OPA124UA - 1.5MHz Precision Low-Noise Op Amp | Texas Instruments
MPN: OPA124UA ✗ Akhir HidupOPA124UA Ringkasan
An operational amplifier is a high-gain, differential-input analog amplifier used to amplify voltage differences. Within the broader semiconductor hierarchy, it belongs to the operational-amplifier class, analog IC category, and signal-conditioning family. OPA124UA provides closed-loop gain and signal-conditioning functions where low noise, precision, and moderate bandwidth are more important than high-speed operation.
Key features include a 1.5 MHz gain-bandwidth product, 1.6 V/us slew rate, and a supply range of ±5 V to ±18 V. The manufacturer describes the OPA124 as a low-noise precision DIFET operational amplifier whose cascode design improves input precision and reduces susceptibility to flicker noise. Laser trimming of thin-film resistors provides stable offset and drift characteristics across production variations.
OPA124UA uses a cascode input architecture to combine low-voltage noise with precision input characteristics. Its 1.5 MHz bandwidth supports audio-frequency and general instrumentation signals, while the 1.6 V/us slew rate provides adequate response for slowly varying control and measurement signals. The 8-pin SOIC implementation includes a substrate connection that should follow the manufacturer's guidance when a guard trace is present.
Typical applications include precision audio and instrumentation amplifiers, low-level sensor conditioning, bridge-sensor signal chains, laboratory measurement equipment, and low-noise buffer stages. Its precision-oriented design is useful when offset, drift, and input noise can affect measurement accuracy even if the processed signal bandwidth remains below the 1.5 MHz gain-bandwidth limit.
PCB implementation should preserve the manufacturer's input and output layout guidance, maintain short feedback paths, and route sensitive input nodes away from switching circuitry. Designers must also connect the substrate pin as directed by the manufacturer datasheet, especially where an exposed guard trace is used, and verify supply-decoupling requirements under the intended operating conditions.
This product record combines the manufacturer electrical specifications with packaging details, practical circuit guidance, lifecycle context, and confirmed same-package replacement information. It also identifies the important limits between a true pin-compatible replacement and a merely similar precision amplifier, helping engineers make a defensible drop-in decision.
Alternatif penggantian untuk OPA124UA — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian OPA124UA (sama faktor bentuk dan footprint) — berbeda di dalam Supply Voltage Range.
OPA124UAE4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
OPA124UAG4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
OPA124UA Rating Maksimal & Karakteristik Listrik
| Amplifier Type | Single-circuit operational amplifier |
| Kategori | General-purpose precision amplifier |
| Gain-Bandwidth Product | 1.5 MHz |
| Slew Rate | 1.6 V/us |
| Supply Voltage Range | ±5 V to ±18 V |
| Number of Amplifiers | 1 circuit |
| Paket | 8-pin SOIC |
| Package Width | 0.154 inch (3.90 mm) |
| Tipe Mounting | Surface mount |
| Input Architecture | Precision DIFET cascode |
| Offset Trim Technology | Laser-trimmed thin-film resistors |
| Substrate Connection | Pin 8 substrate connection |
| Input Noise Susceptibility | Reduced flicker-noise susceptibility |
Konfigurasi Pin OPA124UA
| Pin produk 1 | NC — Not connected per the OPA124 family pin configuration |
| Pin produk 2 | IN- — Inverting input |
| Pin produk 3 | IN+ — Noninverting input |
| Pin produk 4 | V- — Negative supply connection |
| Pin produk 5 | NC — Not connected per the OPA124 family pin configuration |
| Pin produk 6 | OUT — Operational-amplifier output |
| Pin produk 7 | V+ — Positive supply connection |
| Pin produk 8 | SUB — Substrate connection; connect according to the manufacturer datasheet guidance |
Aplikasi Umum
OPA124UA cocok untuk 6 aplikasis: Precision Sensor Signal Conditioning, Audio Preamplifier, Bridge Sensor Measurement, Laboratory Instrumentation, High-Impedance Buffer, Industrial Process Control.
Precision Sensor Signal Conditioning
OPA124UA is appropriate for conditioning low-level sensor outputs where accuracy, low input noise, and offset stability are more important than high bandwidth. Its 1.5 MHz gain-bandwidth product can support signal chains operating well below that limit, while the 1.6 V/us slew rate preserves large-signal response for moderately fast sensor transients. The manufacturer describes the input stage as a precision DIFET cascode designed to improve input precision and reduce flicker-noise susceptibility. Place the amplifier close to the sensor or bridge network, route the differential input as a compact pair, and keep high-current and switching paths away from the input nodes.
Direkomendasikan
Audio Preamplifier
OPA124UA can serve in an audio preamplifier or low-level buffer when the design prioritizes low noise and precision over wideband operation. The 1.5 MHz gain-bandwidth product is ample for many audio-band signal paths, and the 1.6 V/us slew rate helps maintain clean response through transitions in the program material. Its laser-trimmed thin-film resistors support repeatable offset behavior, while the cascode DIFET input stage reduces flicker-noise susceptibility. Feedback components should be placed directly around the amplifier, and the input return path should use a quiet reference to avoid adding noise that would dominate a high-gain audio stage.
