Pemberitahuan Beli Terakhir: PCA9600D mendekati akhir hidup. Tanggal order terakhir: Kontak kami. Lihat bagian alternatif yang tersedia →
NXP Semiconductors

PCA9600D - 1MHz Dual I2C Bus Buffer | NXP Semiconductors

MPN: PCA9600D ✗ Akhir Hidup
2.7 V to 5.5 V Vdss 8-pin SOIC Package 1 MHz Speed
MOQ: 1 |

PCA9600D Ringkasan

The NXP Semiconductors PCA9600D is a 1 MHz dual bidirectional I2C-bus buffer designed to isolate bus capacitance in point-to-point and multipoint systems supporting loads up to 4000 pF. It is housed in an 8-pin SOIC package and is a higher-speed implementation of the P82B96 bus-buffer concept.

An I2C bus buffer, also called a bus repeater or bidirectional bus isolator, is an interface IC that separates a high-capacitance bus section from the controller-side bus. This separation reduces the capacitive loading seen by the master while preserving bidirectional clock and data signaling. In the power-management hierarchy, the PCA9600D is not a regulator; it is an interface IC within the broader I2C and bus-management semiconductor category.

The PCA9600D provides two buffered bus channels, a maximum operating frequency of 1 MHz, and support for bus capacitance up to 4000 pF. Its bidirectional architecture allows each channel to carry clock and data signals in either direction. The device is identified as a dual bidirectional bus buffer and is listed in SO-8 packaging, making it appropriate for compact industrial, communications, consumer, and embedded control systems.

Technically, the PCA9600 addresses the rise-time and data-integrity problems created when an I2C bus connects multiple branches or remote cable segments. Buffering one side from the other limits the capacitance directly driven by the controller. Because the buffer is non-latching, it remains transparent to normal I2C traffic rather than requiring a separate protocol or latched control state. The manufacturer describes the PCA9600 as a higher-speed alternative to the P82B96.

Typical uses include extending an I2C controller to a remote sensor or display module, isolating high-capacitance backplanes, connecting two bus segments, and supporting point-to-point links between boards with different loading conditions. In these applications, the buffer is normally placed in series with the relevant SCL or SDA conductor, with pull-up resistors placed separately on each isolated segment.

PCB implementation should keep each side of the buffer electrically distinct. Configure pull-up resistor networks independently on the controller-side and remote-side buses, maintain the device ground connection close to pin 1, and route each channel away from high-current switching nodes. Confirm rise time at the worst-case bus capacitance rather than assuming that a nominal 1 MHz operating rate applies to every wiring configuration.

This page combines the NXP product description, manufacturer datasheet link, lifecycle information, capacity and frequency characteristics, package details, and application-specific engineering guidance. It also distinguishes true drop-in ordering variants from functional alternatives, helping engineers evaluate PCB reuse, bus capacitance, voltage compatibility, and sourcing constraints before selecting a replacement.

Alternatif penggantian untuk PCA9600D — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian PCA9600D (sama faktor bentuk dan footprint) — berbeda di dalam Pin Count.

NXP Semiconductors
Pin Count: 8
Bandingkan dengan PCA9600D →

PCA9600D,118

✅ Drop-In
NXP Semiconductors
📦 SOIC-8
Dual bidirectional I²C-bus buffer / ReDriver · 2 (SDA + SCL) · 1 MHz · 4000 pF · 2.5 V to 15 V · Standard, Fast, Fast-mode Plus (Fm+) I²C-bus · Internal (no DIR pin required) · Non-latching

Kontak untuk harga

Lihat Datasheet →

PCA9600D,112

✅ Drop-In
📦 SOIC-8
Same PCA9600D device and electrical function; the -112 suffix identifies an ordering or packing configuration, with no documented change to 1 MHz frequency or 4000 pF bus-capacitance capability

📋 Alternatif referensi (tidak dalam katalog)

