Texas Instruments

OPA124UA - 1.5MHz Precision Low-Noise Op Amp | Texas Instruments

MPN: OPA124UA ✗ اختتامِ زندگی
±5 V to ±18 V Vdss 8-pin SOIC Package
MOQ: 1 |

OPA124UA جائزہ

The Texas Instruments OPA124UA is a single-circuit precision operational amplifier with a 1.5 MHz gain-bandwidth product, 1.6 V/us slew rate, and operation from ±5 V to ±18 V, housed in an 8-pin SOIC package. The device combines a low-noise DIFET input stage with laser-trimmed thin-film resistors for accurate offset and drift performance. Its 0.154-inch-wide, 3.90 mm SOIC package supports surface-mount assembly on precision analog and instrumentation circuits.

An operational amplifier is a high-gain, differential-input analog amplifier used to amplify voltage differences. Within the broader semiconductor hierarchy, it belongs to the operational-amplifier class, analog IC category, and signal-conditioning family. OPA124UA provides closed-loop gain and signal-conditioning functions where low noise, precision, and moderate bandwidth are more important than high-speed operation.

Key features include a 1.5 MHz gain-bandwidth product, 1.6 V/us slew rate, and a supply range of ±5 V to ±18 V. The manufacturer describes the OPA124 as a low-noise precision DIFET operational amplifier whose cascode design improves input precision and reduces susceptibility to flicker noise. Laser trimming of thin-film resistors provides stable offset and drift characteristics across production variations.

OPA124UA uses a cascode input architecture to combine low-voltage noise with precision input characteristics. Its 1.5 MHz bandwidth supports audio-frequency and general instrumentation signals, while the 1.6 V/us slew rate provides adequate response for slowly varying control and measurement signals. The 8-pin SOIC implementation includes a substrate connection that should follow the manufacturer's guidance when a guard trace is present.

Typical applications include precision audio and instrumentation amplifiers, low-level sensor conditioning, bridge-sensor signal chains, laboratory measurement equipment, and low-noise buffer stages. Its precision-oriented design is useful when offset, drift, and input noise can affect measurement accuracy even if the processed signal bandwidth remains below the 1.5 MHz gain-bandwidth limit.

PCB implementation should preserve the manufacturer's input and output layout guidance, maintain short feedback paths, and route sensitive input nodes away from switching circuitry. Designers must also connect the substrate pin as directed by the manufacturer datasheet, especially where an exposed guard trace is used, and verify supply-decoupling requirements under the intended operating conditions.

This product record combines the manufacturer electrical specifications with packaging details, practical circuit guidance, lifecycle context, and confirmed same-package replacement information. It also identifies the important limits between a true pin-compatible replacement and a merely similar precision amplifier, helping engineers make a defensible drop-in decision.

کے لیے ڈراپ اِن متبادل OPA124UA — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں OPA124UA (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Supply Voltage Range.

Texas Instruments
Supply Voltage Range: 10 V to 36 V
موازنہ کریں OPA124UA →

OPA124UAE4

✅ ڈراپ-اِن
📦 8-SOIC
Same 8-SOIC terminals and principal OPA124 performance characteristics; suffix-specific production and qualification details require confirmation.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

OPA124UAG4

✅ ڈراپ-اِن
📦 8-SOIC
Same OPA124 8-SOIC family construction; exact orderable qualification and lifecycle status differ and require confirmation.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

OPA124UA زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Single-circuit operational amplifier
زمرہ General-purpose precision amplifier
Gain-Bandwidth Product 1.5 MHz
Slew Rate 1.6 V/us
Supply Voltage Range ±5 V to ±18 V
Number of Amplifiers 1 circuit
پیکیج 8-pin SOIC
Package Width 0.154 inch (3.90 mm)
ماؤنٹنگ ٹائپ Surface mount
Input Architecture Precision DIFET cascode
Offset Trim Technology Laser-trimmed thin-film resistors
Substrate Connection Pin 8 substrate connection
Input Noise Susceptibility Reduced flicker-noise susceptibility

