Texas Instruments

OPA338UA - 5.5V, 62.5MHz RRO Op Amp | Texas Instruments

MPN: OPA338UA ✓ Aktif
5.5 V Vdss 8-pin SOIC Package
MOQ: 1 |

OPA338UA Ringkasan

Texas Instruments OPA338UA is a single, 5.5 V, 62.5 MHz rail-to-rail-output CMOS operational amplifier packaged in an 8-pin SOIC. The device combines a 62.5 MHz gain-bandwidth product with rail-to-rail output capability, making it suitable for compact, high-speed signal-conditioning and filtering circuits.

An operational amplifier is a voltage-gain device used to amplify the difference between two input voltages. Within the amplifier hierarchy, the OPA338UA belongs to the CMOS operational-amplifier class, which combines high input impedance, low power consumption, and wide bandwidth. Its rail-to-rail output stage can approach the supply rails, improving output-voltage range in low-voltage systems where conventional output stages leave less usable signal swing.

The key operating characteristics include a single 5.5 V supply, 62.5 MHz gain-bandwidth product, rail-to-rail output operation, and a single-amplifier configuration. The 62.5 MHz bandwidth provides useful speed for signal conditioning, while the compact SOIC-8 package supports conventional surface-mount assembly. The manufacturer describes the OPA337 and OPA338 series as low-cost, miniature CMOS amplifiers intended for space-sensitive applications.

OPA338UA uses advanced CMOS technology and is designed for single-supply operation. Rail-to-rail output behavior is particularly useful when the desired output must move close to either supply rail, although the usable range at each extreme remains subject to the datasheet output-voltage and load-current limits. The OPA338 is positioned as the higher-bandwidth member relative to the closely related OPA337 family, making it more suitable for applications that need faster closed-loop response or higher-frequency filtering.

Typical uses include low-level sensor-signal amplification, active filters, communications-interface signal conditioning, portable measurement equipment, and small control or monitoring modules. The 5.5 V maximum supply suits compact systems operating from a single low-voltage rail. For battery-powered designs, the low-power CMOS implementation can help reduce system energy consumption, but quiescent current and load-current behavior should be checked against the operating conditions.

When laying out a design, place input, output, supply, and decoupling connections according to the manufacturer datasheet guidance. Use short, low-impedance routing for high-frequency signals and place bypass capacitance close to the supply pins. Confirm the source and sink current limits across the full output-voltage swing rather than assuming symmetrical performance at the rail limits.

This product page combines the OPA338UA's verified operating characteristics, package information, sourcing guidance, and engineering-focused design considerations. It also identifies the closest supported drop-in option separately from broader functional alternatives, helping engineers distinguish true footprint-compatible replacements from devices that merely perform a similar function.

Alternatif penggantian untuk OPA338UA — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

OPA337PA

✅ Drop-In
Texas Instruments
📦 8-pin SOIC
General-purpose operational amplifier (category) · 1 circuit (count) · 5.5 V · 3 MHz · Rail-to-rail output (architecture) · Single-supply operation (configuration) · FET input (architecture) · 10 pA

Kontak untuk harga

Lihat Datasheet →

OPA338UA Rating Maksimal & Karakteristik Listrik

Amplifier Type Single operational amplifier
Maximum Supply Voltage 5.5 V
Nominal Supply Voltage 5.5 V
Gain-Bandwidth Product 62.5 MHz
Tipe Output Rail-to-rail output
Paket 8-pin SOIC
Tipe Mounting Surface mount
Process Technology CMOS

Konfigurasi Pin OPA338UA

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin produk 1 NC — Not connected
Pin produk 2 IN- — Inverting input
Pin produk 3 IN+ — Non-inverting input
Pin produk 4 V- — Negative supply or ground connection
Pin produk 5 NC — Not connected
Pin produk 6 OUT — Output
Pin produk 7 V+ — Positive supply
Pin produk 8 NC — Not connected

Aplikasi Umum

OPA338UA cocok untuk 6 aplikasis: Low-Level Sensor Signal Conditioning, Active Audio Filtering, Communications Interface Conditioning, Portable Measurement Equipment, Industrial Control and Monitoring, Data Acquisition Front End.

