Texas Instruments

OPA347PA - 350kHz Micropower RRIO Op Amp | Texas Instruments

MPN: OPA347PA ✓ Aktif
5.5 V Vdss 20 uA Id 8-pin PDIP Package
MOQ: 1 |

OPA347PA Ringkasan

The Texas Instruments OPA347PA is a single, 5.5 V, 350 kHz micropower operational amplifier with 20 uA quiescent current and rail-to-rail input and output operation, housed in an 8-pin PDIP package. Its combination of low supply current, extended input range, and moderate gain-bandwidth product makes it suitable for portable, battery-powered, and low-power signal-conditioning systems.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs while using negative feedback to set a stable closed-loop gain. The OPA347 belongs to the hierarchy of operational amplifier, voltage-feedback amplifier, analog amplifier, and semiconductor. Rail-to-rail input and output, commonly abbreviated RRIO, allow the amplifier to operate near the supply rails without requiring a reduced common-mode or output-voltage range.

The principal features of the OPA347 are its 5.5 V maximum supply voltage, 350 kHz gain-bandwidth product, and low quiescent current. According to the manufacturer datasheet, the input range extends 200 mV beyond the supply rails, while the output range reaches within 5 mV of the rails. These characteristics support sensor interfaces, low-current signal conditioning, portable instrumentation, and analog measurement circuits.

The OPA347 uses a low-power amplifier architecture optimized for speed-to-power performance rather than the bandwidth of a high-speed operational amplifier. Its 350 kHz bandwidth is adequate for low-frequency sensor signals and general-purpose analog conditioning. Input operation beyond the nominal rails improves usable signal range in low-voltage systems, although common-mode, output-swing, and supply-voltage limits must still be respected during design.

Typical uses include battery-powered sensor conditioning, portable biomedical instrumentation, low-power data acquisition, current sensing, and buffering. It is particularly appropriate where the signal bandwidth is well below 350 kHz and the 20 uA nominal quiescent current is valuable for extending battery life. The device can also serve as a general-purpose amplifier or voltage follower when low-noise settling and low standby consumption are priorities.

Designers should verify the complete common-mode and output-swing curves at the intended supply voltage and load current. Decoupling capacitors should be placed close to the supply pins, input bias currents should remain below the source impedance, and the feedback network should be evaluated for output-capacitance stability. The PDIP package is suited to prototypes, educational assemblies, and through-hole production runs where a surface-mount package is unnecessary.

This page organizes the OPA347PA specifications, package details, practical design guidance, verified-source references, and same-family replacement information into one engineering-focused reference. It also identifies which operating parameters require confirmation in the manufacturer datasheet rather than presenting unsupported values as fixed design limits.

Alternatif penggantian untuk OPA347PA — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

OPA347P

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-pin PDIP
Same 5.5 V maximum supply, 350 kHz bandwidth, and 20 uA nominal quiescent current; ordering suffix changes the commercial package format

📋 Alternatif referensi (tidak dalam katalog)

OPA347PA Rating Maksimal & Karakteristik Listrik

Amplifier Type Single operational amplifier
Maximum Supply Voltage 5.5 V
Gain-Bandwidth Product 350 kHz
Nominal Quiescent Current 20 uA
Maximum Quiescent Current 34 uA per channel
Input Rail-to-Rail Operation Yes; input range extends 200 mV beyond the rails
Output Rail-to-Rail Operation Yes; output range is within 5 mV of the rails
Output Voltage Swing Within 5 mV of the supply rails
Rentang Suhu Kerja -55 C to +125 C
Paket 8-pin PDIP
Jumlah Pin 8 pins
Tipe Mounting Through-hole DIP
Circuit Count 1 circuit

Konfigurasi Pin OPA347PA

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin produk 1 NC — Not connected
Pin produk 2 IN- — Inverting input
Pin produk 3 IN+ — Non-inverting input
Pin produk 4 V- — Negative supply voltage
Pin produk 5 NC — Not connected
Pin produk 6 OUT — Output voltage
Pin produk 7 V+ — Positive supply voltage
Pin produk 8 NC — Not connected

Aplikasi Umum

OPA347PA cocok untuk 6 aplikasis: Battery-Powered Sensor Conditioning, Portable Medical Instrumentation, Low-Power Data Acquisition, Current and Voltage Sensing, General-Purpose Low-Power Buffering, Industrial Control and Monitoring.