OPA124UA پن کنفیگریشن

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
پن 1 NC — Not connected per the OPA124 family pin configuration
پن 2 IN- — Inverting input
پن 3 IN+ — Noninverting input
پن 4 V- — Negative supply connection
پن 5 NC — Not connected per the OPA124 family pin configuration
پن 6 OUT — Operational-amplifier output
پن 7 V+ — Positive supply connection
پن 8 SUB — Substrate connection; connect according to the manufacturer datasheet guidance

عام استعمالات

OPA124UA کے لیے موزوں ہے 6 ایپلیکیشنs: Precision Sensor Signal Conditioning, Audio Preamplifier, Bridge Sensor Measurement, Laboratory Instrumentation, High-Impedance Buffer, Industrial Process Control.

🏭

Precision Sensor Signal Conditioning

OPA124UA is appropriate for conditioning low-level sensor outputs where accuracy, low input noise, and offset stability are more important than high bandwidth. Its 1.5 MHz gain-bandwidth product can support signal chains operating well below that limit, while the 1.6 V/us slew rate preserves large-signal response for moderately fast sensor transients. The manufacturer describes the input stage as a precision DIFET cascode designed to improve input precision and reduce flicker-noise susceptibility. Place the amplifier close to the sensor or bridge network, route the differential input as a compact pair, and keep high-current and switching paths away from the input nodes.

🎧

Audio Preamplifier

OPA124UA can serve in an audio preamplifier or low-level buffer when the design prioritizes low noise and precision over wideband operation. The 1.5 MHz gain-bandwidth product is ample for many audio-band signal paths, and the 1.6 V/us slew rate helps maintain clean response through transitions in the program material. Its laser-trimmed thin-film resistors support repeatable offset behavior, while the cascode DIFET input stage reduces flicker-noise susceptibility. Feedback components should be placed directly around the amplifier, and the input return path should use a quiet reference to avoid adding noise that would dominate a high-gain audio stage.

🖥️

Bridge Sensor Measurement

OPA124UA is useful in bridge-sensor measurement circuits because its precision input architecture, low-noise behavior, and moderate 1.5 MHz bandwidth suit millivolt-level differential signals. The 1.6 V/us slew rate allows the amplifier to respond to rapid input changes without becoming the limiting element in a practical bridge circuit. Laser trimming of the internal thin-film resistors helps maintain production consistency in gain and offset behavior. Use a symmetrical input layout, provide a low-noise reference for the noninverting input, and follow the manufacturer pin guidance for the substrate connection to minimize coupling into the sensitive measurement node.

🔧

Laboratory Instrumentation

OPA124UA fits laboratory instrumentation requiring a precise, low-noise amplifier for source monitoring, buffer, or gain stages. Its 1.5 MHz gain-bandwidth product provides useful bandwidth for many sensor and source-measurement systems, while the 1.6 V/us slew rate supports clean settling after input changes. The manufacturer emphasizes high-precision input specifications, reduced flicker-noise susceptibility, and laser-trimmed thin-film resistors as central benefits of the OPA124 architecture. Keep the signal path away from digital switching nodes, use short ground returns, and verify settling behavior with the actual source impedance and feedback network.

📡

High-Impedance Buffer

OPA124UA can be used as a high-impedance buffer when preserving the integrity of a sensitive source is the main objective. Its low-noise precision input stage reduces added signal disturbance, and its 1.5 MHz gain-bandwidth product is suitable for moderate-bandwidth buffers rather than ultrafast edge-rate tasks. The 1.6 V/us slew rate provides a practical upper bound for output transitions. Maintain short feedback routing, avoid capacitance on the high-impedance input, and provide a clean local ground reference. The substrate connection should follow the manufacturer guidance so the package does not introduce avoidable coupling into the buffered signal.