🧩

Low-Level Sensor Signal Conditioning

OPA338UA suits low-level sensor front ends that require a single 5.5 V rail, a 62.5 MHz gain-bandwidth product, and rail-to-rail output capability. The amplifier can amplify a sensor-generated voltage before conversion by an ADC or digitization by a controller while operating from the same compact supply as the sensed system. Its single-amplifier configuration simplifies routing in space-constrained designs. Confirm that the sensor's common-mode voltage and the required output swing remain inside the manufacturer limits, and place supply bypass capacitance close to the device.

🎧

Active Audio Filtering

OPA338UA can implement active filters in compact audio and communications modules because its 62.5 MHz gain-bandwidth product provides considerably more open-loop bandwidth than the signal frequencies commonly processed by small audio boards. Rail-to-rail output operation can increase usable output swing in a single low-voltage supply arrangement, while the single SOIC-8 package simplifies board area. Filter component tolerances and op-amp noise can determine the realized cutoff and response, so simulate the complete network and check output swing at the selected load.

🌐

Communications Interface Conditioning

OPA338UA is appropriate for communications-interface signal conditioning where a low-voltage single-supply amplifier must process small-amplitude signals with higher bandwidth than typical general-purpose parts. The 62.5 MHz gain-bandwidth product supports moderate-speed amplification, while the CMOS process and small SOIC-8 footprint suit compact peripheral and communications modules. Verify the input common-mode range, output capability into the receiving circuit, and stability of the selected feedback network. Keep sensitive input routing short and return the bypass capacitor directly to the supply-reference connection.

📱

Portable Measurement Equipment

OPA338UA fits portable measurement equipment that combines low-voltage operation, analog amplification, and compact PCB area. A single 5.5 V supply reduces power-tree complexity, and the 62.5 MHz gain-bandwidth product allows the amplifier to serve functions beyond slow instrumentation buffers, including active filtering and gain stages. The rail-to-rail output architecture can improve signal range in battery-operated systems. Designers should still verify supply-current demand, input bias current against high-impedance sensors, and output settling over the required measurement bandwidth.

🏭

Industrial Control and Monitoring

OPA338UA can condition sensor and feedback signals in industrial control or monitoring modules built around a 5.5 V power rail. Its 62.5 MHz gain-bandwidth product provides response margin for fast control-loop signals, while the single-amplifier SOIC-8 package simplifies component placement in densely populated controller boards. The CMOS architecture supports low-voltage operation, but the selected operating temperature grade and electrical limits must satisfy the industrial environment. Pay particular attention to input offset, bias current, noise, and common-mode range when sourcing high-impedance sensors.

🖥️

Data Acquisition Front End

OPA338UA is suitable for a single-op-amp data-acquisition front end when the source is a low-voltage analog sensor and the design benefits from a 62.5 MHz gain-bandwidth product. It can provide gain, level shifting toward the downstream converter's range, and first-order filtering without occupying multiple amplifier packages. Rail-to-rail output behavior can help maximize signal use on a single supply. Establish the required gain and bandwidth before selecting resistor and capacitor values, then verify settling accuracy, output loading, and input-common-mode compliance in the finished acquisition chain.

What are the key specifications of OPA338UA that engineers should know?
OPA338UA is a single, 5.5 V, 62.5 MHz rail-to-rail-output CMOS operational amplifier in an 8-pin SOIC package. According to the Texas Instruments OPA338 product page and datasheet, its principal combination is a 62.5 MHz gain-bandwidth product, single-supply operation, rail-to-rail output, and a small surface-mount footprint. These characteristics make it appropriate for compact signal-conditioning, filtering, sensing, and communications-interface applications where bandwidth and usable output range are more important than very low offset voltage.
What is the operating voltage of OPA338UA?
OPA338UA operates from a single supply with a maximum stated voltage of 5.5 V. The Texas Instruments OPA338 product page identifies the device as a single, 5.5 V operational amplifier, while the manufacturer datasheet contains the detailed operating limits. Keep the actual supply below the maximum rating and verify the output swing, common-mode range, and load-current limits at the operating temperature before finalizing the power architecture.
What is the gain-bandwidth product of OPA338UA?
OPA338UA has a 62.5 MHz gain-bandwidth product. According to the Texas Instruments OPA338 product page, this bandwidth identifies the device as a relatively high-speed member of the OPA337 and OPA338 CMOS families. In a closed-loop amplifier, the operating bandwidth depends on the selected noise gain and feedback network, so use the 62.5 MHz value as a device-level gain-bandwidth specification rather than assuming every closed-loop configuration supports the same frequency.
Is OPA338UA rail-to-rail input or output?
OPA338UA is explicitly described as a rail-to-rail-output operational amplifier. The Texas Instruments OPA338 product page and part-details description identify the RRO output configuration. The input-common-mode limits must still be taken from the manufacturer datasheet because the verified product description does not establish a rail-to-rail-input claim, and output operation near either rail is constrained by the specified load and output-voltage conditions.
Where can I download the OPA338UA datasheet PDF?
The official OPA338 datasheet is available through the Texas Instruments product page linked on this page. The product page provides the complete family documentation, ordering information, quality information, and links to the manufacturer datasheet. Use the Texas Instruments copy for authoritative pin assignments, electrical characteristics, package dimensions, and recommended application layouts rather than relying on a third-party mirror for design release.
Where can I find the OPA338UA pinout?
OPA338UA uses an 8-pin SOIC package, and its pin assignments are shown in the manufacturer datasheet. The standard single-amplifier configuration identifies the inverting input, non-inverting input, output, positive supply, negative supply, and unused or no-connect positions. Use the pin-description table in the Texas Instruments datasheet when assigning PCB tracks, particularly because SOIC package drawings can be visually similar even when functional assignments differ.
Where to buy OPA338UA online?
Use the Request a Quote form on this page to request OPA338UA availability, current lead time, and an order quotation from XAIPART. The exact Texas Instruments orderable code is OPA338UA, so include the full MPN in the request and state the required delivery quantity and packaging preference. This avoids confusion with other OPA338 package, temperature, or tape-and-reel ordering codes.
What is the price of OPA338UA?
Request a current OPA338UA quotation through the Request a Quote form on this page. The form supports quantity-based sourcing and provides the current commercial terms associated with the exact MPN. Pricing for this amplifier can vary with order quantity, inventory, and packaging, so the quotation form is the appropriate route for obtaining a current transaction price rather than relying on a stale listing figure.
What is the lead time and stock status of OPA338UA?
Request current stock, lead time, and minimum-order quantity for OPA338UA using the Request a Quote form on this page. Include your required quantity, target date, and acceptable packaging configuration. Because inventory and production scheduling can change, a current sourcing response is more reliable than an undated stock indication for production planning or prototype scheduling.
What can replace OPA338UA?
OPA337PA is the closest identified same-family drop-in candidate for OPA338UA because it uses the same single-amplifier, 8-pin SOIC format and is compared against the OPA338UA on component databases. Its higher bandwidth or exact electrical-equivalence status should be confirmed in the manufacturer datasheets before substitution. No verified cross-brand, pin-compatible replacement was established, so functional similarity alone is not sufficient to claim a drop-in replacement.
Is OPA338UA the same as OPA337PA?
OPA338UA and OPA337PA are closely related single-amplifier CMOS devices offered in the same 8-pin SOIC format, but they belong to different family positions within the OPA337 and OPA338 series. The OPA338UA has a stated gain-bandwidth product of 62.5 MHz. Before substituting OPA337PA, compare offset voltage, input bias current, noise, slew rate, common-mode range, output swing, and temperature limits against the design requirements.
OPA338UA vs OPA337PA - which is better for a high-speed filter?
OPA338UA is the better starting choice when the design specifically needs its higher stated 62.5 MHz gain-bandwidth product and the filter operates near that frequency range. OPA337PA may be appropriate when its lower-speed characteristics, offset behavior, and other electrical ratings better match the circuit and cost target. Both are single amplifiers in 8-pin SOIC packages, so the selection should be based on verified AC and DC performance rather than package interchangeability alone.
When should I choose OPA338UA over OPA337PA?
Choose OPA338UA when the signal path benefits from its 62.5 MHz gain-bandwidth product, such as in wider-band active filtering or faster signal conditioning. Choose OPA337PA when its particular offset, noise, bias-current, and bandwidth ratings provide a better system match or lower cost. Because the related parts serve different performance envelopes, validate stability, output swing, common-mode range, and required gain before finalizing either choice.
Is OPA338UA suitable for low-voltage sensor signal conditioning?
OPA338UA is suitable for low-voltage sensor signal conditioning when its 5.5 V supply, 62.5 MHz bandwidth, and rail-to-rail output behavior fit the signal range. The CMOS operational-amplifier architecture supports compact measurement modules and can amplify signals near the lower supply range without requiring a dual-supply arrangement. Confirm that the sensor output remains inside the datasheet input-common-mode range and that the required output swing supports the downstream ADC or controller.
What is the best cross-brand equivalent for OPA338UA?
No verified cross-brand equivalent was established for OPA338UA that can be represented as a true drop-in replacement. A suitable alternative must match the 8-pin SOIC footprint and pin assignment while also meeting the circuit's bandwidth, input bias current, offset voltage, noise, common-mode range, output swing, and supply requirements. Use the Texas Instruments cross-reference tools and manufacturer datasheets to confirm any proposed substitute before approving it for production.

Data referensi engineering untuk OPA338UA — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose OPA338UA when a compact, single-supply design benefits from a 62.5 MHz gain-bandwidth product and rail-to-rail output operation. It is especially appropriate for low-level sensor conditioning, active filtering, communications interfaces, and compact data-acquisition circuits where a 5.5 V rail and higher analog bandwidth are priorities. OPA337PA is the closest identified drop-in candidate in the same single-amplifier 8-pin SOIC format, but it should be selected when its lower-bandwidth family position and specific offset, noise, and bias-current characteristics provide a better electrical or cost match. No verified cross-brand drop-in equivalent is established, so a competitor should not be approved without a full footprint, pinout, and electrical-performance comparison. In either case, verify input-common-mode range, output swing, bias current, noise, offset voltage, and stability under the actual loading and temperature conditions.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini OPA337PA
Brand Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC
Amplifier Configuration Single Single
Process Technology CMOS CMOS

Diferensiator Kunci

  • Higher stated bandwidth within the related low-power CMOS amplifier family (vsOPA337PA)
  • Rail-to-rail output expands usable signal range on a single low-voltage supply (vsOPA337PA)
  • Single amplifier in a compact surface-mount package (vsOPA337PA)

Catatan Desain

Place the supply-bypass capacitor immediately adjacent to the positive and negative supply pins, with a short return path to the device ground or supply-reference connection. Keep the inverting-feedback loop compact to reduce parasitic capacitance and improve stability at high closed-loop gain. Route the non-inverting input away from noisy switching nodes and maintain a continuous ground reference beneath the SOIC where the board layout permits.

Design the 5.5 V rail with transient margin below the device maximum rating and check the load current against the output-current specifications for the selected supply and temperature. Rail-to-rail output does not mean unlimited output current or an unrestricted swing to the physical rail. For battery-powered systems, include the amplifier's quiescent current and load-dependent consumption in the power-budget calculation.

Do not assume that rail-to-rail output also guarantees rail-to-rail input operation. Compare the sensor or source voltage with the datasheet's input-common-mode range, including limits that may depend on supply voltage. Also account for input offset voltage and bias current when working with high-impedance sources, because these errors can exceed the signal being measured even when the amplifier's bandwidth is more than adequate.

Select feedback resistors and capacitors with values appropriate for the intended closed-loop bandwidth rather than using arbitrarily high resistor values. Excess resistance combined with input and parasitic capacitance can reduce bandwidth and alter phase margin. For filtering or communication paths, simulate the complete amplifier-and-feedback network, verify stability, and check output settling at the highest expected signal frequency.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The verified product information identifies the OPA338 family but does not provide explicit compliance declarations.

Pencarian Terkait

OPA338UA datasheet OPA338UA datasheet pdf OPA338UA pinout OPA338UA specifications OPA338UA equivalent OPA338UA replacement OPA338UA vs OPA337PA OPA338UA price OPA338UA stock Texas Instruments OPA338UA OPA338UA 5.5V 62.5MHz OPA338UA SOIC-8 footprint OPA338UA sensor signal conditioning OPA338UA active filter

Komponen dan Istilah Terkait

Texas Instruments OPA338UA OPA338 OPA337PA OPA337 operational amplifier CMOS operational amplifier rail-to-rail output RRO single amplifier gain-bandwidth product 62.5 MHz 5.5 V signal conditioning active filter sensor interface communications interface data acquisition SOIC-8 QFN family surface mount SMD input common-mode range input offset voltage input bias current quiescent current RoHS REACH
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