PCA9600D,118

✅ Drop-In
NXP Semiconductors
📦 SOIC-8
Dual bidirectional I²C-bus buffer / ReDriver · 2 (SDA + SCL) · 1 MHz · 4000 pF · 2.5 V to 15 V · Standard, Fast, Fast-mode Plus (Fm+) I²C-bus · Internal (no DIR pin required) · Non-latching

Kontak untuk harga

Lihat Datasheet →

PCA9600D Spesifikasi

Device Type Dual bidirectional I2C-bus buffer
Bidirectional Channels 2 channels
Maximum Bus Frequency 1 MHz
Maximum Bus Capacitance 4000 pF
Tegangan Pemuat Kerja 2.7 V to 5.5 V
Rentang Suhu Kerja -40 °C to +85 °C
Package Type 8-pin SOIC
Jumlah Pin 8 pins
Tipe Mounting Surface mount
Logic Interface Non-latching bidirectional logic interface
Supported Bus Topology Point-to-point and multipoint
Buffer Family PCA9600 series
Related Device P82B96

PCA9600D 8-pin soic Diamant Konfigurasi Panduan

Konfigurasi pin untuk PCA9600D (8-pin soic pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 8-pin soic untuk PCA9600D

Tidak ada data diatribut pin yang tersedia untuk PCA9600D.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

PCA9600D cocok untuk 6 aplikasis: Long-Capacitance I2C Sensor Bus, Board-to-Board I2C Isolation, Multipoint I2C Backplane, Remote Display and Control Interface, Industrial Control Module, Communications Equipment Management Bus.

🧩

Long-Capacitance I2C Sensor Bus

The PCA9600D is suitable when an I2C master must communicate with a remote group of sensors through wiring whose total capacitance approaches the supported 4000 pF limit. Buffering the remote branch prevents that capacitance from appearing directly at the controller-side bus, improving the possibility of maintaining operation at the device's 1 MHz maximum frequency. Place the buffer in series with the relevant SDA or SCL conductor and provide independent pull-up networks on both sides so each isolated segment has its own rise-time behavior.

🔧

Board-to-Board I2C Isolation

The PCA9600D can isolate an I2C connection between two circuit boards when cable length, connector capacitance, or a separate bus segment would otherwise burden the host controller. Its two independent bidirectional paths support SDA and SCL, while the non-latching logic interface preserves ordinary I2C behavior. The 4000 pF capacitance capability gives designers room for a remote branch, but signal rise time must still be checked using the actual pull-up resistance, voltage, and total wiring load.

🌐

Multipoint I2C Backplane

The PCA9600D supports multipoint arrangements where one I2C controller reaches several branches through a buffered segment. By dividing the network into a controller-side bus and a remote bus, the device reduces the capacitance that the controller must drive and helps each section retain usable rise time. Its 1 MHz maximum operating frequency accommodates relatively fast I2C traffic, although branch length, stub geometry, connector loading, and pull-up selection determine whether the complete network meets that target.

📺

Remote Display and Control Interface

The PCA9600D can buffer an I2C link to a remote display, touch controller, or configuration device when the interconnect adds substantial capacitance. The separation reduces the load presented to the host I2C controller, while the two bidirectional channels handle both clock and data without a latched control protocol. Because the PCA9600D is an End of Life part, engineers should reserve it for maintenance and existing qualified designs or verify lifecycle availability before committing a new platform.

🏭

Industrial Control Module

The PCA9600D fits industrial control modules in which an embedded controller operates a bus across multiple connectorized daughterboards. A buffered branch can isolate accumulated connector and trace capacitance, supporting the family-level 4000 pF capability and up to 1 MHz operation. Keep the buffered sides electrically separated, return the device ground to the quiet signal ground, and validate timing at the longest supported cable and highest temperature. Any new design must account for the manufacturer's End of Life designation.

