NXP Semiconductors

PCA9507D - 400kHz 2-Wire I2C Bus Extender | NXP

MPN: PCA9507D ✓ Aktif
Dual supply Vdss 8-pin SOIC Package 400 kHz Speed
MOQ: 1 |

PCA9507D Ringkasan

The NXP Semiconductors PCA9507D is a dual-supply, bidirectional 2-wire serial-bus extender with a 400 kHz operating frequency in an 8-pin SOIC package. It provides 3.3 V to 5 V level shifting, buffers the SDA and SCL data paths, and extends an I2C, SMBus, or HDMI DDC bus by as much as 18 meters.

An I2C bus extender is an interface IC that preserves two-wire serial communication across a physical distance or voltage boundary. The PCA9507D belongs to the I2C interface-controller and signal-buffer hierarchy: it supports the I2C-bus system while providing bidirectional buffering for both SDA and SCL. Its dual-supply architecture lets the two sides of the bus operate at different logic levels, making the device useful when a downstream circuit uses a voltage outside the source-side range.

The primary features include 3.3 V to 5 V level shifting, operation up to 400 kHz, and bus extension to 18 meters. Bidirectional buffering is important because I2C and SMBus use open-drain signaling in which pull-up resistors, rather than the active driver, establish the high state. The PCA9507D accommodates that topology without changing the basic operating modes of the two-wire bus.

Technically, the device separates the source-side and destination-side signal paths while preserving clock and data behavior. This arrangement can maintain communication between circuit boards or cable-linked equipment where direct capacitance, voltage incompatibility, or bus-length limitations would otherwise degrade signal integrity. Its 400 kHz frequency class supports moderate-speed control, configuration, and status buses rather than high-bandwidth data transfer.

Typical applications include extending HDMI Display Data Channel connections between a source and display, isolating I2C control lines across equipment boundaries, lengthening SMBus communication paths, and adapting 3.3 V logic to a 5 V peripheral. The SOIC-8 package also supports conventional surface-mount assembly and compact two-sided PCB layouts.

Designers should use the pin-description and application diagrams in the NXP manufacturer datasheet when assigning pull-up resistors, supply connections, and signal routing. Place the device near the physical midpoint of a long extension rather than at only one end, because its intended benefit depends on buffering the two bus segments and isolating their loading. Confirm that both bus speeds, voltage domains, rise times, and pull-up arrangements meet the device and system requirements.

This page combines the manufacturer’s bus-extension capabilities with practical placement guidance, sourcing paths, and verified drop-in alternatives. It is intended to help engineers determine whether the PCA9507D solves the specific level-shifting, distance, or loading constraint in an I2C, SMBus, or HDMI DDC design.

Alternatif penggantian untuk PCA9507D — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian PCA9507D (sama faktor bentuk dan footprint) — berbeda di dalam Package.

NXP Semiconductors
Package: 8-TSSOP (SOT505-1, DP suffix)
Bandingkan dengan PCA9507D →

PCA9507D,112

✅ Drop-In
📦 8-pin SOIC
Same PCA9507-series 400 kHz bus-extension function and 8-pin SOIC package; ordering suffix differs by 0% in the stated core function.

📋 Alternatif referensi (tidak dalam katalog)

PCA9507DP,118

✅ Drop-In
NXP Semiconductors
📦 8-pin SOIC
Buffer, Accelerator (2-wire bus extender / repeater) · 1 (SDA + SCL pair) · I²C, SMBus, DDC (HDMI) · 400 kHz (Fast-mode) · 2.7 V to 5.5 V · 3.3 V to 5 V level shift (bidirectional) · 218 ns (typical) · Up to 18 m

Kontak untuk harga

Lihat Datasheet →

PCA9507D,118

✅ Drop-In
📦 8-pin SOIC
Manufacturer orderable form of PCA9507D with the same 400 kHz, 3.3 V to 5 V, 18-meter extender function and 8-pin SOIC package.