🏭

Industrial Process Control

OPA124UA is suitable for slow industrial process-control loops where the measured signal requires precision but the closed-loop bandwidth can remain below 1.5 MHz. The cascode DIFET input architecture, laser-trimmed resistors, and reduced flicker-noise susceptibility support stable amplification of low-level process signals. The 1.6 V/us slew rate also gives adequate dynamic response for many pressure, temperature, and position signals after suitable filtering. Keep the analog input away from motor, relay, and switching-supply traces, use a single-point ground strategy where practical, and verify that the selected replacement ordering preserves the required electrical and qualification characteristics.

تجویز کردہ پروڈکٹس کا خلاصہ

OPA124UA Texas Instruments استعمال ہوتا ہے: Precision Sensor Signal Conditioning, Audio Preamplifier, Bridge Sensor Measurement, Laboratory Instrumentation, High-Impedance Buffer, Industrial Process Control AD711 similar precision amplifier referenced in the cross-reference material استعمال ہوتا ہے: Precision Sensor Signal Conditioning, Bridge Sensor Measurement, Industrial Process Control LT1001 precision amplifier referenced in the cross-reference material استعمال ہوتا ہے: Precision Sensor Signal Conditioning, Bridge Sensor Measurement, High-Impedance Buffer OPA124U Texas Instruments استعمال ہوتا ہے: Audio Preamplifier, High-Impedance Buffer OPA124UAE4 same-family SOIC replacement استعمال ہوتا ہے: Audio Preamplifier, Laboratory Instrumentation, Industrial Process Control OPA124UAG4 same-family SOIC replacement استعمال ہوتا ہے: Laboratory Instrumentation
What are the key specifications of OPA124UA that engineers should know?
OPA124UA is a single precision operational amplifier with a 1.5 MHz gain-bandwidth product, 1.6 V/us slew rate, and a ±5 V to ±18 V supply range. According to the manufacturer datasheet, it uses a low-noise precision DIFET cascode architecture, laser-trimmed thin-film resistors, and reduced flicker-noise susceptibility. It is offered in an 8-pin SOIC package for surface-mount instrumentation and signal-conditioning designs.
Where can I download the OPA124UA datasheet PDF?
The OPA124UA manufacturer datasheet can be downloaded from the Texas Instruments PDF linked on this page. The document identifies OPA124UA as a low-noise precision DIFET operational amplifier available in 8-pin PDIP and SOIC packages. For PCB work, use the package drawing and pin-description table in that datasheet, especially the guidance for the substrate connection on pin 8.
Where can I find the OPA124UA pinout and package details?
OPA124UA uses an 8-pin SOIC package measuring 0.154 inch, or 3.90 mm, in width. The manufacturer datasheet identifies pin 8 as the substrate connection and specifies connecting it to a guard trace when one is present or to ground otherwise. Use the datasheet pin-description table and land pattern when assigning tracks and checking polarity.
Is OPA124UA suitable for precision instrumentation?
OPA124UA is suitable for precision instrumentation because its 1.5 MHz gain-bandwidth product, 1.6 V/us slew rate, low-noise DIFET architecture, and laser-trimmed thin-film resistors support accurate amplification of low-level signals. According to the manufacturer datasheet, the cascode design improves input precision and reduces susceptibility to flicker noise, making the device appropriate for sensor conditioning and measurement circuits operating within its bandwidth range.
OPA124UA vs OPA124UAE4 - which is better for a new design?
OPA124UAE4 is the direct same-package replacement for OPA124UA in the published comparison, with consistent terminals, package, and principal performance characteristics. The manufacturer datasheet applies to the OPA124 family, while the exact orderable suffix should be checked for qualification, temperature grade, and production status. For new production, choose the orderable suffix supported for the required grade and supply plan.
What is the best drop-in replacement for OPA124UA?
OPA124UAE4 is a confirmed same-package drop-in candidate because the published comparison identifies consistent terminals and package characteristics with OPA124UA. OPA124UAG4 is another family ordering identified in the replacement search, but its exact orderable status and suffix-specific qualification should be checked. The Texas Instruments forum identifies LMC6001 as a suggested replacement, but its ±8 V maximum supply is substantially lower than OPA124UA's ±18 V limit, so it is not a direct drop-in choice.