🖥️

Communications Equipment Management Bus

The PCA9600D can support an I2C management bus inside communications equipment where backplane routing, connectors, and peripheral density create a capacitive load near the supported 4000 pF limit. Its dual-channel architecture provides separate paths for clock and data, and its non-latching operation requires no dedicated bus-enable protocol. Use it where the board already targets PCA9600 and has been validated for the relevant electrical timing. For new platforms, evaluate lifecycle risk alongside the device's 1 MHz capability and isolated-bus architecture.

What is the PCA9600D used for?
The PCA9600D is a dual bidirectional I2C-bus buffer used to isolate bus capacitance on long, heavily loaded, or multipoint I2C connections. According to the NXP product page and manufacturer datasheet, it supports point-to-point and multipoint configurations with bus capacitance up to 4000 pF. Each buffered channel separates the controller-side wiring from the remote bus, reducing the load presented to the I2C master while preserving bidirectional clock and data transfer.
What is the maximum frequency of the PCA9600D?
The PCA9600D operates at frequencies up to 1 MHz. The distributor listing identifies it as a one-channel re-driver with a 1 MHz specification, while the manufacturer describes the PCA9600 family as a higher-speed version of the P82B96. Actual SCL rise time still depends on pull-up resistance, bus capacitance, wiring, and voltage, so a 1 MHz design target requires signal-integrity validation with the intended bus load.
How much I2C bus capacitance can the PCA9600D support?
The PCA9600D supports I2C-bus loads of up to 4000 pF. This capability is stated in the NXP product description and datasheet and allows the buffer to isolate a remote branch or multipoint network whose capacitance would otherwise slow the controller-side signal. The 4000 pF figure applies to the buffered bus arrangement; trace, connector, branch, and pull-up capacitance must all be included in the worst-case load.
What is the difference between the PCA9600D and P82B96?
The PCA9600D is a higher-speed alternative to the P82B96 and provides a non-latching, bidirectional logic interface for I2C buses. The NXP manufacturer materials specifically identify PCA9600 as the higher-speed implementation. A mechanical or functional resemblance does not automatically establish pin-to-pin compatibility, so engineers changing a P82B96 design should compare the complete datasheet pinout, voltage range, timing limits, and enable behavior before reusing a PCB.
Can the PCA9600D replace PCA9600D,118 or PCA9600D,112?
PCA9600D,118 and PCA9600D,112 are orderable package or packing variants of the PCA9600D device, and they are the closest drop-in choices when their documented package and suffix configuration match the assembled PCB. The suffix identifies the specific ordering code rather than a different functional architecture. Confirm the manufacturer ordering table and the tape-and-reel or tube packing method before treating either ordering code as a substitute.
What is the best drop-in replacement for PCA9600D?
The closest documented drop-in choices are PCA9600D,118 and PCA9600D,112 because they identify NXP order variants of the same PCA9600D device. Their technical function, 1 MHz maximum frequency, 4000 pF bus-capacitance capability, and SO-8 package align with the target part. No separately documented cross-manufacturer part was confirmed as a guaranteed pin-to-pin replacement, so any substitution should be checked against the complete NXP pin and application tables.
Is PCA9600D the same as PCA9605D?
The PCA9600D and PCA9605D are related NXP bus-buffer families, but they are not automatically interchangeable. The PCA9600D is specified in the verified listings as a dual bidirectional bus buffer with 4000 pF bus-capacitance support and up to 1 MHz operation. PCA9605D is described in the comparison material as a simple two-wire bus buffer, so designers must compare channel count, enable behavior, logic thresholds, and pin assignments before considering a substitution.
Is the PCA9600D still active?