🧩

Battery-Powered Sensor Conditioning

OPA347PA is well suited to conditioning slow sensor outputs in battery-powered equipment because its nominal quiescent current is 20 uA and its maximum value is 34 uA per channel. Place the amplifier near the sensor interface so long unamplified traces do not add avoidable loading or noise pickup. Rail-to-rail input operation, with the input range extending 200 mV beyond the rails, helps preserve signal headroom in compact low-voltage systems. The 350 kHz bandwidth is more than adequate for temperature, pressure, and slow-motion sensors, while stable feedback resistors keep the micropower stage responsive.

💊

Portable Medical Instrumentation

OPA347PA can serve as a low-power gain stage or buffer in portable medical instrumentation where a small signal must be conditioned before an ADC. Its 20 uA nominal quiescent current reduces continuous battery drain, while the 350 kHz bandwidth handles many bio-sensor and diagnostic front-end signals. The rail-to-rail input and output capability supports operation from low supply voltages without immediately clipping at the rails. Gain, input bias current, offset, noise, and isolation requirements must still be reviewed against the specific sensor and safety architecture.

🖥️

Low-Power Data Acquisition

OPA347PA is useful as an input amplifier or unity-gain buffer in a compact data-acquisition channel operating from a low-voltage supply. Its 350 kHz gain-bandwidth product provides ample closed-loop bandwidth for many multiplexed slow inputs, while the 20 uA nominal quiescent current limits the penalty from keeping one amplifier continuously powered. Place the device close to the ADC input and use short, guarded routing to minimize pickup. Decoupling near the supply pins and properly scaled feedback resistors help maintain predictable operation across temperature.

⚡

Current and Voltage Sensing

OPA347PA can amplify the small differential voltage produced by a current-sense element or precision resistive divider. Its rail-to-rail input behavior is useful when the sensed signal approaches a supply rail, and the input range extending 200 mV beyond the rails provides additional margin in low-voltage systems. The 350 kHz bandwidth supports bandwidths common to slow current measurements. Designers should verify source impedance, input bias-current error, common-mode limits, and output swing at the maximum load current before finalizing the gain network.

🔧

General-Purpose Low-Power Buffering

OPA347PA works as a voltage follower or general-purpose buffer when a high-impedance source must drive a moderate downstream load without adding excessive supply demand. Its 20 uA nominal quiescent current benefits battery-operated equipment, and the output stage can operate within 5 mV of the rails under the conditions stated by the manufacturer datasheet. Use a unity-gain configuration when isolation and impedance conversion are the main goals. Confirm stability with the source capacitance, load capacitance, and external feedback network used in the final circuit.

🏭

Industrial Control and Monitoring

OPA347PA is appropriate for low-frequency industrial monitoring circuits that process sensor outputs from a low-voltage control system. The rail-to-rail input range allows the amplifier to handle signals near the supply limits, while 350 kHz bandwidth covers many process-control and diagnostic waveforms. Its low quiescent current benefits distributed monitoring modules with limited thermal budgets. Industrial qualification requirements should be checked separately from the stated operating-temperature range, and protection networks should handle transients that exceed the amplifier's 5.5 V maximum supply voltage.

