to implement a reliable display layout.

Resumo dos produtos recomendados

MSP430F6736IPZ Texas Instruments Usado em: Single-Phase Smart Electricity Meter, Industrial Energy Data Logger, Smart-Grid Terminal Equipment, Low-Power Sensor Acquisition Hub, Battery-Powered Remote Monitor, Local Metering Instrument with LCD EVM430-I2040S MSP430 metering evaluation platform Usado em: Single-Phase Smart Electricity Meter, Industrial Energy Data Logger, Battery-Powered Remote Monitor, Local Metering Instrument with LCD MSP430F6736IPZR Reel-packaged family variant Usado em: Smart-Grid Terminal Equipment, Low-Power Sensor Acquisition Hub
What is the MSP430F6736IPZ?
The MSP430F6736IPZ is a 16-bit, 25 MHz MSP430 mixed-signal microcontroller intended primarily for single-phase metering and low-power data-acquisition systems. According to the Texas Instruments MSP430F6736 product page, it combines 128 KB Flash, 8 KB RAM, three Sigma-Delta ADCs, a 10-bit ADC, an LCD driver, and an RTC in a 100-pin LQFP package. Its integrated peripherals reduce the external circuitry and software overhead needed for accurate measurement, local display control, communications, and energy-data processing.
What are the key specifications of MSP430F6736IPZ that engineers should know?
The MSP430F6736IPZ combines a 25 MHz 16-bit RISC CPU with 128 KB Flash, 8 KB RAM, three 24-bit Sigma-Delta ADCs, and one 10-bit ADC. According to the Texas Instruments product page, the device also provides four 16-bit timers, three eUSCI_A modules, one eUSCI_B module, DMA, a hardware multiplier, an alarm-capable RTC, and an integrated LCD driver. Its 100-pin LQFP package supports 2.5 V or 3.3 V operation over -40 °C to +85 °C, making it suitable for metering and industrial embedded designs.
How many ADC channels does the MSP430F6736IPZ have?
The MSP430F6736IPZ provides three Sigma-Delta ADC channels with 24-bit resolution and one additional 10-bit ADC channel. According to the Texas Instruments MSP430F6736 product page, the Sigma-Delta converters are intended for high-resolution analog measurement, while the 10-bit ADC adds a conventional ADC resource. The exact analog-input mapping, voltage ranges, gain settings, and acquisition timing for each channel should be confirmed in the MSP430F6736 datasheet and the selected board design.
What memory is available in the MSP430F6736IPZ?
The MSP430F6736IPZ contains 128 KB of Flash memory and 8 KB of RAM. According to the Texas Instruments MSP430F6736 product page, the Flash provides nonvolatile program storage for metering algorithms, communication stacks, calibration data, and firmware updates, while the RAM supports working state, buffers, and interrupt-driven acquisition. The MSP430 CPUXV2 architecture uses 16-bit registers and constant generators to support efficient execution within these memory constraints.
Where can I download the MSP430F6736IPZ datasheet PDF?
The MSP430F6736IPZ datasheet and ordering information are available through the official Texas Instruments MSP430F6736 product page at https://www.ti.com/product/MSP430F6736. Use the manufacturer datasheet for the complete pin description, electrical characteristics, ADC implementation, memory map, clock requirements, and recommended application schematic. The 100-pin LQFP pin arrangement should be checked against the PZ package drawing before assigning PCB nets or connecting analog and power supplies.
Where can I find the MSP430F6736IPZ pinout?
The authoritative MSP430F6736IPZ pinout is the 100-pin LQFP PZ pin configuration published in the Texas Instruments MSP430F6736 datasheet. The manufacturer product page identifies the package as LQFP (PZ) with 100 pins. Use that pin-description table when assigning VDD, VSS, analog inputs, communication signals, timer inputs, LCD outputs, and programming interfaces. A separate pin table should not be inferred from an equivalent ordering code because unused and special-function pins may differ between related devices.
MSP430F6736IPZ vs MSP430F6736AIPZR - which is better for a new design?
The MSP430F6736IPZ is the tray-packaged 100-pin LQFP version of the MSP430F6736, while MSP430F6736AIPZR denotes a related A-series device supplied in a reel format. The Texas Instruments listings identify both as single-phase metering SoCs with 128 KB Flash, 8 KB RAM, three Sigma-Delta ADCs, and a 100-pin PZ package. For a new production design, compare the current datasheet revisions, device differences, qualification status, and assembly requirements rather than treating the ordering-code change as automatically interchangeable.
What is the difference between MSP430F6736IPZ and MSP430F6736IPZR?