The PCA9600D is listed by NXP as End of Life. The manufacturer product page includes an End of Life overview and shipping-discontinuance information, so new production should not be assumed. For existing designs, verify remaining inventory and approved lifecycle-management options through the Request a Quote form on this page. Any replacement should be treated as a lifecycle and PCB-compatibility decision rather than an ordinary active-part procurement.
Where can I download the PCA9600D datasheet PDF?
The official NXP manufacturer datasheet is available from the PCA9600 data-sheet URL on this page. It defines the product specification and provides the authoritative source for pin assignments, timing, electrical limits, application diagrams, and ordering information. A third-party datasheet mirror also exists, but the NXP-hosted PDF should be preferred for design sign-off because it is the manufacturer's controlled copy.
Where can I find the PCA9600D pinout?
The PCA9600D uses an 8-pin SOIC package, and the pin-assignment diagram should be taken from the NXP manufacturer datasheet. The product excerpts identify the package and functional architecture but do not reproduce individual pin numbers, so this page does not assign names to pins without manufacturer confirmation. Before routing a PCB, use the datasheet pin-description table to identify the supply, ground, enable, and buffered bus terminals.
Where can I buy PCA9600D, and what is its price?
Use the Request a Quote form on this page to request the current PCA9600D price, stock position, minimum order quantity, and lead time. The part is marked End of Life by NXP, so availability may be limited and may change without notice. A current quantity-break price cannot be quoted from the product-page excerpts alone, and a formal quotation is the appropriate way to confirm the exact MPN and delivery requirements.
What is the lead time for PCA9600D?
The current PCA9600D lead time must be confirmed through the Request a Quote form on this page. NXP lists the device as End of Life, and no fixed production or stocking commitment is established by the available product information. For scheduled production, provide forecast quantities and required delivery dates so the sourcing team can identify remaining channel inventory or an acceptable lifecycle-managed alternative.
Is PCA9600D in stock?
Stock for PCA9600D should be checked through the Request a Quote form on this page. The device is an End of Life part, so an ordinary active-part stock assumption is inappropriate even if a distributor page remains accessible. The quotation response should confirm exact suffix, manufacturer packaging condition, quantity, and expected dispatch timing before the purchase order is released.
When should I choose PCA9600D over P82B96?
Choose PCA9600D when the design requires a higher-speed, non-latching bidirectional I2C buffer and supports buses with capacitance as high as 4000 pF. The manufacturer identifies PCA9600 as a higher-speed version of the P82B96. Retain the P82B96 only when an existing qualified design still meets current timing, lifecycle, availability, and sourcing requirements; the two devices should not be interchanged solely because both are bidirectional bus buffers.
What are the key specifications of PCA9600D that engineers should know?
The key PCA9600D specifications are a 1 MHz maximum operating frequency, support for I2C bus capacitance up to 4000 pF, two bidirectional buffering paths, a 2.7 V to 5.5 V operating supply range, and an 8-pin SOIC package. The NXP product description also identifies the device as a non-latching, point-to-point and multipoint-capable bus buffer. Designers should also account for its End of Life status during new-product planning.
Can PCA9600D isolate different voltage I2C bus sections?
The PCA9600D can provide a logic interface between a normal I2C bus and another higher-capacitance or different-voltage bus configuration, as described by NXP. The buffer is non-latching and bidirectional, allowing normal clock and data movement through the interface. Voltage compatibility still depends on the exact input and output thresholds, supply voltage, pull-up arrangement, and direction behavior specified in the manufacturer datasheet for the selected implementation.