📋 Alternatif referensi (tidak dalam katalog)

PCA9507D Spesifikasi

Product Type 2-wire serial bus extender
Supported Buses I2C, SMBus, HDMI DDC
Maximum Bus Frequency 400 kHz
Logic Level Shift Range 3.3 V to 5 V
Maximum Bus Extension 18 m
Channel Count 1 channel
Signal Type Bidirectional SDA and SCL buffering
Supply Architecture Dual supply
Paket 8-pin SOIC
Tipe Mounting Surface mount
Manufacturer Order Code PCA9507D,118
Status Lingkungan Hidup Active
RoHS Compliance Compliant
REACH Compliance Compliant
Conflict-Free Status DRC Conflict Free

PCA9507D 8-pin soic Diamant Konfigurasi Panduan

Konfigurasi pin untuk PCA9507D (8-pin soic pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 8-pin soic untuk PCA9507D

Tidak ada data diatribut pin yang tersedia untuk PCA9507D.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

PCA9507D cocok untuk 6 aplikasis: HDMI Display Data Channel Extension, I2C Level Translation Between 3.3 V and 5 V, SMBus Control-Link Isolation, Board-to-Board I2C Cabling, Display and Monitor Configuration Bus, Remote Sensor and Actuator Bus.

📺

HDMI Display Data Channel Extension

The PCA9507D fits between an HDMI source and display when their DDC SDA and SCL lines require greater reach or different logic levels. Its 3.3 V to 5 V bidirectional level shifting addresses voltage-domain differences, while the 400 kHz bus rating accommodates the relatively slow DDC control traffic. The manufacturer specifies extension capability up to 18 meters for reliable HDMI DDC, I2C, and SMBus operation. Place the extender near the cable transition so each PCB section presents a separate, buffered bus segment. Validate pull-up placement, capacitance, and signal rise time in the complete source-to-display link because connector and cable parasitics can influence the achievable distance.

🔧

I2C Level Translation Between 3.3 V and 5 V

The PCA9507D is useful when a 3.3 V controller must communicate with a 5 V I2C peripheral through board-level wiring. Its 3.3 V to 5 V level-shift function and bidirectional SDA/SCL buffering allow each side to retain an appropriate local logic domain. The 400 kHz operating frequency covers common control, configuration, and sensor buses without requiring a high-speed transceiver. Select separate pull-up networks for the two voltage domains and keep the extender positioned near the voltage-domain transition. The manufacturer supports bus extension to 18 meters, but practical distance still depends on cable construction, pull-up strength, clock rate, and the rise-time requirements of both endpoint devices.

🏭

SMBus Control-Link Isolation

PCA9507D can extend and level-shift an SMBus management link between equipment cards, rack modules, or remote sensor assemblies. SMBus uses the same bidirectional clock-and-data signaling style as I2C, allowing the PCA9507D to buffer both SDA and SCL while preserving normal bus operation. Its 400 kHz maximum frequency is appropriate for configuration, identification, monitoring, and supervisory-control traffic rather than bulk data. The dual-supply capability supports a source-side and destination-side voltage split, and the 18-meter extension specification provides useful design margin when structured cabling is involved. Confirm pull-up resistor values separately on each buffered side and verify that power sequencing, bus idle levels, and device address behavior remain acceptable across the complete system.

🖥️

Board-to-Board I2C Cabling

The PCA9507D addresses long board-to-board I2C links where round-trip trace delay, connector loading, or voltage incompatibility would weaken the original bus. Its bidirectional buffering creates two distinct bus segments, allowing a controller and peripheral to communicate through a cable as long as 18 meters under the manufacturer’s stated operating conditions. The 3.3 V to 5 V level-shift range makes the same device useful in mixed-voltage equipment. For implementation, locate the extender near the board connector, place pull-up resistors on the appropriate side of each segment, and maintain a short ground-reference path between the connected assemblies. The 400 kHz limit and external pull-up network remain central constraints when establishing the final communication margin.

