Texas Instruments

OPA317ID - Low-Offset Precision Op Amp | Texas Instruments

MPN: OPA317ID ✓ Aktif
90 µV Vdss 35 µA Id 8-pin SOIC Package
MOQ: 1 |

OPA317ID Ringkasan

Texas Instruments OPA317ID is a single-channel, low-offset, rail-to-rail input and output CMOS operational amplifier in an 8-pin SOIC package. It combines a maximum input offset voltage of 90 µV with a maximum quiescent current of 35 µA, making it suitable for precision measurement and low-power signal-chain designs. The OPA317ID is specified for operation from 40°C to 125°C and is supported by the manufacturer's OPA317 family documentation.

A precision operational amplifier is a voltage-feedback amplifier designed to amplify the difference between two input voltages while minimizing offset, bias-current, and temperature-related errors. The OPA317 belongs to the Zerø-Drift amplifier family and uses proprietary autocalibration technology to maintain low offset over time and temperature. In the system hierarchy, it is a CMOS operational amplifier within the broader category of analog amplifiers and signal-chain ICs.

The primary feature of the OPA317ID is its low input offset voltage, specified at no more than 90 µV. This limits the output error generated when the two amplifier inputs are at nearly equal voltages. Its maximum quiescent current of 35 µA also reduces the supply current consumed by the amplifier itself, making the device relevant to battery-powered instruments, portable sensors, and precision acquisition systems where amplifier power can materially affect system energy use.

Rail-to-rail input and output operation allows the amplifier to process signals close to the supply rails and provides greater usable input and output range than a conventional amplifier with restricted common-mode or output swing. The CMOS implementation supports low quiescent current, while the Zerø-Drift architecture targets stable precision performance across changing temperature and time. Engineers should still verify the exact supply, common-mode, output-swing, noise, bandwidth, and current limits against the manufacturer datasheet for the operating conditions of the finished circuit.

Typical uses include bridge-amplifier inputs, strain-gauge and pressure-sensor signal paths, low-current sensor interfaces, precision current measurement, battery-powered instrumentation, and low-level analog signal conditioning. In these applications, the 90 µV maximum offset specification helps constrain systematic error, while the 35 µA maximum quiescent current limits amplifier overhead. The SOIC-8 package supports conventional surface-mount assembly and is appropriate for designs that require a single amplifier with rail-to-rail signal range.

Layout should keep input traces short, place the input-bias or feedback network close to the amplifier, and route sensitive input signals away from switching nodes and high-current return paths. Bypass each supply pin as indicated by the manufacturer layout guidance, and use grounded guarding around precision inputs when leakage from PCB contamination or flux residue could otherwise influence bias current. Confirm the chosen SOIC-8 land pattern and assembly requirements before releasing the PCB footprint.

This product record combines the manufacturer description, ordering information, package details, operating-temperature information, and cross-reference resources into an engineering-focused selection guide. It also distinguishes a true same-package family alternative from the many amplifier options that are only functionally similar and therefore may require different biasing, compensation, decoupling, or verification.

Alternatif penggantian untuk OPA317ID — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

OPA317IDR

✅ Drop-In
📦 8-pin SOIC
Electrical ratings remain 90 µV maximum offset and 35 µA maximum quiescent current; the orderable packing format differs by 0 electrical percentage points.

📋 Alternatif referensi (tidak dalam katalog)

OPA317ID Rating Maksimal & Karakteristik Listrik

Product Type Low-offset, rail-to-rail input/output CMOS operational amplifier
Amplifier Type Single-channel voltage-feedback operational amplifier
Architecture Proprietary autocalibration Zerø-Drift
Maximum Input Offset Voltage 90 µV
Maximum Quiescent Current 35 µA
Rentang Suhu Kerja 40°C to 125°C
Paket 8-pin SOIC
Tipe Mounting Surface mount

OPA317ID 8-pin soic Diamant Konfigurasi Panduan

Konfigurasi pin untuk OPA317ID (8-pin soic pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 8-pin soic untuk OPA317ID

Tidak ada data diatribut pin yang tersedia untuk OPA317ID.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

OPA317ID cocok untuk 6 aplikasis: Low-Power Bridge Amplifier, Battery-Powered Sensor Interface, Precision Current Measurement, Low-Level Signal Conditioning, Precision Data Acquisition Front End, Environmental and Process Monitoring.