Can OPA124UAE4 replace OPA124UA without PCB changes?
OPA124UAE4 can replace OPA124UA in the same SOIC footprint because the published comparison describes the terminals and package as consistent. Before substitution, verify the required temperature grade, qualification status, offset limits, and supply behavior against the design requirements. The OPA124 family datasheet remains the controlling document for electrical limits and layout guidance.
What can replace OPA124UA?
OPA124UAE4 is the strongest confirmed replacement in the available cross-reference material because it is described as having consistent terminals and package characteristics. OPA124UAG4 is also identified within the OPA124 family. Other named parts require stricter engineering review: LMC6001 has a lower ±8 V maximum supply, and OPA140AID differs in substrate-pin implementation, so neither should be treated as an automatic drop-in replacement.
When should I choose OPA124UA over LMC6001?
Choose OPA124UA when the circuit requires operation above the LMC6001's ±8 V absolute maximum supply or depends on the OPA124 family's specified precision behavior. According to the Texas Instruments forum discussion, the LMC6001 is a suggested replacement but has a ±8 V absolute maximum supply, compared with OPA124UA's ±18 V maximum. A PCB-compatible LMC6001 configuration is therefore suitable only when its full electrical limits satisfy the design.
Is OPA124UA the same as OPA124UAG4?
OPA124UA and OPA124UAG4 belong to the same OPA124 family and use an 8-pin SOIC format, but an ordering suffix can encode production and qualification details. The family-level architecture remains a 1.5 MHz precision DIFET operational amplifier. Review the exact suffix specifications and lifecycle status before treating the two orderable designations as interchangeable in a new production design.
Where can I buy OPA124UA online?
Use the Request a Quote form on this page to request current OPA124UA availability, minimum order quantity, and lead time. Because OPA124UA is listed as obsolete, requesters should explicitly confirm lifecycle status, remaining inventory, traceability documentation, and whether an approved alternate is acceptable. The form provides a direct purchasing route without relying on potentially stale catalog availability.
What is the price of OPA124UA?
Current OPA124UA commercial terms should be requested through the Request a Quote form on this page. Since the OPA124 family is identified as obsolete, pricing can depend on remaining factory inventory, date code, traceability, quantity, and whether a supported alternate is requested. The structured catalog price shown on this page should be used only as a non-binding historical reference.
What is the lead time and stock status for OPA124UA?
Request the current stock position, minimum order quantity, and lead time for OPA124UA through the Request a Quote form on this page. The obsolete lifecycle status means no continuing-production schedule should be assumed, and available factory inventory may be limited or allocated. A quote response should confirm quantity, date code, traceability, and any authorized lifecycle-change documentation.
Why does the OPA124UA substrate pin need careful PCB handling?
The OPA124UA substrate connection requires careful PCB handling because the Texas Instruments forum discussion identifies pin 8 as a substrate connection rather than an ordinary functional pin. According to that discussion and the family datasheet guidance, connect it to a guard trace when one is present and to ground otherwise. Preserving the intended connection helps minimize substrate-related coupling in sensitive circuitry.
What design trade-offs matter when replacing OPA124UA?
The replacement decision must address package pins, supply limits, bandwidth, slew rate, noise, offset, drift, qualification, and lifecycle rather than relying on the generic term precision amplifier. OPA124UA combines a 1.5 MHz gain-bandwidth product with 1.6 V/us slew rate and a ±5 V to ±18 V operating range. Review the manufacturer datasheet and compare every parameter that can affect signal accuracy, noise, stability, and production continuity.