Ringkasan Produk Direkomendasikan

OPA347UA Single-amplifier family option for compact portable designs Digunakan di dalam: Battery-Powered Sensor Conditioning, Portable Medical Instrumentation, Low-Power Data Acquisition, Current and Voltage Sensing, General-Purpose Low-Power Buffering OPA2347EA/3KG4 Dual family option when two correlated analog channels are required Digunakan di dalam: Portable Medical Instrumentation, Low-Power Data Acquisition, Industrial Control and Monitoring OPA347P Same-family PDIP option for through-hole assemblies Digunakan di dalam: General-Purpose Low-Power Buffering
What are the key specifications of OPA347PA that engineers should know?
The OPA347PA is a single 5.5 V, 350 kHz, 20 uA quiescent-current operational amplifier with rail-to-rail input and output operation in an 8-pin PDIP package. According to the Texas Instruments OPA347 datasheet, its input range extends 200 mV beyond the supply rails and its output reaches within 5 mV of the rails. These characteristics make it useful for portable sensing, low-power buffering, and general-purpose analog signal conditioning.
What is the operating voltage of OPA347PA?
The OPA347PA operates from a maximum supply voltage of 5.5 V. According to the Texas Instruments OPA347 datasheet, it is a low-voltage micropower amplifier with rail-to-rail input and output behavior. Keep the applied supply below 5.5 V and confirm the usable common-mode and output-swing ranges for the actual supply voltage and load condition.
What is the bandwidth of OPA347PA?
The OPA347PA has a 350 kHz gain-bandwidth product, making it a moderate-bandwidth amplifier intended for low-frequency and sensor-oriented analog signals. According to the Texas Instruments manufacturer datasheet, the device also features a strong speed-to-power ratio for its micropower operating class. It is not the preferred choice for signals that require megahertz-bandwidth closed-loop performance.
Why is OPA347PA suitable for battery-powered applications?
The OPA347PA is suitable for battery-powered applications because its nominal quiescent current is 20 uA and the manufacturer datasheet specifies no more than 34 uA per channel. That low standby demand helps preserve battery capacity when the amplifier remains connected to a sensor. Rail-to-rail operation also improves signal utilization in low-voltage systems.
Where can I download the OPA347PA datasheet PDF?
The official OPA347PA datasheet can be obtained from the Texas Instruments product link on this page or from the manufacturer datasheet link. The document identifies OPA347PA as the 8-pin PDIP ordering option of the single OPA347 amplifier. Use the pin-description table and electrical-characteristics tables for final design sign-off.
Where can I find the OPA347PA pinout?
The OPA347PA pinout is shown in the Texas Instruments OPA347 datasheet package information. This 8-pin PDIP device uses the standard single operational-amplifier arrangement, with the manufacturer datasheet serving as the authority for pin numbering and functions. The visible pinout on this page lists all eight positions and identifies unused terminals explicitly.
Where can I buy OPA347PA online?
Use the Request a Quote form on this page to inquire about OPA347PA availability, current lead time, and ordering details. The component is identified by Texas Instruments as an 8-pin PDIP operational amplifier. The form is the appropriate route for an exact-package quotation without relying on stale inventory information.
What is the price of OPA347PA?
Current OPA347PA pricing is handled through the Request a Quote form on this page so that the quote reflects the exact ordering code, package, and quantity. The structured pricing information on this page includes qualifying quantity-break evidence when it is available. Submit your required quantity and delivery details with the quote request.
What is the lead time for OPA347PA?
Request the current OPA347PA lead time through the Request a Quote form on this page. Lead time can vary with order quantity, inventory status, and the exact ordering option selected. Providing the required quantity and target delivery date allows the order review to return a more useful scheduling response.
Is OPA347PA in stock?
Use the Request a Quote form on this page to request the latest OPA347PA inventory and delivery status. Stock status changes independently of technical specifications and should be confirmed for the required quantity and packaging configuration. The Texas Instruments product and part-detail pages identify the device as the PDIP version of the OPA347.
What can replace OPA347PA?
OPA347P is the closest same-package option because it represents the OPA347 single amplifier in the same PDIP-8 electrical configuration. Confirm its ordering suffix and tube packaging before substitution. Cross-brand equivalents require independent verification of pinout, supply voltage, quiescent current, bandwidth, common-mode range, and output swing; the cross-reference material does not establish one as a direct drop-in replacement.
Is OPA347PA the same as OPA347P?
OPA347PA and OPA347P refer to the same OPA347 single-amplifier family and PDIP-8 electrical configuration, with the ordering suffix distinguishing the commercial packaging format. The manufacturer product page identifies OPA347PA as an 8-pin PDIP option. Verify the exact suffix, orderable quantity, and labeling requirements before treating the parts as interchangeable.
OPA347PA vs OPA2347EA/3KG4 - which is better for a low-power design?
OPA347PA is generally better for a low-power single-channel design because it is a single amplifier specified at 20 uA nominal quiescent current, while OPA2347EA/3KG4 is a dual-amplifier device in an SOT23-8 package. The choice also depends on whether two channels are required and whether a through-hole footprint is mandatory. A dual package cannot replace the OPA347PA without PCB changes.
When should I choose OPA347PA over a higher-bandwidth operational amplifier?
Choose OPA347PA when the signal bandwidth is comfortably below its 350 kHz gain-bandwidth product and battery life is more important than high-speed response. Its 20 uA nominal quiescent current and rail-to-rail behavior suit low-duty-cycle sensing and portable instrumentation. Select a higher-bandwidth amplifier when slew rate, settling time, or wideband signal integrity becomes limiting.
Is OPA347PA suitable for portable sensor conditioning?
OPA347PA is suitable for portable sensor conditioning because it combines a 20 uA nominal quiescent current with rail-to-rail input and output operation. Its input range extends 200 mV beyond the rails, which can improve utilization of low-voltage sensor headroom. The 350 kHz bandwidth is appropriate for many temperature, pressure, light, and slow-motion sensing signals.

