PCA9548ADW - 8-Channel I2C Switch with Reset | Texas Instruments
MPN: PCA9548ADW ✓ AktifPCA9548ADW Ringkasan
An I2C switch is a bus-interface integrated circuit that extends or isolates a two-wire serial bus. The PCA9548ADW belongs to the bidirectional translating-switch class of interface controllers. Its upstream SCL and SDA connections communicate with a system master, while eight selectable downstream pairs connect individual sensors, EEPROMs, analog-to-digital converters, or other I2C peripherals. Voltage-level translation allows devices operating at different logic levels to share the switched bus.
The main functional features include eight individually selectable bidirectional translating switches, compatibility with I2C and SMBus systems, and an active-low reset input. Three hardware address pins allow up to eight PCA9548A devices to coexist on one upstream bus. Power-up initialization deselects the downstream channels, and the reset function lets a system master recover the switch state following a timeout or other abnormal bus condition.
The PCA9548ADW is controlled through the upstream I2C interface. A channel-select register identifies which one or more downstream channels should be connected, allowing unused channels to remain isolated. Bidirectional translation means that clock and data signals can propagate in either direction, supporting normal controller-to-peripheral traffic as well as acknowledged clock stretching when required by a downstream device.
Typical uses include sensor aggregation, power-management controllers, smart-home equipment, industrial instrumentation, data acquisition, and embedded systems that need more I2C addresses or physical bus branches than the host bus provides. Separate downstream branches also reduce the capacitive loading associated with connecting many devices directly to one long shared bus.
Designers should follow the pin-description table and recommended application circuit in the Texas Instruments datasheet when assigning address pins, bypass capacitors, reset behavior, and pull-ups. Confirm that every downstream device supports the selected voltage levels, ensure pull-up placement follows the bus topology, and review the operating temperature range of -40°C to +85°C against the product's environmental requirements.
This product record combines the verified package and device description, practical bus-routing guidance, interface comparisons, and a focused explanation of channel isolation, reset control, hardware addressing, and voltage translation. These engineering details help designers determine whether the PCA9548ADW provides the required bus segmentation without introducing unnecessary board or firmware complexity.
Alternatif penggantian untuk PCA9548ADW — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
PCA9548ADWG4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PCA9548ADW Rating Maksimal & Karakteristik Listrik
| Number of Channels | 8 channels |
| Switch Type | 8 bidirectional translating switches |
| Upstream Bus | 1 SCL/SDA pair |
| Downstream Buses | 8 SCL/SDA pairs |
| Supported Bus Standards | I2C and SMBus compatible |
| Reset Input | Active-low |
| Hardware Address Pins | 3 pins |
| Maximum Devices on One Upstream Bus | 8 devices |
| Channel Selection | Selected through the I2C bus |
| Power-Up Channel State | All switch channels deselected |
| Rentang Suhu Kerja | -40°C to +85°C |
| Paket | 24-pin SOIC |
| Tipe Mounting | Surface mount |
PCA9548ADW 24-pin soic Diamant Konfigurasi Panduan
Konfigurasi pin untuk PCA9548ADW (24-pin soic pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk PCA9548ADW.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
PCA9548ADW cocok untuk 6 aplikasis: Industrial Sensor Aggregation, Data Acquisition Modules, Smart Home and IoT Controllers, Power Management Control, Embedded System Bus Expansion, Test and Measurement Equipment.
Industrial Sensor Aggregation
The PCA9548ADW is well suited to industrial systems that connect multiple I2C sensors to one controller. Eight independently selectable downstream SCL/SDA pairs let the firmware isolate sensor branches, address them separately, and avoid placing every device on one shared bus segment. The active-low reset input provides a recovery mechanism after a timeout, while three hardware address pins permit multiple switch devices on the same upstream bus. Designs should verify each sensor’s voltage range, confirm that the selected logic levels match the PCA9548ADW translation capability, and review pull-up placement for the intended topology. The -40°C to +85°C operating range supports equipment deployed across many industrial environments when the complete system has been qualified for its target conditions.
Data Acquisition Modules
The PCA9548ADW can partition analog-to-digital converters, digital-to-digital converters, EEPROMs, and other serial peripherals in a data-acquisition module. Each of the eight downstream channel pairs may be selected independently through the I2C control register, which simplifies addressing and permits unused branches to remain isolated. This arrangement can also reduce bus loading compared with connecting every peripheral directly to the host controller. For high-speed or long-trace designs, confirm the maximum bus rate, capacitance, pull-up resistor placement, and translation voltages in the manufacturer datasheet. The reset input is especially useful in acquisition systems that need to recover from a stalled peripheral or unexpected bus condition without resetting the entire controller board.
Smart Home and IoT Controllers
The PCA9548ADW fits compact smart-home and IoT controllers that must support more I2C peripherals than are practical on one shared bus. Eight selectable downstream channels can serve separate sensor, communication, memory, and auxiliary-function branches while the host uses one upstream address. Three hardware address pins allow as many as eight PCA9548A devices to share the upstream bus, supporting hierarchical expansion. In a connected product, the active-low reset path can be driven by a supervisor or controller to restore a known switch state after a fault. Board planners should keep short I2C traces, provide the required pull-ups, maintain a continuous ground reference across voltage domains, and check the downstream logic voltage against the translation specifications before release.
Power Management Control
The PCA9548ADW can organize I2C-compatible power-management controllers, digital potentiometers, monitoring devices, and configuration EEPROMs on a shared platform. Independent channel selection allows the system firmware to isolate an auxiliary rail, disable a bank of devices during a fault, or sequence access to sensitive peripherals. The three hardware address inputs support multiple addressed switch groups without requiring separate host buses. Because power-management boards often combine several voltage domains, engineers should verify every downstream pull-up and logic level against the supported translation range. The active-low reset input also offers a controlled recovery point when a monitored peripheral stops acknowledging the bus, provided the reset pulse satisfies the timing requirements in the manufacturer datasheet.
Embedded System Bus Expansion
The PCA9548ADW gives an embedded controller additional I2C branches without requiring a dedicated multiplexed controller for each group of peripherals. Eight bidirectional translating switches support both command traffic and clock stretching, while independent selection allows the firmware to activate only the bank required for a task. Three hardware address pins allow several PCA9548A devices on one upstream bus, making the architecture useful for modular embedded platforms. Integration should account for the selected channel’s address, bus capacitance, pull-up values, reset polarity, and startup behavior. At power-up, all channels remain deselected until the host writes the desired selection, preventing unintended communication with downstream devices before firmware initialization is complete.
Test and Measurement Equipment
The PCA9548ADW is useful in test and measurement equipment that connects several low-speed I2C or SMBus instruments, converters, memories, or calibration devices to a central controller. The eight downstream branches provide physical separation and selectable addressing, which can simplify fixture routing and reduce the load on one long bus. The reset input provides a deterministic way to reinitialize the switch after a timeout, while three address pins support a larger instrument architecture. Designers should account for cable capacitance, connector-induced transients, pull-up placement near the master and devices, and the PCA9548ADW’s -40°C to +85°C operating range. For laboratory equipment, confirm that every connected peripheral supports the selected downstream voltage level before finalizing the bus segmentation.
Data referensi engineering untuk PCA9548ADW — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini |
|---|---|
| Package | 24-pin SOIC |
| Brand | Texas Instruments |
| Number of Channels | 8 |
| Bus Compatibility | I2C and SMBus compatible |
| Switch Direction | Bidirectional |
| Hardware Address Pins | 3 |
| Maximum Addressable Devices | 8 |
| Reset Control | Active-low reset input |
| Power-Up State | All channels deselected |
| Operating Temperature Range | -40°C to +85°C |
Diferensiator Kunci
- Eight independently selectable downstream branches (vsPCA9548ADWR)
- Active-low reset and hardware addressing (vsPCA9548APWRG4)
- 24-pin SOIC footprint (vsPCA9548APWRG4)
Catatan Desain
Route the upstream SCL and SDA traces as a dedicated pair and keep the eight downstream branches short and symmetrical where practical. Place pull-up resistors in accordance with the system topology rather than duplicating unnecessary pull-ups on every branch. Check capacitance and rise-time limits against the maximum clock frequency in the manufacturer datasheet, especially when long traces or connectors connect downstream peripherals.
Place the required bypass capacitor close to the supply and ground pins, with a short return path that avoids switching-current loops. Confirm the exact capacitor value, voltage rating, and operating limits from the Texas Instruments application circuit. Because the PCA9548ADW performs voltage-level translation, also verify the input and downstream voltage ranges for every channel before connecting mixed-voltage peripherals.
Do not assume that power-up channel selection is inherited from a previous reset. The device initializes with all downstream channels deselected, so the controller must write the required channel mask after reset. Also treat the three address pins as part of the permanent bus configuration, and verify the reset polarity in the system schematic so an active-low signal cannot accidentally connect unintended branches.
Informasi Konformitas
The accessible product information identifies the PCA9548ADW as a 24-SOIC interface IC with an operating temperature range of -40°C to +85°C. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was available for extraction.