Direkomendasikan
Bridge Sensor Measurement
OPA124UA is useful in bridge-sensor measurement circuits because its precision input architecture, low-noise behavior, and moderate 1.5 MHz bandwidth suit millivolt-level differential signals. The 1.6 V/us slew rate allows the amplifier to respond to rapid input changes without becoming the limiting element in a practical bridge circuit. Laser trimming of the internal thin-film resistors helps maintain production consistency in gain and offset behavior. Use a symmetrical input layout, provide a low-noise reference for the noninverting input, and follow the manufacturer pin guidance for the substrate connection to minimize coupling into the sensitive measurement node.
Direkomendasikan
Laboratory Instrumentation
OPA124UA fits laboratory instrumentation requiring a precise, low-noise amplifier for source monitoring, buffer, or gain stages. Its 1.5 MHz gain-bandwidth product provides useful bandwidth for many sensor and source-measurement systems, while the 1.6 V/us slew rate supports clean settling after input changes. The manufacturer emphasizes high-precision input specifications, reduced flicker-noise susceptibility, and laser-trimmed thin-film resistors as central benefits of the OPA124 architecture. Keep the signal path away from digital switching nodes, use short ground returns, and verify settling behavior with the actual source impedance and feedback network.
Direkomendasikan
High-Impedance Buffer
OPA124UA can be used as a high-impedance buffer when preserving the integrity of a sensitive source is the main objective. Its low-noise precision input stage reduces added signal disturbance, and its 1.5 MHz gain-bandwidth product is suitable for moderate-bandwidth buffers rather than ultrafast edge-rate tasks. The 1.6 V/us slew rate provides a practical upper bound for output transitions. Maintain short feedback routing, avoid capacitance on the high-impedance input, and provide a clean local ground reference. The substrate connection should follow the manufacturer guidance so the package does not introduce avoidable coupling into the buffered signal.
Direkomendasikan
Industrial Process Control
OPA124UA is suitable for slow industrial process-control loops where the measured signal requires precision but the closed-loop bandwidth can remain below 1.5 MHz. The cascode DIFET input architecture, laser-trimmed resistors, and reduced flicker-noise susceptibility support stable amplification of low-level process signals. The 1.6 V/us slew rate also gives adequate dynamic response for many pressure, temperature, and position signals after suitable filtering. Keep the analog input away from motor, relay, and switching-supply traces, use a single-point ground strategy where practical, and verify that the selected replacement ordering preserves the required electrical and qualification characteristics.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk OPA124UA — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | OPA124UAE4 | OPA124UAG4 |
|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Count | 1 | 1 | 1 |
| Input Architecture | Precision DIFET cascode | OPA124 family precision DIFET architecture | OPA124 family precision DIFET architecture |
| Substrate Connection | Pin 8 substrate connection | Pin 8 substrate connection | Pin 8 substrate connection |
| Mounting Type | Surface mount | Surface mount | Surface mount |
Diferensiator Kunci
- Pin-compatible OPA124 family replacement with matching package architecture (vsOPA124UAE4)
- Direct ordering path within the original product family (vsOPA124UAG4)
- Supports a wider supply envelope than the LMC6001 replacement candidate (vsLMC6001)
Catatan Desain
Route the differential input as a compact, symmetric pair and keep the amplifier feedback components close to their corresponding pins. High-value or high-impedance input nodes should remain physically separated from switching nodes, relay contacts, power inductors, and fast digital clock lines. This separation matters because OPA124UA is intended for low-noise precision measurements, where additional PCB coupling can overwhelm the useful input signal before the amplifier's own noise contribution is considered.
Treat pin 8 as the manufacturer-defined substrate connection rather than as an unused package lead. The Texas Instruments forum discussion identifies pin 8 as a substrate pin that may connect to a guard trace or ground. Preserve that arrangement on a replacement board and avoid routing sensitive input signals immediately beneath or adjacent to the substrate connection. Confirm the final land pattern and connection against the current manufacturer datasheet before fabrication.
Do not substitute a precision amplifier based only on noise, bandwidth, or package count. LMC6001 is suggested by Texas Instruments as a replacement for OPA124UA, but its ±8 V absolute maximum supply is substantially below OPA124UA's ±18 V limit. OPA140AID also presents a substrate-pin difference. Compare supply limits, common-mode range, offset, drift, noise, stability, and exact terminal assignments before approving a cross-family replacement.
Use a stable, low-noise supply arrangement and follow the manufacturer recommendations for bypassing and supply connections. Although OPA124UA operates from ±5 V to ±18 V, the usable signal range can be narrower than the absolute supply capability when output swing, input common-mode limits, and load requirements are considered. Verify those limits against the actual circuit, particularly for low-voltage, high-gain, or single-ended operation.
Informasi Konformitas
The OPA124 family is an obsolete precision operational amplifier. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not present in the retrieved source material.