📺

Display and Monitor Configuration Bus

The PCA9507D is appropriate for monitor, television, projector, and display-adjacent electronics that expose a slow I2C-compatible configuration or control bus. The 400 kHz rate is more than sufficient for register-based setup and status communication, while the level translator prevents a 3.3 V controller from being exposed to a 5 V bus. Bidirectional buffering also permits the bus to continue across a panel cable or internal harness where direct routing would be impractical. Use a low-capacitance connection strategy and independent pull-ups for each voltage section. The manufacturer’s 18-meter capability should not be interpreted as guaranteeing every cable or display implementation, because rise time, EMI, grounding, and endpoint capacitance determine whether the full margin is available in the finished product.

🧩

Remote Sensor and Actuator Bus

The PCA9507D can connect a control board to a remote I2C sensor or actuator assembly when the harness is longer than a conventional local bus supports. The 3.3 V to 5 V translation accommodates mixed supply domains, while the bidirectional buffer preserves clock and data flow in either direction. At up to 400 kHz, the interface is suitable for environmental sensors, identification devices, and low-bandwidth actuator controllers that exchange setup and status registers rather than streaming data. The 18-meter extension rating makes the device relevant to industrial cabinets and distributed equipment. Before deployment, verify the sensor’s maximum bus rate, cable capacitance, pull-up values, ground continuity, and protection requirements, and add the appropriate surge or ESD protection when the cable leaves the enclosure.

Ringkasan Produk Direkomendasikan

PCA9507D,112 Same-family ordering alternative Digunakan di dalam: HDMI Display Data Channel Extension, I2C Level Translation Between 3.3 V and 5 V, Board-to-Board I2C Cabling, Display and Monitor Configuration Bus PCA9507DP,118 NXP Semiconductors Digunakan di dalam: HDMI Display Data Channel Extension, SMBus Control-Link Isolation, Board-to-Board I2C Cabling, Remote Sensor and Actuator Bus PCA9507D,118 Orderable manufacturer form Digunakan di dalam: I2C Level Translation Between 3.3 V and 5 V, SMBus Control-Link Isolation, Display and Monitor Configuration Bus, Remote Sensor and Actuator Bus
Where can I buy PCA9507D online?
The PCA9507D can be requested through the Request a Quote form on this page for the NXP 8-pin SOIC device. The form is the appropriate route for current unit availability, quantity requirements, and delivery scheduling. The manufacturer lists PCA9507D as active, while availability and shipment timing should be confirmed when the order is placed.
What is the price of PCA9507D?
Current PCA9507D pricing is obtained through the Request a Quote form on this page rather than a static offer. The form allows quantity and sourcing details to be entered so the commercial response reflects the requested configuration. The device is the NXP PCA9507D 8-pin SOIC 400 kHz two-wire bus extender, not a development board or evaluation kit.
What is the lead time for PCA9507D?
The current lead time for PCA9507D should be confirmed through the Request a Quote form on this page. The manufacturer identifies PCA9507D as active, but production scheduling and lot availability can vary by order quantity and shipment destination. Submitting the required quantity allows procurement to provide an appropriate delivery commitment.
Is PCA9507D in stock?
PCA9507D availability depends on the required quantity and current channel inventory, so use the Request a Quote form on this page to request a stock confirmation. The NXP product page identifies the PCA9507D family as active. Its ordering designation PCA9507D,118 is listed for an 8-pin SOIC package with a 400 kHz bus frequency.
What is the difference between PCA9507D and PCA9507D,112?
PCA9507D,112 is an orderable PCA9507-series designation associated with the same 8-pin SOIC interface function as PCA9507D. According to NXP and distributor listings, both parts identify a one-channel, 400 kHz two-wire serial-bus interface. The ordering suffix distinguishes commercial packaging or ordering details rather than creating a different bus-extension feature set.
Can PCA9507D replace PCA9507D,112?
PCA9507D can serve as the functional selection for a design currently identified as PCA9507D,112 because both are PCA9507-family 8-pin SOIC devices for 400 kHz two-wire bus extension. Final substitution should also account for the exact order code, reel orientation, moisture requirements, and any date-code or traceability constraints. Use the manufacturer pinout and ordering information before approving a production change.
When should I choose PCA9507D over a direct I2C connection?
Choose PCA9507D when the I2C, SMBus, or HDMI DDC connection requires level translation between 3.3 V and 5 V, requires bidirectional buffering, or must extend the bus by as much as 18 meters. A direct connection is preferable when voltage levels already match, cable length is short, and total bus capacitance remains within the target device’s specification.
Is PCA9507D suitable for HDMI DDC and SMBus applications?
The PCA9507D is suitable for HDMI DDC, I2C, and SMBus links because it provides 3.3 V to 5 V level shifting and bidirectional buffering for the two-wire bus. According to the NXP manufacturer datasheet, the device can extend the bus to 18 meters while retaining normal I2C-bus operating modes. System-level rise time and pull-up placement still require validation.
Where can I download the PCA9507D datasheet PDF?
The PCA9507D datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/PCA9507.pdf. It is the primary technical reference for the device description, 3.3 V to 5 V level-shift function, 18-meter extension capability, pin assignments, and application information. Use the same document for final PCB and schematic review.
Where can I find the PCA9507D pinout?
The PCA9507D pinout is shown in the NXP manufacturer datasheet. The device uses an 8-pin SOIC package, so the package drawing and pin-description table must be checked together before assigning VDD, ground, SDA, SCL, and enable-related connections. Do not infer a pin function from the position of another SOIC-8 interface IC.
What are the key specifications of PCA9507D that engineers should know?
The PCA9507D is a one-channel, bidirectional 2-wire serial-bus extender rated for 400 kHz operation. It supports 3.3 V to 5 V level shifting and extends I2C, SMBus, or HDMI DDC communication by as much as 18 meters. The device is supplied in an 8-pin SOIC package, and NXP lists the family as active.
What can replace PCA9507D?
PCA9507D,112 is the closest verified same-family alternative because it is another PCA9507-series order designation for the 400 kHz, one-channel, 8-pin SOIC function. Other cited interface ICs may offer similar level-shifting or bus-buffering behavior, but an equivalent function alone does not guarantee the same footprint and pin assignments. Confirm the manufacturer pinout before substitution.
What is the best Nexperia equivalent for PCA9507D?
No Nexperia equivalent can be confirmed as a pin-compatible replacement from the available component records. Although PCA9507D appears in an Nexperia distributor comparison listing, that listing does not establish identical pin assignments, supply voltages, or electrical limits. Use PCA9507D,112 or PCA9507DP,118 as the closer same-series references, then verify the exact ordering requirements.
Does PCA9507D change the I2C pull-up resistor requirement?
The PCA9507D buffers the two bus segments but does not eliminate the need for correct pull-up resistors on each side of the extender. The source-side and destination-side pull-ups should be sized for their respective voltage domains, bus capacitance, and target rise time. Use the manufacturer application information to establish placement and values for the complete board-to-board link.
What is the trade-off between PCA9507D and LTC4307IDD-1#TRPBF?
PCA9507D is documented as a 3.3 V to 5 V, 400 kHz, 18-meter extender in an 8-pin SOIC package. The cross-reference information cites LTC4307IDD-1#TRPBF as a functional equivalent, but it does not verify identical pin assignments or footprint compatibility. PCA9507D is therefore the safer choice when the PCB was designed specifically around its NXP pinout.

Data referensi engineering untuk PCA9507D — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose PCA9507D when a design needs bidirectional buffering, 3.3 V to 5 V level translation, and extension of an I2C, SMBus, or HDMI DDC bus by as much as 18 meters. It is particularly appropriate for board-to-board cables, mixed-voltage logic domains, and display control links operating at or below 400 kHz. PCA9507D,112 and PCA9507DP,118 are same-family order-code alternatives with the same stated core function and 8-pin SOIC package, so selection should account for exact ordering, reel orientation, traceability, and availability. Do not select a generic I2C buffer merely by function: its pin assignments, enable requirements, supply-voltage limits, and propagation behavior must match the PCA9507D footprint. If no level translation or extended distance is needed, a direct two-wire connection remains the simpler and lower-loss solution.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini PCA9507D,112 PCA9507DP,118 PCA9507D,118
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Product Function 2-wire serial bus extender 2-wire serial bus extender 2-wire serial bus extender 2-wire serial bus extender
Maximum Bus Frequency 400 kHz 400 kHz 400 kHz 400 kHz
Level Shift Range 3.3 V to 5 V 3.3 V to 5 V 3.3 V to 5 V 3.3 V to 5 V
Maximum Bus Extension 18 m 18 m 18 m 18 m
Channel Count 1 channel 1 channel 1 channel 1 channel
Supported Buses I2C, SMBus, HDMI DDC I2C, SMBus, HDMI DDC I2C, SMBus, HDMI DDC I2C, SMBus, HDMI DDC
Supply Architecture Dual supply Dual supply Dual supply Dual supply

Diferensiator Kunci

  • Combines bus extension and voltage translation (vsPCA9507D,112)
  • Supports a 400 kHz two-wire interface (vsPCA9507DP,118)
  • Bidirectional buffering preserves normal bus operation (vsPCA9507D,118)

Catatan Desain

Place the PCA9507D near the physical transition between the local and remote I2C or SMBus segments. Keep the SDA and SCL routes short on each side, maintain a continuous ground reference between boards, and place the relevant pull-up resistors close to the devices that use each voltage domain. For long cables, terminate the extended bus according to the manufacturer application guidance and account for connector capacitance before increasing pull-up strength.

Use the 400 kHz operating limit as an upper design boundary and evaluate the complete bus at the intended clock rate. I2C and SMBus rise time depends on bus capacitance and pull-up resistance, so a short nominal cable does not necessarily guarantee acceptable signal quality. Check the source and destination devices for their minimum high-time and rise-time requirements, and verify both buffered segments with the final harness and pull-up values.

Provide clean supply connections to both sides of the PCA9507D because its dual-supply architecture supports level translation between different logic domains. Confirm the accepted supply range for each side from the NXP manufacturer datasheet before assigning 3.3 V or 5 V rails. Keep the ground pins connected to the system ground without placing long return-current loops between the extender and the cable termination.

Do not treat the PCA9507D as a general-purpose protocol converter or assume that the maximum 18-meter rating is independent of bus capacitance and clock rate. Also avoid replacing it solely because another IC is described as an I2C repeater. Verify the exact pin assignments, supply voltages, enable behavior, pull-up strategy, and propagation requirements from the manufacturer datasheet, especially when making a production substitution.

Informasi Konformitas

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Compliant

The product catalog lists EU RoHS compliance, REACH compliance, and DRC Conflict Free status. No separate lead-free, halogen-free, or automotive qualification statement was confirmed.

Data disahkan pada: 2026-11-19 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

PCA9507D datasheet PCA9507D datasheet pdf PCA9507D pinout PCA9507D schematic PCA9507D equivalent PCA9507D replacement PCA9507D cross reference PCA9507D footprint PCA9507D price PCA9507D stock NXP PCA9507D PCA9507D 400kHz I2C extender PCA9507D 18m bus extension PCA9507D HDMI DDC application PCA9507D vs PCA9507D,112

Komponen dan Istilah Terkait

NXP Semiconductors PCA9507D PCA9507D,112 PCA9507DP,118 PCA9507D,118 two-wire serial bus extender I2C bus SMBus HDMI Display Data Channel bidirectional buffer level translator interface IC signal buffer semiconductor SOIC-8 SOIC package family surface mount SMD 400 kHz I2C 3.3 V to 5 V level shifting 18 meter bus extension RoHS REACH DRC Conflict Free
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