Data referensi engineering untuk OPA347PA — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose OPA347PA when a single, low-power amplifier is needed in an 8-pin PDIP design and the signal bandwidth is well below 350 kHz. Its 20 uA nominal quiescent current, rail-to-rail input and output behavior, and input range extending 200 mV beyond the rails make it especially useful for battery-powered sensing and portable instrumentation. OPA347P is the closest same-package ordering option and should be selected when its commercial packaging format better matches procurement needs. OPA2347EA/3KG4 is useful when two amplifiers are required, but its SOT23-8 package requires a different PCB layout and a dual-channel PCB footprint. A higher-bandwidth amplifier is preferable when waveform fidelity, slew rate, or settling at megahertz-class frequencies is more important than low quiescent current. Before substituting any device, verify the pinout, supply range, input common-mode range, output swing, stability, offset, bias current, and temperature limits against the final circuit.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini OPA347P
Brand Texas Instruments Texas Instruments
Package 8-pin PDIP 8-pin PDIP
Maximum Supply Voltage 5.5 V 5.5 V
Gain-Bandwidth Product 350 kHz 350 kHz
Nominal Quiescent Current 20 uA 20 uA
Maximum Quiescent Current 34 uA per channel 34 uA per channel
Input Common-Mode Range Extends 200 mV beyond the supply rails Extends 200 mV beyond the supply rails
Output Swing Within 5 mV of the supply rails Within 5 mV of the supply rails
Circuit Count 1 circuit 1 circuit
Operating Temperature Range -55 C to +125 C -55 C to +125 C

Diferensiator Kunci

  • Low micropower operation supports battery-focused designs (vsOPA2347EA/3KG4)
  • Through-hole package supports direct DIP-8 assembly (vsOPA2347EA/3KG4)
  • Rail-to-rail operation improves low-voltage signal utilization (vsOPA347P)

Catatan Desain

Estimated: with a 3.3 V supply, 5 uA load, and 20 uA quiescent current, the nominal supply-current contribution is approximately 25 uA. This is an arithmetic estimate using the stated values rather than a datasheet maximum. Verify the maximum supply current over temperature and account for output-current demand, charger leakage, and regulator quiescent current when sizing a battery.

Place the supply-bypass capacitor directly between pins 7 and 4, with a short and low-inductance ground return. Route both input traces away from the output and supply paths, particularly when the source impedance is high. If the amplifier drives a capacitive load, add the isolation resistance and load range recommended in the manufacturer datasheet rather than relying on excessive feedback capacitance.

Do not assume that a rail-to-rail input amplifier can accept signals indefinitely beyond its supply pins. The stated 200 mV over-rail input capability has device-specific limits, and the exact common-mode range must be checked at the operating supply voltage. Also avoid using the maximum 350 kHz gain-bandwidth figure as a guaranteed small-signal bandwidth for every closed-loop gain and load.

Keep source impedances low enough that input-bias-current error remains small relative to the sensor signal. Use matched feedback resistors to reduce offset generated by bias currents, and avoid extremely high closed-loop gains with a single amplifier when noise, offset, and settling requirements dominate. For fast edge or step responses, evaluate closed-loop settling separately because the 350 kHz gain-bandwidth product alone does not specify settling accuracy.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No explicit compliance declarations were present in the manufacturer and distributor product information. The operating-temperature comparison identifies the OPA347PA as rated for -55 C to +125 C, but temperature ratings alone do not establish AEC-Q100 qualification.

Pencarian Terkait

OPA347PA datasheet OPA347PA pinout OPA347PA datasheet pdf OPA347PA DIP-8 amplifier OPA347PA equivalent OPA347PA replacement OPA347PA cross reference OPA347PA vs OPA2347EA/3KG4 OPA347PA price OPA347PA stock Texas Instruments OPA347PA OPA347PA 350kHz op amp OPA347PA battery powered sensor OPA347PA DIP-8 pinout

Komponen dan Istilah Terkait

Texas Instruments OPA347PA OPA347P OPA2347EA/3KG4 OPA347 OPA2347 operational amplifier voltage-feedback amplifier analog amplifier semiconductor RRIO rail-to-rail input rail-to-rail output quiescent current gain-bandwidth product input common-mode range output voltage swing PDIP-8 DIP through-hole package surface mount battery-powered applications portable instrumentation sensor conditioning data acquisition
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