کے لیے انجینئرنگ ریفرنس ڈیٹا OPA124UA — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose OPA124UA when an existing precision circuit needs the established OPA124 performance, including its 1.5 MHz gain-bandwidth product, 1.6 V/us slew rate, precision DIFET input stage, and ±5 V to ±18 V supply range. OPA124UAE4 is the preferred same-package candidate when the published terminal and package compatibility is sufficient and the exact suffix remains acceptable for production. OPA124UAG4 is another family option, but its ordering and lifecycle details should be confirmed. LMC6001 may be appropriate only when the circuit remains safely below its ±8 V absolute maximum supply and all other electrical parameters pass review. OPA140AID should not be treated as a direct replacement without resolving its substrate-pin difference. For every alternate, verify pin names, common-mode range, output swing, offset, drift, noise, stability, qualification, and lifecycle before approving a substitution.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ OPA124UAE4 OPA124UAG4
Package 8-SOIC 8-SOIC 8-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments
Amplifier Count 1 1 1
Input Architecture Precision DIFET cascode OPA124 family precision DIFET architecture OPA124 family precision DIFET architecture
Substrate Connection Pin 8 substrate connection Pin 8 substrate connection Pin 8 substrate connection
Mounting Type Surface mount Surface mount Surface mount

اہم امتیازی خصوصیات

  • Pin-compatible OPA124 family replacement with matching package architecture (بمقابلہOPA124UAE4)
  • Direct ordering path within the original product family (بمقابلہOPA124UAG4)
  • Supports a wider supply envelope than the LMC6001 replacement candidate (بمقابلہLMC6001)

ڈیزائن نوٹس

Route the differential input as a compact, symmetric pair and keep the amplifier feedback components close to their corresponding pins. High-value or high-impedance input nodes should remain physically separated from switching nodes, relay contacts, power inductors, and fast digital clock lines. This separation matters because OPA124UA is intended for low-noise precision measurements, where additional PCB coupling can overwhelm the useful input signal before the amplifier's own noise contribution is considered.

Treat pin 8 as the manufacturer-defined substrate connection rather than as an unused package lead. The Texas Instruments forum discussion identifies pin 8 as a substrate pin that may connect to a guard trace or ground. Preserve that arrangement on a replacement board and avoid routing sensitive input signals immediately beneath or adjacent to the substrate connection. Confirm the final land pattern and connection against the current manufacturer datasheet before fabrication.

Do not substitute a precision amplifier based only on noise, bandwidth, or package count. LMC6001 is suggested by Texas Instruments as a replacement for OPA124UA, but its ±8 V absolute maximum supply is substantially below OPA124UA's ±18 V limit. OPA140AID also presents a substrate-pin difference. Compare supply limits, common-mode range, offset, drift, noise, stability, and exact terminal assignments before approving a cross-family replacement.

Use a stable, low-noise supply arrangement and follow the manufacturer recommendations for bypassing and supply connections. Although OPA124UA operates from ±5 V to ±18 V, the usable signal range can be narrower than the absolute supply capability when output swing, input common-mode limits, and load requirements are considered. Verify those limits against the actual circuit, particularly for low-voltage, high-gain, or single-ended operation.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The OPA124 family is an obsolete precision operational amplifier. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not present in the retrieved source material.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-19 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

opa124u datasheet OPA124UA datasheet OPA124UA pinout OPA124UA datasheet pdf OPA124UA 8-SOIC pinout OPA124UA equivalent OPA124UA replacement OPA124UA drop-in replacement OPA124UA cross reference OPA124UA vs OPA124UAE4 OPA124UA vs LMC6001 Texas Instruments OPA124UA OPA124UA price OPA124UA stock

متعلقہ اجزاء اور اصطلاحات

Texas Instruments OPA124UA OPA124UAE4 OPA124UAG4 OPA124U LMC6001 OPA140AID AD711 LT1001 operational amplifier precision operational amplifier analog IC signal conditioner DIFET cascode input architecture gain-bandwidth product slew rate input offset voltage input bias current equivalent input noise voltage flicker noise laser-trimmed thin-film resistors 8-SOIC SOIC surface mount precision instrumentation audio preamplifier bridge sensor measurement process control
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں