NXP Semiconductors

PCA9605D - 400 kHz I2C Bus Buffer | NXP Semiconductors

MPN: PCA9605D ✓ Aktif
2.7 V to 5.5 V Vdss 8-pin SOIC Package 400 kHz Speed
MOQ: 1 |

PCA9605D Ringkasan

The NXP Semiconductors PCA9605D is a monolithic CMOS two-wire bus buffer designed to extend I2C, SMBus, DDC, PMBus, and similar bus capacity. It operates at up to 400 kHz, buffers one SCL/SDA channel pair, supports a 2.7 V to 5.5 V supply range, and is offered in an 8-pin SOIC package. Its principal function is to regenerate buffered bus signals while electrically separating the source and load sides of the bus.

An I2C bus buffer is an interface IC that divides a two-wire serial bus into two segments and isolates their electrical loading. The PCA9605D allows each segment to operate within its permissible bus capacitance, extending the usable bus when long cables, multiple branches, or additional peripheral loading would otherwise burden the controller. In the device hierarchy, it belongs to the I2C interface-buffer family, bus buffers and repeaters, interface ICs, and integrated circuits.

The PCA9605D includes one buffered SDA channel and one buffered SCL channel. Operating voltage of 2.7 V to 5.5 V supports both 3.3 V and 5 V systems, while the 400 kHz maximum bus frequency covers standard- and fast-mode I2C communication. The monolithic CMOS implementation provides bidirectional signal buffering in an 8-pin SOIC package rated for industrial-temperature operation from -40 °C to +85 °C.

The buffered architecture reduces the capacitive load presented to the upstream bus controller by placing the source-side and load-side segments behind the buffer. This can improve bus signal integrity when a design contains multiple branches, connector segments, or distributed sensors. The device is intended for bus segmentation rather than level translation, so the source and destination domains should use compatible logic voltage levels.

Typical uses include industrial sensor networks, server-management buses, display-control interfaces, power-system PMBus connections, and embedded systems that divide I2C traffic across multiple PCB or cable segments. The buffer is also suitable for SMBus and DDC arrangements where the controller must communicate beyond the loading allowed by a direct bus connection.

PCB implementation requires correct pull-up placement and short, clean routing between the controller, buffer, and downstream devices. Place the input-side pull-ups near the active bus controller and the output-side pull-ups near the buffered load, then keep both SDA and SCL routes short and away from switching-node and high-current paths. Verify rise-time, fall-time, capacitance, and timing margins with the complete board configuration.

This product overview combines manufacturer application information, package and interface characteristics, commercial sourcing guidance, and practical PCB considerations for engineers evaluating the PCA9605D. Use the Request a Quote form on this page for current availability, lead time, and commercial terms.

Alternatif penggantian untuk PCA9605D — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian PCA9605D (sama faktor bentuk dan footprint).

PCA9600D,118

✅ Drop-In
NXP Semiconductors
📦 8-pin SOP
Dual bidirectional I²C-bus buffer / ReDriver · 2 (SDA + SCL) · 1 MHz · 4000 pF · 2.5 V to 15 V · Standard, Fast, Fast-mode Plus (Fm+) I²C-bus · Internal (no DIR pin required) · Non-latching

Kontak untuk harga

Lihat Datasheet →

PCA9605D Spesifikasi

Device Type Monolithic CMOS two-wire bus buffer
Supported Bus Protocols I2C, SMBus, DDC, PMBus, and similar two-wire buses
Maximum I2C Bus Frequency 400 kHz
Supply Voltage Range 2.7 V to 5.5 V
Buffered Bus Channels 1 two-wire channel
SDA Channels 1 channel
SCL Channels 1 channel
Input Lines 1
Output Lines 1
Rentang Suhu Kerja -40 °C to +85 °C
Temperature Grade Industrial
Package Type 8-pin SOIC
Package Code SOP
Terminal Count 8 terminals
Terminal Form Gull wing
Tipe Mounting Surface mount
Manufacturing Technology CMOS

PCA9605D sop Diamant Konfigurasi Panduan

Konfigurasi pin untuk PCA9605D (sop pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai sop untuk PCA9605D

Tidak ada data diatribut pin yang tersedia untuk PCA9605D.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

PCA9605D cocok untuk 6 aplikasis: Industrial Sensor Bus Segmentation, Power Management PMBus Isolation, Server Management Interface Buffering, Display and DDC Interface, Embedded Multi-Branch I2C Network, Cable-Connected Peripheral Network.

🏭

Industrial Sensor Bus Segmentation

The PCA9605D fits industrial I2C sensor networks when a controller must communicate with distributed sensors beyond the load of a direct bus connection. Its one SDA channel and one SCL channel regenerate the two-wire signals while separating the source-side and load-side bus capacitance. The 400 kHz operating limit accommodates standard Fast-mode I2C traffic, and the -40 °C to +85 °C range supports industrial equipment. Place separate pull-ups on each bus segment and verify timing against the maximum cable length and total capacitance.

⚡

Power Management PMBus Isolation

The PCA9605D can separate a PMBus controller from a load segment containing power converters or management devices. By buffering both SCL and SDA, it allows each side to retain its own pull-up network and permissible bus capacitance, which is useful when the controller and monitored hardware are separated by wiring or a connector. The 2.7 V to 5.5 V operating range supports common embedded power rails, while the 400 kHz limit covers typical management-bus traffic. Validate timing at maximum bus loading and review the exact channel connections.

🖥️

Server Management Interface Buffering

The PCA9605D is appropriate for a server-management topology that distributes SCL and SDA communications across a backplane or cable segment. A 400 kHz bus buffer helps isolate the management controller from downstream peripheral loading while preserving standard two-wire signaling. The 8-pin SOIC package supports conventional surface-mount assembly, and the industrial temperature rating covers equipment-room conditions. Use short, differential-like routing where practical, keep pull-ups close to each active segment, and confirm that inrush, rise time, and connector capacitance remain inside the system timing budget.

📺

Display and DDC Interface

The PCA9605D can buffer Display Data Channel or similar display-control traffic when an I2C-compatible display interface is separated from its host controller. Its paired SDA and SCL channels preserve the two-wire connection while isolating the two bus segments, and the 400 kHz ceiling is suitable for conventional DDC traffic. The 2.7 V to 5.5 V supply range allows use in mixed-voltage embedded systems, although it does not perform voltage translation. Confirm compatible logic thresholds, place pull-ups on each side, and route the pair away from display switching regulators to minimize coupled noise.

🧩

Embedded Multi-Branch I2C Network

The PCA9605D supports a multi-branch embedded I2C architecture by dividing the network into buffered sections. One input side remains connected to the controller, while the output side drives a group of peripherals with its own capacitance and pull-up arrangement. This arrangement is useful in systems that combine several connector branches or peripheral groups that cannot be supported reliably from one direct bus node. The 400 kHz limit and 2.7 V to 5.5 V range support common embedded interfaces, but each segment must be checked independently for capacitance, logic levels, and pull-up selection.

🌐

Cable-Connected Peripheral Network

The PCA9605D is useful for cable-connected I2C peripherals where capacitance accumulated along wiring would otherwise reduce timing margin. Buffering SDA and SCL allows the controller-side and peripheral-side capacitance budgets to be handled independently, while the 400 kHz limit supports Fast-mode communication. The 8-pin SOIC package permits compact placement near a connector or branch point. Keep both conductors routed together, minimize stubs, use appropriate pull-up resistance, and verify rise and fall times with the cable and peripheral capacitance present rather than relying only on bench conditions.