The principal documented difference between MSP430F6736IPZ and MSP430F6736IPZR is the shipment form: the IPZ order code is associated with tray packaging, while the IPZR code is associated with reel packaging. The Texas Instruments device listings identify the same MSP430F6736 device family, 25 MHz 16-bit architecture, 128 KB Flash, 8 KB RAM, metering functions, and 100-pin LQFP PZ package. Their electrical functions must still be checked against the current manufacturer datasheet before one is substituted for the other.
What can replace MSP430F6736IPZ?
The MSP430F6736IPZR is a directly related ordering option in the same 100-pin LQFP PZ family, but it changes the reel-versus-tray shipment form rather than providing a different silicon function. A separate family candidate identified in cross-reference material is the MSP430F6733IPZ, which also uses the 100-pin PZ package but belongs to the F6733 device family. Before replacement, confirm ADC channel requirements, memory, peripheral mapping, electrical limits, firmware compatibility, qualification, and package drawing against the manufacturer datasheets.
Is MSP430F6736IPZ suitable for a single-phase energy meter?
Yes, the MSP430F6736IPZ is specifically positioned as a single-phase metering SoC and includes three 24-bit Sigma-Delta ADCs for high-resolution measurement. According to the Texas Instruments product page, it also provides an integrated LCD driver, RTC, communications peripherals, timers, DMA, and sufficient memory for meter firmware. A production design must still validate current-voltage signal conditioning, metrology accuracy, calibration, safety isolation, EMC performance, and display requirements for the target metering standard.
When should I choose MSP430F6736IPZ over MSP430F6733IPZ?
Choose the MSP430F6736IPZ when the design specifically requires the F6736 device family's 128 KB Flash, 8 KB RAM, three Sigma-Delta ADCs, and established MSP430F6736 peripheral configuration. Choose the MSP430F6733IPZ only after verifying that its ADC count, memory configuration, communications resources, and pin functions satisfy the design. Although both use the 100-pin PZ package, a shared footprint does not by itself guarantee firmware, analog-front-end, or metrology compatibility.
Does MSP430F6736IPZ support low-power metering designs?
The MSP430F6736IPZ is an ultra-low-power mixed-signal MCU platform designed for metering and data-acquisition systems that cannot operate continuously at maximum clock speed. Its MSP430 architecture includes low-power operating modes, while the RTC supports time-based event handling and the DMA can move peripheral data with less CPU intervention. Final standby-current performance depends on the selected clock tree, enabled peripherals, analog circuitry, GPIO states, retention requirements, and firmware sleep sequence.
How much flash and RAM does the MSP430F6736IPZ have?
The MSP430F6736IPZ provides 128 KB of Flash and 8 KB of RAM. According to the Texas Instruments MSP430F6736 product page, the 128 KB Flash supports firmware, metering parameters, calibration tables, and communication protocols, while the 8 KB RAM provides working memory for acquisition and control tasks. Designers should budget RAM carefully for simultaneous buffered measurements and communications, and should place persistent calibration or configuration records in the appropriate nonvolatile memory region.
Where can I buy MSP430F6736IPZ and check its lead time?
Use the Request a Quote form on this page to ask about MSP430F6736IPZ availability, current lead time, and order quantities. The manufacturer lists the device as active, and a product listing reports a typical lead time of 3–7 business days, but that timing can change with order size and supply status. The quote form lets purchasing confirm the exact tray-packaged MPN, schedule, and commercial terms without relying on a stale quantity-break listing.
Is MSP430F6736IPZ in stock and what is its price?
The MSP430F6736IPZ is listed as active by Texas Instruments, and current inventory should be confirmed through the Request a Quote form on this page. The form provides the appropriate route for unit pricing, stock allocation, and quantity-dependent lead time for the exact 100-pin LQFP ordering code. Buyers should specify whether the target assembly process requires tray-packed MSP430F6736IPZ or a reel-packed ordering option before releasing a purchase order.
What is the best drop-in replacement for MSP430F6736IPZ?
The closest documented package-level choice is MSP430F6736IPZR, which retains the MSP430F6736 family and 100-pin LQFP PZ package while changing the shipment form to reel packaging. MSP430F6733IPZ is another same-package family candidate, but it is not an automatic functional replacement. Because this mixed-signal MCU contains specialized ADC, LCD, RTC, and communication resources, engineers should verify the device-specific pin functions, memory map, firmware support, and metrology requirements before approving any substitution.

