OPA338UA - 5.5V, 62.5MHz RRO Op Amp | Texas Instruments
N.º da peça: OPA338UA ✓ AtivoOPA338UA Visão geral
An operational amplifier is a voltage-gain device used to amplify the difference between two input voltages. Within the amplifier hierarchy, the OPA338UA belongs to the CMOS operational-amplifier class, which combines high input impedance, low power consumption, and wide bandwidth. Its rail-to-rail output stage can approach the supply rails, improving output-voltage range in low-voltage systems where conventional output stages leave less usable signal swing.
The key operating characteristics include a single 5.5 V supply, 62.5 MHz gain-bandwidth product, rail-to-rail output operation, and a single-amplifier configuration. The 62.5 MHz bandwidth provides useful speed for signal conditioning, while the compact SOIC-8 package supports conventional surface-mount assembly. The manufacturer describes the OPA337 and OPA338 series as low-cost, miniature CMOS amplifiers intended for space-sensitive applications.
OPA338UA uses advanced CMOS technology and is designed for single-supply operation. Rail-to-rail output behavior is particularly useful when the desired output must move close to either supply rail, although the usable range at each extreme remains subject to the datasheet output-voltage and load-current limits. The OPA338 is positioned as the higher-bandwidth member relative to the closely related OPA337 family, making it more suitable for applications that need faster closed-loop response or higher-frequency filtering.
Typical uses include low-level sensor-signal amplification, active filters, communications-interface signal conditioning, portable measurement equipment, and small control or monitoring modules. The 5.5 V maximum supply suits compact systems operating from a single low-voltage rail. For battery-powered designs, the low-power CMOS implementation can help reduce system energy consumption, but quiescent current and load-current behavior should be checked against the operating conditions.
When laying out a design, place input, output, supply, and decoupling connections according to the manufacturer datasheet guidance. Use short, low-impedance routing for high-frequency signals and place bypass capacitance close to the supply pins. Confirm the source and sink current limits across the full output-voltage swing rather than assuming symmetrical performance at the rail limits.
This product page combines the OPA338UA's verified operating characteristics, package information, sourcing guidance, and engineering-focused design considerations. It also identifies the closest supported drop-in option separately from broader functional alternatives, helping engineers distinguish true footprint-compatible replacements from devices that merely perform a similar function.
Alternativas drop-in para OPA338UA — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
OPA337PA
✅ Drop-InConsulte o preço
Ver ficha técnica →OPA338UA Classificações máximas e características elétricas
| Amplifier Type | Single operational amplifier |
| Maximum Supply Voltage | 5.5 V |
| Nominal Supply Voltage | 5.5 V |
| Gain-Bandwidth Product | 62.5 MHz |
| Tipo de saída | Rail-to-rail output |
| Encapsulamento | 8-pin SOIC |
| Tipo de montagem | Surface mount |
| Process Technology | CMOS |
Configuração de pinos do OPA338UA
| Pino 1 | NC — Not connected |
| Pino 2 | IN- — Inverting input |
| Pino 3 | IN+ — Non-inverting input |
| Pino 4 | V- — Negative supply or ground connection |
| Pino 5 | NC — Not connected |
| Pino 6 | OUT — Output |
| Pino 7 | V+ — Positive supply |
| Pino 8 | NC — Not connected |
Aplicações típicas
OPA338UA é adequado para 6 aplicaçãos: Low-Level Sensor Signal Conditioning, Active Audio Filtering, Communications Interface Conditioning, Portable Measurement Equipment, Industrial Control and Monitoring, Data Acquisition Front End.
Low-Level Sensor Signal Conditioning
OPA338UA suits low-level sensor front ends that require a single 5.5 V rail, a 62.5 MHz gain-bandwidth product, and rail-to-rail output capability. The amplifier can amplify a sensor-generated voltage before conversion by an ADC or digitization by a controller while operating from the same compact supply as the sensed system. Its single-amplifier configuration simplifies routing in space-constrained designs. Confirm that the sensor's common-mode voltage and the required output swing remain inside the manufacturer limits, and place supply bypass capacitance close to the device.