🔧

Low-Power Bridge Amplifier

The OPA317ID is suitable for conditioning differential outputs from resistive bridge sensors such as pressure, force, and strain gauges. Its maximum input offset voltage of 90 µV limits the systematic input-referred error that can become significant when the bridge excitation and full-scale sensor output are small. The low maximum quiescent current of 35 µA also helps preserve battery life in portable test equipment. Place the amplifier close to the bridge and use short, guarded input traces to minimize leakage and thermal gradients. Feedback and gain-setting resistors should be positioned to maintain low parasitic capacitance. Confirm the exact input common-mode range, output swing, and gain-bandwidth limits against the manufacturer datasheet for the selected bridge excitation and gain.

🔧

Battery-Powered Sensor Interface

OPA317ID can serve as the precision gain stage in a battery-powered sensor interface because it combines rail-to-rail input and output operation with a maximum quiescent current of 35 µA. These characteristics are useful when a sensor produces a signal near one of the supply rails and when every microampere affects operating time. The amplifier's maximum 90 µV offset can be important for slow, low-level measurements where input-referred error changes the interpreted sensor value. Use a low-leakage PCB surface and clean assembly practices around high-impedance inputs. The complete current budget should include sensor excitation, reference circuitry, and any pull-up or pull-down networks rather than considering only the OPA317ID quiescent current.

🔧

Precision Current Measurement

The OPA317ID fits a precision current-measurement amplifier when the shunt voltage is small and measurement accuracy depends on low offset. Its 90 µV maximum input offset specification helps limit the voltage error introduced at the amplifier input before gain and analog-to-digital conversion. The 35 µA maximum quiescent current is beneficial in portable multimeters, laboratory instruments, and energy-monitoring equipment. Place the amplifier adjacent to the shunt or current-sense node so the sensitive input does not pick up board-level noise. Verify common-mode limits when the shunt is placed on a high-side supply rail, and check output-swing requirements for the chosen shunt current and reference voltage.

🔧

Low-Level Signal Conditioning

OPA317ID is appropriate for low-level analog signal conditioning when the desired result depends on accurate difference amplification rather than maximum bandwidth. The Texas Instruments OPA317 family uses proprietary autocalibration to achieve low offset over time and temperature, with the OPA317ID specified at no more than 90 µV. This can improve repeatability in instrumentation, biomedical-adjacent measurement, and laboratory sensor interfaces. Configure the feedback network according to the required closed-loop gain and verify stability with the manufacturer application guidance. Keep input and feedback nodes compact and avoid routing them beneath digital clocks, display drivers, or switching-regulator components that could inject correlated disturbance.

🔧

Precision Data Acquisition Front End

OPA317ID can amplify a sensor output before an ADC in a precision data-acquisition system. The single-channel amplifier provides rail-to-rail input and output behavior, a maximum offset voltage of 90 µV, and a maximum quiescent current of 35 µA, allowing an engineer to balance input-referred accuracy against power consumption. This balance is useful in compact measurement instruments where the analog front end must operate near the converter's input range. The analog and digital grounds should meet at a controlled location, while the amplifier input should be driven from a low-impedance source. Before implementation, confirm gain-bandwidth, slew rate, output swing, and settling behavior against the ADC sampling requirements.

🔧

Environmental and Process Monitoring

OPA317ID is suitable for slow industrial or environmental monitoring loops that measure temperature, humidity, gas, or liquid level through resistive or bridge sensors. Its low offset can reduce fixed measurement error, and the 35 µA maximum quiescent current supports long-duration, battery-assisted field monitoring. The 8-pin SOIC package is straightforward to assemble in conventional surface-mount hardware and remains usable across the manufacturer's stated 40°C to 125°C operating range. Use the device close to the sensing element where cable pickup could otherwise dominate the error. Apply protection networks for exposed sensor lines, and ensure that leakage through protection components does not compromise input bias current or signal accuracy.