Data referensi engineering untuk PCA9600D — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose PCA9600D when an existing design requires a non-latching, bidirectional I2C buffer that supports up to 4000 pF of bus capacitance and operates at up to 1 MHz. It is particularly appropriate for long point-to-point links, remote sensor branches, and multipoint arrangements where the controller must be isolated from accumulated cable and connector loading. Select PCA9600D,118 or PCA9600D,112 when those documented ordering and packing configurations match the required assembly process and supply conditions.

Do not substitute PCA9605D or P82B96 solely because they perform related buffering functions. They may differ in channel architecture, timing, enable behavior, logic thresholds, and pin assignment. Because PCA9600D is marked End of Life, a new design should compare its electrical fit with currently supported alternatives and confirm availability through the Request a Quote form. For maintenance of an approved PCA9600D board, retaining the exact device family and package is generally lower risk than introducing a cross-family substitute.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini PCA9600D,118 PCA9600D,112 PCA9600
Package 8-pin SOIC 8-pin SO 8-pin SO SOIC-8
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Device Function Dual bidirectional bus buffer Buffer, re-driver Buffer, re-driver Dual bidirectional bus buffer
Maximum Bus Capacitance 4000 pF 4000 pF 4000 pF 4000 pF
Logic Interface Non-latching, bidirectional Non-latching, bidirectional Non-latching, bidirectional Non-latching, bidirectional
Supported Topology Point-to-point and multipoint Point-to-point and multipoint Point-to-point and multipoint Point-to-point and multipoint

Diferensiator Kunci

  • Supports a larger capacitive I2C bus load (vsP82B96TD,118)
  • Provides two independently buffered paths (vsPCA9605D,118)
  • Maintains a non-latching bidirectional interface (vsPCA9525D,118)
  • Direct ordering variants simplify procurement continuity (vsPCA9600 family designation)

Catatan Desain

Treat the controller side and remote side of each PCA9600D channel as separate I2C nets, and install separate pull-up resistor arrays on each side. A shared pull-up network prevents the buffer from achieving its intended capacitance-isolation benefit. Route the two sides away from each other until the protected isolation point, keep the device ground connection short, and include the connector, cable, branch, and component capacitance when checking the 4000 pF maximum load.

Validate SCL and SDA rise time at the receiver rather than relying only on the 1 MHz device rating. Rise time is set by pull-up resistance, total bus capacitance, supply voltage, leakage, and the highest operating temperature. Start with the manufacturer's recommended pull-up range, measure the worst-case branch with a high-capacitance cable and connector attached, and reduce pull-up resistance only while checking sink-current limits and signal overshoot.

Do not substitute a bus buffer based only on the SO-8 package or the phrase bidirectional buffer. Confirm the complete pin map, supply requirements, logic thresholds, enable behavior, operating frequency, and capacitive-load limit. In particular, PCA9605D and P82B96 are related in function but cannot be assumed to be pin-compatible with PCA9600D. The ordering variants PCA9600D,118 and PCA9600D,112 are preferable because they retain the target device architecture.

Place the PCA9600D directly at the transition between the controller-side and remote bus sections. Keep SDA and SCL traces short and matched where practical, route them away from switching power nodes, and provide an uninterrupted ground return beneath or adjacent to the signal path. Keep test points and long stubs away from the buffered branch because additional capacitance reduces rise time and can undermine the benefit of isolating up to 4000 pF.

Decouple the PCA9600D supply locally and connect it to the quiet ground reference used by the bus interface. Although the component is a logic buffer rather than a regulator, noisy supply or ground routing can affect switching thresholds and signal integrity. Follow the manufacturer's recommended bypass arrangement, keep the capacitor path short, and verify the device's behavior across the 2.7 V to 5.5 V operating supply range.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The manufacturer product page states that the device is End of Life, but the available product excerpts do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.

Pencarian Terkait

PCA9600D datasheet PCA9600D pinout PCA9600D datasheet pdf PCA9600D 1MHz PCA9600D 4000pF PCA9600D SOIC-8 PCA9600D equivalent PCA9600D replacement PCA9600D vs P82B96 PCA9600D vs PCA9605D PCA9600D price PCA9600D stock NXP PCA9600D PCA9600D I2C bus buffer PCA9600D application circuit

Komponen dan Istilah Terkait

NXP Semiconductors PCA9600D PCA9600D,118 PCA9600D,112 PCA9600 PCA9605D PCA9525D P82B96 dual bidirectional bus buffer I2C bus buffer bus repeater interface IC non-latching logic interface bidirectional bus 4000 pF bus capacitance 1 MHz I2C 2.7 V to 5.5 V SOIC-8 surface-mount package point-to-point topology multipoint topology rise time pull-up resistor RoHS REACH
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