What is the PCA9605D?
The PCA9605D is an NXP Semiconductors monolithic CMOS buffer for I2C, SMBus, DDC, PMBus, and similar two-wire buses. According to the NXP product information, it buffers both SCL and SDA lines so the maximum permissible bus capacitance can be maintained on each side of the device. It provides one buffered two-wire channel, supports 400 kHz operation, and is packaged in an 8-pin SOIC.
What is the operating voltage range of PCA9605D?
The PCA9605D operates from 2.7 V to 5.5 V, covering conventional 3.3 V and 5 V embedded systems. The NXP product page identifies the device as a monolithic CMOS bus buffer, while distributor technical listings identify its 2.7 V to 5.5 V operating range. The part is a bus buffer rather than a voltage-level translator, so the buffered source and destination systems should use compatible logic levels.
What is the maximum I2C frequency supported by PCA9605D?
The PCA9605D supports I2C operation up to 400 kHz. NXP describes the device as a two-wire bus buffer for I2C-bus, SMBus, DDC, PMBus, and related systems, and the distributor product listing identifies the 400 kHz operating frequency. Actual system margin depends on bus capacitance, pull-up resistance, cable length, clock stretching behavior, and the rise and fall times of the complete bus.
Where can I download the PCA9605D datasheet PDF?
The PCA9605D datasheet and technical information are available from the official NXP product page at https://www.nxp.com/part/PCA9605D. Open the datasheet link from that page to obtain the manufacturer document, then use its pin-description table, electrical characteristics, application circuit, and recommended operating conditions when finalizing a PCB design. The manufacturer datasheet is the controlling reference for pin connections and bus behavior.
Where can I find the PCA9605D pinout?
The PCA9605D uses an 8-pin SOIC package, and its pin assignments are shown in the manufacturer datasheet available from the official NXP product page. Assign SDA, SCL, supply, and ground connections from the pin-description table rather than inferring them from package orientation. Because the component buffers both SCL and SDA, correct channel assignment is essential to avoid connecting a data line to a clock input.
Can PCA9605D extend an I2C bus?
Yes, the PCA9605D can extend and segment an I2C bus by buffering the SCL and SDA conductors. According to the NXP product description, the buffer increases the usable bus load by allowing permissible bus capacitance on both sides of the device. It is most useful where a direct controller connection would exceed the capacitance budget or where separate pull-up domains are required on the source and load sides.
Is PCA9605D in stock?
The PCA9605D is listed as active, but current quantity and delivery schedules can change with demand and manufacturing conditions. Use the Request a Quote form on this page to request the current stock position, minimum order quantity, and lead time for the exact NXP ordering code. The manufacturer part designation is PCA9605D, with PCA9605D,118 used for the distributor-listed tape-and-reel ordering option.
What is the price of PCA9605D?
Current commercial pricing for PCA9605D is best obtained through the Request a Quote form on this page. The form allows the exact ordering code, requested quantity, and delivery requirements to be reviewed before a firm quotation is prepared. Because distributor inventory and volume pricing can change rapidly, this page does not present a static unit price that could become stale.
What is the lead time for PCA9605D?
The current lead time for PCA9605D depends on requested quantity, order code, inventory position, and production scheduling. Use the Request a Quote form on this page with the required quantity and target delivery date to obtain a current commitment. NXP lists the PCA9605D as an active bus-buffer product, which supports ongoing sourcing, but a production schedule should not be assumed without a quotation.
PCA9605D vs PCA9600D: which is better for an I2C bus buffer?
The PCA9605D is the better starting choice when the design specifically requires a simple 400 kHz two-wire bus buffer with one SDA and one SCL channel. The PCA9600D is also offered in an 8-pin SOP package and is shown as active in the comparison information, but the buffer configuration must be checked against the required channel count and direction. Both share the package family, yet equivalent packaging alone does not replace functional verification.
What is the difference between PCA9605D and PCA9511AD?
The PCA9605D is a simple two-wire bus buffer with one input and one output, whereas the PCA9511AD is identified as a hot-swappable I2C and SMBus buffer. Both are listed in an 8-pin SOP format, but hot-swap behavior and input-line arrangement are functional differences that can affect system startup and isolation requirements. Use PCA9511AD when hot-plug support is required; use PCA9605D for straightforward source-to-load bus segmentation.
When should I choose PCA9605D instead of PCA9600D?
Choose PCA9605D when a single 400 kHz SDA/SCL buffer with one input and one output satisfies the bus-segmentation design. Choose PCA9600D when its documented directionality or channel arrangement better matches a bidirectional or multi-segment architecture. Because both devices use an 8-pin SOP package, compare enable behavior, channel direction, and power-loss state—not just footprint—before making the substitution.
Is PCA9605D suitable for industrial sensor and power systems?
The PCA9605D is suitable for industrial-temperature designs because its specified operating range is -40 °C to +85 °C. Its 400 kHz two-wire buffering and 2.7 V to 5.5 V supply range suit I2C, SMBus, DDC, and PMBus-related measurement or control systems. Validate the complete bus timing and pull-up network at the lowest operating voltage and maximum cable capacitance.
What can replace PCA9605D?
PCA9600D is the closest verified same-manufacturer candidate because it uses the same 8-pin SOP package and appears in a direct specification comparison with PCA9605D. The PCA9605D is a simple one-channel two-wire buffer, so channel direction, bus frequency, voltage range, and power-loss behavior must be checked before accepting the substitution. No cross-brand part should be treated as drop-in without manufacturer pin and electrical verification.
What are the key specifications of PCA9605D that engineers should know?
The PCA9605D combines a 400 kHz maximum I2C frequency, a 2.7 V to 5.5 V supply range, one buffered SDA channel, one buffered SCL channel, and an industrial temperature range of -40 °C to +85 °C. It is a monolithic CMOS device in an 8-pin SOIC package. These figures define its principal use as an I2C, SMBus, DDC, or PMBus bus-segmentation element rather than a general-purpose logic buffer.
Is there a verified cross-brand drop-in replacement for PCA9605D?
No verified cross-brand drop-in replacement is established for PCA9605D by the available manufacturer and distributor documentation. Its 8-pin SOIC footprint and one-channel 400 kHz bus-buffer function are specific enough that an apparently similar device can differ in channel direction, logic thresholds, enable behavior, or power-loss isolation. Request manufacturer cross-reference assistance or use the Request a Quote form for engineering review before approving a second-source part.