What are the key specifications of OPA317ID that engineers should know?
The OPA317ID is a single-channel, low-offset, rail-to-rail input/output CMOS operational amplifier with a maximum offset voltage of 90 µV and maximum quiescent current of 35 µA. According to the Texas Instruments OPA317 product page, it uses proprietary autocalibration technology to maintain low offset over time and temperature. The device is offered in an 8-pin SOIC package and is specified for operation from 40°C to 125°C.
Where can I download the OPA317ID datasheet PDF?
The official OPA317ID documentation is available through the Texas Instruments OPA317 product page and the linked part-details page. The manufacturer page identifies OPA317ID as the SOIC-8 orderable version of the OPA317 series. Use the manufacturer PDF for the authoritative pin configuration, electrical limits, recommended application circuit, package drawings, and operating details.
Where can I find the OPA317ID pinout?
The OPA317ID pinout is found in the manufacturer datasheet for the OPA317 series and on the Texas Instruments OPA317ID part-details page. The device uses an 8-pin SOIC package. Use the pin-description and package-drawing sections to assign supply, input, output, and no-connect pins before laying out the PCB.
What is the OPA317ID input offset voltage?
The OPA317ID has a maximum input offset voltage of 90 µV. According to the Texas Instruments OPA317 product description, its Zerø-Drift architecture uses proprietary autocalibration to preserve low offset over time and temperature. This makes the amplifier suitable for low-level sensor signals, bridge amplifiers, and precision current-measurement circuits where amplifier offset contributes directly to measurement error.
How much quiescent current does the OPA317ID consume?
The OPA317ID consumes no more than 35 µA of quiescent current. According to the Texas Instruments OPA317 product page, this low current accompanies its precision architecture and supports low-power signal-chain designs. The specification describes current with no signal applied, so a complete battery-life calculation should also include load-dependent current, output-stage activity, and the current drawn by external bias or feedback networks.
Is the OPA317ID suitable for battery-powered sensor applications?
Yes, the OPA317ID is well suited to low-power sensor-front-end designs because its maximum quiescent current is 35 µA and its maximum input offset voltage is 90 µV. The Texas Instruments OPA317 family documentation identifies it as a low-offset CMOS amplifier. Battery suitability still depends on the selected supply voltage, sensor output range, required bandwidth, and total circuit current.
OPA317ID vs OPA317IDR - which is the better choice?
OPA317ID and OPA317IDR identify the same Texas Instruments OPA317 amplifier in the 8-pin SOIC package, with the principal distinction being the orderable shipping format rather than the core electrical function. Choose the ordering code that matches your assembly process and manufacturer ordering table. The manufacturer part-details page should be used to confirm reel, tube, or other packing requirements before procurement.
When should I choose the OPA317ID instead of a general-purpose operational amplifier?
Choose the OPA317ID when offset error and amplifier supply current are more important than the cost or bandwidth of a general-purpose device. Its maximum 90 µV offset and 35 µA quiescent current are useful in precision bridges, low-level sensor conditioning, and battery-operated measurements. Select a higher-bandwidth amplifier instead when the signal requires faster slew rate or wider closed-loop bandwidth.
What can replace the OPA317ID on the same PCB?
A genuine replacement must use the same 8-pin SOIC footprint and remain pin-to-pin compatible, while meeting the circuit's offset, quiescent-current, supply, input-range, output-swing, bandwidth, and noise requirements. The OPA317IDR ordering option is a same-package form of the OPA317 family, but its delivery format should be confirmed for the intended assembly process. Verify the manufacturer datasheet before releasing a substitute to production.
Is the OPA317ID the same as the OPA318ID?
No. The OPA317ID and OPA318ID are related single-channel precision amplifiers, but they are separate Texas Instruments products whose electrical characteristics and ordering information must be checked independently. The OPA317 is identified as a low-offset, low-quiescent-current Zerø-Drift amplifier with up to 90 µV offset and 35 µA quiescent current. Use the respective manufacturer datasheets to compare voltage range, bandwidth, noise, and stability.
Where can I buy OPA317ID online and request a quote?
Use the Request a Quote form on this OPA317ID page to request current availability, pricing, and lead time for the exact MPN. Confirm whether the required orderable quantity, packaging format, and delivery schedule can be met. Stock status can change, so obtain written confirmation before committing the component to a production schedule.
What is the price of OPA317ID?
The current price of OPA317ID is not stated on this page because commercial pricing and availability change frequently. Submit the exact MPN through the Request a Quote form on this page for a current quotation. The request should specify quantity, packaging, target date, and any required traceability or documentation.
What is the lead time and stock status for OPA317ID?
Current stock and lead time for OPA317ID should be confirmed through the Request a Quote form on this page. The manufacturer identifies OPA317ID as an orderable part, but that status alone does not establish available inventory or a delivery date. Include your required quantity and production schedule so the quotation can reflect the relevant supply conditions.
What is the best Texas Instruments equivalent for OPA317ID?
The closest same-family option identified for the OPA317ID is the OPA317IDR ordering variant, which retains the 8-pin SOIC footprint and the OPA317 family's 90 µV maximum offset and 35 µA maximum quiescent-current claims. Its orderable shipping format differs, so confirm that format against the assembly process. No unrelated amplifier should be treated as a drop-in without a full electrical comparison.
How should I design the PCB around the OPA317ID?
Place input, feedback, and compensation components close to their associated OPA317ID pins, and route sensitive input traces away from switching nodes and high-current paths. According to the Texas Instruments product documentation, the OPA317 is a CMOS operational amplifier in an 8-pin SOIC package. Follow the manufacturer layout and application examples for bypass placement, grounding, and feedback geometry.
What operating-temperature range applies to OPA317ID?
The OPA317ID is specified for operation from 40°C to 125°C. The OPA317 family comparison information identifies this operating range for the family versions, including the single OPA317 in SOIC-8. For a finished product, verify both the ambient operating range and the maximum junction-temperature condition using the complete manufacturer datasheet.

