Texas Instruments

PCA9548ADW - 8-Channel I2C Switch with Reset | Texas Instruments

部品番号: PCA9548ADW ✓ 生産中
I2C and SMBus compatible Rds(on) 24-pin SOIC Package
MOQ: 1 |

PCA9548ADW 概要

The Texas Instruments PCA9548ADW is an eight-channel bidirectional I2C and SMBus switch with an active-low reset input, three hardware address pins, and a 24-pin SOIC package. It fans one upstream SCL/SDA pair into eight downstream channels, with each channel selected independently through the I2C bus. The device is designed for systems in which multiple low-voltage bus peripherals share common serial-clock and serial-data wiring.

An I2C switch is a bus-interface integrated circuit that extends or isolates a two-wire serial bus. The PCA9548ADW belongs to the bidirectional translating-switch class of interface controllers. Its upstream SCL and SDA connections communicate with a system master, while eight selectable downstream pairs connect individual sensors, EEPROMs, analog-to-digital converters, or other I2C peripherals. Voltage-level translation allows devices operating at different logic levels to share the switched bus.

The main functional features include eight individually selectable bidirectional translating switches, compatibility with I2C and SMBus systems, and an active-low reset input. Three hardware address pins allow up to eight PCA9548A devices to coexist on one upstream bus. Power-up initialization deselects the downstream channels, and the reset function lets a system master recover the switch state following a timeout or other abnormal bus condition.

The PCA9548ADW is controlled through the upstream I2C interface. A channel-select register identifies which one or more downstream channels should be connected, allowing unused channels to remain isolated. Bidirectional translation means that clock and data signals can propagate in either direction, supporting normal controller-to-peripheral traffic as well as acknowledged clock stretching when required by a downstream device.

Typical uses include sensor aggregation, power-management controllers, smart-home equipment, industrial instrumentation, data acquisition, and embedded systems that need more I2C addresses or physical bus branches than the host bus provides. Separate downstream branches also reduce the capacitive loading associated with connecting many devices directly to one long shared bus.

Designers should follow the pin-description table and recommended application circuit in the Texas Instruments datasheet when assigning address pins, bypass capacitors, reset behavior, and pull-ups. Confirm that every downstream device supports the selected voltage levels, ensure pull-up placement follows the bus topology, and review the operating temperature range of -40°C to +85°C against the product's environmental requirements.

This product record combines the verified package and device description, practical bus-routing guidance, interface comparisons, and a focused explanation of channel isolation, reset control, hardware addressing, and voltage translation. These engineering details help designers determine whether the PCA9548ADW provides the required bus segmentation without introducing unnecessary board or firmware complexity.

ドロップイン代替品: PCA9548ADW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

PCA9548ADWG4

✅ ドロップイン
📦 24-pin SOIC
Automotive-grade ordering option with the same 24-pin SOIC footprint and 8-channel PCA9548A function; no key numeric difference is stated in the product listing.

📋 参考代替品(カタログ未掲載)

PCA9548ADW 最大定格&電気的特性

Number of Channels 8 channels
Switch Type 8 bidirectional translating switches
Upstream Bus 1 SCL/SDA pair
Downstream Buses 8 SCL/SDA pairs
Supported Bus Standards I2C and SMBus compatible
Reset Input Active-low
Hardware Address Pins 3 pins
Maximum Devices on One Upstream Bus 8 devices
Channel Selection Selected through the I2C bus
Power-Up Channel State All switch channels deselected
動作温度範囲 -40°C to +85°C
パッケージ 24-pin SOIC
実装タイプ Surface mount

PCA9548ADW 24-pin soic ピン配置ガイド

PCA9548ADW (24-pin soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

PCA9548ADW の 24-pin soic パッケージピン配置図

詳細なピン配置データはありません: PCA9548ADW.

詳細は データシート をご参照ください。

主な用途

PCA9548ADW の用途: 6 件s: Industrial Sensor Aggregation, Data Acquisition Modules, Smart Home and IoT Controllers, Power Management Control, Embedded System Bus Expansion, Test and Measurement Equipment.

🏭

Industrial Sensor Aggregation

The PCA9548ADW is well suited to industrial systems that connect multiple I2C sensors to one controller. Eight independently selectable downstream SCL/SDA pairs let the firmware isolate sensor branches, address them separately, and avoid placing every device on one shared bus segment. The active-low reset input provides a recovery mechanism after a timeout, while three hardware address pins permit multiple switch devices on the same upstream bus. Designs should verify each sensor’s voltage range, confirm that the selected logic levels match the PCA9548ADW translation capability, and review pull-up placement for the intended topology. The -40°C to +85°C operating range supports equipment deployed across many industrial environments when the complete system has been qualified for its target conditions.

📊

Data Acquisition Modules

The PCA9548ADW can partition analog-to-digital converters, digital-to-digital converters, EEPROMs, and other serial peripherals in a data-acquisition module. Each of the eight downstream channel pairs may be selected independently through the I2C control register, which simplifies addressing and permits unused branches to remain isolated. This arrangement can also reduce bus loading compared with connecting every peripheral directly to the host controller. For high-speed or long-trace designs, confirm the maximum bus rate, capacitance, pull-up resistor placement, and translation voltages in the manufacturer datasheet. The reset input is especially useful in acquisition systems that need to recover from a stalled peripheral or unexpected bus condition without resetting the entire controller board.

🧩

Smart Home and IoT Controllers

The PCA9548ADW fits compact smart-home and IoT controllers that must support more I2C peripherals than are practical on one shared bus. Eight selectable downstream channels can serve separate sensor, communication, memory, and auxiliary-function branches while the host uses one upstream address. Three hardware address pins allow as many as eight PCA9548A devices to share the upstream bus, supporting hierarchical expansion. In a connected product, the active-low reset path can be driven by a supervisor or controller to restore a known switch state after a fault. Board planners should keep short I2C traces, provide the required pull-ups, maintain a continuous ground reference across voltage domains, and check the downstream logic voltage against the translation specifications before release.

⚡

Power Management Control

The PCA9548ADW can organize I2C-compatible power-management controllers, digital potentiometers, monitoring devices, and configuration EEPROMs on a shared platform. Independent channel selection allows the system firmware to isolate an auxiliary rail, disable a bank of devices during a fault, or sequence access to sensitive peripherals. The three hardware address inputs support multiple addressed switch groups without requiring separate host buses. Because power-management boards often combine several voltage domains, engineers should verify every downstream pull-up and logic level against the supported translation range. The active-low reset input also offers a controlled recovery point when a monitored peripheral stops acknowledging the bus, provided the reset pulse satisfies the timing requirements in the manufacturer datasheet.

🔧

Embedded System Bus Expansion

The PCA9548ADW gives an embedded controller additional I2C branches without requiring a dedicated multiplexed controller for each group of peripherals. Eight bidirectional translating switches support both command traffic and clock stretching, while independent selection allows the firmware to activate only the bank required for a task. Three hardware address pins allow several PCA9548A devices on one upstream bus, making the architecture useful for modular embedded platforms. Integration should account for the selected channel’s address, bus capacitance, pull-up values, reset polarity, and startup behavior. At power-up, all channels remain deselected until the host writes the desired selection, preventing unintended communication with downstream devices before firmware initialization is complete.

🖥️

Test and Measurement Equipment

The PCA9548ADW is useful in test and measurement equipment that connects several low-speed I2C or SMBus instruments, converters, memories, or calibration devices to a central controller. The eight downstream branches provide physical separation and selectable addressing, which can simplify fixture routing and reduce the load on one long bus. The reset input provides a deterministic way to reinitialize the switch after a timeout, while three address pins support a larger instrument architecture. Designers should account for cable capacitance, connector-induced transients, pull-up placement near the master and devices, and the PCA9548ADW’s -40°C to +85°C operating range. For laboratory equipment, confirm that every connected peripheral supports the selected downstream voltage level before finalizing the bus segmentation.

What is the PCA9548ADW?
The PCA9548ADW is an eight-channel bidirectional I2C and SMBus switch from Texas Instruments in a 24-pin SOIC package. It connects one upstream SCL/SDA pair to eight downstream SCL/SDA pairs, with individual channels selected through the I2C bus. According to the Texas Instruments datasheet, the device also includes an active-low reset input, three hardware address pins, and power-up initialization that deselects all downstream channels.
How many I2C channels does the PCA9548ADW provide?
The PCA9548ADW provides eight independently selectable downstream I2C channels. One upstream SCL/SDA pair connects to the system master, while the eight downstream pairs connect remote bus devices. According to the Texas Instruments datasheet, any individual channel or combination of channels can be selected through the I2C control register, allowing unused branches to remain disconnected.
Does the PCA9548ADW support SMBus?
Yes, the PCA9548ADW is compatible with both I2C and SMBus systems. Its eight bidirectional translating switches route SCL and SDA signals between one upstream bus and eight downstream branches. According to the Texas Instruments datasheet, the bidirectional architecture supports signal flow in both directions, while independent channel selection lets a controller isolate a peripheral branch when it is not being addressed.
What does the active-low reset input on the PCA9548ADW do?
The active-low RESET input lets a system master restore the PCA9548ADW to a known state after a bus timeout or other improper operation. According to the Texas Instruments datasheet, asserting reset deselects all switch channels and initializes the I2C or SMBus state machine. Deasserting reset allows the host to write a new channel-selection value and reconfigure the downstream bus connections.
How are hardware addresses assigned on the PCA9548ADW?
The PCA9548ADW uses three hardware address pins to establish its I2C slave address, allowing up to eight devices to operate on the same upstream bus. According to the Texas Instruments datasheet, the address pins are sampled by the device and combine with the fixed portion of the slave address. This arrangement permits multiple switched bus groups without requiring a separate upstream controller for each group.
What happens to the channels when the PCA9548ADW powers up?
All eight downstream channels are deselected when the PCA9548ADW powers up. According to the Texas Instruments datasheet, this initialization prevents a downstream peripheral from being connected unintentionally before the system master configures the switch. The host can then select the required SCx and SDx paths through the I2C channel-selection register.
Where can I download the PCA9548ADW datasheet PDF?
The PCA9548ADW datasheet is available from the Texas Instruments product documentation and from the datasheet links associated with the listed product pages. The manufacturer datasheet is the authoritative document for the complete pinout, electrical limits, control-register map, and recommended application circuit. Search for “PCA9548ADW datasheet” and select the 24-pin SOIC device rather than a package or reel-ordering variant.
Where can I find the PCA9548ADW pinout?
The PCA9548ADW pinout is located in the pin-configuration section of the Texas Instruments manufacturer datasheet. The component uses a 24-pin SOIC, and the diagram identifies the power pins, upstream and downstream SCL/SDA connections, reset input, and three hardware address pins. Use that pin-description table when assigning PCB nets, especially for exposed versus no-connect positions on the SOIC footprint.
What can replace the PCA9548ADW as a drop-in part?
No independently verified drop-in replacement for the PCA9548ADW was identified in the available component cross-reference results. The PCA9548ADWR listing represents the reel-packaging order code rather than a distinct electrically optimized substitute, while the cited PCA9548APWRG4 comparison uses a different package option. Before replacing the device, verify pin compatibility, voltage levels, address behavior, reset timing, and the 24-SOIC footprint in the manufacturer datasheet.
Is the PCA9548ADW the same as the PCA9548ADWR?
The PCA9548ADW and PCA9548ADWR identify the same PCA9548A device with different orderable packaging details; both listings describe a 24-SOIC translating switch interface. The distinction is primarily how the component is supplied for manufacturing, not an indication of eight different electrical functions. Engineers should still compare the complete ordering information before substituting one order code for the other.
When should I choose the PCA9548ADW over another I2C switch?
Choose the PCA9548ADW when the design needs eight individually controlled I2C branches, an active-low reset input, and three hardware address pins. According to the Texas Instruments datasheet, each downstream channel can be enabled independently, making the device useful for partitioning sensors, EEPROMs, or data converters across separate bus branches. Select another switch instead when the design requires fewer channels, a different voltage range, another package, or bus features not provided by this device.
Is the PCA9548ADW suitable for industrial sensor aggregation?
The PCA9548ADW is suitable for industrial sensor aggregation when the connected devices use compatible I2C or SMBus voltage levels and the system remains within -40°C to +85°C. Its eight independently selectable downstream channels reduce the need for multiple upstream buses, while three address pins permit several switch devices on one controller bus. Verify downstream capacitance, pull-up placement, grounding, and any isolation requirements during the board-level design review.
Where can I buy the PCA9548ADW online?
The PCA9548ADW can be requested through the “Request a Quote” form on this page. The form is the appropriate route for current availability, commercial terms, lot traceability, and delivery scheduling. The active product listings and manufacturer documentation can also be used to confirm the exact 24-pin SOIC device and its orderable packaging information.
What is the price of the PCA9548ADW?
Current pricing for the PCA9548ADW should be obtained through the “Request a Quote” form on this page because commercial terms and availability can change with market conditions, quantity, and shipment requirements. The form allows buyers to request the exact PCA9548ADW order code and supporting supply information without relying on a static price table that may become outdated.
What is the lead time and stock status for the PCA9548ADW?
Current lead time and stock status for the PCA9548ADW should be requested through the “Request a Quote” form on this page. Include the required quantity, target shipment date, and whether factory-sealed reels or cut tape are acceptable. This allows the supplier to confirm the appropriate 24-SOIC order code, current allocation, and delivery plan for the specific procurement request.