Recomendado
Active Audio Filtering
OPA338UA can implement active filters in compact audio and communications modules because its 62.5 MHz gain-bandwidth product provides considerably more open-loop bandwidth than the signal frequencies commonly processed by small audio boards. Rail-to-rail output operation can increase usable output swing in a single low-voltage supply arrangement, while the single SOIC-8 package simplifies board area. Filter component tolerances and op-amp noise can determine the realized cutoff and response, so simulate the complete network and check output swing at the selected load.
Recomendado
Communications Interface Conditioning
OPA338UA is appropriate for communications-interface signal conditioning where a low-voltage single-supply amplifier must process small-amplitude signals with higher bandwidth than typical general-purpose parts. The 62.5 MHz gain-bandwidth product supports moderate-speed amplification, while the CMOS process and small SOIC-8 footprint suit compact peripheral and communications modules. Verify the input common-mode range, output capability into the receiving circuit, and stability of the selected feedback network. Keep sensitive input routing short and return the bypass capacitor directly to the supply-reference connection.
Recomendado
Portable Measurement Equipment
OPA338UA fits portable measurement equipment that combines low-voltage operation, analog amplification, and compact PCB area. A single 5.5 V supply reduces power-tree complexity, and the 62.5 MHz gain-bandwidth product allows the amplifier to serve functions beyond slow instrumentation buffers, including active filtering and gain stages. The rail-to-rail output architecture can improve signal range in battery-operated systems. Designers should still verify supply-current demand, input bias current against high-impedance sensors, and output settling over the required measurement bandwidth.
Recomendado
Industrial Control and Monitoring
OPA338UA can condition sensor and feedback signals in industrial control or monitoring modules built around a 5.5 V power rail. Its 62.5 MHz gain-bandwidth product provides response margin for fast control-loop signals, while the single-amplifier SOIC-8 package simplifies component placement in densely populated controller boards. The CMOS architecture supports low-voltage operation, but the selected operating temperature grade and electrical limits must satisfy the industrial environment. Pay particular attention to input offset, bias current, noise, and common-mode range when sourcing high-impedance sensors.
Recomendado
Data Acquisition Front End
OPA338UA is suitable for a single-op-amp data-acquisition front end when the source is a low-voltage analog sensor and the design benefits from a 62.5 MHz gain-bandwidth product. It can provide gain, level shifting toward the downstream converter's range, and first-order filtering without occupying multiple amplifier packages. Rail-to-rail output behavior can help maximize signal use on a single supply. Establish the required gain and bandwidth before selecting resistor and capacitor values, then verify settling accuracy, output loading, and input-common-mode compliance in the finished acquisition chain.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para OPA338UA — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | OPA337PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC | 8-pin SOIC |
| Amplifier Configuration | Single | Single |
| Process Technology | CMOS | CMOS |
Principais diferenciais
- Higher stated bandwidth within the related low-power CMOS amplifier family (vs OPA337PA)
- Rail-to-rail output expands usable signal range on a single low-voltage supply (vs OPA337PA)
- Single amplifier in a compact surface-mount package (vs OPA337PA)
Notas de projeto
Place the supply-bypass capacitor immediately adjacent to the positive and negative supply pins, with a short return path to the device ground or supply-reference connection. Keep the inverting-feedback loop compact to reduce parasitic capacitance and improve stability at high closed-loop gain. Route the non-inverting input away from noisy switching nodes and maintain a continuous ground reference beneath the SOIC where the board layout permits.
Design the 5.5 V rail with transient margin below the device maximum rating and check the load current against the output-current specifications for the selected supply and temperature. Rail-to-rail output does not mean unlimited output current or an unrestricted swing to the physical rail. For battery-powered systems, include the amplifier's quiescent current and load-dependent consumption in the power-budget calculation.
Do not assume that rail-to-rail output also guarantees rail-to-rail input operation. Compare the sensor or source voltage with the datasheet's input-common-mode range, including limits that may depend on supply voltage. Also account for input offset voltage and bias current when working with high-impedance sources, because these errors can exceed the signal being measured even when the amplifier's bandwidth is more than adequate.
Select feedback resistors and capacitors with values appropriate for the intended closed-loop bandwidth rather than using arbitrarily high resistor values. Excess resistance combined with input and parasitic capacitance can reduce bandwidth and alter phase margin. For filtering or communication paths, simulate the complete amplifier-and-feedback network, verify stability, and check output settling at the highest expected signal frequency.
Informações de conformidade
The verified product information identifies the OPA338 family but does not provide explicit compliance declarations.