Data referensi engineering untuk OPA317ID — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the OPA317ID when a single amplifier must combine rail-to-rail input and output operation, a maximum offset voltage of 90 µV, and a maximum quiescent current of 35 µA. It is especially appropriate for low-level bridge sensing, precision current measurement, and battery-powered instrumentation where offset error and amplifier overhead both matter. OPA317IDR provides the same electrical family and 8-pin SOIC footprint, making it the closest identified drop-in ordering option when its delivery format suits the assembly process. A different amplifier should be selected when substantially wider bandwidth, higher slew rate, lower noise, a different common-mode range, or a different supply capability is required. Such a device may be functionally similar, but it should not be treated as a drop-in replacement unless its pinout and all circuit-critical electrical limits match. For production use, verify the final operating point against the manufacturer datasheet, including supply range, input range, output swing, stability, and thermal conditions.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini OPA317IDR
Package 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments
Product Type Single-channel low-offset rail-to-rail I/O operational amplifier Single-channel low-offset rail-to-rail I/O operational amplifier
Maximum Input Offset Voltage 90 µV 90 µV
Maximum Quiescent Current 35 µA 35 µA
Operating Temperature Range 40°C to 125°C 40°C to 125°C
Amplifier Architecture Proprietary autocalibration Zerø-Drift Proprietary autocalibration Zerø-Drift
Channel Count 1 channel 1 channel

Diferensiator Kunci

  • Very low quiescent current for a precision amplifier (vsOPA317IDR)
  • Maximum offset limited to 90 µV (vsOPA317IDR)
  • Rail-to-rail input and output operation (vsOPA317IDR)

Catatan Desain

Place the OPA317ID close to the source of the precision signal and route inputs as short traces with a continuous ground reference. Keep the feedback network close to the amplifier so parasitic resistance and capacitance do not alter the intended gain or stability. Sensitive input traces should avoid switching nodes, inductors, and the return path of high-current loads.

Apply grounded guarding when driving a high-impedance source because PCB contamination, flux residue, and moisture can create leakage paths comparable to the amplifier's bias current. Keep the area around the input pins clean and avoid long exposed copper where condensation or contamination could affect accuracy. The 35 µA maximum quiescent current makes the amplifier efficient, but it does not eliminate input-leakage concerns.

Estimated: the amplifier's supply dissipation is approximately P = VIN × IQ. Using the maximum quiescent current of 35 µA and a 5 V supply gives about 175 µW, before output current, feedback-network current, and external-circuit consumption are included. Calculate the complete rail budget separately because the amplifier may not be the dominant load in a precision measurement system.

Do not assume that low offset alone guarantees usable precision performance. Check input common-mode range, output swing, gain-bandwidth product, slew rate, noise, and stability for the selected operating point. The rail-to-rail designation does not eliminate all headroom requirements, and the 90 µV offset is a maximum limit rather than a guaranteed value for every unit.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance attributes were not stated in the referenced product information. Confirm current environmental declarations and qualification status with Texas Instruments before production release.

Pencarian Terkait

OPA317ID datasheet OPA317ID datasheet pdf OPA317ID pinout OPA317ID specifications Texas Instruments OPA317ID OPA317ID 8-SOIC OPA317ID low offset amplifier OPA317ID rail to rail OPA317ID vs OPA317IDR OPA317ID replacement OPA317ID cross reference OPA317ID application circuit OPA317ID price OPA317ID stock OPA317ID equivalent

Komponen dan Istilah Terkait

Texas Instruments OPA317ID OPA317IDR OPA317 OPA2317 OPA4317 Operational Amplifier CMOS Operational Amplifier Precision Amplifier Zerø-Drift Amplifier Rail-to-Rail Input Rail-to-Rail Output Input Offset Voltage Quiescent Current Autocalibration Common-Mode Range Gain-Bandwidth Product 8-pin SOIC SOIC Package Family Surface Mount Analog Signal Conditioning Bridge Amplifier Battery-Powered Instrumentation Precision Current Measurement 40°C to 125°C
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