Dados de referência de engenharia para MSP430F6736IPZ — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MSP430F6736IPZ for a new single-phase metering or energy-data-acquisition design that requires three 24-bit Sigma-Delta ADC channels, 128 KB Flash, 8 KB RAM, an integrated LCD driver, and an alarm-capable RTC. Its 25 MHz 16-bit MSP430 CPUXV2 core also provides enough performance for communications, measurement control, and local processing. MSP430F6736IPZR is appropriate when the electrical design is unchanged but reel packaging is required for automated assembly. Consider MSP430F6733IPZ only when its ADC, memory, peripheral, and firmware requirements are fully compatible; the common 100-pin LQFP footprint alone does not guarantee drop-in suitability. For a production release, validate the analog front end, calibration accuracy, LCD mapping, communication timing, low-power behavior, and temperature performance against the intended application requirements.

Comparação com alternativas

Parâmetro Este produto MSP430F6733IPZ
Brand Texas Instruments Texas Instruments
Package 100-LQFP (PZ), 14 mm × 14 mm 100-LQFP (PZ)
Device Family MSP430F6736 MSP430F6733

Principais diferenciais

  • Dedicated metering conversion resources (vs MSP430F6733IPZ)
  • Integrated display and real-time functions (vs MSP430F6733IPZ)
  • High memory capacity for metering firmware (vs MSP430F6733IPZ)

Notas de projeto

Keep the Sigma-Delta ADC inputs and their reference paths away from digital switching nodes, high-current return paths, and communication outputs. Use a continuous ground reference beneath the analog section and follow the Texas Instruments MSP430F6736 recommended-layout guidance for analog and digital partitioning. The 100-pin LQFP footprint offers several supply pins, but each supply connection must follow the pin-description table and datasheet decoupling requirements. Place required bypass capacitors adjacent to their assigned pins to minimize inductive impedance and preserve measurement stability.

Design the 2.5 V or 3.3 V supply network for both low-noise analog operation and digital switching requirements. Follow the manufacturer's specified capacitor values, voltage tolerances, and power-up sequencing rather than relying on generic bulk-capacitor rules. Because average consumption depends on the MSP430 clock mode and enabled peripherals, measure standby current with the production firmware state. External regulators and analog front ends should also be included in the final system power budget.

Do not treat a shared LQFP footprint as proof that every MSP430F6xx firmware image can be reused. ADC channels, interrupt vectors, peripheral multiplexing, pin assignments, calibration procedures, and LCD mapping can change between the F6736 and F6733 families. Review the current manufacturer datasheet and device-specific driver support before replacement. Also distinguish MSP430F6736IPZ tray packaging from MSP430F6736IPZR reel packaging so the assembly line receives the intended shipment form.

Treat analog acquisition timing as part of the firmware architecture. Use the timers for repeatable sampling, DMA for sustained buffer transfers, and the RTC for long-interval events. Confirm conversion settling, channel multiplexing, oversampling, and digital-filter requirements against the manufacturer ADC guidance. Avoid interrupting critical acquisition windows with communication routines, and test clock-source transitions and peripheral activity at the maximum 25 MHz operating condition.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The product listing identifies the MSP430F6736IPZ as RoHS compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MSP430F6736IPZ datasheet MSP430F6736IPZ pinout MSP430F6736IPZ datasheet pdf MSP430F6736IPZ specifications MSP430F6736IPZ equivalent MSP430F6736IPZ replacement MSP430F6736IPZ cross reference MSP430F6736IPZ price MSP430F6736IPZ stock Texas Instruments MSP430F6736IPZ MSP430F6736 vs MSP430F6733IPZ MSP430F6736 100 pin LQFP pinout MSP430F6736 single phase metering SoC MSP430F6736 3 Sigma Delta ADC MSP430F6736 EVM430-I2040S

Componentes & termos relacionados

Texas Instruments MSP430F6736IPZ MSP430F6736 MSP430F6736IPZR MSP430F6733IPZ MSP430 CPUXV2 mixed-signal microcontroller single-phase metering SoC 16-bit RISC Sigma-Delta ADC 24-bit ADC 10-bit ADC Universal Serial Communication Interface eUSCI_A eUSCI_B Direct Memory Access real-time clock LCD driver 128 KB Flash 8 KB RAM 100-pin LQFP PZ package surface-mount package RoHS smart electricity meter
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