エンジニアリング参考データ: PCA9548ADW — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the PCA9548ADW when a design requires eight independently selectable, bidirectional I2C or SMBus branches and the board already accommodates a 24-pin SOIC footprint. Its three hardware address pins allow several switch devices to share one upstream controller bus, while the active-low reset input supports controlled recovery from a timeout or invalid bus state. This combination is particularly useful in sensor aggregators, industrial controllers, test equipment, and power-management systems. The PCA9548ADWR is the reel-packaging order code for essentially the same device and should be selected for manufacturing logistics rather than as a different electrical solution. The cited PCA9548APWRG4 should not be treated as a direct drop-in replacement without verifying its package, pinout, voltage range, address scheme, and reset implementation. If the design needs fewer than eight channels, lower operating current, a smaller package, or a different translation range, a different switch may provide a simpler solution.

代替品との比較

パラメータ この製品
Package 24-pin SOIC
Brand Texas Instruments
Number of Channels 8
Bus Compatibility I2C and SMBus compatible
Switch Direction Bidirectional
Hardware Address Pins 3
Maximum Addressable Devices 8
Reset Control Active-low reset input
Power-Up State All channels deselected
Operating Temperature Range -40°C to +85°C

主な差別化要因

  • Eight independently selectable downstream branches (vs PCA9548ADWR)
  • Active-low reset and hardware addressing (vs PCA9548APWRG4)
  • 24-pin SOIC footprint (vs PCA9548APWRG4)

設計ノート

Route the upstream SCL and SDA traces as a dedicated pair and keep the eight downstream branches short and symmetrical where practical. Place pull-up resistors in accordance with the system topology rather than duplicating unnecessary pull-ups on every branch. Check capacitance and rise-time limits against the maximum clock frequency in the manufacturer datasheet, especially when long traces or connectors connect downstream peripherals.

Place the required bypass capacitor close to the supply and ground pins, with a short return path that avoids switching-current loops. Confirm the exact capacitor value, voltage rating, and operating limits from the Texas Instruments application circuit. Because the PCA9548ADW performs voltage-level translation, also verify the input and downstream voltage ranges for every channel before connecting mixed-voltage peripherals.

Do not assume that power-up channel selection is inherited from a previous reset. The device initializes with all downstream channels deselected, so the controller must write the required channel mask after reset. Also treat the three address pins as part of the permanent bus configuration, and verify the reset polarity in the system schematic so an active-low signal cannot accidentally connect unintended branches.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The accessible product information identifies the PCA9548ADW as a 24-SOIC interface IC with an operating temperature range of -40°C to +85°C. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was available for extraction.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

PCA9548ADW datasheet PCA9548ADW pinout PCA9548ADW datasheet pdf PCA9548ADW equivalent PCA9548ADW replacement PCA9548ADW cross reference PCA9548ADW vs PCA9548ADWR PCA9548ADW footprint PCA9548ADW price PCA9548ADW stock Texas Instruments PCA9548ADW PCA9548ADW 24-SOIC pinout PCA9548ADW application circuit

関連部品&用語

Texas Instruments PCA9548ADW PCA9548ADWR PCA9548APWRG4 I2C switch SMBus switch bidirectional translating switch interface controller bus multiplexer I2C SMBus serial clock serial data active-low reset hardware address pins voltage-level translation channel selection 24-pin SOIC SOIC family surface-mount package sensor aggregation industrial control data acquisition smart-home controller
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示