Data referensi engineering untuk PCA9605D — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the PCA9605D when the design needs a straightforward 400 kHz I2C bus segment with one SDA and one SCL channel, a 2.7 V to 5.5 V supply, and industrial-temperature operation. It is particularly useful when the controller cannot safely drive the total peripheral or cable capacitance and separate pull-up domains are acceptable. PCA9600D is the closest same-manufacturer 8-pin SOP candidate, but verify its channel direction, enable behavior, frequency rating, and power-loss state before using it as a drop-in substitute. The PCA9511AD is better considered when hot-swappable bus behavior is required rather than simple source-to-load segmentation. Do not select a generic SOIC-8 buffer unless the manufacturer explicitly confirms pin-to-pin compatibility, matching bus capacitance, logic thresholds, and isolation behavior. The PCA9605D does not translate voltage levels, so both sides of the buffer must use compatible electrical domains.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini PCA9600D
Package 8-pin SOIC 8-pin SOP
Brand NXP Semiconductors NXP Semiconductors
Device Function Simple two-wire bus buffer Two-wire bus buffer
Lifecycle Status Active Active

Diferensiator Kunci

  • Single bidirectional two-wire buffer for direct SCL and SDA segmentation (vsPCA9600D)
  • Industrial operating range for embedded and industrial equipment (vsPCA9600D)
  • Supports 2.7 V to 5.5 V system rails (vsPCA9600D)

Catatan Desain

Install separate pull-up resistors on the controller-side and buffered-load-side SDA and SCL nets. Do not leave the two bus segments tied together through pull-ups, because that defeats the isolation and capacitance-management purpose of the buffer. Select resistor values from the actual bus capacitance, pull-up voltage, leakage current, and required rise time. Place the load-side pull-ups near the PCA9605D output-side devices and the input-side pull-ups near the controlling master.

Route SDA and SCL as a closely coupled pair and keep the traces short, continuous, and away from switching nodes, inductors, high-current returns, and display or power-converter outputs. Minimize branch stubs because every stub adds capacitive loading and can create timing-margin problems. If the buffer sits near a connector or cable, provide adequate ground return, minimize loop area, and confirm that connector and cable capacitance are included in the worst-case bus calculation.

The PCA9605D is a bus buffer, not a voltage-level translator. Do not use it to connect source-side and load-side devices with incompatible logic thresholds, and do not assume that the 2.7 V to 5.5 V supply specification authorizes level translation. Confirm the enable requirements, channel direction, power-loss behavior, pull-up voltages, and maximum operating frequency from the manufacturer datasheet before placing the device in a new bus topology.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The industrial temperature grade and surface-mount package are identified, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is stated in the available product information.

Pencarian Terkait

PCA9605D datasheet PCA9605D pinout PCA9605D datasheet pdf PCA9605D equivalent PCA9605D replacement PCA9605D cross reference PCA9605D vs PCA9600D PCA9605D 400kHz I2C buffer PCA9605D 8-SO package NXP PCA9605D I2C bus buffer PCA9605D price PCA9605D stock PCA9605D application circuit PCA9605D SOIC-8 footprint

Komponen dan Istilah Terkait

NXP Semiconductors PCA9605D PCA9600D PCA9511AD PCA9508D I2C bus SMBus Display Data Channel PMBus two-wire bus buffer bus buffer bus repeater interface IC CMOS I2C interface SCL SDA bus capacitance pull-up resistor 400 kHz Fast-mode I2C 2.7 V to 5.5 V 8-pin SOIC SOIC family surface-mount package industrial temperature grade
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